Hi, all. I'm a dumbass and tried to update my phone today without making sure I was doing it right. Long story short, I have a recovery that doesn't work with N (TWRP, my device was on preview #2) and a good bootloader. However, when I updated, I forgot to turn on usb debugging. Now that the update failed, I can only boot to recovery (doesn't work) and the bootloader. NRT doesn't recognize the phone because debugging isn't enabled.
Can someone walk me through getting my phone running again?
Never mind. I got it. I have a USB hub that my phone doesn't like, apparently.
Related
Hey,
i've got a huge problem with my Nexus 7 32 GB 3G. I've had root and i made an update many times without any problem, but once i was making some update of 4.2.2 the device didn't want to turn on and it freezed on Google logo. I tried to do plenty of ways to repair it; unroot, factory reset, wipe... Then i tried to do a flash via Nexus 7 Toolkit, but... there is the problem! How can i do the flash without enabled USB debugging? Is there any way to evade it? Or can I enable USB debugging from my PC for example? HOW??? PLEASE!
Is there anyone who can help me with solving this problem?
Any ideas, recommendations..?
Thank you for all of your responds.:good:
flash a factory image using fastboot...
USB debugging doesn't have anything to do with fast boot mode. Fast boot is the proper way to flash the images.
USB debugging only matters within the booted OS.
You should spend some time learning the right way to do things instead of relying on toolkits.
Sent from my Galaxy Nexus
BerryRide said:
Hey,
i've got a huge problem with my Nexus 7 32 GB 3G. I've had root and i made an update many times without any problem, but once i was making some update of 4.2.2 the device didn't want to turn on and it freezed on Google logo. I tried to do plenty of ways to repair it; unroot, factory reset, wipe... Then i tried to do a flash via Nexus 7 Toolkit, but... there is the problem! How can i do the flash without enabled USB debugging? Is there any way to evade it? Or can I enable USB debugging from my PC for example? HOW??? PLEASE!
Is there anyone who can help me with solving this problem?
Any ideas, recommendations..?
Thank you for all of your responds.:good:
Click to expand...
Click to collapse
Hi, BerryRide...
You don't need USB Debugging enabled (as far I'm aware, it's not possible anyway, in FASTBOOT/BOOTLOADER mode)...
Download the factory stock image for your device, from here...
https://developers.google.com/android/nexus/images.
Shutdown your tablet... and reboot into FASTBOOT/BOOTLOADER mode (Vol Down BUTTON + PowerOn BUTTON)...
Hook your tablet up to your computer, via a USB cable (preferably the USB cable that originally shipped with your tablet)...
And run...
Code:
fastboot devices
This should return a SERIAL NUMBER, indicating you have a FASTBOOT connection, and you can then run whatever FASTBOOT commands you like... including what is in the FLASH-ALL script in the FACTORY STOCK image for your specific device.
Rgrds,
Ged.
Bumping this thread because it just really helped me!!! Thanks @GedBlake!!!!
For the longest time I could never get fastboot or flash-all to work without first enabling USB debugging and much swearing and dealing with permissions. Wound up that my device wasn't getting recognized by Windows at the bootloader. It finally worked after a manual update Device Manager -> Update Drivers using the SDK Manager directory (I subsequently read about in this thread: http://forum.xda-developers.com/showthread.php?t=1583801).
Updating my three Nexii 7 to MRA58V was a breeze this time. Wow- thanks again for the direction.
Hello All,
Basically, while Nexus is on it does not charge or even recognize a charge from anything, and it also does not recognize when plugged in via USB to my PC.
This occurred a week ago, noticeably a few days after installing MultiROM for testing. I thought MultiROM may have been the cause so went entirely back to stock ROM but still not working.
Couple things that I have noticed... When using MultiROM my drivers are no longer recognized as they should, but instead as Andriod bootloader. I had uninstalled and reinstalled new drivers to allow the flash and correction to Stock, which did work, but now nothing even remotely similar to my Nexus is showing up in my Devices. I have double checked with multiple cords, still no luck... I will say that I have not Enabled USB Debugging because I cannot. Every time I attempt to enable USB Debugging, the Nexus freezes up and reboots... I'm thinking this is the root cause of the issue or there is a fluke bad pin issue in my internals of the Nexus...
It seems that I cannot work in fastboot or adp mode as the USB is not recognized...
