HTML:
[QUOTE][/QUOTE]
Hi
I have bricked my phone with a failed TWRP install. The data partition became corrupted and I need to restore. I have tried to move UPDATE.zip via ADB but phone says not enough space. Should I flash new img files (system, data)? If so, where can I get these? My model is VNS-L22 dual SIM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks
Did you try with dload from sd card ? you can try to find a rom with firmware finder-here or from http://pro-teammt.ru-here, its best to download FullOTA-MF-PV version.
You can always try this Huawei Multi-Tool 8
I'm in simmilar situation. Cannot format, convert /data partiton.
Not sure which version of ROM I've had. Probably stock B504 -> EliteROM - fault with boot --> tried app back to stock and now from version from shown by some adb command B130.
Which version should I put inyo dload to start getting back to stock?
TyDraniu said:
I'm in simmilar situation. Cannot format, convert /data partiton.
Not sure which version of ROM I've had. Probably stock B504 -> EliteROM - fault with boot --> tried app back to stock and now from version from shown by some adb command B130.
Which version should I put inyo dload to start getting back to stock?
Click to expand...
Click to collapse
Hi dude,
if you try to be a little more detailed
about the recovery you used and the last stock firmware you had
and what you did trying to get back from EliteRom maybe,
I say maybe someone could help you...
Cheers
The thing is that I'm not sure
I've tried so many combination that I'm not sure what was the last.
Last working soft was latest official firmware from huawei p9 lite in Poland - I think it was B504.
Then I've tried to install [Elite ROM][EMUI 5.1.1] Elite ROM v7.7 - it wont boot up, i've get bootloop.
Then I tried to use dload folder to get back to stock - VNS-L21C432B130 it was installed succesfully but system wont boot up - bootloop again.
TyDraniu said:
The thing is that I'm not sure
I've tried so many combination that I'm not sure what was the last.
Last working soft was latest official firmware from huawei p9 lite in Poland - I think it was B504.
Then I've tried to install [Elite ROM][EMUI 5.1.1] Elite ROM v7.7 - it wont boot up, i've get bootloop.
Then I tried to use dload folder to get back to stock - VNS-L21C432B130 it was installed succesfully but system wont boot up - bootloop again.
Click to expand...
Click to collapse
Ok man i will try to help you but beginning from now
you should do one thing at a time...
Due the fact you tried to flash B130 your bootloader could be re-locked again,
so boot into the fastboot mode and unlock it again... the device should restart in TWRP recovery mode...
Once you're in TWRP tap WIPE > FACTORY RESET > restart system.
If won't boot it need to be unbricked...
PHONE: Unlocked
FRP: Unlocked
In this moment there is no TWRP:
power + vol + = EMUI: reboot, wipe, wipe.
TyDraniu said:
PHONE: Unlocked
FRP: Unlocked
In this moment there is no TWRP:
power + vol + = EMUI: reboot, wipe, wipe.
Click to expand...
Click to collapse
Dude boot into the EMUI e-recovery and do a factory reset + wipe cache..
Doesn't it boot to system ?
It doesn't.
After boot it's stuck on black screen.
TyDraniu said:
It doesn't.
After boot it's stuck on black screen.
Click to expand...
Click to collapse
Boot into the fastboot mode and unlock again the bootloader.
Try then to reboot to system.
As I said bootloader is unlocked. When I've executed : fastboot oem get-bootinfo i've received: (bootloader) unlocked
when i've executed: fastboot oem unlock "my_unlock_code" i've received FAILED (remote: already fastboot unlocked)
other suggestions?
--------------------------------
I'm not sure if it's a progress but...
1. fastboot: flash working twrp
2. twrp flash oeminfo.img for L21c432 DS
3. restart - auto factory reset
4. Flash with Multi-Tool: boot, system, recovery, cust from b160
5. put into SDcard dload\update.app from b160
6. phone started booting and goes to huawei logo with some shiny effect - and stuck on it .....
What I'm doing wrong?
TyDraniu said:
As I said bootloader is unlocked. When I've executed : fastboot oem get-bootinfo i've received: (bootloader) unlocked
when i've executed: fastboot oem unlock "my_unlock_code" i've received FAILED (remote: already fastboot unlocked)
other suggestions?
--------------------------------
I'm not sure if it's a progress but...
1. fastboot: flash working twrp
2. twrp flash oeminfo.img for L21c432 DS
3. restart - auto factory reset
4. Flash with Multi-Tool: boot, system, recovery, cust from b160
5. put into SDcard dload\update.app from b160
6. phone started booting and goes to huawei logo with some shiny effect - and stuck on it .....
What I'm doing wrong?
Click to expand...
Click to collapse
Seems all good, apart after you flashed oeminfo.img you have to flash custom.bin file together.
(maybe you need the TOOLKIT (take august 2017 release) to flash oeminfo.img&custom.bin files)
This should re-lock the bootloader, so when the process ends, reboot to fastboot , unlock again
the bootloader and forwards with the other steps..
At the end of the whole process reboot to recovery and do a factory reset + clear cache...
"(maybe you need the TOOLKIT (take august 2017 release) to flash oeminfo.img&custom.bin files)" - to do it I have to put phone into ADB mode.
oeminfo.zip I can flash in TWRP.
I don't know how to flash custom.bin
TyDraniu said:
"(maybe you need the TOOLKIT (take august 2017 release) to flash oeminfo.img&custom.bin files)" - to do it I have to put phone into ADB mode.
oeminfo.zip I can flash in TWRP.
I don't know how to flash custom.bin
Click to expand...
Click to collapse
Hi dude,
so look into the zip oeminfo.
If there are both oeminfo.img and custom.bin files
you are ok to flash in TWRP.
( in your previous post you wrote you flashed oeminfo.img file, not flashable zip )
If into the zip there is only oeminfo.img file you need that custom.bin file.
In oeminfo.zip file there is always only oeminfo.img and some other config files.
Every time when I find custom.bin it is always a standalone file. I cannot find zip to flash on TWRP with custom.bin
TyDraniu said:
In oeminfo.zip file there is always only oeminfo.img and some other config files.
Every time when I find custom.bin it is always a standalone file. I cannot find zip to flash on TWRP with custom.bin
Click to expand...
Click to collapse
Don't know dude, maybe you used some wrong files...
This time use this steps:
Install and use TWRP 3.0.2-0 ( this should be Meticulus recovery )
THIS oeminfo.zip file is a L21C432DS flashable one ( took from htcmania site )
The direct LINK to download L21C432B160 update.zip ( using FIRMWARE FINDER )
from with extract update.app and use DLOAD method.
1 - Reboot recovery and flash the oeminfo.zip file.
2 - Once finished the device should reboot to twrp recovery.
3 - Power off the device. Extract the SD card and with your PC format it. ( backup your files )
4 - Create the DLOAD folder in your SD and paste update.app you extracted from update.zip into it.
5 - Put the SD into the device and use three buttons ( vol+&vol-&power ) to start the flash process.
