Hi guys:
I am Nokia 6 TA 1000 user, I got my Oreo update , everything is working fine,except one most important option.
Enhanced 4g LTE mode.
I am using Jio 4g sim which will provide volte now I am not able use that option and I am not able to make a call, incoming call also not receiving.
Actually before Oreo update I was able to use that option which is available in mobile network settings ,but now I am not getting that option. When I search that option in settings its coming in search results but when I click and navigate I am not getting that.
I think viewers able to understand my issue :crying:
Kindly share your knowledge about these guys I really frustrated by contacting mobile network and Nokia support none of them are helping. I think you guys will find any solution for this thanks advance for your reply.
rpk2005 said:
Hi guys:
I am Nokia 6 TA 1000 user, I got my Oreo update , everything is working fine,except one most important option.
Enhanced 4g LTE mode.
I am using Jio 4g sim which will provide volte now I am not able use that option and I am not able to make a call, incoming call also not receiving.
Actually before Oreo update I was able to use that option which is available in mobile network settings ,but now I am not getting that option. When I search that option in settings its coming in search results but when I click and navigate I am not getting that.
I think viewers able to understand my issue :crying:
Kindly share your knowledge about these guys I really frustrated by contacting mobile network and Nokia support none of them are helping. I think you guys will find any solution for this thanks advance for your reply.
Click to expand...
Click to collapse
First of all use preferred network mode as LTE then it might appear there, also it because, TA-1000 is Chinese varient so this might have the issue with network band support, try change the network type as LTE
If doesn't work
Dial *#*#4636#*#*
Select phont info
Then preferred network type as LTE/WCDMA
sltushar said:
First of all use preferred network mode as LTE then it might appear there, also it because, TA-1000 is Chinese varient so this might have the issue with network band support, try change the network type as LTE
If doesn't work
Dial *#*#4636#*#*
Select phont info
Then preferred network type as LTE/WCDMA
Click to expand...
Click to collapse
I even tried your steps bro.I am not getting that option.even I contacted mobile network team from their side everything is good..if I use same sim to other mobile its working good.
Kindly help on my issue.
Thanks in advance
rpk2005 said:
I even tried your steps bro.I am not getting that option.even I contacted mobile network team from their side everything is good..if I use same sim to other mobile its working good.
Kindly help on my issue.
Thanks in advance
Click to expand...
Click to collapse
Okay, so the problem is confirmed
Due to Chinese varient, after oreo update they removed VoLTE option
But there is still option
Try resetting your device
Hope it will work
If not
Tell me
I will tell you one more solution
sltushar said:
Okay, so the problem is confirmed
Due to Chinese varient, after oreo update they removed VoLTE option
But there is still option
Try resetting your device
Hope it will work
If not
Tell me
I will tell you one more solution
Click to expand...
Click to collapse
I tried resetting my phone its not working . kindly give me some solution bro.
Thanks in advance for your reply
rpk2005 said:
I tried resetting my phone its not working . kindly give me some solution bro.
Thanks in advance for your reply
Click to expand...
Click to collapse
Goto this 1st page of this thread
https://forum.xda-developers.com/nokia-6/how-to/updated-mirror-link-ota-monthly-updates-t3733784
Download December nougat OTA and February oreo OTA
Put them into the External SD card
Goto recovery mode
If you don't know how to enter to recovery
Follow this steps
Power off your device
Now plug your charger
Wait for battery charging animation
Once you see the animation
Press and Hold power button and volume plus button
As soon as you see the android logo
Release the power button but keep holding volume plus button
After few seconds you will see a screen with written no commands
Now release volume plus key
And just hit these three button together, don't hold it
Power button+volume plus button+home key(fingerprint sensor)
2-3 times, and you will see the recovery menu
If not, try holding power and volume plus button for few seconds
After having the recovery menu
Goto the option, update from sd card, remember internal storage wont show here so you need to have the sd card
Goto the location where you kept those 2 files
Now first install December OTA
It will give you error but dont worry
Just restart your device
And you will be enter to the recovery menu automatically
Now again select updates from sd card
And now this time select February oreo OTA
Done, it will reboot automatically once it installed
One more thing after update reset your device or you will face some bugs
Enjoy
Hit thanks button if you find this helpful
Happy flashing
sltushar said:
Goto this 1st page of this thread
https://forum.xda-developers.com/nokia-6/how-to/updated-mirror-link-ota-monthly-updates-t3733784
Download December nougat OTA and February oreo OTA
Put them into the External SD card
Goto recovery mode
If you don't know how to enter to recovery
Follow this steps
Power off your device
Now plug your charger
Wait for battery charging animation
Once you see the animation
Press and Hold power button and volume plus button
As soon as you see the android logo
Release the power button but keep holding volume plus button
After few seconds you will see a screen with written no commands
Now release volume plus key
And just hit these three button together, don't hold it
Power button+volume plus button+home key(fingerprint sensor)
2-3 times, and you will see the recovery menu
If not, try holding power and volume plus button for few seconds
After having the recovery menu
Goto the option, update from sd card, remember internal storage wont show here so you need to have the sd card
Goto the location where you kept those 2 files
Now first install December OTA
It will give you error but dont worry
Just restart your device
And you will be enter to the recovery menu automatically
Now again select updates from sd card
And now this time select February oreo OTA
Done, it will reboot automatically once it installed
One more thing after update reset your device or you will face some bugs
Enjoy
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
Thanks for ur reply bro
Whether there is any possible way without flashing device...
Its TA 1021 ROM whether it will support TA 1000...
And I have to confirm if we receive other updates from hmd for 1021 whether I can able to install that or whether I will receive all security patch updates..??
Else I any of your team guys having TA 1000 stock ROM with January update ..if you guys have please share that .kindly give me steps to install that....on my mobile then will be in 7.1 with January security patch. If I go for update and search I will get Oreo update if I want to switch I can able to switch to Oreo bro..
