OK so I have a Sprint Samsung Galaxy S4 SPH-L720T I have rooted and flashed to Page plus with no problems. I reflashed back to stock to NAF and did all the Updates to NG5. I have enabled Developer options and have usb debug enabled. I cannot for life of get the phone to show up as usb debugging enabled. So now I am having trouble with anything I do with DFS or Wireless Workshop that requires usb debugging to be used. I have tried different usb cords and different usb ports and have uninstalled and reinstalled samsung drivers and still cant get the phone itself to show usb debugging enabled in the pull down screen on the phone. Any help or suggestions would be greatly appreciated. I have searched and found one post with a similar problem but no resolutions to it. Mods and admins I apologize if this is posted in the wrong section/forum please move if need be. Thanks.
Hello guys, I need help to root my phone. After I click on USB Debugging (on Developer options), the option turns off itself and then I can't connect with the PC. The problem is on the phone, I have updated the drivers on pc, installed Lenovo Manager but didn't work. What should I do? Thanks!
Nobody?
Nobody? I think the problem is like usb debug process crashing on android, because it turns off itself.
Hi, all. I'm a dumbass and tried to update my phone today without making sure I was doing it right. Long story short, I have a recovery that doesn't work with N (TWRP, my device was on preview #2) and a good bootloader. However, when I updated, I forgot to turn on usb debugging. Now that the update failed, I can only boot to recovery (doesn't work) and the bootloader. NRT doesn't recognize the phone because debugging isn't enabled.
Can someone walk me through getting my phone running again?
Never mind. I got it. I have a USB hub that my phone doesn't like, apparently.
(Had to repost since no one replies on the sprint section of the G2)
So my friend bought an LS 980 which still has 4.4.2 Kitkat on it. but it doesnt show any networks.
Im trying to unlock this phone but somehow USB Debugging isnt showing up on the notification tab.
and yes i did a lot of research, (installed drivers both adb and LG drivers already and checked usb debugging in developer options)
I've been struggling to get it working since yesterday.
Hope someone can help me out so i can return this phone to him asap thanks
(been through a lot of pages already about usb debugging but none help though.....)
*bump*
xDroidZz said:
(Had to repost since no one replies on the sprint section of the G2)
So my friend bought an LS 980 which still has 4.4.2 Kitkat on it. but it doesnt show any networks.
Im trying to unlock this phone but somehow USB Debugging isnt showing up on the notification tab.
and yes i did a lot of research, (installed drivers both adb and LG drivers already and checked usb debugging in developer options)
I've been struggling to get it working since yesterday.
Hope someone can help me out so i can return this phone to him asap thanks
(been through a lot of pages already about usb debugging but none help though.....)
Click to expand...
Click to collapse
makr sure to check usb cable or changr it.
try with different cable.
check usb connection mode not to charge only.
check usb debugging option with cable pluged in and connected to mobile weither debugging option is visible or dim..
aslamjarh said:
makr sure to check usb cable or changr it.
try with different cable.
check usb connection mode not to charge only.
check usb debugging option with cable pluged in and connected to mobile weither debugging option is visible or dim..
Click to expand...
Click to collapse
Thanks for the reply, but usb debugging wouldn't come out in the notification tab somehow. it grays out after i checked it in developer options and plugged in using the USB, i used Sony and samsung cables btw, is LG usb cables really required?. and i tried all modes already when i plug it in, PTP, MTP and the other ones.
Is it the cables the problem? been stuck for many days already.
Hi,
since one of the latest Oxygen OS updates, my OnePlus 5 is not able to connect to any PC anymore as long as USB-Debugging is enabled. It's not showing up in Device-Manager nor lsusb on multiple PCs, I've tried rebooting multiple times, safe mode, clearing settings data, but nothing seems to have changed it's behavior - when turning on USB Debugging, all USB connections seem to get lost, including data and charging. A curious thing I noticed is that the Android-System notification that lets you switch USB modes sticks around when unplugging in this state, even after disabling debugging again, until the phone is restarted.
Is this a common issue? I haven't been able to find anything about it on XDA or on their official product forums which seem to be pretty dead, but it's a pretty big problem for me since I need this phone for app development.
Thanks!
armibu said:
Hi,
since one of the latest Oxygen OS updates, my OnePlus 5 is not able to connect to any PC anymore as long as USB-Debugging is enabled. It's not showing up in Device-Manager nor lsusb on multiple PCs, I've tried rebooting multiple times, safe mode, clearing settings data, but nothing seems to have changed it's behavior - when turning on USB Debugging, all USB connections seem to get lost, including data and charging. A curious thing I noticed is that the Android-System notification that lets you switch USB modes sticks around when unplugging in this state, even after disabling debugging again, until the phone is restarted.
