Database Users

Stuck in RESCUE MODE screen, please HELP ME!!

Hi all!!!
I'm screwed!! :crying::crying::crying:
I think I bricked the phone!
Please help!!
Backups files I already have
A-WRP is correctly installed and I made a full nandroid backup.
B-I have a full partitions backups made with Partitions Backup and Restore App (Root access required). I backup all the partitions, all of them in raw mode. All the files are *.img ready to flash with fastboot.
C-I have a full B132 ALE-L21 stock ROM that was working perfectly before.
The problem
1-adb is not recognizing the device
2-fastboot is not recognizing the device
3-I cannot enter TWRP
4-Huawei EMUI 3 buttons (volume up + volume down + on/off button) function doesn't start neither (I'm trying to force the update to B132 ROM)
5-The phone enters directly to Rescue Mode and says:
error! Func NO : 8 (hifi image) Error NO : 1 (Security verify faild!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So the phone is still working and I got this RESCUE MODE screen but I can't do anything when this screen is displayed.
Any idea? What can I try?
Please, I really need your help, anything you can imagine to try please, let me know!!!
Thanks in advance!!!
Update:
Finally I was able to enter in FASTBOOT & RESCUE MODE following this procedure:
1-Turn off the phone
2-Connect USB cable to computer but NOT to the phone
3-Press the volume down button and hold It
4-Connect the USB cable to the phone
5-Ready, the phone will turn on automatically in this mode (DO NOT press the power button)
So, now I have fastboot but I CANNOT flash the f.....ing HIFI partition
I tried:
-fastboot flash hifi hifi.img --> command not allowed
-fastboot flash radio hifi.img --> command not allowed
-fastboot flashing unlock --> command not allowed
-I tried to enter recovery mode. I have TWRP installed, I can also flash It again with fastboot, everything good but can't access It after that!!!!
-ADB is not working
-I flash a B052 ROM, then put B132 Update.app file in SD Card root\dload and try to force update by pressing volume up + volume down + power, nothing
-I flash the B132 ROM again , then put B170 Update.zip file in SD Card root\dload and try to force update by pressing volume up + volume down + power, nothing
-I try fastboot update update.zip but It says no android-info.txt nor android-product.txt
-I try to create a flashable .zip file for fastboot but It requires .sig files for the boot, recovery and system partitions
-HiSuite open ups automatically on the computer but can't connect to phone, the phone is not recognize by HiSuite but in windows says Marshall London Bootloader Interface. I can change that to Huwaei HDB Interface, Android ADB Interface, etc. etc. in device manager. A couple of times in the phone screen refreshes saying "Rescue mode enter.." but no way, HiSuite can't connect.
I tried lastest HiSuite version v2.3.55.1 and v1.8.2.206, nothing.
So, I have fastboot, what else can I do? Can somebody help me build a .zip file flashable with fastboot?
Is there any other fastboot or tool (I tried mfastboot too) that may allow me to flash HIFI partition?

With the phone like this, which USB device shows up? (HardwareID)
Try to put phone in manual download mode.

Alferboy said:
With the phone like this, which USB device shows up? (HardwareID)
Try to put phone in manual download mode.
Click to expand...
Click to collapse
Trying to do that I get FASTBOOT & RESCUE MODE but I can't do anything. How I may enter to download mode?

loredata said:
Trying to do that I get FASTBOOT & RESCUE MODE but I can't do anything. How I may enter to download mode?
Click to expand...
Click to collapse
Fastboot should be enough.

Alferboy said:
Fastboot should be enough.
Click to expand...
Click to collapse
No way, can't flash HIFI partition.
Device is detected as Android Sooner Single ADB Interface.
I tried:
fastboot flash HIFI HIFI.img
fastboot flash hifi HIFI.img
fastboot flash HIFI hifi.img
Always the same error: FAILED <remote: command not allowed>

1.Download b052 unzip/unRAR it
2.Extract from unzipped update.app through huawei update extractor :
boot, cust, recovery, system, userdata
to the folder where u have adb
3.Start cmd in that ADB folder
4.Flash via fastboot those 5 img files
5.After flashing those files use command fastboot reboot
6. Boot phone
7. Update to latest ROM version via ota
Wysłane z mojego ALE-L21 przy użyciu Tapatalka

I have the same problem and it doesnt work... Some many line is failed in the command...

iznogoud69 said:
I have the same problem and it doesnt work... Some many line is failed in the command...
Click to expand...
Click to collapse
Try these commands:
chdir C:\adb
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
PD: What the f**ck is HIFI?

Had the same problem and solved it. What I did:
1) Disconnect and power off.
2) Put a stock rom (UPDATE.APP) on SD card in folder dload and put it in the phone.
3) Connect as described above to enter FASTBOOT & RESCUE MODE
4) fastboot flash cust cust.img
5) fastboot flash recovery recovery.img
6) fastboot flash boot boot.img
7) Disconnect and power off.
8) Hold down Volume+ AND Volume- AND Power until the phone enters EMUI system update mode and stars update from the SD card.
After a few minutes: Up and running.

