Database Users

Change Model Number & Build Number After installing Android 6

Hello..
My friends after installing the ROM: GRA-UL10C636B320
The problem I have is my phone from GRA-UL10 to GRACE change!
How can I fix this??????
my phone model : GRA-UL10
Unlock Bootloader:good:

One thing not comment ?????
Please advise friends.

@Rashad83 @TopperBG

maxomid said:
@[email protected]
Click to expand...
Click to collapse
What issues are you facing with the rom?. If it's only stating "Grace" in the model section that's ok, you can change it back in build.prop if you are rooted but i don't think it's necessary. In fact if you check the build.prop by default in the model section it says Grace.

This is my build.prop.

It's same to me - my device is stated as GRACE, I don't know why. Look after build.prop but because I've seen it at many places there .... leaved it intact.

Rashad83 said:
What issues are you facing with the rom?. If it's only stating "Grace" in the model section that's ok, you can change it back in build.prop if you are rooted but i don't think it's necessary. In fact if you check the build.prop by default in the model section it says Grace.
Click to expand...
Click to collapse
thanks...
I got through the KingRoot attempted to root the phone but Bootloop my phone and Rescuse Mode ....
Finally, software that DC Phoenix and pay 15 euro phone and I fix this firmware: ( GRA-UL10C636B320) Flash I
But I realized after flash Model Number : GRA-UL10 has changer to GRACE
next problem is that the build number, firmware flash that I (with DC Phoenix) UL10C636B320, but right now Bild phone number : GRA-C900B320
This normal?

@Rashad83 @TopperBG

maxomid said:
thanks...
I got through the KingRoot attempted to root the phone but Bootloop my phone and Rescuse Mode ....
Finally, software that DC Phoenix and pay 15 euro phone and I fix this firmware: ( GRA-UL10C636B320) Flash I
But I realized after flash Model Number : GRA-UL10 has changer to GRACE
next problem is that the build number, firmware flash that I (with DC Phoenix) UL10C636B320, but right now Bild phone number : GRA-C900B320
This normal?
Click to expand...
Click to collapse
Yes it's normal, C900B320 is the same as C636B320 just name numbering difference. I think all the Asian Marshmallow roms are C900B320 for the dual sim version. I think the reason for the changes in your phone is because of your first failed attempt to unlock your bootloader might have corrupted your phone old info so you get the default values.
As long as your IMEI isn't corrupted that's the important thing and the phone is working fine don't worry. If you are still not comfortable with the changes, try to download a Marshmallow rom for your model from Huawei website and install it. See if things changes.

Not agree. First C900 is custom regional version. My was C432.for Europe (don't remember north or west Europe). That's not such.big.problem but.could be for next OTAs. And last, actual rom from GRA-L09 is MM B321. I'm lost about devices version of that guy, sorry....
Sent from my GRACE using Tapatalk

TopperBG said:
Not agree. First C900 is custom regional version. My was C432.for Europe (don't remember north or west Europe). That's not such.big.problem but.could be for next OTAs. And last, actual rom from GRA-L09 is MM B321. I'm lost about devices version of that guy, sorry....
Sent from my GRACE using Tapatalk
Click to expand...
Click to collapse
The numbering has changed after Marshmallow for all regions my previous lollipop version was C470B200 .. but now after upgrading to Marshmallow it's C636B320 and this numbering is for all south east Asia region (Indonesia, Thailand, Singapore and Malaysia......). If you check the build.prop the system version it says C900B320 and i am on C636B320.
Middle east region changed from C433 to C180.