I've searched for several days for hours at a time for more info on this, but no luck! Any thoughts and help would be helpful!
Thanks!
DTTD said:
Hello All,
Basically, while Nexus is on it does not charge or even recognize a charge from anything, and it also does not recognize when plugged in via USB to my PC.
This occurred a week ago, noticeably a few days after installing MultiROM for testing. I thought MultiROM may have been the cause so went entirely back to stock ROM but still not working.
Couple things that I have noticed... When using MultiROM my drivers are no longer recognized as they should, but instead as Andriod bootloader. I had uninstalled and reinstalled new drivers to allow the flash and correction to Stock, which did work, but now nothing even remotely similar to my Nexus is showing up in my Devices. I have double checked with multiple cords, still no luck... I will say that I have not Enabled USB Debugging because I cannot. Every time I attempt to enable USB Debugging, the Nexus freezes up and reboots... I'm thinking this is the root cause of the issue or there is a fluke bad pin issue in my internals of the Nexus...
It seems that I cannot work in fastboot or adp mode as the USB is not recognized...
I've searched for several days for hours at a time for more info on this, but no luck! Any thoughts and help would be helpful!
Thanks!
Click to expand...
Click to collapse
Try doing a factory reset first, then see if USB debugging works.
If it won't work, could you try downloading a normal recovery on your device and installing without fastboot and adb connection with computer (I think that is possible, not sure). Is download, boot into recovery and flash like a ROM. Sorry if that's all wrong, I did Google but found nothing, yet I'm sure I did that to install a newer version of twrp???
Also, if you have root, could you try using adb over WiFi, this should work the same, although there is no fastboot.
Good luck!
Fallon9111 said:
Try doing a factory reset first, then see if USB debugging works.
If it won't work, could you try downloading a normal recovery on your device and installing without fastboot and adb connection with computer (I think that is possible, not sure). Is download, boot into recovery and flash like a ROM. Sorry if that's all wrong, I did Google but found nothing, yet I'm sure I did that to install a newer version of twrp???
Also, if you have root, could you try using adb over WiFi, this should work the same, although there is no fastboot.
Good luck!
Click to expand...
Click to collapse
Thanks for providing more information on this. I have done a Factory Reset via Settings and also via Recovery, but still not available.
I think I'm making progress with adb via Ubuntu over USB, but USB Debugging still gives the Epic crash and still will not charge while On, which is more just annoying than anything else.
Asus/Google Support are saying it is a physical pin issue, but that doesn't explain why USB Debugging is failing. Does anyone know where the USB files are contained? I'm wondering if I've messed up at the Kernel level. Any thoughts?
About my Nexus - More Info
I forgot that I should provide more information about what I'm running:
Phone: Nexus 7
Android Version: 4.2.2
Kernel version: 3.1.10-g05b777c
Build number: JDQ39
Prior to issue also had:
Recovery: TWRP
ROM: Stock JDQ39
MultiROM: Yes
UPDATE
So after more work on my Ubuntu we have found more information and seem to have narrowed down the issue! :fingers-crossed:
I have been able to flash via Fastboot just fine, which has thus allowed me to get TWRP installed and now I'm back rooted. I still cannot adb via USB though. We've double checked with multiple Nexus 7's of the same type, which allow command: adb devices and their devices will show, while it does not for my device. (Side note: my version of Ubuntu does not "see" the adb command in its pwd so... But tests have been done on other machines and worked...)
So after sifting down to adb issues, we found that in /data/property I'm missing persist.sys.root_access and persist.sys.usb.config ... But creation of persist.sys.usb.config didn't do anything...
So my nexus 4 is rooted and unlocked. Well actually Im not sure, because after updating with the OTA it seems to have lost that capability. Even though there are SU Binaries still there. I cannot get my phone to show up in my computer or Device manager. I have the drivers install and all. I have tried with usb debugging on and off. I have tried in the Fastboot mode. I have tried after a factory reset.
its charging on my computer when its off and with another cable its charginging even its on
I'm at a lost as to what I can do....When I try to go to recovery it says "No Command" or something
help me
Hi all,
I greatly need your help or some advice. I searched for more than 6h yesterday and Im surprised I couldnt find a solution to my problem.
Typical stuff : I broke the screen of my Nexus 4, that is completely stock 5.0.1. The phone is unrooted, bootloader is locked and obviously USB Debugging is disabled.