Is this a common issue? I haven't been able to find anything about it on XDA or on their official product forums which seem to be pretty dead, but it's a pretty big problem for me since I need this phone for app development.
Thanks!
Click to expand...
Click to collapse
Open beta or stable? Which version exactly?
strongst said:
Open beta or stable? Which version exactly?
Click to expand...
Click to collapse
I'm running the current stable Oxygen OS 5.1.5(ONEPLUS A500_23_180808), unrooted. I'll try installing the new beta, since fastboot mode still gets recognized by PCs.
Ok, so beta 19 didn't change anything about it - still the same issue and behavior when unplugging. Not sure what else to do other than trying to wipe it, which would be pretty annoying
I have the same problem and I can not solve it neither with usb debuginc or mtp and I see that Oneplus is not bothering att all about this problem. I need to transfer some data from my computer to my phone and I am stucked. I am thinking sending to warranty or sell it! I was a big fun but now........
lhoria46 said:
I have the same problem and I can not solve it neither with usb debuginc or mtp and I see that Oneplus is not bothering att all about this problem. I need to transfer some data from my computer to my phone and I am stucked. I am thinking sending to warranty or sell it! I was a big fun but now........
Click to expand...
Click to collapse
You have not the same problem... Op wants to transfer data while usb debugging is on. But it works only when usb debugging is off.
Yes I have. O tried all the combination but it is just not working, with debugging on or off. I should aopreciate litle help.
Thank you
lhoria46 said:
Yes I have. O tried all the combination but it is just not working, with debugging on or off. I should aopreciate litle help.
Thank you
Click to expand...
Click to collapse
The op can transfer files with USB debugging disabled. You can not. So you have another issue please read OP again
Thanks smart guy but can I solve this problem? Even op want to transfer data from pc to the phone and reverse with usb debugg off I can not. It is written usb not recognize.
Thank you in advance.
armibu said:
Ok, so beta 19 didn't change anything about it - still the same issue and behavior when unplugging. Not sure what else to do other than trying to wipe it, which would be pretty annoying
Click to expand...
Click to collapse
lhoria46 said:
Thanks smart guy but can I solve this problem? Even op want to transfer data from pc to the phone and reverse with usb debugg off I can not. It is written usb not recognize.
Thank you in advance.
Click to expand...
Click to collapse
I'm on OB19, rooted with magisk 17.2 and with USB debugging enabled or disabled im getting file transfer working on 2 win10 pc's.
The pop-up is immediately present after plugging into USB port(original cable or other USB cable).
Msybe: Toggling file transfer to charging and back can help you?
strongst said:
I'm on OB19, rooted with magisk 17.2 and with USB debugging enabled or disabled im getting file transfer working on 2 win10 pc's.
The pop-up is immediately present after plugging into USB port(original cable or other USB cable).
Msybe: Toggling file transfer to charging and back can help you?
Click to expand...
Click to collapse
I've tried this a few times, the options in that pop-up don't have any effect whatsoever after enabling USB debugging and unplugging/plugging the phone back in. Also tried changing the default setting, which doesn't seem to have any effect either though.
Same for me. No effect att all. I don't lnpw what to do. I have a lot of files in storage and I can not root my phone and try another Rom.
Help!!!
I have done all the possibel combinations.
armibu said:
I've tried this a few times, the options in that pop-up don't have any effect whatsoever after enabling USB debugging and unplugging/plugging the phone back in. Also tried changing the default setting, which doesn't seem to have any effect either though.
Click to expand...
Click to collapse
lhoria46 said:
Same for me. No effect att all. I don't lnpw what to do. I have a lot of files in storage and I can not root my phone and try another Rom.
Help!!!
I have done all the possibel combinations.
Click to expand...
Click to collapse
Have you tried another PC, checked your driver, firewall etc?
Common issue across all devices
Just a suggestion.
Yes I did it on two Pc and with two diffrent cables. One day it worked 3 minutes and the problem suddenly came back without takig off the cabel from Pc.
lhoria46 said:
Yes I did it on two Pc and with two diffrent cables. One day it worked 3 minutes and the problem suddenly came back without takig off the cabel from Pc.
Click to expand...
Click to collapse
And you have which oxygenOS version?
The latest update OEM 8.1.0 version OPC O2 19 BETA but the problems begun before loadin this uodate. The reason I put this one was exact that I wasn't able to do nothing.
lhoria46 said:
The latest update OEM 8.1.0 version OPC O2 19 BETA but the problems begun before loadin this uodate. The reason I put this one was exact that I wasn't able to do nothing.
Click to expand...
Click to collapse
Really strange... OOS 5.1.5 and OB19 and before.
Never had any issues and also others not report such issues