That sounds logical. Thank you.
My is GRA-C900B321
Sent from my GRACE using Tapatalk

Rashad83 said:
Yes it's normal, C900B320 is the same as C636B320 just name numbering difference. I think all Marshmallow roms are C900B320 for the dual sim version. I think the reason for the changes in your phone is because of your first failed attempt to unlock your bootloader might have corrupted your phone old info so you get the default values.
As long as your IMEI isn't corrupted that's the important thing and the phone is working fine don't worry. If you are still not comfortable with the changes, try to download a Marshmallow rom for your model from Huawei website and install it. See if things changes.
Click to expand...
Click to collapse
yes my phone dual sim version....
Software DC Phoenix tried to flash the firmware is locked bootloader mode
Because my phone was Bootloop and did not have access to Product ID could not do anything else.
And after repair and flash the firmware and receive Product ID re-opened to the boot loader got through DC Unlocker
Do you need to replace the firmware is?

maxomid said:
yes my phone dual sim version....
Software DC Phoenix tried to flash the firmware is locked bootloader mode
Because my phone was Bootloop and did not have access to Product ID could not do anything else.
And after repair and flash the firmware and receive Product ID re-opened to the boot loader got through DC Unlocker
Do you need to replace the firmware is?
Click to expand...
Click to collapse
I don't think you need to, but if you want to try it's up to you.
Just make sure you have the stock recovery back if you changed it to Twrp. Then download your model Marshmallow rom from Huawei and flash it without using DC Unlocker.
Make sure if you want to go back to Lollipop you have to flash the transition package before going back to an old rom.

I have to change the firmware?
If yes, what should I install the firmware? (My phone's bootloader is unlocked)
HuaweiCloud previous firmware ... but this ROM does not have this feature!
@Rashad83 @TopperBG

Rashad83 said:
I don't think you need to, but if you want to try it's up to you.
Just make sure you have the stock recovery back if you changed it to Twrp. Then download your model Marshmallow rom from Huawei and flash it without using DC Unlocker.
Make sure if you want to go back to Lollipop you have to flash the transition package before going back to an old rom.
Click to expand...
Click to collapse
Before we break phone (by Kingroot), equipped with Android 6 ، Emotion 4 ، Build 320

maxomid said:
I have to change the firmware?
If yes, what should I install the firmware? (My phone's bootloader is unlocked)
HuaweiCloud previous firmware ... but this ROM does not have this feature!
@Rashad83 @TopperBG
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/development/huawei-p8-ul00-ul10-b320-marshmallow-t3349908
After you get the rom. unzip it and inside it there is a word file it will tell you how to install the rom or you can follow the instructions in the link i gave.
Dowload from the UL10 link.

Firmware that is now on my phone :
http://forum.xda-developers.com/android/development/huawei-p8-ul00-ul10-b320-marshmallow-t3349908

Rashad83 said:
http://forum.xda-developers.com/android/development/huawei-p8-ul00-ul10-b320-marshmallow-t3349908
After you get the rom. unzip it and inside it there is a word file it will tell you how to install the rom or you can follow the instructions in the link i gave.
Dowload from the UL10 link.
Click to expand...
Click to collapse
Thank you for your answers:good:
I'm firmware and when I moved dload to the SD-CARD via a button (Volume Up, Volume Down, Power)
After I installed 5% .. because it's his error I do not know ....
The bootloader is unlocked .. why?
@Rashad83 @TopperBG

maxomid said:
Thank you for your answers:good:
I'm firmware and when I moved dload to the SD-CARD via a button (Volume Up, Volume Down, Power)
After I installed 5% .. because it's his error I do not know ....
The bootloader is unlocked .. why?
@Rashad83 @TopperBG
Click to expand...
Click to collapse
Are you rooted, or do you have twrp?

No Updates at all

Hi all,
I just recently went back to complete stock, from CM, as I want to hand it over to a friend.
I successfully switched back to C432B160 last week.
But still not a single update does show up, though that build is from November 2016.
It always tells me, that there are no updates. I am aware that Updates will show up with Hisuite, but shouldn't the stock updater present updates, too?
(I am not even talking about Nougat)
I already successfully tried a factory reset.
The only idee I have, is that I now have a DS oeminfo on an originally SS phone.
Does anyone have an idee, what might be wrong?