I think you understand my queries if u are able to help kindly give solution . many of the guys using TA 1000 are facing this issue..why they got disabled this option ..really frustrated bro
Thanks for your reply bro
rpk2005 said:
Thanks for ur reply bro
Whether there is any possible way without flashing device...
Its TA 1021 ROM whether it will support TA 1000...
And I have to confirm if we receive other updates from hmd for 1021 whether I can able to install that or whether I will receive all security patch updates..??
Else I any of your team guys having TA 1000 stock ROM with January update ..if you guys have please share that .kindly give me steps to install that....on my mobile then will be in 7.1 with January security patch. If I go for update and search I will get Oreo update if I want to switch I can able to switch to Oreo bro..
I think you understand my queries if u are able to help kindly give solution . many of the guys using TA 1000 are facing this issue..why they got disabled this option ..really frustrated bro
Thanks for your reply bro
Click to expand...
Click to collapse
Look the answer is same, this is Chinese varient of nokia 6 so why they disabled this option i even don't know
Yes, this is TA-1025 OTA, and you will able to get the future updates also
No need to go back,
The problem is you device's bootloader is updated and downgrade could make your device dead or something else, thats why i preferred the above option to solve your issue
So i would suggest you to go with the method i provided above
Hit Thanks button if you find this useful
Happy flashing
sltushar said:
Look the answer is same, this is Chinese varient of nokia 6 so why they disabled this option i even don't know
Yes, this is TA-1025 OTA, and you will able to get the future updates also
No need to go back,
The problem is you device's bootloader is updated and downgrade could make your device dead or something else, thats why i preferred the above option to solve your issue
So i would suggest you to go with the method i provided above
Hit Thanks button if you find this useful
Happy flashing
Click to expand...
Click to collapse
In the given link what are the two files I have to download.
Kindly give me details
Thanks
rpk2005 said:
In the given link what are the two files I have to download.
Kindly give me details
Thanks
Click to expand...
Click to collapse
December 2017 OTA and February Official Oreo OTA
rpk2005 said:
Hi guys:
I am Nokia 6 TA 1000 user, I got my Oreo update , everything is working fine,except one most important option.
Enhanced 4g LTE mode.
I am using Jio 4g sim which will provide volte now I am not able use that option and I am not able to make a call, incoming call also not receiving.
Actually before Oreo update I was able to use that option which is available in mobile network settings ,but now I am not getting that option. When I search that option in settings its coming in search results but when I click and navigate I am not getting that.
I think viewers able to understand my issue :crying:
Kindly share your knowledge about these guys I really frustrated by contacting mobile network and Nokia support none of them are helping. I think you guys will find any solution for this thanks advance for your reply.
Click to expand...
Click to collapse
https://forum.xda-developers.com/nokia-6/how-to/ta-1000-1003-oreo-instruction-to-flash-t3746460
Flash TA-1003 firmware (global version), it's full compatible with TA-1000, not use TA-1025 or TA-1021 (diferent phones).
ACARAGIA said:
https://forum.xda-developers.com/nokia-6/how-to/ta-1000-1003-oreo-instruction-to-flash-t3746460
Flash TA-1003 firmware (global version), it's full compatible with TA-1000, not use TA-1025 or TA-1021 (diferent phones).
Click to expand...
Click to collapse
Thanks bro but without flashing any other possible way is there to solve that problem??.
Then kindly share detailed steps for flashing 1000 to 1003
It will be useful for many guys to escape from this problem..
rpk2005 said:
Thanks bro but without flashing any other possible way is there to solve that problem??.
Click to expand...
Click to collapse
No.
ACARAGIA said:
No.
Click to expand...
Click to collapse
I am with Feb patch now any steps I need to change or same process which you have mentioned
I am using TA-1003 and there is same issue. I am not able to call also. It was ok with 7.1 but it failed after Oreo Update. I am waiting for March Security Update but not sure if this problem will be sorted out or not!
irphanahmad said:
I am using TA-1003 and there is same issue. I am not able to call also. It was ok with 7.1 but it failed after Oreo Update. I am waiting for March Security Update but not sure if this problem will be sorted out or not!
Click to expand...
Click to collapse
Then I won't flash with TA 1003 even after flashing if it won't work then it will be waste.
Go through TA-1025, THIS WILL HELP U
sltushar said:
Go through TA-1025, THIS WILL HELP U
Click to expand...
Click to collapse
I think 1025 is us variant whether it will support VOlTE I need to know after Oreo update 1025 is really good in volte function or not???
If is OK then I need files and steps to flash on TA 1000 to TA 1025.
Else I need another confirmation, I am in India .whether I can able to flash my TA 1000 to Indian os version it is compatible???
Indian Oreo version of Nokia is supporting volte function so will try to flash that.
Kindly help and thanks for ur reply
rpk2005 said:
I think 1025 is us variant whether it will support VOlTE I need to know after Oreo update 1025 is really good in volte function or not???
If is OK then I need files and steps to flash on TA 1000 to TA 1025.
Else I need another confirmation, I am in India .whether I can able to flash my TA 1000 to Indian os version it is compatible???
Indian Oreo version of Nokia is supporting volte function so will try to flash that.
Kindly help and thanks for ur reply
Click to expand...
Click to collapse
1025,1021,1033,1039 all work VoLTE
---------- Post added at 10:59 AM ---------- Previous post was at 10:56 AM ----------
rpk2005 said:
I think 1025 is us variant whether it will support VOlTE I need to know after Oreo update 1025 is really good in volte function or not???
If is OK then I need files and steps to flash on TA 1000 to TA 1025.
Else I need another confirmation, I am in India .whether I can able to flash my TA 1000 to Indian os version it is compatible???
Indian Oreo version of Nokia is supporting volte function so will try to flash that.