I cant fix my phone
Geladk said:
Had the same problem and solved it. What I did:
1) Disconnect and power off.
2) Put a stock rom (UPDATE.APP) on SD card in folder dload and put it in the phone.
3) Connect as described above to enter FASTBOOT & RESCUE MODE
4) fastboot flash cust cust.img
5) fastboot flash recovery recovery.img
6) fastboot flash boot boot.img
7) Disconnect and power off.
8) Hold down Volume+ AND Volume- AND Power until the phone enters EMUI system update mode and stars update from the SD card.
After a few minutes: Up and running.
Click to expand...
Click to collapse
I follow your steps and i cant fix my phone, at the moment of enter in EMUI system update with de 3 keys, It can't update... I only see the screen of Rescue mode

loredata said:
Hi all!!!
I'm screwed!! :crying::crying::crying:
I think I bricked the phone!
Please help!!
Click to expand...
Click to collapse
Did you solved the problem?

Geladk said:
Had the same problem and solved it. What I did:
1) Disconnect and power off.
2) Put a stock rom (UPDATE.APP) on SD card in folder dload and put it in the phone.
3) Connect as described above to enter FASTBOOT & RESCUE MODE
4) fastboot flash cust cust.img
5) fastboot flash recovery recovery.img
6) fastboot flash boot boot.img
7) Disconnect and power off.
8) Hold down Volume+ AND Volume- AND Power until the phone enters EMUI system update mode and stars update from the SD card.
After a few minutes: Up and running.
Click to expand...
Click to collapse
I have the exactly same problem.
I got 'remote: Command not allowed' when I flash the 3 .img files.
But it says that PHONE unlocked.
Could you let me know how to fix it?

sbihero said:
I have the exactly same problem.
I got 'remote: Command not allowed' when I flash the 3 .img files.
But it says that PHONE unlocked.
Could you let me know how to fix it?
Click to expand...
Click to collapse
You can try this method via HiSuite

greatslon said:
You can try this method via HiSuite
Click to expand...
Click to collapse
seriously? chinese?

I HAVE THE SAME PROBLEM AND ICAN NOT SOLVE IT
IHAVE ROOTED MY PHONE BEFORE THAT IS THE guarantee IS STEEL WORKING ?
guarantee

Use this tutorial is in spanish but it worked for me
http://www.htcmania.com/showthread.php?t=1112055
Need to have unlocked bootloader.
Put your phone in fastboot mode.
Use the unziped file you just downloaded.
Run it, it does all for you, instructions are in spanish, but you can figure it out.
Regards

Unlock bootloader
HUSSENISAM said:
I HAVE THE SAME PROBLEM AND ICAN NOT SOLVE IT
IHAVE ROOTED MY PHONE BEFORE THAT IS THE guarantee IS STEEL WORKING ?
guarantee
Click to expand...
Click to collapse
rubentkato77 said:
Use this tutorial is in spanish but it worked for me
http://www.htcmania.com/showthread.php?t=1112055
Need to have unlocked bootloader.
Put your phone in fastboot mode.
Use the unziped file you just downloaded.
Run it, it does all for you, instructions are in spanish, but you can figure it out.
Regards
Click to expand...
Click to collapse
Hi,
Do as rubentkato77 told, unlock bootloader eve if it tells you that is already unlocked. Be sure you have it unlocked by you, then follow the procedure as rubentkato77 told you. It is working like a charm. I have done this already for quiet some time.
Cheers.

My Huawei P8 GRA-UL00 Stuck in RESCUE MODE screen, please HELP ME!!
CristiMCI said:
Hi,
Do as rubentkato77 told, unlock bootloader eve if it tells you that is already unlocked. Be sure you have it unlocked by you, then follow the procedure as rubentkato77 told you. It is working like a charm. I have done this already for quiet some time.
Cheers.
Click to expand...
Click to collapse

awais awais said:
Click to expand...
Click to collapse
awais awais said:
Click to expand...
Click to collapse
First and foremost, this is P8 Lite section of the forum.
Did you followed unlocking bootloader procedure for P8? Be sure you have unlocked bootloader, otherwise do it again and retry to flash those 4 files extracted with "Huawei Update Extractor" from FULL APP ROM image specific for your P8 GRA-UL00.
BTW, I have used Fedora Linux v23 to make all the Android moves, never Windows because it fails big time. +1 for Linux :good:
Sorry mate, I don't own a P8, but a P8 Lite. Cheers.

I have the same error How can i fix it?

Fix bootloop in redmi note 3 (no recovery ,no edl mode)