6 - When finished reboot to e-recovery ( vol+ and power buttons ) and do factory reset + clear cache.
7 - Dude you should be ok now.
P.S.: THIS oeminfo.zip is took from @k1ll3r8e personal repo ( can be flashed with the toolkit in fastboot mode )
Unlocked bootloader, TWRP 3.0.2-0 (Meticulus recovery ) installed.
1. - Reboot recovery and flash the oeminfo.zip file. - done
2 - device doesn't reboot, I've rebooted it manually - reboot recovery.
"Your device has failed verification" appeared and device boot into huawei recovery (options: reboot, wipe data/factory and wipe cache).
3. no option to turn off.
4. I've made SDcard.
5. restart by power and vol+ and vol - : installing update.............
6. When finished phone restarted automatically, i've pressed vol+ and got into recovery, done wipe data/fr and wipe cache and reboot ............... and ....................... black screen.
Now I'm waiting to be sure ~ 15 minutes...
Without any changes.
I've tried the same with B130 - same result. From power on there is logo huawei na blank screen with wisible backlight.
Any ideas?
TyDraniu said:
Unlocked bootloader, TWRP 3.0.2-0 (Meticulus recovery ) installed.
1. - Reboot recovery and flash the oeminfo.zip file. - done
2 - device doesn't reboot, I've rebooted it manually - reboot recovery.
"Your device has failed verification" appeared and device boot into huawei recovery (options: reboot, wipe data/factory and wipe cache).
3. no option to turn off.
4. I've made SDcard.
5. restart by power and vol+ and vol - : installing update.............
6. When finished phone restarted automatically, i've pressed vol+ and got into recovery, done wipe data/fr and wipe cache and reboot ............... and ....................... black screen.
Now I'm waiting to be sure ~ 15 minutes...
Without any changes.
I've tried the same with B130 - same result. From power on there is logo huawei na blank screen with wisible backlight.
Any ideas?
Click to expand...
Click to collapse
Damn, my apologies dude :angel:,
i forgot a line between point 1 & 2, let's call it 1.1.
So > 1.1 - After you flash oeminfo.zip go in main menu of TWRP
and tap reboot then bootloader.
Connect to pc and unlock again the bootloader.
Proceed with point 2....
1. - Reboot recovery and flash the oeminfo.zip file. - done
1.1 - After flash oeminfo.zip go in main menu of TWRP, reboot to bootloader, connect to pc and unlock again the bootloader.
2 - device reboot to twrp.
3. turn off.
4. I've made SDcard.
5. restart by power and vol+ and vol - : installing update.............
6. When finished phone restarted automatically, i've pressed vol+ and got into recovery, done wipe data/fr and wipe cache and reboot and power on there is logo huawei na blank screen with wisible backlight.... again
Everything goes as You wrote...
I'm loosing rest of hope...
Maybe it's physicaly broken somehow?!
TyDraniu said:
1. - Reboot recovery and flash the oeminfo.zip file. - done
1.1 - After flash oeminfo.zip go in main menu of TWRP, reboot to bootloader, connect to pc and unlock again the bootloader.
2 - device reboot to twrp.
3. turn off.
4. I've made SDcard.
5. restart by power and vol+ and vol - : installing update.............
6. When finished phone restarted automatically, i've pressed vol+ and got into recovery, done wipe data/fr and wipe cache and reboot and power on there is logo huawei na blank screen with wisible backlight.... again
Everything goes as You wrote...
I'm loosing rest of hope...
Maybe it's physicaly broken somehow?!
Click to expand...
Click to collapse
Hope no dude...
Try the rollback package, maybe something gone wrong going from android 7 to android 6.
THIS is the L21 rollback package (C900B300)
With your PC format the SD card nd create a DLOAD folder.
Extract update.app from the package, put it in the DLOAD folder and do three buttons method.
When finished turn off the device and extract the SD.
Remove the update.app from DLOAD folder and paste the update.app you
extracted from update.zip (B160) into it.
Boot again with three button method to flash the firmware..
The same, reboot to e-recovery and do factory reset + clear cache..
Hope this will work.
Related
Hi all!!!
I'm screwed!! :crying::crying::crying:
I think I bricked the phone!
Please help!!
Backups files I already have
A-WRP is correctly installed and I made a full nandroid backup.
B-I have a full partitions backups made with Partitions Backup and Restore App (Root access required). I backup all the partitions, all of them in raw mode. All the files are *.img ready to flash with fastboot.
C-I have a full B132 ALE-L21 stock ROM that was working perfectly before.
The problem
1-adb is not recognizing the device
2-fastboot is not recognizing the device
3-I cannot enter TWRP
4-Huawei EMUI 3 buttons (volume up + volume down + on/off button) function doesn't start neither (I'm trying to force the update to B132 ROM)
5-The phone enters directly to Rescue Mode and says:
error! Func NO : 8 (hifi image) Error NO : 1 (Security verify faild!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So the phone is still working and I got this RESCUE MODE screen but I can't do anything when this screen is displayed.
Any idea? What can I try?
Please, I really need your help, anything you can imagine to try please, let me know!!!
Thanks in advance!!!
Update:
Finally I was able to enter in FASTBOOT & RESCUE MODE following this procedure:
1-Turn off the phone
2-Connect USB cable to computer but NOT to the phone
3-Press the volume down button and hold It
4-Connect the USB cable to the phone
5-Ready, the phone will turn on automatically in this mode (DO NOT press the power button)
So, now I have fastboot but I CANNOT flash the f.....ing HIFI partition
I tried:
-fastboot flash hifi hifi.img --> command not allowed
-fastboot flash radio hifi.img --> command not allowed
-fastboot flashing unlock --> command not allowed
-I tried to enter recovery mode. I have TWRP installed, I can also flash It again with fastboot, everything good but can't access It after that!!!!
-ADB is not working
-I flash a B052 ROM, then put B132 Update.app file in SD Card root\dload and try to force update by pressing volume up + volume down + power, nothing
-I flash the B132 ROM again , then put B170 Update.zip file in SD Card root\dload and try to force update by pressing volume up + volume down + power, nothing
-I try fastboot update update.zip but It says no android-info.txt nor android-product.txt
-I try to create a flashable .zip file for fastboot but It requires .sig files for the boot, recovery and system partitions
-HiSuite open ups automatically on the computer but can't connect to phone, the phone is not recognize by HiSuite but in windows says Marshall London Bootloader Interface. I can change that to Huwaei HDB Interface, Android ADB Interface, etc. etc. in device manager. A couple of times in the phone screen refreshes saying "Rescue mode enter.." but no way, HiSuite can't connect.
I tried lastest HiSuite version v2.3.55.1 and v1.8.2.206, nothing.
So, I have fastboot, what else can I do? Can somebody help me build a .zip file flashable with fastboot?
Is there any other fastboot or tool (I tried mfastboot too) that may allow me to flash HIFI partition?
With the phone like this, which USB device shows up? (HardwareID)
Try to put phone in manual download mode.