Kindly help and thanks for ur reply
Click to expand...
Click to collapse
1025,1021,1033,1039 all supports VoLTE after oreo
sltushar said:
1025,1021,1033,1039 all work VoLTE
---------- Post added at 10:59 AM ---------- Previous post was at 10:56 AM ----------
1025,1021,1033,1039 all supports VoLTE after oreo
Click to expand...
Click to collapse
Thanks kindly share steps and files to flash 1025
Related
Hi guys,
I'm providing a solution which was found by member kv123 to install and use D6603 Lollipop update on D6633
I seriously suggest you to wait for an official D6633 Lollipop update which we are not far away from it's release. I'm not responsible for any damage that may happen to your phone. You take the risk by yourself
At first step you need a rooted device and a recovery installed. For those who doesn't have any, use below link to find how you can root your D6633 phone:
http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
At next step you have to flash the zip file of pre-rooted D6603 Lollipop firmware in recovery, provided in the below link (Wipe your phone before flashing pre-rooted. Zip including dalvick and cache, and do not reboot your phone before flashing radio patch in next step) :
http://forum.xda-developers.com/z3/development/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Now you have to flash a zip which will patch radio to activate both Sims on your Xperia Z3 Dual phone (After flashing this radio patch do a factory reset directly from recovery before rebooting to system) :
http://d-h.st/MwgK
Not working:
-USSD code
-Settings->Calls force close
Thanks to: kv123
I saw the method yesterday by luck and it worked. Thank you for creating a thread for this to make it easier to find. And thank you kv123
minamfm said:
I saw the method yesterday by luck and it worked. Thank you for creating a thread for this to make it easier to find. And thank you kv123
Click to expand...
Click to collapse
i try many method but no luck in booting z3 dual in home menu.
this method my phone start normally and android is upgrading about 328 app,
to can enter to settings i can enter from the lock screen i swipe down the screen to notification and enter to the settings menu
the camera work from the shutter key, and the manual mode dosnt work i get errore camera not found.
when try to go to the home , or from booting to hme i get errore in home screen or home menu,
both sim working but with this errore i cant use my phone cz i cant go to any application.
Unfortunately, InitialBootSetup has stopped.
i try this method and it work.
i go to z3 d6603 firmware ftf .93 and i root it
it flash the patch to z3dual work , and both sim work.
after i preserve root of android 5 .690
my phone work perfectly now.
this is the safe method to z3 dual work in android 5 firmware of z3 d6603.
10x you
Great!!!!!!
Thaaaaanks alot.. It worked awesome update..
I have two problems :
- I can't use USSD services.. Can't see my credit
- I can't choose which sim will use when sending a message..
Is there a solution?
Sent from my D6603 using XDA Free mobile app
The only problem is the phone force closing when trying to enter the setting.
Other than that, everything works fine. Both sims work.
same problem
alfatih610 said:
Great!!!!!!
Thaaaaanks alot.. It worked awesome update..
I have two problems :
- I can't use USSD services.. Can't see my credit
- I can't choose which sim will use when sending a message..
Is there a solution?
Sent from my D6603 using XDA Free mobile app
Click to expand...
Click to collapse
same problem if you update to android 5 and flash the patch
Thank U
running almost one hundred percent
Error in call settings
error in the USSD code
message does not select which chip
sorry my bad English I'm from Brazil
alfatih610 said:
Great!!!!!!
Thaaaaanks alot.. It worked awesome update..
I have two problems :
- I can't use USSD services.. Can't see my credit
- I can't choose which sim will use when sending a message..
Is there a solution?
Sent from my D6603 using XDA Free mobile app
Click to expand...
Click to collapse
Solution, not yet. But i don't have any problem with choosing default Sim for sending sms, its just a restriction not an issue. About USSD its the only thing that is not working for me and i have left it till the release of D6633 Lollipop firmware
Wow it's great Everything is working fine 100% Awesome. In my country you had to wait more for an official update but it is doing everything :good:
persian_redhat said:
Hi guys,
I'm providing a solution which was found by member kv123 to install and use D6603 Lollipop update on D6633
I seriously suggest you to wait for an official D6633 Lollipop update which we are not far away from it's release. I'm not responsible for any damage that may happen to your phone. You take the risk by yourself
At first step you need a rooted device and a recovery installed. For those who doesn't have any, use below link to find how you can root your D6633 phone:
http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
At next step you have to flash the zip file of pre-rooted D6603 Lollipop firmware in recovery, provided in the below link (Wipe your phone before flashing pre-rooted. Zip including dalvick and cache, and do not reboot your phone before flashing radio patch in next step) :
http://forum.xda-developers.com/z3/development/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Now you have to flash a zip which will patch radio to activate both Sims on your Xperia Z3 Dual phone (After flashing this radio patch do a factory reset directly from recovery before rebooting to system) :
http://d-h.st/MwgK
Not working:
-USSD code
-Settings->Calls force close
Thanks to: kv123
Click to expand...
Click to collapse
Thanks a lot man! Your step by step manual is great and its working
Also i must say, that you are a great person, because you found a time, you added me on line and you were converse with me while i was doing this Without you, i think, i would be on 4.4.4 now
But here is 1 thing i dont like... On lock screen on the bottom here is an ugly inscription: Sim1, Sim2 etc... But its only a cosmetic defect I am not using USSD
Thank you very much again!
Hey buddy
Thanks a lot, just flashed the lollipop build and patch. All good.
Like you said only call settings not working.. Does any one have any idea on how to get it working? If possible.
And also any eta update on d6633 getting lollipop.. Checking the net and can't find any recent update or eta
I can use this patch whit official cm 12?
I have question
After syncing my contacts when a call comes in the call screen shows one solid color (for e.g. blue) and then the contact picture in small circle.