After trying to flash the latest 7.1.1 cm 14 ropms many people ended up in bootloop where your phone switch on ,shows mi logo and rebbot again. Many where not able to enter recovey mode also.. Now i come up with a perfect soluton for you all on how to fix these issues in your phone..Lets Get started..
If anything goes wrong iam not responsible.Do it At your Own Risk.
Requirements
------------------
1. Enter edl .rar (attached below)
2.Miui Stock Rom (FastBoot). Download it from(only use this version) here
3.Phone Must have Charge of 50% or more.
4.Unlock Boot loader.zip (Attched Below)
6.MIPhone Tools and install it .Get it from here
6.Extract all the file
7. PDA Net.(Optional,but installing will be useful). Get it from here
Once you have all of the file we can move on
Steps
------
1. Put Your Phone into fastboot mode by pressing Vol Down and power button at same time.
2.Connect your Phone With Your PC
3.Run EDL Mode.exe from the zip Enter edl.. Now your phone must be in edl mode. You can see a light blinking at the top of your phone.
4. From the Unlock Boot Loader folder copy "emmc_appsboot.mbn" to the rom folder ie)
kenzo_global_images_V7.1.8.0.LHOMICL_20160129.0000.14_5.1_global--> images--> paste it there (replace/overwrite if existing)
5. Once the above step is done, Open MIFlash tool as administrator. Browse the folder
kenzo_global_images_V7.1.8.0.LHOMICL_20160129.0000.14_5.1_global and select it..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6.From the drop Down Menu Select Advanced.
7.Set Fastboot Script As Flash_ALL.Bat.
8.Set Flash Programmer As prog_emmc_firehose_8976_ddr.mbn from images folder.
9. Set RAW Xml File as rawprogram*.xml from images folder
10. Set Patch XML File as patch*.xml from images folder.
11. Video Help HERE.... Watch from 2.40 (Ignore the other portion,We dont need that Part)
Special [email protected] for the video.. I didn't made that video..
12. Once The Above step is done. Click REFRESH OPTION,and you will see Phone detected By The Name COMXX.(XX will be a number)
13.Click Flash and Wait for some time and allow the phone to reboot.
14.Once all the step is done your phone will be good to use..:fingers-crossed: :fingers-crossed:
UNLOCKING BOOT LOADER AND INSTALLING TWRP AGAIN
-------------------------------------------------------------------------
1.Once Your Phone Reboots successfully enable USB Debugginf From Developer Option.
2.Connect Your phone to your PC and Open CMD as administrator.
3.Type in "adb devices".
4. Cmd will show a random number and Device (Everyone will be knowing this,but for info only iam writing it here)
5.Type "adb reboot bootloader". Now your phone will boot into fastboot mode.
6.Type "fastboot oem device-info" to get device status.
7.Type "fastboot oem unlock-go" to unlock bootloader.
8.Again type "fastboot oem device-info" to check to find if device is unlocked.(Do not reboot YET)
9. Now Downlaod TWRP from HERE
10. Now Got to the folder containig TWRP . By holding the Shift Key Of key Board ,right click the mouse and select OPEN COMMAND WINDOW HERE.
11. Type "fastboot flash recovery recovery_filename.img"
12.Type "fastboot reboot".
You Phone will be good to go. If anything goes wrong or you have any doubt Comment Below do not pm me..i will not reply..
If this thread helpef you thumbs up and do comment and shre this post

So i do not need to unlock the boot loader before using MiTool to flash phone via EDL

ahh988 said:
So i do not need to unlock the boot loader before using MiTool to flash phone via EDL
Click to expand...
Click to collapse
Nope if phone is bricked enter fastboot mode and run enter edl.exe to enter edl,flash ROM using mi flash tool

adithyan25 said:
Nope if phone is bricked enter fastboot mode and run enter edl.exe to enter edl,flash ROM using mi flash tool
Click to expand...
Click to collapse
I did that but phone is still stuck . I'm getting infinite boot animation ?

ahh988 said:
I did that but phone is still stuck . I'm getting infinite boot animation ?
Click to expand...
Click to collapse
Boot animation or simply mi logo and then vibrating and again rebooting???
If mi flash tool shows successfully done without any errors then
Try this
Roeboot to fast boot and type
fastboot oem unlock-go
I guess it will be fixed

adithyan25 said:
Boot animation or simply mi logo and then vibrating and again rebooting???
If mi flash tool shows successfully done without any errors then
Try this
Roeboot to fast boot and type
fastboot oem unlock-go
I guess it will be fixed
Click to expand...
Click to collapse
I am stuck at boot animation with the three white dots spinning for ever ? will try to do as you said

I tried fastboot oem unlock-go but i get response: token verification failed and device still stuck on bootanimation

well, i think this caused by relocking bootloader after we flash a new firmware. if that happens, just go in fastboot mode by hold power button + volume down, then unlock it again using mi unlock. reboot it..your twrp is back.
no need to enter edl mode & install twrp again, btw thanks..this is helpful

nitephoenix said:
well, i think this caused by relocking bootloader after we flash a new firmware. if that happens, just go in fastboot mode by hold power button + volume down, then unlock it again using mi unlock. reboot it..your twrp is back.
no need to enter edl mode & install twrp again, btw thanks..this is helpful
Click to expand...
Click to collapse
always my pleasure
For some mi unlock stucks at 50%.. I was one of them...every time I try fails...so I found this was the only way for those who can't access it using mi unlock

tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted

nitephoenix said:
tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted
Click to expand...
Click to collapse
Yeah...I know that...but it does not support volte. .only abhisheks fw sprt volte

nitephoenix said:
tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted
Click to expand...
Click to collapse
@nitephoenix
Can we then flash update marshmallow global firmware this way? (Just delete emmc apsbot.mbn file inside the firmware). Thanks

Pleroma said:
@nitephoenix
Can we then flash update marshmallow global firmware this way? (Just delete emmc apsbot.mbn file inside the firmware). Thanks
Click to expand...
Click to collapse
don't flash official miui from twrp (you better do it in edl mode), but yes you can flash custom miui like miui eu, miuipro, multirom, epic miui etc from twrp. and..after u delete the emmc file inside the firmware which is included on every miui rom, your bootloader will be safe

nitephoenix said:
don't flash official miui from twrp (you better do it in edl mode), but yes you can flash custom miui like miui eu, miuipro, multirom, epic miui etc from twrp. and..after u delete the emmc file inside the firmware which is included on every miui rom, your bootloader will be safe
Click to expand...
Click to collapse
I used to flash it via twrp ..(by deleting bootllader file) followed by flashing lazyflasher...I didn't faced any prblm yet