Alferboy said:
With the phone like this, which USB device shows up? (HardwareID)
Try to put phone in manual download mode.
Click to expand...
Click to collapse
Trying to do that I get FASTBOOT & RESCUE MODE but I can't do anything. How I may enter to download mode?
loredata said:
Trying to do that I get FASTBOOT & RESCUE MODE but I can't do anything. How I may enter to download mode?
Click to expand...
Click to collapse
Fastboot should be enough.
Alferboy said:
Fastboot should be enough.
Click to expand...
Click to collapse
No way, can't flash HIFI partition.
Device is detected as Android Sooner Single ADB Interface.
I tried:
fastboot flash HIFI HIFI.img
fastboot flash hifi HIFI.img
fastboot flash HIFI hifi.img
Always the same error: FAILED <remote: command not allowed>
1.Download b052 unzip/unRAR it
2.Extract from unzipped update.app through huawei update extractor :
boot, cust, recovery, system, userdata
to the folder where u have adb
3.Start cmd in that ADB folder
4.Flash via fastboot those 5 img files
5.After flashing those files use command fastboot reboot
6. Boot phone
7. Update to latest ROM version via ota
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
I have the same problem and it doesnt work... Some many line is failed in the command...
iznogoud69 said:
I have the same problem and it doesnt work... Some many line is failed in the command...
Click to expand...
Click to collapse
Try these commands:
chdir C:\adb
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
PD: What the f**ck is HIFI?
Had the same problem and solved it. What I did:
1) Disconnect and power off.
2) Put a stock rom (UPDATE.APP) on SD card in folder dload and put it in the phone.
3) Connect as described above to enter FASTBOOT & RESCUE MODE
4) fastboot flash cust cust.img
5) fastboot flash recovery recovery.img
6) fastboot flash boot boot.img
7) Disconnect and power off.
8) Hold down Volume+ AND Volume- AND Power until the phone enters EMUI system update mode and stars update from the SD card.
After a few minutes: Up and running.
I cant fix my phone
Geladk said:
Had the same problem and solved it. What I did:
1) Disconnect and power off.
2) Put a stock rom (UPDATE.APP) on SD card in folder dload and put it in the phone.
3) Connect as described above to enter FASTBOOT & RESCUE MODE
4) fastboot flash cust cust.img
5) fastboot flash recovery recovery.img
6) fastboot flash boot boot.img
7) Disconnect and power off.
8) Hold down Volume+ AND Volume- AND Power until the phone enters EMUI system update mode and stars update from the SD card.
After a few minutes: Up and running.
Click to expand...
Click to collapse
I follow your steps and i cant fix my phone, at the moment of enter in EMUI system update with de 3 keys, It can't update... I only see the screen of Rescue mode
loredata said:
Hi all!!!
I'm screwed!! :crying::crying::crying:
I think I bricked the phone!
Please help!!
Click to expand...
Click to collapse
Did you solved the problem?
Geladk said:
Had the same problem and solved it. What I did:
1) Disconnect and power off.
2) Put a stock rom (UPDATE.APP) on SD card in folder dload and put it in the phone.
3) Connect as described above to enter FASTBOOT & RESCUE MODE
4) fastboot flash cust cust.img
5) fastboot flash recovery recovery.img
6) fastboot flash boot boot.img
7) Disconnect and power off.
8) Hold down Volume+ AND Volume- AND Power until the phone enters EMUI system update mode and stars update from the SD card.
After a few minutes: Up and running.
Click to expand...
Click to collapse
I have the exactly same problem.
I got 'remote: Command not allowed' when I flash the 3 .img files.
But it says that PHONE unlocked.
Could you let me know how to fix it?
sbihero said:
I have the exactly same problem.
I got 'remote: Command not allowed' when I flash the 3 .img files.
But it says that PHONE unlocked.
Could you let me know how to fix it?
Click to expand...
Click to collapse
You can try this method via HiSuite
greatslon said:
You can try this method via HiSuite
Click to expand...
Click to collapse
seriously? chinese?
I HAVE THE SAME PROBLEM AND ICAN NOT SOLVE IT
IHAVE ROOTED MY PHONE BEFORE THAT IS THE guarantee IS STEEL WORKING ?
guarantee
Use this tutorial is in spanish but it worked for me
http://www.htcmania.com/showthread.php?t=1112055
Need to have unlocked bootloader.
Put your phone in fastboot mode.
Use the unziped file you just downloaded.
Run it, it does all for you, instructions are in spanish, but you can figure it out.
Regards
Unlock bootloader
HUSSENISAM said:
I HAVE THE SAME PROBLEM AND ICAN NOT SOLVE IT
IHAVE ROOTED MY PHONE BEFORE THAT IS THE guarantee IS STEEL WORKING ?
guarantee
Click to expand...
Click to collapse
rubentkato77 said:
Use this tutorial is in spanish but it worked for me
http://www.htcmania.com/showthread.php?t=1112055
Need to have unlocked bootloader.
Put your phone in fastboot mode.
Use the unziped file you just downloaded.
Run it, it does all for you, instructions are in spanish, but you can figure it out.
Regards
Click to expand...
Click to collapse
Hi,
Do as rubentkato77 told, unlock bootloader eve if it tells you that is already unlocked. Be sure you have it unlocked by you, then follow the procedure as rubentkato77 told you. It is working like a charm. I have done this already for quiet some time.
Cheers.
My Huawei P8 GRA-UL00 Stuck in RESCUE MODE screen, please HELP ME!!
CristiMCI said:
Hi,
Do as rubentkato77 told, unlock bootloader eve if it tells you that is already unlocked. Be sure you have it unlocked by you, then follow the procedure as rubentkato77 told you. It is working like a charm. I have done this already for quiet some time.
Cheers.
Click to expand...
Click to collapse
awais awais said:
Click to expand...
Click to collapse
awais awais said:
Click to expand...
Click to collapse
First and foremost, this is P8 Lite section of the forum.
Did you followed unlocking bootloader procedure for P8? Be sure you have unlocked bootloader, otherwise do it again and retry to flash those 4 files extracted with "Huawei Update Extractor" from FULL APP ROM image specific for your P8 GRA-UL00.
BTW, I have used Fedora Linux v23 to make all the Android moves, never Windows because it fails big time. +1 for Linux :good:
Sorry mate, I don't own a P8, but a P8 Lite. Cheers.
I have the same error How can i fix it?
Have rooted my phone, unlocked.
Had all updates up to B140. Wanted to update to B170. Managed to do that by flashing all the image files from B121 and then did update on all zipfiles up to B170
So far so good.
But guess what...no recovery any more!!!!!
Started to reflash all the files one by one from original B100 files. Just from basic i thought.
Now the phone wont start and gets into bootloop.
Doesn´t matter if i reflash userdata.img, boot.img, system.img....and recovery.img.
even if i put update.app (from B100 whole image) into a microsd and start up the phone...it will not enter recovery mode at all. EVEN if it sais OK when flashing using command.
fastboot flash recovery recovery.img
is sais OK. But the phone just bootloops.