fireburner-de said:
Hi all,
I just recently went back to complete stock, from CM, as I want to hand it over to a friend.
I successfully switched back to C432B160 last week.
But still not a single update does show up, though that build is from November 2016.
It always tells me, that there are no updates. I am aware that Updates will show up with Hisuite, but shouldn't the stock updater present updates, too?
(I am not even talking about Nougat)
I already successfully tried a factory reset.
The only idee I have, is that I now have a DS oeminfo on an originally SS phone.
Does anyone have an idee, what might be wrong?
Click to expand...
Click to collapse
well, if you have ds oeminfo while your phone is ss, try flashing ss oeminfo and then the stock rom again

mjz2cool said:
well, if you have ds oeminfo while your phone is ss, try flashing ss oeminfo and then the stock rom again
Click to expand...
Click to collapse
Well the phone was SS at the beginning, but now I have oeminfo for DS and Stock Rom for DS (B160)

I wiped all and completely new flashed B160.
I did not setup any account (Google, Huawei), but only connected the phone to my WIFI.
Still neither Update nor HiCare show any available updates.
Does this need a SIM Card to be in the phone? Are there any other precautions?
I have no idea why it behaves like this.
edit: both frp and bootloader are locked according to the Bootloader Menu
I might add 2 weeks ago when coming from CM, there were no updates in update menu but HiCare, so I went fo Nougat. Nougat did not work properly, so I went back to B160 in order to start again, but since then, I never saw any update in menu, nor HiCare.
Might Huawei block DS Roms for IMEIS of originally SS phones?

Push, maybe @k1ll3r8e has an answer for me?

fireburner-de said:
Push, maybe @k1ll3r8e has an answer for me?
Click to expand...
Click to collapse
Heyho,
sounds really wired...
-
Here is what u can try,
1) bring the device back to stock (unrooted, loader closed)
2) do a factory reset and also the cache clear which is offered in the stock recovery
-
Start the device, do a dummy setup (only wlan is needed) check if the device offers an update. If not, well, try to manually update from C432B160 to C432B210 and check the update app again.
About this issue, i'm not sure, but maybe Huawei have a "downlaod limit" for an IMEI, that u can only download the update for example 10 times or so... I don't know^^ - I can only say, my device "L31 - Single-SIM - T-Mobile" modded to C432B380 dual-SIM have no issues with updates... I got since B130 every update via the normal update app. - But i also know that the updates will be released in waves, i don't know how they exclude/include devices in such an wave. But maybe, u have an oeminfo from an device which wasn't in the "current wave list". - As already mentioned i don't know how they manage those waves or what the trigger is...
Hope i could help u a bit
Regards
Sebastian

fireburner-de said:
I wiped all and completely new flashed B160.
I did not setup any account (Google, Huawei), but only connected the phone to my WIFI.
Still neither Update nor HiCare show any available updates.
Does this need a SIM Card to be in the phone? Are there any other precautions?
I have no idea why it behaves like this.
edit: both frp and bootloader are locked according to the Bootloader Menu
I might add 2 weeks ago when coming from CM, there were no updates in update menu but HiCare, so I went fo Nougat. Nougat did not work properly, so I went back to B160 in order to start again, but since then, I never saw any update in menu, nor HiCare.
Might Huawei block DS Roms for IMEIS of originally SS phones?
Click to expand...
Click to collapse
So, did you try upgrade on N using Firmware finder?
If not, try it and you will see if your device in black list. I also use DS firmware for SS model and just last night I upgraded normaly from B160 to B370 Ota, and after that to B380 Ota.

@k1ll3r8e
Yes it already is a dummy setup. I will manually upgrade to B210 and try again, Thanks alot! @Alexxxx1
Firmware Finder is the Windows tool, isn't it? If above progress won't work I might boot my Windows partition and check on that.
Is there by chance any other way to check if the device is somehow blacklisted?
@all
Would Huawei push the updates to my device, if I would contact them? (I ask because of the altered oeminfo. Or would the refuse support in that case, which is what I guess)
edit: Does by chance anyone have a link to the C432B210 ROM?