Mine behaves different
I tried restoring the backup it started to back up and completed sucessfully but when i reboot there comes Mi logo and again it boots to TWRP Recovery .... Same case with any ROM ... Kindly tell me what to do.
ZCX recovery i have.

sarabeshsab said:
I tried restoring the backup it started to back up and completed sucessfully but when i reboot there comes Mi logo and again it boots to TWRP Recovery .... Same case with any ROM ... Kindly tell me what to do.
ZCX recovery i have.
Click to expand...
Click to collapse
Probably the problem with bootloader file

not a whole lot of talk anywhere else so i'll try here. i just got my kenzo few days ago, jumped the gun and started trying to get twrp on it. i'm assuming the bootloader was locked. As of right now it wont boot up, its in edl mode maybe... red led flashes and i can upgrade driver to 9008. sometimes its recognized by miflash and when it is and i try to flash stock fastboot it gives me an error. i know thats a lot to take in but i'm trying to cover all my bases. the phone came from overseas so sending it back isnt really an option. any help is appreciated.

Jjleininger said:
not a whole lot of talk anywhere else so i'll try here. i just got my kenzo few days ago, jumped the gun and started trying to get twrp on it. i'm assuming the bootloader was locked. As of right now it wont boot up, its in edl mode maybe... red led flashes and i can upgrade driver to 9008. sometimes its recognized by miflash and when it is and i try to flash stock fastboot it gives me an error. i know thats a lot to take in but i'm trying to cover all my bases. the phone came from overseas so sending it back isnt really an option. any help is appreciated.
Click to expand...
Click to collapse
Download eiter China based ROM or ROM from post.
Mi flash tool have many prolems.
Some tips:-
Make sure driver enforcement is disabled in PC.
All drivers including PDA net is installed.
Copy paste the unlocked bootloade file inside images folder and replace original one. Even after tryig this method it fails try my other method unbrick viafasrboot

uhm, this does not work for some reason...
i did everything as you said but in the end it just says cathasrophic error and something

After flashing i get Mi logo, vibration and reboot, please help

Error mode: error 11 no recovery, error 2 failed to load

Help
I tried to relock my bootloader but when the device restarted it went straight to error mode.
I managed to boot straight back to full system but whenever I restart it goes back to error mode. I cant enter fastboot or recovery mode.
I sont know what to do now any help
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Try to boot it again in the full system and from there try to unlock your bootloader.
If you done that, reinstall the software.

How can I unlock bootloader without fastboot? If I attempt to enter fastboot or anything that requires reboot I end up on that screen.

Hmm....
Have you tried rebooting to fastboot using adb?

Johnny TDN said:
Try to boot it again in the full system and from there try to unlock your bootloader.
If you done that, reinstall the software.
Click to expand...
Click to collapse
Johnny TDN said:
Hmm....
Have you tried rebooting to fastboot using adb?
Click to expand...
Click to collapse
I tried but still get to error mode.....I have tried many times

Then i don't know anymore dude. Have you tried reinstalling the firmware using the 3 button method?

elliotn said:
I tried but still get to error mode.....I have tried many times
Click to expand...
Click to collapse
Hello
tested with the toolkit 0.0.0.12.
to see if he recognizes the phone.
he should at least write your serial number.
if that is the case.
you can use DC-unlocker. to open FRP and can be the bootloader.
just an idea.

Dc unlocker needs cash and it doesn t always work.

I am doubting buying DC,unlocker in case,it doesn't work and I will lose money.... I will try toolkit.

3 button upgrade doesn't work either.

I have the same problem after I tried to relock my bootloader using SRKToolHuawei-STABLE-V1.3-20160619 with my bootloader code.
Have you found a solution?
I can boot back into os b394 after I let the battery run out to 0%
I haven't found a way to repair my recovery and fastboot yet because rebooting into fastboot always get's me back to that first error
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
Then I have to wait for my battery to run out again
Any help to get fast boot and a working recovery back would be appreciated.

Use Huawei multi tool ,then flash system, custom,recovery image ,
If stock recovery opens then use Dload method

shankarjdhv125 said:
Use Huawei multi tool ,then flash system, custom,recovery image ,
If stock recovery opens then use Dload method
Click to expand...
Click to collapse
I got stock recovery back with the warning that my device is unlocked. Now I get stuck at 'Your device is booting now'. After some time it reboots and opens eRecovery which I cannot use.
How do I get anything on my phone to continue with dload and which firmware would you advice me to flash if I finally get there.
Should I, if even possible at the moment, choose an older firmware version?
Edit: Would the original service rom help? Found it here https://forum.xda-developers.com/huawei-p9lite/help/original-service-rom-huawei-p9-lite-vns-t3688120 but my build number seems too high as the version I need only mentions b381 and b383 not the 394 I currently have..

Same problem for me
No way to shutdown the phone, someone have solved?
Now I'm waiting for the battery to full drain

Hi guys i ve made mistake because i wanted to update to latest release media pad m3 but i could not be able to boot to stock recovery after i flash recovery img extracted from update.app and second time i flash recovery2.img to erecovery partition and i got the same issue error Func No 11(recovery image) and Error NO 2 (load failed) . I also put the update.app to dload folder on sd card but update system is not starting i press volume up and down and power button at same time but is not working.I tried also with huawei multitool but is not working is not recognize my device. Please guys is any other solution to fix this ?Thank You!