The only thing that works now is entering fastboot & rescue mode. (bootloader)
I have NO idea at all what to do now. Have even tried honor 7 multi tool....chosed unbrick....putted in all the desired files under files/unbrick (boot, cust, system,recovery), Everything sais ok after flashing.
But phone will not enter recovery mode at all?
this is starting to annoying me...
PLEASE....help....
crowhater said:
Have rooted my phone, unlocked.
Had all updates up to B140. Wanted to update to B170. Managed to do that by flashing all the image files from B121 and then did update on all zipfiles up to B170
So far so good.
But guess what...no recovery any more!!!!!
Started to reflash all the files one by one from original B100 files. Just from basic i thought.
Now the phone wont start and gets into bootloop.
Doesn´t matter if i reflash userdata.img, boot.img, system.img....and recovery.img.
even if i put update.app (from B100 whole image) into a microsd and start up the phone...it will not enter recovery mode at all. EVEN if it sais OK when flashing using command.
fastboot flash recovery recovery.img
is sais OK. But the phone just bootloops.
The only thing that works now is entering fastboot & rescue mode. (bootloader)
I have NO idea at all what to do now. Have even tried honor 7 multi tool....chosed unbrick....putted in all the desired files under files/unbrick (boot, cust, system,recovery), Everything sais ok after flashing.
But phone will not enter recovery mode at all?
this is starting to annoying me...
PLEASE....help....
Click to expand...
Click to collapse
You need to put the full rom of either B100 or B121 or B130 on your SD card in the dload folder then boot into updater mode.(it's either volume up or both volume up and down) make sure you do not have a USB plugged in or you will get an error!
Basically if you can boot into fastboot mode then there is always a way!
I may have forgotten a step but check the forums and look for the rooting guide. In there you will find my tale of misery and how to fix it!
hmmm
Thanx mate....appreciate your help...
. I followed your instructions. Had forgotten not to have the usb cable inserted.
Got into bootloader again and it said... error recovery ...think it was #11...and then #2 (errors)
Tried to flash recovery again...success...as it said OK. stock recovery that is.
Now back into boot lock...restarts all the time.
Inserted whole image..3Gig file.. .update.app (note...update.app....not update.zip) into micro sd card in folder dload
Tried to restart the phone ...volume up...+ down...+ power (no usb connected)
But it wont enter to the mode where the update is beeing processed at all. ...just looping the boot....restarts the phone after 8seconds after honor logo appears.
Very strange........
So after the cable is plugged out...i can not enter neither fastboot...nor recovery. Need to insert the USB to be able to enter fastboot mode again.
Seems that something strange happens with recovery part..?? EVEN if is sais ok during flash...something happens...
can one force the update to start via fastboot? or something else?
try to connect it to HiHuawei suite at first! Sometimes it help to break the bootloop.
If you have used the B170 update file, the recovery has changed! Now you need to install B300 MM rollback file at first.
The update procedure with B300 rollback breaks at nearly 98% but it doesn’t mater! You will get into status B300.
Then you can flash B121 full (dload). hope this should help.
BTW: there are quiet more partitions active as you think!! I think, you will have mixed conditions now.
The own way to correct it is to flash a full backup now!
DON’T FORGET TO FULLY UN ROOT AT FIRST!! NOT ONLY UN INSTALL; FULL REMOVE OF SuperSU!
crowhater said:
Thanx mate....appreciate your help...
Seems that something strange happens with recovery part..?? EVEN if is sais ok during flash...something happens...
can one force the update to start via fastboot? or something else?
Click to expand...
Click to collapse
To get out of bootloop and turn off the phone, go to eRecovery. Press volume up and connect to PC. HOLD until phone drop into it. There you will be able to power off the phone. Next three buttons switch the flashing process
erecovery???
inside!out said:
To get out of bootloop and turn off the phone, go to eRecovery. Press volume up and connect to PC. HOLD until phone drop into it. There you will be able to power off the phone. Next three buttons switch the flashing process
Click to expand...
Click to collapse
Well..the problem is that i can not enter anything else except for bootloader (fastboot)
Tried to press volume up... + pwr. holding for 10 seconds. Nothing.
same without usb...nothing.
Tried with volume down.....+pwr. .without usb.... nothing....
both up & down....with...without usb....nothing.
*******
Only that works is USB cable ...volume down and pwr.
When in fastboot. Computer sound is heard and HiSuite is started...but no connection at all....
I have as i said a whole imagefile in sd card. Both in root of sdcard (update.app). and inside dload folder (update.app)...but it wont boot to start install process at all.
I went from B170 to B100...and after that it did not work.
The reason...was "only" because recovery was lost when i had B170...just wanted to redo everything..no nothing works.
sight...
can not enter erecovery at all......
crowhater said:
Well..the problem is that i can not enter anything else except for bootloader (fastboot)
Tried to press volume up... + pwr. holding for 10 seconds. Nothing.
same without usb...nothing.
Tried with volume down.....+pwr. .without usb.... nothing....
both up & down....with...without usb....nothing.
can not enter erecovery at all......
Click to expand...
Click to collapse
Did I wrote anything about the power button???
I said hold the volume up and pluci cable to the PC, and hold it until you get to eRecovery.
inside!out said:
Did I wrote anything about the power button???
I said hold the volume up and pluci cable to the PC, and hold it until you get to eRecovery.
Click to expand...
Click to collapse
Sorry...forgot to write that i also tested that. Held the volume up button for 60 seconds and it rebooted 4 times during that time.
tested to plug in cable both when seeing the logo...and also directly after the logo disappears...but no success...
inside!out said:
Did I wrote anything about the power button???
I said hold the volume up and pluci cable to the PC, and hold it until you get to eRecovery.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have debranded phone. My eRecovery in chinese. You need last item this menu.
Sent from my HONOR 7 via TapaTalk
---------- Post added at 16:04 ---------- Previous post was at 16:00 ----------
crowhater said:
Sorry...forgot to write that i also tested that. Held the volume up button for 60 seconds and it rebooted 4 times during that time.
tested to plug in cable both when seeing the logo...and also directly after the logo disappears...but no success...
Click to expand...
Click to collapse
try it after vibro
inside!out said:
I have debranded phone. My eRecovery in chinese. You need last item this menu.
Sent from my HONOR 7 via TapaTalk
---------- Post added at 16:04 ---------- Previous post was at 16:00 ----------
try it after vibro
Click to expand...
Click to collapse
inside!out..
yes i know....i have had this erecovery before....i was able to get into this menu before. But i can not enter it now. It is gone. I can not reflash TWRP aswell...neither stock recovery. EVEN if it sais success...OK....it still loops around the boot.
Thanks for your patience and help though....
WOW.......i bit on my way...
JUst maneged to flash the B170 img files....all of them.... extracted everything from B170 update using extractor...and run all of them ...using fastboot (some of the img were not able to load. just userdata...boot..cache....and recovery)
And now it restarts.... JIHAAAAAA....