Is normal?? doesnt the call picture take half the screen instead of a small circle?? Is this happening for everyone on D6633 with this lollipop firmware?
jagdesh said:
I have question
After syncing my contacts when a call comes in the call screen shows one solid color (for e.g. blue) and then the contact picture in small circle.
Is normal?? doesnt the call picture take half the screen instead of a small circle?? Is this happening for everyone on D6633 with this lollipop firmware?
Click to expand...
Click to collapse
If i got what you said in a right way, yes its normal and one of the features of Lollipop. If you touch the blue screen message of incoming call, it will fill all the screen then, and you'll see full-screen contact picture
mercuriox85 said:
I can use this patch whit official cm 12?
Click to expand...
Click to collapse
I don't think so
persian_redhat said:
If i got what you said in a right way, yes its normal and one of the features of Lollipop. If you touch the blue screen message of incoming call, it will fill all the screen then, and you'll see full-screen contact picture
Click to expand...
Click to collapse
Now I am confused!!
Anyways here is the a screen shot .... As you can see the contact picture appears to be in a small circle and the background is all blue.
Is this normal? I thought the blue solid color screen part should be filled with the contact picture isnt it?
jagdesh said:
Now I am confused!!
Anyways here is the a screen shot .... As you can see the contact picture appears to be in a small circle and the background is all blue.
Is this normal? I thought the blue solid color screen part should be filled with the contact picture isnt it?
Click to expand...
Click to collapse
You have to ask it on Android 5.0 L for Z3 thread as I think its about Sony's update and not related to radio patch
persian_redhat said:
You have to ask it on Android 5.0 L for Z3 thread as I think its about Sony's update and not related to radio patch
Click to expand...
Click to collapse
Is this the way it looks for you or everyone else using lollipop with radio patch on D6633??
the reason I am asking this here first is that maybe its due to the different model firmwares being flashed...If this is the way it looks for all D6633 lollipop users then its okay other if this only for me then I will check in the lollipop thread..
BTW this is how its looks when you make a call, similar is the look for incoming calls
persian_redhat said:
You have to ask it on Android 5.0 L for Z3 thread as I think its about Sony's update and not related to radio patch
Click to expand...
Click to collapse
It seems this is bug which is appearing in the ported lollipop version ... I had asked this in the Lollipop for z3 thread and some users have reported that this is bug since the official lollipop version does not have this bug.
Any other users with D6633 on lollipop see this type of call screen?
Lolipop Update
Finally lollipop certified by PTCRB
Build Number : 23.1.1.E.0.1
I made this post to gather all Honor 6+ owners from KSA and UAE who bought it from souq (dot) com to share their problems, questions and experiences.
My experience is excellent with 6+. but when i upgraded it to lollipop, all gestures functions were gone!
No double tap to wake screen, no draw to open apps .. even all motion settings like flip mob to mute were disappeared
I used this file for upgrading:
hxxp://7961b64fc16ad15a92ef-9f98f1eddca1ebd26a80f4b64e8bd016.r62.cf3.rackcdn.com/downloads/PE-TL10C900B324.zip
(replace hxxp with http)
I downloaded it from here:
hxxp://hihonor.com/en/pages/support#?view=downloads
(replace hxxp with http)
I tried a factory reset, but it always fail at 10%
I can't call huawei support as i am outside of ksa now.
Any one faced the same problems when upgrading to lollipop?
not yet updated because of these problems. Can you check in gestures settings, if these features are still available? I purchased from Souq UAE
I tried flashing Latest 5.1.1 Chinese Stable Developer Edition , and then use downgrade package provided on Huawei Club Forum by chinese guys , but failed also.
Akram. said:
not yet updated because of these problems. Can you check in gestures settings, if these features are still available? I purchased from Souq UAE
Click to expand...
Click to collapse
No gestures options at all after upgrading. May you call customer support to ask them about this problem,and when the official upgrade for uae and ksa will be released?
I think that phones provided by souq.com have a modified software(i can't understand why )
So all of MENA region custmores have a buggy update.
We should contact with local provider & huawei to get our rights
any news about this dam update ?
http://forum.xda-developers.com/honor-6/general/huawei-honor-6-plus-tl10-b334-lollipop-t3278098
any one try this
zezo_ddd said:
http://forum.xda-developers.com/honor-6/general/huawei-honor-6-plus-tl10-b334-lollipop-t3278098
any one try this
Click to expand...
Click to collapse
Yes, and it is working like charm!
All problem were solved now.
anyone faces touch problems
with me sometimes areas in screen does't respond and after restart all things goes fine
zezo_ddd said:
anyone faces touch problems
with me sometimes areas in screen does't respond and after restart all things goes fine
Click to expand...
Click to collapse
yes! .. this happened with me for just one time at the top left corner of screen, but it did't repeate after restart until now.
PE-TL10
I have (6+) I bought it from (souq.com) and it was 4.4.4 b135 . I download a lot of update for lollypop and one of them woks but as any one whoa update to lollypop ((double touch, switch 4g button and drawing)) I lost them
my update is
5.1.1. (b310) <<<< from where I get it I don't know
i don't know what I do. i'm scare I lost it when I try to search for another update
AmeerAdel said:
yes! .. this happened with me for just one time at the top left corner of screen, but it did't repeate after restart until now.
Click to expand...
Click to collapse
PRNS777 said:
I have (6+) I bought it from (souq.com) and it was 4.4.4 b135 . I download a lot of update for lollypop and one of them woks but as any one whoa update to lollypop ((double touch, switch 4g button and drawing)) I lost them
my update is
5.1.1. (b310) <<<< from where I get it I don't know
i don't know what I do. i'm scare I lost it when I try to search for another update
Click to expand...