I just fixed after power off device and then press volume down and plug the usb cable to pc and i was able to recognize my device and i have use huawei multiTool to unbrick my tablet media pad m3 and has work.

Almost the same problem, help please!!!
Hi guys someone can help me? I have a Honor 9 lite(LLD-L31). Android version 8.0
I apologize but I'm a new user and i don't have much practice with modding in general.
I tried to install root permission in my device. I get bootloader unlock code by DC-unlocker and installed TWPR on my device.
When i went in recovery the error " Failed to unmount '/system'(Device or resource busy)" rushed, so I tried to format data in order to give partition available. I tried again to flash file.zip but the search was empty so I downloaded a most recent version(3.2.3) of TWPR in recovery ramdisk.
Now if i try to log into recovery mode appear the same error (Error! func NO 11 / NO 2).
I can do everything aside going in recovery mode. How can I resolve it? Is it possible to reset to factory settings and try again?
I hope I have explained well the problem.

elliotn said:
3 button upgrade doesn't work either.
Click to expand...
Click to collapse
how about this 3 button method??

Astarothkun said:
I got stock recovery back with the warning that my device is unlocked. Now I get stuck at 'Your device is booting now'. After some time it reboots and opens eRecovery which I cannot use.
How do I get anything on my phone to continue with dload and which firmware would you advice me to flash if I finally get there.
Should I, if even possible at the moment, choose an older firmware version?
Edit: Would the original service rom help? Found it here https://forum.xda-developers.com/huawei-p9lite/help/original-service-rom-huawei-p9-lite-vns-t3688120 but my build number seems too high as the version I need only mentions b381 and b383 not the 394 I currently have..
Click to expand...
Click to collapse
Could you write down the steps you took to get back in fastboot for me? I'm having troule geting there myself after draining battery.

I fixed it after nothing else here worked.
So this is mostly so I dont ever forget the solution again, but also to possibly help others.
I also have to say that I had the problem with an P8 Lite, but all my problems matched almost exaclty, so It might help you too.
And a third disclaimer: I have no idea if you can flash the stock firmware without having the bootloader unlocked.
If you dont have it unlocked, try this wonderful updated guide: [Links are disabled for me so google this: "Droidhunter unlock huawei bootloader" and pick the article by droithunter.com]
And yes DC-Unlocker, suprisingly actually works (at least for me) and buying their bootloader unlock code was worth the 4 bucks.
So here is the solution:
1. Somehow, however needed get into fastboot. As I couldn't use the volume/power key combo myself, I somehow force reset the phone, pressing various buttons until I managed to boot into it again. I then used the adb bridge to boot into fastboot (google how to connect adb, then use "adb reboot bootloader" to get into the fastboot menu).
2. Download your phone models default stock rom/Update.app (also google that).
3. Extract the Update.app file.
4. Download and use the HuaweiUpdateExtractor tool and open the Update.app file (google again helps).
5. Select the "09.recovery.img" entry (the one with the green arrow on the left), rightclick and select "extract selected" and save it somewhere where you can find it.
6. Open your Fastboot console on PC (its often the same as the ADB console used before, especially if you use Minimal Fastboot and ADB, which I would recommend).
7. Make sure your phone is in Fastboot mode (not recovery) and connected to the pc.
7.1 Make sure your bootloader is unlocked. It might work with a locked one because youre just flashing stock firmware but eh might break more. Its worth the 4 bucks to unlock the bootloader first. (and yes DC unlocker looks super sketchy but somehow it actually worked for me and wasnt a scam).
8. Flash a custom recovery onto the phone (pretty much the same way you flash twrp, but instead of the twrp image you use the .img file you just extracted from the Update.app; Also dont try flashing twrp directly, it will probably not work).
The command to do so is: "fastboot flash recovery [filepath to the .img file without the brackets]".
9. Use the command "fastboot reboot".
10. If your phone doesnt boot normally, use the key combinations to get into the normal recovery screen and recover from a file or whatever (other guides should work from here).
Extra Steps:
As my recovery image was obviously so broken that even flashing twrp on top of it didnt work until I flashed the original reovery image, I went into my phones settings and did a factory reset. Directly after I installed twrps (see google) and set it up so it had full control. Afterwards I rooted and installed LinageOS cause frick EMUI rn).
Hope this helps anyone. If you have any questions feel free to ask me.

Lost /data partition, cannot flash stock rom

HTML:
[QUOTE][/QUOTE]
Hi
I have bricked my phone with a failed TWRP install. The data partition became corrupted and I need to restore. I have tried to move UPDATE.zip via ADB but phone says not enough space. Should I flash new img files (system, data)? If so, where can I get these? My model is VNS-L22 dual SIM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks

Did you try with dload from sd card ? you can try to find a rom with firmware finder-here or from http://pro-teammt.ru-here, its best to download FullOTA-MF-PV version.
You can always try this Huawei Multi-Tool 8

I'm in simmilar situation. Cannot format, convert /data partiton.
Not sure which version of ROM I've had. Probably stock B504 -> EliteROM - fault with boot --> tried app back to stock and now from version from shown by some adb command B130.
Which version should I put inyo dload to start getting back to stock?