...but i do not have any recovery at all.....the phone starts...but no recovery possibility at all.
Tried to shut down.......ok.
Phone totally off. presses volume up....inserted usb cable...after a while it booted up...but still after 8 seconds it reboots without entering any recovery at all.
But now the phone starts without reboot loop.
Okay..that means that we are back on track....with the first problem. I can not reboot into a recovery mode.....neither using TWRP...or stock recovery....
hmmmm
Hmm...okay ...
Just did all the updates until B170.
The TWRP_Honor7_EN.img seems to be the problem. I have now erecovery...the stock recovery. But when flashing using fastboot flash recovery TWRP_Honor7_EN.img and then try to enter the recovery...it fails.
sooo..... is there some new TWRP that works for B170?
Added---
Here is the problem.....one needs to use this one..
http://forum.xda-developers.com/honor-7/development/recovery-twrp-2-8-7-0-hwplk-plk-l01-t3290306
SOLVED...!!!!!!!!!!!!
crowhater said:
Hmm...okay ...
Just did all the updates until B170.
The TWRP_Honor7_EN.img seems to be the problem. I have now erecovery...the stock recovery. But when flashing using fastboot flash recovery TWRP_Honor7_EN.img and then try to enter the recovery...it fails.
sooo..... is there some new TWRP that works for B170?
Added---
Here is the problem.....one needs to use this one..
http://forum.xda-developers.com/honor-7/development/recovery-twrp-2-8-7-0-hwplk-plk-l01-t3290306
SOLVED...!!!!!!!!!!!!
Click to expand...
Click to collapse
in my honor 7 multi-tool used this TWRP for Android 6.0 and B170/B190.
i had flashed a recovery with the RASHR app and was fallen into a bootlopp!
I have taken HUAWEI EXTRACTOR and extract all files from B121 to a folder on my pc.
Than i flashed Boot.img; cust.img; recovery.img; recovery2.img; Cache.img: Data.img
IF YOU GET A ERROR DURING FLASHING A FILE, PLEASE RESTART DEVICE INTO FASTBOOT AGAIN AND CONTINUE WITH THE NEXT FOLLOWING IMAGE!
after next reboot, i was able to start my system! I had make a rollback to B300 (B313 to interim) and than flashed the B121 followed from B170. This solved my problem. Maybe it can help you too.
SOLVED!
Hi all i just bricked my phone : P9-lite VNS-L31
I managed to unlock bootloader, install twrp and get root permission. Phone worked great. Then i tried to flash xposed and the operation fails due to not enough memory space (!! i have 6gb) and get stuck in bootloop. I made all the possible things i knowed. Tried to use xposed-unistaller.zip (getting other errors like: "no such file o direcory") , wipe cache,dalvik and data and i try also to reflash stock recovery, and to relock bootloader (i can't do that.. why? i get FAILED <remote: command not allowed>) because erecovery and HiSuite can't restore my phone. What can i do?? It's a simple bootloop but i cant restore it. Please help me i have just bought the phone and now i'm very desperate.
I really hope some can help,
Thank you
Can you flash the stock rom through SD card?
Copy the stock rom file to this path: sd card\dload\UPDATE.APP,
Then, presss Volume + , Volume -, and the power keys to force upgrade your phone.
Hi, i solved my problem flashing system.img extracted by an official firmware. Everything ok. If someone need it i can write a little guide now to restore bricked p9-lite with custom recovery and unlocked bootloader (the normal procedure does not work)
Zeph1990 said:
Hi, i solved my problem flashing system.img extracted by an official firmware. Everything ok. If someone need it i can write a little guide now to restore bricked p9-lite with custom recovery and unlocked bootloader (the normal procedure does not work)
Click to expand...
Click to collapse
would you be so kind pls , and could you do the guide for me ? i somehow managed to ruin my phone , i can enter recovery , i can enter erecovery (wont download anything)
but what ever i tried didnt work :/ im getting kinda tilted , cus im trying to solve it for like 7hrs .. and im starting to be alot upset about it .. its like first time i cant repair it my self .. it hurts man (
so thanks for any help
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Zeph1990 said:
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Click to expand...
Click to collapse
with pressing volume - and power i enter into erecovery from there i should use fastboot to flash system.img ? sorry for being dum
edit: when in erecovery (volume- and power) typing fastboot flash system with full path , does nothing .. only saying waiting for device
edit2: no matter what i do , i cant fastboot flash system .. waiting for device .. only thing i can do is enter TWRP (also got root) , enter Erecovery and thats it .. phone only boots to huawei animation along wiht sound and thats it .. i tried adb sideload from TWRP but no help also .. guess there is nothing i can do right ?
Edit3: so i booted via TWRP to bootloader , used that fastboot command , flashed system , wiped cache , and now it is looking that phone is booting up !
thanks bro , any way i can pay you back ? cus you da MVP here !
EDIT4: well phone booted , rebooted , and now i cant enter recovery it boots into erecovery and i cant do nothing else
EDIT5: got into fastboot menu in phone , it says update system again , Error Func NO : 10 (boot image) Error NO : 2 (load failed)
EDIT6: somehow made it into fastboot , somehow flashed recovery , managed to restore my phone from back up , but sadly enough i cant restore it via google , since when i try to log in it says waiting .. dam this phone . i had galaxy S .. got this huawei just for pokemon go (which is pretty ****ty without gyro) FML right
EDIT7: lost most of my hairs .. some of them were ripped out in some anger explosions .. chewed of some of my nails .. but somehow i made it ! now if i only could unroot and relock bootloader xD think im gonna take a break for now and when my nerves will calm down i may try it again . Rly wanna thank you from all of my heart for help , thanks !! your the best man , thanks again
Sorry, can you normally boot and use your phone now?
Edit: It seems you can boot. Now you have restored your twrp recovery. I don't know why you have problems with google log in, but hey now it boots!
Zeph1990 said:
Sorry, can you normally boot and use your phone now?
Edit: It seems you can boot. Now you have restored your twrp recovery. I don't know why you have problems with google log in, but hey now it boots!
Click to expand...
Click to collapse
i cant thank you enough , without you i couldnt achieve this so thanks again !!
finaly did everything .. and only thing left is get bootloader locked and unroot it hope i will somehow find the way
So happy to hear it! =)
I tried also to relock bootloader during my attempts to unbrick the phone but i fail.. i don't know why, but i think someone was able to do it.
Zeph1990 said:
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Hope this can help.
Click to expand...
Click to collapse
Where did you launch the command? I can't do it in the huawei update extractor... Please help!!
Thank you.
ElPinguShow said:
Where did you launch the command? I can't do it in the huawei update extractor... Please help!!
Thank you.
Click to expand...
Click to collapse
Hi, if you don't know what is fastboot maybe you can approach it the easy way.