Click to collapse
Hi Guys,
Check out the Lollipop and Marshmallow update here
http://forum.xda-developers.com/honor-6/general/honor-6-heres-how-update-manually-to-t3323661
I bought my Honor 6+ from Souq.com UAE last month. As i'm residing in India and using Vodafone as my service provider but not able to access data internet (2G/3G/4G) in my phone (working fine with Wifi). It is displaying the 3G/4G symbol at the top but somehow its not working even after getting all the configuration done that is provided by Vodafone.
I tried with multiple service providers (Airtel/Reliance/Aircel/Idea) but its not working either, although the data net is working in another phone using the same SIM. Please help me , let me know if anyone else having the same issue.
I tried the B334 Russia, and it worked fine, but I bricked my phone after I tried to update to the marshmallow as per the following update link but I made one mistake that I did unzipped the 503 update.zip pachage and i only took the update.app file and put it on the dload folder, after that i was unable to boot my phone again,
http://forum.xda-developers.com/hono...ly-to-t3323661
and after several attempts to flash so many versions like (B130, B135, B300, B500, B503, B224, B334, B332, B510) I was able by the adb method to update to the latest Marshmallow update of UAE B510 but wifi and Bluetooth don't work anymore, and the mac address shows zeros 02:00:00:00:00 , ANY SUGGESTIONS?
in addition could someone told me the original firmware version that PE-TL10 in saudi comes with and where I can downloaded
So I've searched for a answer but nothing worked.
I have the ALE-L21 model, and it bootloop-ed when I was trying to root the phone.
I've tried to put an update from the sd card by pressing volume up and down + power button and it just said failed from the start.
I've tried entering fastboot mode and flashing boot.img, recovery.img, but i it didn't worked.
Sorry for the bad english, please help me.
first off all...
Whe need al little more information.
dual/single sim?
What build number are you on?
Did you unlock your bootloader? (i think that's your problem)
do you have a goldfish?
If you can answer these questions we can help you
Hi! I have same issue with my P8 Lite single sim from Vodafone. Before i went into bootloop i had B181 branded software.
My bootloader is locked (how i can get unlock code when emui site is down?). Is there any way to rescue my phone without unlocking bootloader?
Maybe it will be possible to flash (vol+,vol-,power) it once again with vodafone rom, but i can't find it anywhere.
Thanks for support.
benjiamin said:
Hi! I have same issue with my P8 Lite single sim from Vodafone. Before i went into bootloop i had B181 branded software.
My bootloader is locked (how i can get unlock code when emui site is down?). Is there any way to rescue my phone without unlocking bootloader?
Maybe it will be possible to flash (vol+,vol-,power) it once again with vodafone rom, but i can't find it anywhere.
Thanks for support.
Click to expand...
Click to collapse
Is the site down again?as far as i can tell it's online https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
you can't flash anything with bootlaoder locked. don't try it.
just unlock your boatloader after that's done come back
the first step is online but at next step i have "We're sorry but the server is busy.." since yesterday
benjiamin said:
the first step is online but at next step i have "We're sorry but the server is busy.." since yesterday
Click to expand...
Click to collapse
try this one http://huaweip8lite.blogspot.be/2016/03/bootloader-huawei-p8-lite-14-huawei.html
i don't know if it's works but its from one of our best developers Sokkoban
hint use google translate.
websit site is online again, bootloader unlocked what are next steps ?
Edit: ok i've used P8-lite multitool and phone is back but i do not have imei number and in software version i have "balongc50b311" how to fix it now?
benjiamin said:
websit site is online again, bootloader unlocked what are next steps ?
Edit: ok i've used P8-lite multitool and phone is back but i do not have imei number and in software version i have "balongc50b311" how to fix it now?
Click to expand...
Click to collapse
Oh you got the balong bug that's beautiful...
before i can give you antyhing i must know what version did you updated to?
Lordbannakaffalatta said:
Oh you got the balong bug that's beautiful...
before i can give you antyhing i must know what version did you updated to?
Click to expand...
Click to collapse
I'm not 100% sure now but it should be ALE-L21C432B133_Europe Channel_single Software from official huawei site
In that build there should be a floder named vendor with an small update.app in it. put that one in your sdcard/internal memory and go trough settings-> updater-> menu-> local update and select that. let it do and everything should be fine
Lordbannakaffalatta said:
In that build there should be a floder named vendor with an small update.app in it. put that one in your sdcard/internal memory and go trough settings-> updater-> menu-> local update and select that. let it do and everything should be fine
Click to expand...
Click to collapse
Everything works, thank you so much but it seems that this ROM is bit laggy and when I'm tryning to delete some ****ty games it's restarting and games remain.
Can i update it now to Android 6.0? Will it be possible via OTA? Right now i have info that my current version is latest one.
benjiamin said:
Everything works, thank you so much but it seems that this ROM is bit laggy and when I'm tryning to delete some ****ty games it's restarting and games remain.
Can i update it now to Android 6.0? Will it be possible via OTA? Right now i have info that my current version is latest one.
Click to expand...
Click to collapse
you have to update manually if you want MM i will post a link with descriptions once i uploaded that. (seriouslt i typed this like a 1000 times)
here you go http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994
Hi guys,
Tried using Mobile Upgrade Q 5..0.0 and it would not download the software , always stuck at 20/100 .
Tried Mobile Upgrade Q 5.1.8 and it works ! Download was super fast , less then 5 minutes and installed fine.
Just choose 6045 from the list .
Mobile Upgrade Q 5.1.8 download:
https://mega.nz/#!3N8SmaTC!Z4of6DL58tnKzJzYXCSO_hZ0UOMql2H13ZkATwvy8G8
What is your build number and android version I want to know
r_ramalho said:
Hi guys,
Tried using Mobile Upgrade Q 5..0.0 and it would not download the software , always stuck at 20/100 .
Tried Mobile Upgrade Q 5.1.8 and it works ! Download was super fast , less then 5 minutes and installed fine.