fireburner-de said:
@k1ll3r8e
Yes it already is a dummy setup. I will manually upgrade to B210 and try again, Thanks alot! @Alexxxx1
Firmware Finder is the Windows tool, isn't it? If above progress won't work I might boot my Windows partition and check on that.
Is there by chance any other way to check if the device is somehow blacklisted?
@all
Would Huawei push the updates to my device, if I would contact them? (I ask because of the altered oeminfo. Or would the refuse support in that case, which is what I guess)
edit: Does by chance anyone have a link to the C432B210 ROM?
Click to expand...
Click to collapse
Heyho,
if u have an L31, go to my FTP (oeminfo) and go a few folders back, then u'll find a Huawei folder there are several versions stored.
Edit:
Here is the link (just back on my PC)
Regards,
Sebastian
Sent from my HUAWEI VNS-L31 using XDA Labs

Firmware finder is android app. You can find it in google play store as a free tool for upgrade huawei devices. In Ffinder you will find option for checking autorization of official firmware for your device, is it allowed or not for your device.
Regards

I did flash B210, but no Updates withiin 1 day. (I think time was to short)
I then flashed B370 Full-PV via Firmware Finder.
B380 should come automatically sometime, hopefully.
I think its time to hand it over to my friend now.
Only thing I am curious about is:
settings -> about phone -> certification: Serbia
I guess this is normal for C432?

Only thing I am curious about is:
settings -> about phone -> certification: Serbia
I guess this is normal for C432?
Click to expand...
Click to collapse
Yes, its normally for C432 if device was purchased in Serbia

Alexxxx1 said:
Yes, its normally for C432 if device was purchased in Serbia
Click to expand...
Click to collapse
It was bought from T-Mobile in Germany. But well.

fireburner-de said:
It was bought from T-Mobile in Germany. But well.
Click to expand...
Click to collapse
No worries about that
I bought mine also from T-Mobile DE, and mine shows also "Serbia"... I searched a bit for similar issues and it seems that also the P8 with C432 is for "Serbia" at least a unknown amount of it, sooo i think it comes from the "ROM" not from the device. Maybe they only certify the ROM for a "law based standart" to "Serbia". - Who knows...^^
Regards,
Sebastian

P8Lite ALE-L21 - Unlock Bootloader

I played with my P8Lite and I managed to f#ck the rom, so I decided that anyway is time to upgrade (I'm planning to go on AOSPA from here https://forum.xda-developers.com/p8lite/development/rom-t3649258 ).
Currently installed: Android 5.0.1 ALE-L211C432B190
What I did:
- downloaded and installed via dload method (b895_update.zip and B896_update.zip)
- now, in fastboot it says Phone Locked. Before, when it was running on previous rom, it was unlocked (i unlocked it).
Problem is that I can't seem to find the website where I can request a new code... the links I found here on xda seem to lead to a broken page.
This is rather urgent, so I'd appreciate any help.
Thanks a lot.
EDIT
For whoever has similar issue:
I contacted HUAWEI Support from here: https://consumer.huawei.com/en/contact-us/
To be safe, I wrote an email and used their Phone Support service. Service was surprisingly great and I got my unlocking number in less than 3 hours since I made my request.

Could you write what did you say to them?
And email address
Thanks

Urkel99 said:
Could you write what did you say to them?
And email address
Thanks
Click to expand...
Click to collapse
Forget that, that was in April and now they will not provide the unlock code anymore.
To unlock the ALE-L21 you will need to downgrade to android 5.0.0 and then try to root it in order to get the unlock code.

how to root after downgrade

help blocked at startup htc after update

Hello
I write because following an update yesterday htc u ultra my companion he does not want to start it is blocked on htc and becomes very hot!
I tried several things seen on xda but there I am completely blocked.
I have access to different things, booloader, recoverry, etc ... but nothing changes I did a factory reset but the problem does not evolve
I tried to flash it with a ROM ruu but he told me that it is not the good CID. taken here https://forum.xda-developers.com/u-...stock-htc-ultra-dual-sim-1-64-400-10-t3758077
after i have an idea but i do not know if this is possible i have access to someone who has the same phone bought at the same place at the same time is it possible to extract the RUU rom to reinject it into that of my wife ???
I am hopeless we leave in 8 days and my wife finds herself without phone can you m help me to find the good RUU or extract that of my friend to reinject it?
the model is this one https://www.eglobalcentral.fr/htc-u-ultra-64go-4g-dual-sim-desimlocke-blanc-fr.html
apparently it's a Taiwanese model double sim
thanks for all the help !!
PS it was all original not rooted nor bootloaded unlocked just the update ota do