Download and install this for the correct drivers : http://consumer.huawei.com/minisite/HiSuite_en/index.html
Download and extract to a folder this : https://mega.nz/#!B4tATA5D!-TseQ9A-TPEQhzNQRXsT_cV2i4T7qYYLadceW0fM8k0
Put your phone in fastboot mode : Turn it off. Connect it to your pc . Long press vol - and power until it boots in fastboot mode (white screen with a green android and other stuff). If you want you can boot in fastboot from TWRP recovery : restart -> bootloader.
Copy your extracted SYSTEM.IMG in the root path of the tool (we can assume its name is system.img).
Now launch the tool and press 000 and enter.
If you have done all right now you can give this : fastboot flash system system.img
Wait about 3 minutes. Perform a cache and dalvik cache wipe. Boot your phone.
Zeph1990 said:
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Click to expand...
Click to collapse
Hi,
I am using the standard P9, and getting the Boot Loop also.
I attempted your instructions, and appeared to work - I got the first EMUI initialization screen - and now its gone back to how it was.
Any suggestions?
I think it should work on every phone assuming you are using the right firmware. Do you use the right firmware for the huawei P9 ?? (needless to say it's not the version i posted)).
So if you flashed the right firmware (and i'm pretty sure of this) my advice is to perform a full wipe : Cache, dalvik and data.
If you are still facing the same error consider flashing other frimware parts like boot.img ecc.
I believe so - I am pretty clueless with this stuff.
By firmware, do you mean the stock version? Because I used P9-EVAL09-EVA-B136. Don't suppose you would know the right firmware I require?
I think it's the right version. I am a p9lite user so i don't know specifically the right version of the firmware but i think it's ok. Do you tried a full wipe?
Zeph1990 said:
I think it's the right version. I am a p9lite user so i don't know specifically the right version of the firmware but i think it's ok. Do you tried a full wipe?
Click to expand...
Click to collapse
How can I perform a full wipe? Thanks for replying by the way
So, do you have unlocked bootloader and custom recovery (TWRP) ?
Zeph1990 said:
So, do you have unlocked bootloader and custom recovery (TWRP) ?
Click to expand...
Click to collapse
I do yes
So, go in twrp recovery (turn off phone, long press vol up and power for at least 3 seconds). When you are in you will see 'WIPE' press it then do the swipe to Factory Reset. You will lost your installed apps and the relative settings but you will not lost your personal stuff such photo,music documents ecc. Let me know if you perform it and if it works =)
It appears that TWRP no longer appears. I get thr EMUI options to wipe data/factory reset. But once I do this I just get a red exclamation mark.
Does the phone need to be plugged in via USB?
Hi, I need help with my P9 Lite (VNS-L21)
-Rooted
-Official MM
Beginning...
I'm trying to update the phone to 7.0 this thread.
http://forum.xda-developers.com/hua...t/android-7-emui-5-0-vns-l31-l21-l23-t3513816
Downloading a finite time for the installation.
1. I turn TWRP
2. Install
3. update.zip
4. 1%
5. The phone is switched off
Now do not respond to the Recovery / eRecovery / Download
The lack of any sign of life.
If anyone had a similar case or has already been solved and have not found it sorry and please reply to this topic, I care about the time and not on the specifics links to sites such .. "how to". Specifics, please, thank you in advance!
Does ADB fastboot work?
I have the same problem, my phone goes only on "download mode " (Power button, vol+ and vol -). If i connect it to PC, i can hear the sound when a usb device is connected
Try this... Extract the sdcard...
Put it into another phone...in the sd card...create a folder and call it"dload"...in that folder put the UPPDATE.app file from the last Marshmallow update.
Extract the sd card from that another phone and put it into the P9 Lite. Shutdown the phone...and then press volume +,volume - and power at the same time till start. Let me know if that work later...
Hi, after almost 6h war with my phone. I got connection to fastboot. Soo i downloaded stock MM B120 (for me) . Extract with HuaweiFrimawareExtractor;
Unpack:
-boot.img
-recovery.img
-system.img
1. fastboot erase cache // FAILED
2. fastboot flash [boot boot.img / recovery recovery.img / system system.img] // OK
3. fastboot reboot || fastboot reboot-bootloader
NOTTHING,... Stil blackscreen, no vibration, notification led...
l3mpik said:
Hi, after almost 6h war with my phone. I got connection to fastboot. Soo i downloaded stock MM B120 (for me) . Extract with HuaweiFrimawareExtractor;
Unpack:
-boot.img
-recovery.img
-system.img
1. fastboot erase cache // FAILED
2. fastboot flash [boot boot.img / recovery recovery.img / system system.img] // OK
3. fastboot reboot || fastboot reboot-bootloader
NOTTHING,... Stil blackscreen, no vibration, notification led...
Click to expand...
Click to collapse
Unpack cust.img and flash boot,recovery,cust and system.img
andrexp31 said:
Try this... Extract the sdcard...
Put it into another phone...in the sd card...create a folder and call it"dload"...in that folder put the UPPDATE.app file from the last Marshmallow update.
Extract the sd card from that another phone and put it into the P9 Lite. Shutdown the phone...and then press volume +,volume - and power at the same time till start. Let me know if that work later...
Click to expand...
Click to collapse
I tried , but phone says isn't correct package
l3mpik said:
Hi, after almost 6h war with my phone. I got connection to fastboot. Soo i downloaded stock MM B120 (for me) . Extract with HuaweiFrimawareExtractor;
Unpack:
-boot.img
-recovery.img
-system.img
1. fastboot erase cache // FAILED
2. fastboot flash [boot boot.img / recovery recovery.img / system system.img] // OK
3. fastboot reboot || fastboot reboot-bootloader
NOTTHING,... Stil blackscreen, no vibration, notification led...
Click to expand...
Click to collapse
How did you get into fastboot?
Hello have you tried with tookit 0.0.007 , Unlock bootloader, is flash recovery TWRP or dual flash sim + b130 full
When i connect my phone to PC. I got notification about installing drivers for "FastBoot2.0";
fastboot devices // return S/N of my phone
"Hello have you tried with tookit 0.0.007 , Unlock bootloader, is flash recovery TWRP or dual flash sim + b130 full" No. Give me 15min for feedback
Still can't boot up phone. I remember when my Phone turn off. When flashing radio... Where can i get this file ?
l3mpik said:
Still can't boot up phone. I remember when my Phone turn off. When flashing radio... Where can i get this file ?
Click to expand...
Click to collapse
I had the same thing with mine, only way of getting it back to life is with the dc phoenix. 15 euro later and the phone was back to erecovery screen in about 3 minutes.
https://www.dc-unlocker.com/file-list/DC-unlocker_softwares/DC_Phoenix
Cheers
Paul
Hi, my problem is with the L31,
I've trying to downgrade from Nougat to MM. I saw on the thread this steps and i followed:
"Fastboot flash boot boot.img
Fastboot flash system system.img
Fastboot flash cust cust.img (This one is in the second zip from badwolf nougat download)
Then I flashed badwolfs recovery b2 as that one lets me transfer files from pc to phone and followed instructions from htcmania from here".