Just choose 6045 from the list .
Mobile Upgrade Q 5.1.8 download:
https://mega.nz/#!3N8SmaTC!Z4of6DL58tnKzJzYXCSO_hZ0UOMql2H13ZkATwvy8G8
Click to expand...
Click to collapse
I guess so as i did tried to reflash stock ROM with Mobile Upgrade Q 5.0.0 a few days ago, but it didn´t work. Then i used Mobile Upgrade Q 5.1.8 but it displayed that i had the latest software so no reflashing at all, i was incapable of reflashing and clearing the \system partition, for me it is a real problem as i was expecting to delete all the traces of SuperSU root, Xposed, etc; with the aim of moving to Magisk and keep passing safetynet. Anyone has any clue so that could help me reflashing latest stock MM ROM?
Use the Panasonic ELUGA to restore an then the Mobile Upgrade .
r_ramalho said:
Use the Panasonic ELUGA to restore an then the Mobile Upgrade .
Click to expand...
Click to collapse
Hello @r_ramalho is there a guide using both softwares?
https://forum.xda-developers.com/idol-3/help/bootloop-idol-3-6045y-t3365495
View that post , first recover using ELUGA Switch from the link in the post above , then after the phone boots , shutdown and use the Mobile Upgrade to restore the stock rom .
r_ramalho said:
https://forum.xda-developers.com/idol-3/help/bootloop-idol-3-6045y-t3365495
View that post , first recover using ELUGA Switch from the link in the post above , then after the phone boots , shutdown and use the Mobile Upgrade to restore the stock rom .
Click to expand...
Click to collapse
I was also considering downgrade to LP by performing a restore from my TWRP backup. May be easier and safer, as ELUGA modifies certain branded partitions, I guess... Any inconvenience related to that?
I have never got the mobile upgrade to work, not even this version, and that is a shame because here in Finland we have no OTA since lollipop, and I can not understand how the official MM-rom is nowhere to be found, even if the phone have the option of update from storage. If only I could find the update file, I presumably could update without any rooting or twrp or anything, and keep it factory fresh and under warranty?
bowtie81 said:
I have never got the mobile upgrade to work, not even this version, and that is a shame because here in Finland we have no OTA since lollipop, and I can not understand how the official MM-rom is nowhere to be found, even if the phone have the option of update from storage. If only I could find the update file, I presumably could update without any rooting or twrp or anything, and keep it factory fresh and under warranty?
Click to expand...
Click to collapse
I agree with you, that is a bad movement from Alcatel not to give access to ROM zip. It would be so easy to flash it via settings _ apply update from zip, as many devices do. Weeks ago I was desperate to find a stock zip for my 6045Y but no luck. It's a shame to let dye this music lover smartphone.
I have the stock MM rom if anybody wants it.
Bogdan28 said:
I have the stock MM rom if anybody wants it.
Click to expand...
Click to collapse
I'm very interested, did you get it from a TWRP backup or which method did you used?
Could you upload it?
Thanks in advance
ciclolars said:
I'm very interested, did you get it from a TWRP backup or which method did you used?
Could you upload it?
Thanks in advance
Click to expand...
Click to collapse
The roms are from murigny64, he made them. He has a thread here which I checked earlier. If you want the version without root the link is still good, only the rooted version was removed.
Bogdan28 said:
The roms are from murigny64, he made them. He has a thread here which I checked earlier. If you want the version without root the link is still good, only the rooted version was removed.
Click to expand...
Click to collapse
Thanks for the quick reply, i did a search and found the tread https://forum.xda-developers.com/idol-3/development/6045y-mm-6-0-1-firmware-european-idol3-t3435577 However, i have a more recient MM Stock ROMs with many fixes (in the version of this URL 2016/08/10 the MM ROMs has a bug that unables the phone to record call, am i wrong?).
I'm not sure what to do and even can´t update from the latest MM from a couple of days ago, https://forum.xda-developers.com/idol-3/help/ota-android-update-malware-t3736229 As Mobile Upgrade Q says that my 6045Y has the latest software, may be an update to only 6045I model?
ciclolars said:
Thanks for the quick reply, i did a search and found the tread https://forum.xda-developers.com/idol-3/development/6045y-mm-6-0-1-firmware-european-idol3-t3435577 However, i have a more recient MM Stock ROMs with many fixes (in the version of this URL 2016/08/10 the MM ROMs has a bug that unables the phone to record call, am i wrong?).
I'm not sure what to do and even can´t update from the latest MM from a couple of days ago, https://forum.xda-developers.com/idol-3/help/ota-android-update-malware-t3736229 As Mobile Upgrade Q says that my 6045Y has the latest software, may be an update to only 6045I model?
Click to expand...
Click to collapse
I don't know about the record call thing, I don't use it.
As for the second part I'm not sure I understand. You want the latest OTA update or you already have it
Bogdan28 said:
I don't know about the record call thing, I don't use it.
As for the second part I'm not sure I understand. You want the latest OTA update or you already have it
Click to expand...
Click to collapse
Sorry, i didn't explain myself properly. I mean, I have already the latest MM stock ROM dated from january of 2017, my device is a 6045Y. However, a few days ago there has been released an update, but my guess is that only for 6045I devices, so i don't have it and can´t reflash my Idol 3 with the same ROM i currently have.
PS:
I tried to flash via TWRP this zip https://forum.xda-developers.com/idol-3/development/6045y-mm-6-0-1-firmware-european-idol3-t3435577 and then use the Mobile Upgrade Q to get the latest MM stock, but Mobile Upgrade Q keeps saying "you have already the latest update" which this statement is not true after flashing this zip. Finally, I restored my TWRP backup so i'm in the same state as i began this morning, i'm tired of this policy of Alcatel that there is no official zip from stock firmwares, the only way is using an online tool thar refuses to reflash the same firmware.