It would be better if you post the threads links properly, yours got truncated.
If you have, as you claim, the Taiwanese Dual SIM model you should be able to follow the downgrade procedure from Oreo to Nougat. I did it multiple times.
You cannot extract RUU. It is specially prepared package that performs several upgrade operations separately. You can only make dump of already installed system but for that you do need an unlocked bootloader and custom recovery (TWRP) on both devices.

QDT said:
It would be better if you post the threads links properly, yours got truncated.
If you have, as you claim, the Taiwanese Dual SIM model you should be able to follow the downgrade procedure from Oreo to Nougat. I did it multiple times.
You cannot extract RUU. It is specially prepared package that performs several upgrade operations separately. You can only make dump of already installed system but for that you do need an unlocked bootloader and custom recovery (TWRP) on both devices.
Click to expand...
Click to collapse
sorry i corrected the links.
on the other hand I can do this procedure despite that I have access only to bootloader and recovery?
I'm not an expert I thought I can just flash with a RUU but I can not find one

bibou0007 said:
sorry i corrected the links.
on the other hand I can do this procedure despite that I have access only to bootloader and recovery?
I'm not an expert I thought I can just flash with a RUU but I can not find one
Click to expand...
Click to collapse
It seems to me you have got yourself a wrong RUU. The ones from the post are for India, not Taiwan.

Surely I can not get my hands on a Taiwanese RUU!
do you know where can I find a link?

bibou0007 said:
Surely I can not get my hands on a Taiwanese RUU!
do you know where can I find a link?
Click to expand...
Click to collapse
Here is one:
https://androidfilehost.com/?fid=962021903579498986

thank you very much I test his and come tell you!

it does not work it tells me that it's not the right version android I have to find an android 8
thank you

bibou0007 said:
it does not work it tells me that it's not the right version android I have to find an android 8
thank you
Click to expand...
Click to collapse
We don't have RUU 8.0. Try boot to download mode and flash TWRP recovery. Downgrade to Nougat (7.0).

VNS-L23 help please someone????

good day everyone,
Please forgive me for asking this about the VNS-L23. I know there are tons on similar issues on the forum, I've been reading but non specific to my model. I also know that some of the solutions may work on the VNS-L23 variant as well but, I'm swamped and a bit confused. Can someone please assist in helping me restore the VNS-L23 back to stock OR the latest OS/firmware that is available?
I tried flashing a Nougat firmware, flash was successful but, when phone rebooted it would not go past the Huawei eRecovery, no matter what i try.
I tried flashing other VNS-L23 firmwares via 3 button method...no success
I tried 'Download latest version and recovery'...no success
I am able to get into Fastboot mode.
I tried to flash TWRP...i was unsuccessful (ADB did recognize device).....on FASTBOOT screen i see Phone: Locked FRP: unlocked...failed...command not allowed (i think)
I tried to use DC unlock-er to make some headway, of course i have to make a purchase costing 15 pounds. I always support these things but, i do not want to purchase and it still does not work.
According to DC unocker's detection:
Firmware: VNS-L23C605B120
FB LockState: Locked
USER LockState: Locked
You guys are awesome here and i know I'll get back my device to work....Please, I just bought it, not even 2 days and i cant even use it now because of this issue.
Many thanks in advance....Ronald

Is this the 2016 or 2017 model?

2016

Use the dload method to restore stock firmware (use a external sdcard for this) then you will be able to unlock bootloader flash twrp and whatever u want ect...ect... If you have no idea what I'm on about just reply or priv msg me.