The problem is that i didn't reach to downgrade and when i try to reinstall Nougat by TWRP i get this error messages:
" E: Unknow comand (errno) update_huawei-pkg_from_ota_zip: update package from zip failed"
"Updater process ended with error: 7
Error installing zip file '/external_sd/DLoad/Update.zip'
Updating partition details...
...done"
Now my phone stays freeze on the huawei logo and the flashtool doesn't even recognize my device.
Can someone help me with this matter, please?
Thanks
Hello,
my problem started trying to flash Elite-ROM. I got in a bootloop but I could get out by restoring the data from the backup I made in TWRP.
After getting back to my ROM, many functions didn't work on the phone like calling, camera and many apps, and the NFC sign keeps blinking on the status bar, even that it's not on.
Then I tried to flash the original firmware but I couldn't find it so trying to be a smartass I found out that changing the OEM info to the available firmwares could help
I tried that and now my phone is "bricked" if I'm right about the naming.
here are the only 2 things I can get. one by default and the other when restarting the phone holding the Volume down button.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is really interesting that Huawei multi-tool by team MT detects my phone...
But it says that my bootloader is locked and when I try to unlock it it says that there is a problem with the USB conncection
PS: I tried to boot into recovery but it just won't.. :crying:
My phone is WAS-LX1A (middle east) and was running EMUI 5.1, build number was: WAS-LX1Ac18
Is there any way to fix my phone?
update: after poking around in the multi tool by MT, I could unlock my bootloader, now I have access to TWRP and the corrupt backup that I have
Update 2: now I just trying to download different firmwares and will try to flash them, I restored the stock recovery to be able to install the firmware via the volume and power buttons on startup...
I can't find a service rom for your region!
In theory you can re-brand it to C432 (Europe) and you can flash original service rom.
Steps:
1. Install TWRP
2. Download OEMinfo for Dual SIM WAS-LX1AC432 - https://drive.google.com/file/d/0B-k_1rnfFeEvdWxZZE1tNWwwOHM/view
3. Extract the 3 files into folder called "DUAL-SIM-OEMINFO-C432"
4. Put the folder "DUAL-SIM-OEMINFO-C432" into "SDCARD\TWRP\BACKUPS\YOUR_PHONE_SERIAL_NUMBER"
5. Must be: "SDCARD\TWRP\BACKUPS\YOUR_PHONE_SERIAL_NUMBER\DUAL-SIM-OEMINFO-C432"
6. Download ROM Warsaw-L21_C432 - http://androidhost.ru/JT
7. In the root directory of your SD Card create a folder "dload"
8. Put the file UPDATE.APP and folder WAS-L21A_hw_eu (contains the file update_WAS-L21A_hw_eu.app) inside your dload folder
9. Must be: "SDCARD\dload\UPDATE.APP" and "SDCARD\dload\WAS-L21A_hw_eu\update_WAS-L21A_hw_eu.app"
10. Reboot into TWRP, create a backup of your original OEMinfo
11. Restore TWRP backup: Go to TWRP -> Restore and select a folder "DUAL-SIM-OEMINFO-C432" then restore the OEMinfo partition.
12. Go to TWRP -> Reboot -> Turn OFF you phone
13. Once the phone is turned off hold all 3 buttons volume up, volume down, power until you see EMUI update menu
14. An automated system update process will begin
15. After successful install your phone will have Dual Sim and STOCK WAS-LX1AC432B182
Thanks a lot, I'll try it later today.
Aalesund said:
12. Go to TWRP -> Reboot -> Turn OFF you phone
13. Once the phone is turned off hold all 3 buttons volume up, volume down, power until you see EMUI update menu
14. An automated system update process will begin
15. After successful install your phone will have Dual Sim and STOCK WAS-LX1AC432B182
Click to expand...
Click to collapse
I got to step 13 then I got the error screen with Error Func NO 11 (recovery image) and Error NO 2 (load failed)
Aalesund said:
12. Go to TWRP -> Reboot -> Turn OFF you phone
13. Once the phone is turned off hold all 3 buttons volume up, volume down, power until you see EMUI update menu
14. An automated system update process will begin
15. After successful install your phone will have Dual Sim and STOCK WAS-LX1AC432B182
Click to expand...
Click to collapse
So after getting stuck there, I decided to restore the stock recovery because, with TWRP on my device, I boot to TWRP recovery whenever I press the + and - volume buttons with the power button at the same time.
After getting the stock recovery the installing process started but it was stuck at 5% until it restarted and got a boot loop for like 4 times. Then It did a system reset on boot, after which I got back to the corrupt ROM...
Maybe I'll try the same thing with different ROMs and their OEMs, do you have other ideas?
@Aalesund
Thank you bro !! you saved me, I've been suffering for 2 days with this till now.
After the reset, I just turned off the phone and tried again, it just worked
the past 2 days were really long and full of suffer, thanks to you I have my phone back.
mohammad409k said:
@Aalesund
Thank you bro !! you saved me, I've been suffering for 2 days with this till now.
After the reset, I just turned off the phone and tried again, it just worked
the past 2 days were really long and full of suffer, thanks to you I have my phone back.
Click to expand...
Click to collapse
Now you have working WAS-LX1A European region C432, right? If everything is successful your phone will no longer be Middle East region. Will be European region but it doesn't matter
The phone info should be WAS-LX1A with firmware WAS-LX1AC432B182.
BTW, I was going to show you another Unbick method via Huawei Multi Tool.
Download if you need in future ;p
https://mega.nz/#!yB5wzb6R!L_hzd6XtfN4GHP8NxWvZRiuBgoX5Tlq4vBpC8XX9qNs (use Google Chrome)
How to use:
1. Install adb-setup-1.4.3
2. Install Multi-Tool 8
3. Turn OFF the phone
4. Press and Hold Vol- and connect phone to PC via USB cable
5. Open Device Manager and make sure the phone is shown as Android Bootloader Interface
6. Open Multi-Tool 8 and go to tab Unbrick
7. Press Specify folder and select the folder WAS-LX1AC432 and on the right side, you should see a message that all files are available
8. Press Unbrick button
Aalesund said:
Now you have working WAS-LX1A European region C432, right? If everything is successful your phone will no longer be Middle East region. Will be European region but it doesn't matter
The phone info should be WAS-LX1A with firmware WAS-LX1AC432B182.
BTW, I was going to show you another Unbick method via Huawei Multi Tool.
Download if you need in future ;p
https://mega.nz/#!yB5wzb6R!L_hzd6XtfN4GHP8NxWvZRiuBgoX5Tlq4vBpC8XX9qNs (use Google Chrome)
How to use:
1. Install adb-setup-1.4.3
2. Install Multi-Tool 8
3. Turn OFF the phone
4. Press and Hold Vol- and connect phone to PC via USB cable
5. Open Device Manager and make sure the phone is shown as Android Bootloader Interface
6. Open Multi-Tool 8 and go to tab Unbrick
7. Press Specify folder and select the folder WAS-LX1AC432 and on the right side, you should see a message that all files are available
8. Press Unbrick button
Click to expand...