I am from india, using 6045k, lost duel sim support due to flashing of marionette's Rom. Still trying to get duel sim back, tried eluga firmware also, but unfortunately i didn't get any error at 45%. Now i am using flyos 2.0, its working like charm. But only one sim is there, i tried several software upgrader versions, but server is not connecting, its always stuck at 20%.
Its been a year that i am trying to get to stock rom. I have done search in several threads and contacted some senior members but it didn't help,
Pls help me, how can i get back to stock rom and get duel sim Support back??
r_ramalho said:
Hi guys,
Tried using Mobile Upgrade Q 5..0.0 and it would not download the software , always stuck at 20/100 .
Tried Mobile Upgrade Q 5.1.8 and it works ! Download was super fast , less then 5 minutes and installed fine.
Just choose 6045 from the list .
Mobile Upgrade Q 5.1.8 download:
https://mega.nz/#!3N8SmaTC!Z4of6DL58tnKzJzYXCSO_hZ0UOMql2H13ZkATwvy8G8
Click to expand...
Click to collapse
Thank god, today I got my phone to stock rom, by using q5.1.8.
Actually, yesterday only i heard about q.5.1.8, its been a year that i was trying to do this. Appart from q5.1.8, i connected VPN to U. S. Now everything is fine.
I dont know which one helped me, that the q5.1.8 or the VPN. :laugh:
Thanks to all.
r_ramalho said:
Hi guys,
Tried using Mobile Upgrade Q 5..0.0 and it would not download the software , always stuck at 20/100 .
Tried Mobile Upgrade Q 5.1.8 and it works ! Download was super fast , less then 5 minutes and installed fine.
Just choose 6045 from the list .
Mobile Upgrade Q 5.1.8 download:
https://mega.nz/#!3N8SmaTC!Z4of6DL58tnKzJzYXCSO_hZ0UOMql2H13ZkATwvy8G8
Click to expand...
Click to collapse
Thanks! This helped fix a bricked phone.
i am looking for alcatel idol 3 4.7 stock rom. Build number 6039y
can anyone help me with it?
https://forum.xda-developers.com/idol-3/general/guide-restore-idol-3-to-factory-rom-t3769739 this may be what anyone is looking for.
Re-Share and help everyone else who's call ends issue on jio.
Actual Cause Detected: Baseband
Possible Addon Causes: ROM not supporting it.
So in case of Baseband( or you are not sure) please follow this steps:
Step1: You need to go back to stock rom again as baseband can only be updated by stock rom.
Go to this link https://forum.xda-developers.com/lenovo-zuk-z2/how-to/volte-problems-custom-roms-t3744291 read it understand it and thank him.
Step2: Missed the Step1?
> Get the *LATEST FIRMWARE(INDIA): https://forum.xda-developers.com/lenovo-zuk-z2/how-to/lenovo-z2-plus-stock-indian-firmware-t3693768
> Search ADB drivers for Zuk z2 plus and install
> Search QPST 2.7.4x for Zuk z2 plus and install
> Follow this guys steps https://www.youtube.com/watch?v=006cD3G1akk
> known issue which using QPST it might not work ... save the firmare somewhere which is not in nested folder.
> Step3: Reboot and you are back on stock.
> Step to confirm: Insert the sim, make a successful call else go to Network > Romining ON or something else like 4g network only etc, Restart if required but make sure you can call.
> Step4: Unlock bootloader and flash twrp
> https://www.youtube.com/watch?v=oIsXWkDIhuc this link will help only indian version
> Step5: Install the Custom Rom.
> Rom not working or stuck in bootloader. Go to the previous version or try other rom
> Blue Screen of Death? You are probably flashed old stock rom. If yes repeat 1-5 again(Yes i did it)
> Step 6: Thank everyone for their efforts and enjoy the awesomeness
#Request: Admin please pin it, hope it helps everyone.
sirusdas said:
Re-Share and help everyone else who's call ends issue on jio.
Actual Cause Detected: Baseband
Possible Addon Causes: ROM not supporting it.
So in case of Baseband( or you are not sure) please follow this steps:
Step1: You need to go back to stock rom again as baseband can only be updated by stock rom.
Go to this link https://forum.xda-developers.com/lenovo-zuk-z2/how-to/volte-problems-custom-roms-t3744291 read it understand it and thank him.
Step2: Missed the Step1?
> Get the *LATEST FIRMWARE(INDIA): https://forum.xda-developers.com/lenovo-zuk-z2/how-to/lenovo-z2-plus-stock-indian-firmware-t3693768
> Search ADB drivers for Zuk z2 plus and install
> Search QPST 2.7.4x for Zuk z2 plus and install
> Follow this guys steps https://www.youtube.com/watch?v=006cD3G1akk
> known issue which using QPST it might not work ... save the firmare somewhere which is not in nested folder.
> Step3: Reboot and you are back on stock.
> Step to confirm: Insert the sim, make a successful call else go to Network > Romining ON or something else like 4g network only etc, Restart if required but make sure you can call.
> Step4: Unlock bootloader and flash twrp
> https://www.youtube.com/watch?v=oIsXWkDIhuc this link will help only indian version
> Step5: Install the Custom Rom.
> Rom not working or stuck in bootloader. Go to the previous version or try other rom
> Blue Screen of Death? You are probably flashed old stock rom. If yes repeat 1-5 again(Yes i did it)
> Step 6: Thank everyone for their efforts and enjoy the awesomeness
#Request: Admin please pin it, hope it helps everyone.
Click to expand...
Click to collapse
you may have missed the info that baseband is beeing flashed through twrp since ages as well. I updated baseband only by flashing baseband.
The only issue where you need stock rom is to update bootloader.
But baseband can be flashed separately, no stock rom needed. Kindly check instructions on xda and zukfans.eu how to update baseband.