TyDraniu said:
I'm in simmilar situation. Cannot format, convert /data partiton.
Not sure which version of ROM I've had. Probably stock B504 -> EliteROM - fault with boot --> tried app back to stock and now from version from shown by some adb command B130.
Which version should I put inyo dload to start getting back to stock?
Click to expand...
Click to collapse
Hi dude,
if you try to be a little more detailed
about the recovery you used and the last stock firmware you had
and what you did trying to get back from EliteRom maybe,
I say maybe someone could help you...
Cheers

The thing is that I'm not sure
I've tried so many combination that I'm not sure what was the last.
Last working soft was latest official firmware from huawei p9 lite in Poland - I think it was B504.
Then I've tried to install [Elite ROM][EMUI 5.1.1] Elite ROM v7.7 - it wont boot up, i've get bootloop.
Then I tried to use dload folder to get back to stock - VNS-L21C432B130 it was installed succesfully but system wont boot up - bootloop again.

TyDraniu said:
The thing is that I'm not sure
I've tried so many combination that I'm not sure what was the last.
Last working soft was latest official firmware from huawei p9 lite in Poland - I think it was B504.
Then I've tried to install [Elite ROM][EMUI 5.1.1] Elite ROM v7.7 - it wont boot up, i've get bootloop.
Then I tried to use dload folder to get back to stock - VNS-L21C432B130 it was installed succesfully but system wont boot up - bootloop again.
Click to expand...
Click to collapse
Ok man i will try to help you but beginning from now
you should do one thing at a time...
Due the fact you tried to flash B130 your bootloader could be re-locked again,
so boot into the fastboot mode and unlock it again... the device should restart in TWRP recovery mode...
Once you're in TWRP tap WIPE > FACTORY RESET > restart system.
If won't boot it need to be unbricked...

PHONE: Unlocked
FRP: Unlocked
In this moment there is no TWRP:
power + vol + = EMUI: reboot, wipe, wipe.

TyDraniu said:
PHONE: Unlocked
FRP: Unlocked
In this moment there is no TWRP:
power + vol + = EMUI: reboot, wipe, wipe.
Click to expand...
Click to collapse
Dude boot into the EMUI e-recovery and do a factory reset + wipe cache..
Doesn't it boot to system ?

It doesn't.
After boot it's stuck on black screen.

TyDraniu said:
It doesn't.
After boot it's stuck on black screen.
Click to expand...
Click to collapse
Boot into the fastboot mode and unlock again the bootloader.
Try then to reboot to system.

As I said bootloader is unlocked. When I've executed : fastboot oem get-bootinfo i've received: (bootloader) unlocked
when i've executed: fastboot oem unlock "my_unlock_code" i've received FAILED (remote: already fastboot unlocked)
other suggestions?
--------------------------------
I'm not sure if it's a progress but...
1. fastboot: flash working twrp
2. twrp flash oeminfo.img for L21c432 DS
3. restart - auto factory reset
4. Flash with Multi-Tool: boot, system, recovery, cust from b160
5. put into SDcard dload\update.app from b160
6. phone started booting and goes to huawei logo with some shiny effect - and stuck on it .....
What I'm doing wrong?

TyDraniu said:
As I said bootloader is unlocked. When I've executed : fastboot oem get-bootinfo i've received: (bootloader) unlocked
when i've executed: fastboot oem unlock "my_unlock_code" i've received FAILED (remote: already fastboot unlocked)
other suggestions?
--------------------------------
I'm not sure if it's a progress but...
1. fastboot: flash working twrp
2. twrp flash oeminfo.img for L21c432 DS
3. restart - auto factory reset
4. Flash with Multi-Tool: boot, system, recovery, cust from b160
5. put into SDcard dload\update.app from b160
6. phone started booting and goes to huawei logo with some shiny effect - and stuck on it .....
What I'm doing wrong?
Click to expand...
Click to collapse
Seems all good, apart after you flashed oeminfo.img you have to flash custom.bin file together.
(maybe you need the TOOLKIT (take august 2017 release) to flash oeminfo.img&custom.bin files)
This should re-lock the bootloader, so when the process ends, reboot to fastboot , unlock again
the bootloader and forwards with the other steps..
At the end of the whole process reboot to recovery and do a factory reset + clear cache...

"(maybe you need the TOOLKIT (take august 2017 release) to flash oeminfo.img&custom.bin files)" - to do it I have to put phone into ADB mode.
oeminfo.zip I can flash in TWRP.
I don't know how to flash custom.bin

TyDraniu said:
"(maybe you need the TOOLKIT (take august 2017 release) to flash oeminfo.img&custom.bin files)" - to do it I have to put phone into ADB mode.
oeminfo.zip I can flash in TWRP.
I don't know how to flash custom.bin
Click to expand...
Click to collapse
Hi dude,
so look into the zip oeminfo.
If there are both oeminfo.img and custom.bin files
you are ok to flash in TWRP.
( in your previous post you wrote you flashed oeminfo.img file, not flashable zip )
If into the zip there is only oeminfo.img file you need that custom.bin file.