I need to backup some data from my phone : pictures, notes and if possible my contacts.
When I connect my phone via USB to my PC, I cant browse my files since my screen is locked. My screen is not responding at all, so no way I can unlock it. Only thing I can do is install new applications on my phone, but no way to launch them since I'd need to unlock my screen again.
I have installed adb and fastboot in order to try and use Android Screen Control, but I dont have USB Debugging enabled.
So I read that I could sideload a kernel that has USB Debugging enabled by default.
I got into Recovery Mode, and tried sideloading a zip file containing a Kernel found on the forum, but I always get an error saying the footer is wrong and the signature of the file didnt pass verification. I guess I can only sideload OTA updates ?
I tried fastbooting CWM recovery, that also didnt work.
adb devices command lists my 'recovery' device.
At this stage, all I need is to either be able to unlock my phone so I can access my files via USB (i tried few apps without success), or to enable USB debugging so I can connection using sideload, use Android Screen Control, reset the pattern lock, and backup my phone.
Also, USB OTG isnt enabled by default on Nexus 4, so that's another dead-end
So what are my options ? Where could I find a kernel that has USB Debug enabled, and how can I sideload it considering phone is not rooted, and bootloader is locked (unlocking it and whipping data defies the purpose).
THANK YOU for any advice!
There is nothing you can do with a locked bootloader and no custom recovery. Sorry man, but you're not going to be able to access your data.
Sent from my Nexus 9 using XDA Free mobile app
I've exactly the same problem, but my bootloader is unlocked and I'm rooted.
I'm also on a Nexus 4 with 5.0.1 and I'm trying to get control over my device from my Windows PC. But I don't know which kernel to use and how (yet) to enable USB debugging.
Help is appreciated.
Joakim_Lind said:
I've exactly the same problem, but my bootloader is unlocked and I'm rooted.
I'm also on a Nexus 4 with 5.0.1 and I'm trying to get control over my device from my Windows PC. But I don't know which kernel to use and how (yet) to enable USB debugging.
Help is appreciated.
Click to expand...
Click to collapse
All you need is a custom recovery to boot into to access your files. If you don't have one, download the latest version of twrp from here. http://techerrata.com/browse/twrp2/mako
Then flash that using fastboot. If you need help let us know.
Sent from my Nexus 5 using XDA Free mobile app
Hmm, "error: cannot load 'open recovery-twrp-2.3.2.3-mako'.
Sure usb-debugging doesn't have to be enabled?
Joakim_Lind said:
Hmm, "error: cannot load 'open recovery-twrp-2.3.2.3-mako'.
Sure usb-debugging doesn't have to be enabled?
Click to expand...
Click to collapse
You have an ancient version of twrp. Install the latest. I'm positive you don't need usb debugging enabled.
Sent from my Nexus 5 using XDA Free mobile app
Yes, you're so right! I also missed .img in the command
But what kernel would you recommend me to use so I have usb-debugging I can have usb-debugging enabled?
I am in almost completely the same situation! My N4 fell yesterday and shattered at the bottom right hand corner. No the touch screen doesn't work and there are sections of the screen that are black. However, I have...
root
cwm recovery
stock 5.0.1 kernel
windows 7
adb not working
fastboot working
usb debugging disabled
a need for usb debugging to become enabled.
I would like a kernel with usb debugging enabled and instructions on how to install it. Or if you have another fix, instructions on that.
Hi guys, a got a big problem. Today i've bought an used S5. I always root my phones an install costum roms via twrp, so I wanted to do the same for the S5.
I don`t want that my knox increased so i tried the method with flashing the kernel. Normally nothing new. So I entered the download mode an start. Now I cant start the phone it always start in download mode with the error message " could not do normal boot " . As I wrote the phone is bought today and I forgot to enable usb debugging. What could I do know? (At the moment I downlaod a custom rom, but the download is really slow, and try to throw it by adb sideload on the galaxy. Dont know if it words, but didn't hinkt it will work.)
Has anybody a solution for my issue?
Thanks in advanse
Sagin
AMAIK, download mode works regardless of setting for USB debugging. The only problem is, that in some cases the driver gets installed only when USB debugging is enabled.
tetakpatalked from Nexus 7 flo
I agree with @tetakpatak. Try flashing stock ROM through Odin (even with USB Debugging set to off) and report back if it works I too rooted my S5 the same day I got it