Click to collapse
I tried doing that, but with the OEM version that I've downloaded, it couldn't find all the files for the unbrick..
Thanks a lot again, I'm saving the files and thinking about uploading them to my google drive to never lose them again and to never be afraid of poking around with my ROM
PS: changing my phone's region to EU makes it only less suspicious with my name :laugh:
Hi sir Aalesund
i have p10 lite that stuck on download recovery screen and i used ur mthod to unbrick with multitool but at the end get error and set is still in same condition plz have a look and help me to fix it
thx
Unbricking started. Your computer may freezes during the process.
flash boot "C:\Users\Documents\Multi-Tool\Unbrick\WAS-LX1AC432\boot.img"
The Boot image is flashing successfully
flash system "C:\Users\Documents\Multi-Tool\Unbrick\WAS-LX1AC432\system.img"
The System image is flashing successfully
flash cust "C:\Users\Documents\Multi-Tool\Unbrick\WAS-LX1AC432\cust.img"
The Cust image is flashing successfully
flash recovery "C:\Users\Documents\Multi-Tool\Unbrick\WAS-LX1AC432\recovery.img"
The Recovery image is flashing successfully
flash userdata "C:\Users\Documents\Multi-Tool\Unbrick\WAS-LX1AC432\userdata.img"
target reported max download size of 471859200 bytes
sending 'userdata' (24576 KB)...
OKAY [ 0.825s]
writing 'userdata'...
(bootloader) success to erase cryypt info in oeminfo
OKAY [ 0.340s]
finished. total time: 1.165s
Error#1
Completed
Something went wrong (((
---------- Post added at 02:48 AM ---------- Previous post was at 02:34 AM ----------
Hi Sir
i have huawei p10 lite that is stuck on download recovery screen and am unable to unbrick with multitool
here is error log
Unbricking started. Your computer may freezes during the process.
flash boot "D:\Huawei\P10 Lite\WAS-LX1AC432\WAS-LX1AC432\boot.img"
The Boot image is flashing successfully
flash system "D:\Huawei\P10 Lite\WAS-LX1AC432\WAS-LX1AC432\system.img"
The System image is flashing successfully
flash cust "D:\Huawei\P10 Lite\WAS-LX1AC432\WAS-LX1AC432\cust.img"
The Cust image is flashing successfully
flash recovery "D:\Huawei\P10 Lite\WAS-LX1AC432\WAS-LX1AC432\recovery.img"
The Recovery image is flashing successfully
flash userdata "D:\Huawei\P10 Lite\WAS-LX1AC432\WAS-LX1AC432\userdata.img"
target reported max download size of 471859200 bytes
sending 'userdata' (24576 KB)...
OKAY [ 0.827s]
writing 'userdata'...
(bootloader) success to erase cryypt info in oeminfo
OKAY [ 0.326s]
finished. total time: 1.153s
Error#1
Completed
Something went wrong (((
Aalesund said:
I can't find a service rom for your region!
In theory you can re-brand it to C432 (Europe) and you can flash original service rom.
Steps:
1. Install TWRP
2. Download OEMinfo for Dual SIM WAS-LX1AC432 - https://drive.google.com/file/d/0B-k_1rnfFeEvdWxZZE1tNWwwOHM/view
3. Extract the 3 files into folder called "DUAL-SIM-OEMINFO-C432"
4. Put the folder "DUAL-SIM-OEMINFO-C432" into "SDCARD\TWRP\BACKUPS\YOUR_PHONE_SERIAL_NUMBER"
5. Must be: "SDCARD\TWRP\BACKUPS\YOUR_PHONE_SERIAL_NUMBER\DUAL-SIM-OEMINFO-C432"
6. Download ROM Warsaw-L21_C432 - http://androidhost.ru/JT
7. In the root directory of your SD Card create a folder "dload"
8. Put the file UPDATE.APP and folder WAS-L21A_hw_eu (contains the file update_WAS-L21A_hw_eu.app) inside your dload folder
9. Must be: "SDCARD\dload\UPDATE.APP" and "SDCARD\dload\WAS-L21A_hw_eu\update_WAS-L21A_hw_eu.app"
10. Reboot into TWRP, create a backup of your original OEMinfo
11. Restore TWRP backup: Go to TWRP -> Restore and select a folder "DUAL-SIM-OEMINFO-C432" then restore the OEMinfo partition.
12. Go to TWRP -> Reboot -> Turn OFF you phone
13. Once the phone is turned off hold all 3 buttons volume up, volume down, power until you see EMUI update menu
14. An automated system update process will begin
15. After successful install your phone will have Dual Sim and STOCK WAS-LX1AC432B182
Click to expand...
Click to collapse
Pleaseeeeeeee, I have exactly the same problem, a method for the was-lx3c605 ???
Guys, sorry for not replying and telling what happened..
anyways, it worked then, after I changed to Europe but then the GPS signal was lost, until I got the app (GPS Status) and now whenever the signal is lost I just launch the app and wait a bit then it's perfect for few months.
now I have the build WAS-LX1A (C432), and everything is just perfect.
Thanks a lot for your help
Aalesund said:
I can't find a service rom for your region!
In theory you can re-brand it to C432 (Europe) and you can flash original service rom.
Steps:
1. Install TWRP
2. Download OEMinfo for Dual SIM WAS-LX1AC432 - https://drive.google.com/file/d/0B-k_1rnfFeEvdWxZZE1tNWwwOHM/view
3. Extract the 3 files into folder called "DUAL-SIM-OEMINFO-C432"
4. Put the folder "DUAL-SIM-OEMINFO-C432" into "SDCARD\TWRP\BACKUPS\YOUR_PHONE_SERIAL_NUMBER"
5. Must be: "SDCARD\TWRP\BACKUPS\YOUR_PHONE_SERIAL_NUMBER\DUAL-SIM-OEMINFO-C432"
6. Download ROM Warsaw-L21_C432 - http://androidhost.ru/JT
7. In the root directory of your SD Card create a folder "dload"
8. Put the file UPDATE.APP and folder WAS-L21A_hw_eu (contains the file update_WAS-L21A_hw_eu.app) inside your dload folder
9. Must be: "SDCARD\dload\UPDATE.APP" and "SDCARD\dload\WAS-L21A_hw_eu\update_WAS-L21A_hw_eu.app"
10. Reboot into TWRP, create a backup of your original OEMinfo
11. Restore TWRP backup: Go to TWRP -> Restore and select a folder "DUAL-SIM-OEMINFO-C432" then restore the OEMinfo partition.
12. Go to TWRP -> Reboot -> Turn OFF you phone
13. Once the phone is turned off hold all 3 buttons volume up, volume down, power until you see EMUI update menu
14. An automated system update process will begin
15. After successful install your phone will have Dual Sim and STOCK WAS-LX1AC432B182
Click to expand...
Click to collapse
Thanks a lot that fixed mine.