Anyway thanks for your effort to help people, highly appreciate it.
I did find it too. But its not available for INDIAN version as per my research.
weimerd said:
you may have missed the info that baseband is beeing flashed through twrp since ages as well. I updated baseband only by flashing baseband.
The only issue where you need stock rom is to update bootloader.
But baseband can be flashed separately, no stock rom needed. Kindly check instructions on xda and zukfans.eu how to update baseband.
Anyway thanks for your effort to help people, highly appreciate it.
Click to expand...
Click to collapse
The only link i got was...
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/baseband-radiomodem-z2-plus-twrp-t3749988
and it supports China Rom only.
there is other links like
https://androidfilehost.com/?fid=890129502657583465
but was not sure how a chinese baseband will respond on network etc. If anyone is trying i would love to know it too.
As far I know almost every one who has been using the phone since nougat custom ROMs have now updated the baseband and bootloader to zui 4.0.199 which is the latest baseband and bootloader.. so I don't see any need to further update baseband or bootloader as there has been no new release from device manufacturers.. this would be only going to stock and unlocking again..
I am not on Q yet so can't say if it's rom issue or baseband issue ..
it can't be baseband issue as it has been working till now on all ROMs .. the issue has come up recently in most forums .. I do keep going through forums .. so mostly volte is broken in latest build that's it.. that's seems to be fixed as well on the latest build released in telegram
Latest Baseband Version?
Hi,
If anyone is using Jio sim, can you pls tell me what is the latest baseband version your phone?
For me, the baseband that I see is "M8996FAAAANAZM-1.70664.3.76387.1"
VoLTE is visible and I can receive calls on my Jio, can even make calls to non-Jio numbers. I just can't make calls to another Jio no.
And so checking around.
CC: @sanjay.2704
mGforCe said:
Hi,
If anyone is using Jio sim, can you pls tell me what is the latest baseband version your phone?
For me, the baseband that I see is "M8996FAAAANAZM-1.70664.3.76387.1"
VoLTE is visible and I can receive calls on my Jio, can even make calls to non-Jio numbers. I just can't make calls to another Jio no.
And so checking around.
CC: @sanjay.2704
Click to expand...
Click to collapse
I have same problem but I fixed the problem
Just flash 2.5.104 St with qfill
Once boot zui put Jio sim make a call to another Jio
That's all ..
Now you can unlock bootloader and change any custom rom you want and enjoy volte calling
hari1jack said:
I have same problem but I fixed the problem
Just flash 2.5.104 St with qfill
Once boot zui put Jio sim make a call to another Jio
That's all ..
Now you can unlock bootloader and change any custom rom you want and enjoy volte calling
Click to expand...
Click to collapse
thanks for your feedback @hari1jack
In that case, your baseband version will be 1.76 ? Can you pls share the screenshot of the settings page?
mGforCe said:
thanks for your feedback @hari1jack
In that case, your baseband version will be 1.76 ? Can you pls share the screenshot of the settings page?
Click to expand...
Click to collapse
Take a look
hari1jack said:
Take a look
Click to expand...
Click to collapse
Ok, this is M8996FAAAANAZM-1.76387.1.92759.1 as is expected from ZUI 2.5.099ST India one.
What is surprising is that everyone had been asking in past that for Custom Pie roms one need to update baseband/firmware as per latest ZUI 4.0.199ST which effectively gives baseband v1.70
Let me try a few more tweaks and check before last resort of QPST flash.
mGforCe said:
Ok, this is M8996FAAAANAZM-1.76387.1.92759.1 as is expected from ZUI 2.5.099ST India one.
What is surprising is that everyone had been asking in past that for Custom Pie roms one need to update baseband/firmware as per latest ZUI 4.0.199ST which effectively gives baseband v1.70
Let me try a few more tweaks and check before last resort of QPST flash.
Click to expand...
Click to collapse
Ok let me know when you found any other way to fix this
hari1jack said:
Ok let me know when you found any other way to fix this
Click to expand...
Click to collapse
Sure!
Quick check : you learnt of this issue of jio to jio call not happening only in Pie roms?
Can you tell me which are the past 2-3 ROMs where you had no problem of calling? And when problem started?
mGforCe said:
Sure!
Quick check : you learnt of this issue of jio to jio call not happening only in Pie roms?
Can you tell me which are the past 2-3 ROMs where you had no problem of calling? And when problem started?
Click to expand...
Click to collapse
The truth is I don't have a Jio sim last 1 year
On that one year I switched many roms Oreo, pie,q
Suddenly while using my brotherjio number I couldn't make call to any Jio on evaluation x rom
That was the time when I know there is a issue
hari1jack said:
The truth is I don't have a Jio sim last 1 year
On that one year I switched many roms Oreo, pie,q
Suddenly while using my brotherjio number I couldn't make call to any Jio on evaluation x rom
That was the time when I know there is a issue
Click to expand...
Click to collapse
Ok, clear. Something similar to me !!
Download this latest version and follow the steps of this post.
Link: http://www.mediafire.com/file/f86cs94nt19762z/Lenovo_Zuk_Z2_Z2132_EN_OPEN_USER_Q01080.2_N_ZUI_2.5.104_ST_170418_QPST.zip
mGforCe said:
Hi,
If anyone is using Jio sim, can you pls tell me what is the latest baseband version your phone?
For me, the baseband that I see is "M8996FAAAANAZM-1.70664.3.76387.1"
VoLTE is visible and I can receive calls on my Jio, can even make calls to non-Jio numbers. I just can't make calls to another Jio no.
And so checking around.
CC: @sanjay.2704
Click to expand...
Click to collapse
Solved : Jio to Jio Call Ended
So after trying all options, none of which helped in solving Jio to Jio calls ended abruptly I flashed via QPST India ZUI 2.5 ROM and the issue is sorted. Thanks to all for their support.