In oeminfo.zip file there is always only oeminfo.img and some other config files.
Every time when I find custom.bin it is always a standalone file. I cannot find zip to flash on TWRP with custom.bin

TyDraniu said:
In oeminfo.zip file there is always only oeminfo.img and some other config files.
Every time when I find custom.bin it is always a standalone file. I cannot find zip to flash on TWRP with custom.bin
Click to expand...
Click to collapse
Don't know dude, maybe you used some wrong files...
This time use this steps:
Install and use TWRP 3.0.2-0 ( this should be Meticulus recovery )
THIS oeminfo.zip file is a L21C432DS flashable one ( took from htcmania site )
The direct LINK to download L21C432B160 update.zip ( using FIRMWARE FINDER )
from with extract update.app and use DLOAD method.
1 - Reboot recovery and flash the oeminfo.zip file.
2 - Once finished the device should reboot to twrp recovery.
3 - Power off the device. Extract the SD card and with your PC format it. ( backup your files )
4 - Create the DLOAD folder in your SD and paste update.app you extracted from update.zip into it.
5 - Put the SD into the device and use three buttons ( vol+&vol-&power ) to start the flash process.
6 - When finished reboot to e-recovery ( vol+ and power buttons ) and do factory reset + clear cache.
7 - Dude you should be ok now.
P.S.: THIS oeminfo.zip is took from @k1ll3r8e personal repo ( can be flashed with the toolkit in fastboot mode )

Unlocked bootloader, TWRP 3.0.2-0 (Meticulus recovery ) installed.
1. - Reboot recovery and flash the oeminfo.zip file. - done
2 - device doesn't reboot, I've rebooted it manually - reboot recovery.
"Your device has failed verification" appeared and device boot into huawei recovery (options: reboot, wipe data/factory and wipe cache).
3. no option to turn off.
4. I've made SDcard.
5. restart by power and vol+ and vol - : installing update.............
6. When finished phone restarted automatically, i've pressed vol+ and got into recovery, done wipe data/fr and wipe cache and reboot ............... and ....................... black screen.
Now I'm waiting to be sure ~ 15 minutes...
Without any changes.
I've tried the same with B130 - same result. From power on there is logo huawei na blank screen with wisible backlight.
Any ideas?

TyDraniu said:
Unlocked bootloader, TWRP 3.0.2-0 (Meticulus recovery ) installed.
1. - Reboot recovery and flash the oeminfo.zip file. - done
2 - device doesn't reboot, I've rebooted it manually - reboot recovery.
"Your device has failed verification" appeared and device boot into huawei recovery (options: reboot, wipe data/factory and wipe cache).
3. no option to turn off.
4. I've made SDcard.
5. restart by power and vol+ and vol - : installing update.............
6. When finished phone restarted automatically, i've pressed vol+ and got into recovery, done wipe data/fr and wipe cache and reboot ............... and ....................... black screen.
Now I'm waiting to be sure ~ 15 minutes...
Without any changes.
I've tried the same with B130 - same result. From power on there is logo huawei na blank screen with wisible backlight.
Any ideas?
Click to expand...
Click to collapse
Damn, my apologies dude :angel:,
i forgot a line between point 1 & 2, let's call it 1.1.
So > 1.1 - After you flash oeminfo.zip go in main menu of TWRP
and tap reboot then bootloader.
Connect to pc and unlock again the bootloader.
Proceed with point 2....

1. - Reboot recovery and flash the oeminfo.zip file. - done
1.1 - After flash oeminfo.zip go in main menu of TWRP, reboot to bootloader, connect to pc and unlock again the bootloader.
2 - device reboot to twrp.
3. turn off.
4. I've made SDcard.
5. restart by power and vol+ and vol - : installing update.............
6. When finished phone restarted automatically, i've pressed vol+ and got into recovery, done wipe data/fr and wipe cache and reboot and power on there is logo huawei na blank screen with wisible backlight.... again
Everything goes as You wrote...
I'm loosing rest of hope...
Maybe it's physicaly broken somehow?!

TyDraniu said:
1. - Reboot recovery and flash the oeminfo.zip file. - done
1.1 - After flash oeminfo.zip go in main menu of TWRP, reboot to bootloader, connect to pc and unlock again the bootloader.
2 - device reboot to twrp.
3. turn off.
4. I've made SDcard.
5. restart by power and vol+ and vol - : installing update.............
6. When finished phone restarted automatically, i've pressed vol+ and got into recovery, done wipe data/fr and wipe cache and reboot and power on there is logo huawei na blank screen with wisible backlight.... again
Everything goes as You wrote...
I'm loosing rest of hope...
Maybe it's physicaly broken somehow?!
Click to expand...
Click to collapse
Hope no dude...
Try the rollback package, maybe something gone wrong going from android 7 to android 6.
THIS is the L21 rollback package (C900B300)
With your PC format the SD card nd create a DLOAD folder.
Extract update.app from the package, put it in the DLOAD folder and do three buttons method.
When finished turn off the device and extract the SD.
Remove the update.app from DLOAD folder and paste the update.app you
extracted from update.zip (B160) into it.
Boot again with three button method to flash the firmware..
The same, reboot to e-recovery and do factory reset + clear cache..
Hope this will work.

I have problem with recovery. Help please !