Exiatron00 said:
Use the dload method to restore stock firmware (use a external sdcard for this) then you will be able to unlock bootloader flash twrp and whatever u want ect...ect... If you have no idea what I'm on about just reply or priv msg me.[/QUOTE
thank you....I've tried that too, with many firmwares.. all has failed. Even if it says VNS-L23, still it fails. I have a firmware now that was paid for, I tried the forced update and it keeps saying package not found.
can you assist me please?
if you have telegram we can converse better there...+18683527996
Click to expand...
Click to collapse

Exiatron00 said:
Use the dload method to restore stock firmware (use a external sdcard for this) then you will be able to unlock bootloader flash twrp and whatever u want ect...ect... If you have no idea what I'm on about just reply or priv msg me.
Click to expand...
Click to collapse
wich files did you use?

@grymmy @arturohergo
Hey guys did you solve your issues ?
Tell me if not, maybe i can help.
Cheers

Dadditz said:
@grymmy @arturohergo
Hey guys did you solve your issues ?
Tell me if not, maybe i can help.
Cheers
Click to expand...
Click to collapse
I just wanna known wich files i have to use for make a rollback

Guys...I tried and tried and tried. Was most frustrating so I resorted to someone from Pakistan with software and programs to bring my P9 lite back to life. If you guys want I can put you on to the person. Or, if we can sort it out here then better because, of course it comes with a small fee to restore my device back to normal but I was desperate. I will say though, I didn't regretted it.

arturohergo said:
I just wanna known wich files i have to use for make a rollback
Click to expand...
Click to collapse
Hi dude, ok, if you tell device version and exact stock firmware
a little possibility to find some rollback package still exist.
But what are exactly your issue ?
Maybe you don't need rollback files...
Can you boot to system ?
Cheers

Dadditz said:
Hi dude, ok, if you tell device version and exact stock firmware
a little possibility to find some rollback package still exist.
But what are exactly your issue ?
Maybe you don't need rollback files...
Can you boot to system ?
Cheers
Click to expand...
Click to collapse
My version is vns-L23C212B336
I have two problems:
1. When I'm on horizontal (for example whatching a vodeo in YouTube, or playing in a game) the screen rotates itself, and the comeback, even when the autorotate is off.
2. When I'm going to type something the keyboard hides itself and I have to open it again.
And that's all, I hope you can help me.
By the way, I have tried to make a factory reset but it didn't work.

arturohergo said:
I just wanna known wich files i have to use for make a rollback
Click to expand...
Click to collapse
Well, looking onto the UNIFIED HELP THREAD, in post #6
there is "UNBRICKING AND DOWNGRADING FROM EMUI 5" section.
Here are some rollback packages but not for L23...
You need that package and need the full ota L23C212B130 firmware
from which extract update.app.
I don't know how to grab those files. I've searched with
Firmware Finder but B130 full ota isn't there...
So, go to next step...
arturohergo said:
My version is vns-L23C212B336
I have two problems:
1. When I'm on horizontal (for example whatching a vodeo in YouTube, or playing in a game) the screen rotates itself, and the comeback, even when the autorotate is off.
2. When I'm going to type something the keyboard hides itself and I have to open it again.
And that's all, I hope you can help me.
By the way, I have tried to make a factory reset but it didn't work.
Click to expand...
Click to collapse
B336 seems to be the latest firmware and no update are available.
If you want play a bit with your device you should consider
a rebrand but it is a bit difficult to find correct L23oeminfo file and firmware.
Maybe it can be converted to L21 or L31 version but never tried, i won't risk..
Some payed services should exist to assist you...
That's all dude, feel free to ask.
Cheers
edit: modified the link to UHT thread.

well, i think i will resign.
Thanks for your help anyway.

grymmy said:
Guys...I tried and tried and tried. Was most frustrating so I resorted to someone from Pakistan with software and programs to bring my P9 lite back to life. If you guys want I can put you on to the person. Or, if we can sort it out here then better because, of course it comes with a small fee to restore my device back to normal but I was desperate. I will say though, I didn't regretted it.
Click to expand...
Click to collapse
Hi, I have the same problem with my Vns l23, could you tell me what firmware did you use to fix it?