Hi. First i want to say is sorry for my bad english.
I unlocked the bootloader of my g6 and i have flashed Twrp recovery, but when i try to go to recovery mode i have this messege : " your device cannot be checked for corruption . please lock the bootloader ".
Can anyone tell me how to resolve this because i want to flash custom roms but i cant because i cant go to recovery mode..
Help me please.
Sorry if there was a topic like this, but i can not find a solution to this problem.
Now i see when i go to ADB folder and write the command " adb reboot recovery " after the reboot it says " No Command " and i cant do nothing .. I cant flash.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you mean this screen ^ that is a normal screen that appears, with every power up / restart, after the bootloader has been unlocked.
I think of it as a "red badge of courage".
As to the question about adb commands, what is it that you are trying to accomplish?

Some more information is needed to help you.
What is your model (h870, us997)?
Are you sure you properly installed twrp (reboot to bootloader, fastboot flash recovery twrp.img)?
Which version of twrp did you use (official, Melina, eliminater's (recommended))?
Regarding your adb problem - do you fail to reboot to recovery using adb from within? Have you tried to turn it off and on again?? I mean, turn it off and try the button combination to enter recovery (turn on holding vol- and power, when logo appears, release power and quickly press again and keep holding both until "factory reset", confirm twice).
Information is key!
PS as the previous poster wrote - if you unlock your bootloader you get the warning screen, just ignore it.

niksjdm said:
Hi. First i want to say is sorry for my bad english.
I unlocked the bootloader of my g6 and i have flashed Twrp recovery, but when i try to go to recovery mode i have this messege : " your device cannot be checked for corruption . please lock the bootloader ".
Can anyone tell me how to resolve this because i want to flash custom roms but i cant because i cant go to recovery mode..
Help me please.
Sorry if there was a topic like this, but i can not find a solution to this problem.
Now i see when i go to ADB folder and write the command " adb reboot recovery " after the reboot it says " No Command " and i cant do nothing .. I cant flash.
Click to expand...
Click to collapse
the "your device cannot be checked for corruption" screen is normal, it happens when you unlock the bootloader, no issue there, in order to install TWRP you must:
1. plug your phone in and type 'adb reboot-bootloader' to boot into fastboot mode
2. flash the twrp image via 'fastboot flash recovery TWRPIMAGENAME.img'
3. This is important!: type 'fastboot reboot' and hold the rear button and volume down during the shutdown!, when the LG logo shows up quickly release JUST the rear button and press/hold it again, you should see a factory reset prompt screen, press yes both times, and you should be dumped into TWRP, at this point you can reboot from within TWRP and you should be fine.
Explanation:
the stock LG rom with overwrite the recovery if it determines it has been changed, by booting to TWRP before booting the ROM, TWRP will modify the ROM to stop it from overwriting the recovery allowing TWRP to stay after booting.
I hope this helps

Mnky313 said:
the "your device cannot be checked for corruption" screen is normal, it happens when you unlock the bootloader, no issue there, in order to install TWRP you must:
1. plug your phone in and type 'adb reboot-bootloader' to boot into fastboot mode
2. flash the twrp image via 'fastboot flash recovery TWRPIMAGENAME.img'
3. This is important!: type 'fastboot reboot' and hold the rear button and volume down during the shutdown!, when the LG logo shows up quickly release JUST the rear button and press/hold it again, you should see a factory reset prompt screen, press yes both times, and you should be dumped into TWRP, at this point you can reboot from within TWRP and you should be fine.
Explanation:
the stock LG rom with overwrite the recovery if it determines it has been changed, by booting to TWRP before booting the ROM, TWRP will modify the ROM to stop it from overwriting the recovery allowing TWRP to stay after booting.
I hope this helps
Click to expand...
Click to collapse
THANK YOU SO MUCH .. It works .. The problem was in the buttons.

I have another problem.. When i try to go to recovery..the only what i see is the logo of TWRP and then the phone just reboot and i cant do nothing.. The phone is h870. What i have to do to have normal TWRP because i want to root it..

Try another twrp version. For Oreo afaik only Melina and Eliminater (which is a continuation of Melina) work. I recommend Eliminater's version, it's up to date (v3.2.3) and backup works - at least for me. I'm on H870 Oreo 20b.
For Nougat I have no experience, as I got my phone recently and never downgraded. But as I understand it from others' experiences, for full custom ROM functionality (e.g. fingerprint) Nougat bootloader is preferable. Search the forum, the information is there!

niksjdm said:
I have another problem.. When i try to go to recovery..the only what i see is the logo of TWRP and then the phone just reboot and i cant do nothing.. The phone is h870. What i have to do to have normal TWRP because i want to root it..
Click to expand...
Click to collapse
grushnickij said:
Try another twrp version. For Oreo afaik only Melina and Eliminater (which is a continuation of Melina) work. I recommend Eliminater's version, it's up to date (v3.2.3) and backup works - at least for me. I'm on H870 Oreo 20b.
For Nougat I have no experience, as I got my phone recently and never downgraded. But as I understand it from others' experiences, for full custom ROM functionality (e.g. fingerprint) Nougat bootloader is preferable. Search the forum, the information is there!
Click to expand...
Click to collapse
Yes, I use Melina TWRP, flash Version rel_o2 (or latest) using the method I said above.

Where i can find those versions of Twrp ( melina, eliminater ) ?

niksjdm said:
Where i can find those versions of Twrp ( melina, eliminater ) ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg-g6/development/twrp-t3828254
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-3-2-1-unofficial-fixes-t3722199
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-lg-g6-us997-unofficial-t3629883
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-3-1-x-t3627595