Database Users

SM-G9208 root on 5.1.1

After a whole week of searching and tripping knox i finally done it:
SM-G9208 root
After using CROM service and unlocking the CROM using ODIN to flash the attached file.
The source is this:
http://apk.tw/thread-704730-1-1.html
http://pan.baidu.com/s/1ntu1gjn
No credit to me
Here is my uploaded copy:
http://farzad.devbro.com/SM-9208_root_0902.tar

Dude, you saved my life
Was about to sell my s6 when I saw this man. Thank you so much
Edit: By any chance can you reupload the file here? Takes so long to download because it throttles at 25 kbps for me :/
Edit 2: Nvm got it to download fast haha FINALLY ROOT ACCESS!!

u root without tripping knox ?

ham4ever said:
u root without tripping knox ?
Click to expand...
Click to collapse
My knox was tripped before hand. Not sure if it does or not.

JoeCatarata said:
Was about to sell my s6 when I saw this man. Thank you so much
Edit: By any chance can you reupload the file here? Takes so long to download because it throttles at 25 kbps for me :/
Edit 2: Nvm got it to download fast haha FINALLY ROOT ACCESS!!
Click to expand...
Click to collapse
What is your Knox status?

Is it also for g920f with coh2? Knox?

devbro said:
What is your Knox status?
Click to expand...
Click to collapse
Don't really know how to check lol haha

JoeCatarata said:
Don't really know how to check lol haha
Click to expand...
Click to collapse
my knox is tripped.

After following this method I get a bootloop, any idea why and how to correct it?, already tried a factory reset but it doesn´t work, I had to flash stock rom again.
Edit: It happens because I upgraded to the latest 5.1.1 version available last week:
Model SM-G9208
Model name GALAXY S6
Country Taiwan
Version Android 5.1.1
Changelist 5683207
Build date Tue, 06 Oct 2015 11:54:52 +0000
Product code BRI
PDA G9208ZTU2COJ2
CSC G9208ZZT2COJ2
So if you get the update alert in your phone DON´T do it, there is no known way to ROOT this new version.
It was not possible to install a previous 5.1.1 version either (G9208ZTU1BOH2), when I try to flash it with ODIN, the phone just displays an error message “SW REV CHECK FAIL DEVICE 2 BINARY 1”.
Any Ideas are appreciated.
EDIT:
Finally rooted with xiao1u root method!

devbro said:
After a whole week of searching and tripping knox i finally done it:
SM-G9208 root
After using CROM service and unlocking the CROM using ODIN to flash the attached file.
The source is this:
http://apk.tw/thread-704730-1-1.html
http://pan.baidu.com/s/1ntu1gjn
No credit to me
Here is my uploaded copy:
http://farzad.devbro.com/SM-9208_root_0902.tar
Click to expand...
Click to collapse
Root works perfectly, but has anybody got TWRP working on 5.1? I've always had unusable touchscreen issues on it so stayed back on 5.0.2 until somebody devs a working build.

Dissmeister said:
Root works perfectly, but has anybody got TWRP working on 5.1? I've always had unusable touchscreen issues on it so stayed back on 5.0.2 until somebody devs a working build.
Click to expand...
Click to collapse
no go. i used the TWRP app to flash all new files.

devbro said:
no go. i used the TWRP app to flash all new files.
Click to expand...
Click to collapse
So your twrp works perfectly on 5.1 base? If so, could you share it with me?
I've been looking for a twrp that worked on 5.1 without the touchscreen not working. Thanks man

Definitely no luck rooting my phone,
Product code BRI
PDA G9208ZTU2COJ2
CSC G9208ZZT2COJ2
The file on first post didn´t work, and 3 days after I rooted (and everything was working perfectly) using this file:
http://pan.baidu.com/wap/album/file...26914354&fsid=128909912720545&adapt=pc&fr=ftw
I get the following error message every time i need root access:
"There is no SU binary installed, and SuperSU cannot install it. This is problem! If you upgraded to Android 5.0, you will need to manually re-root - consult the relevant forums for your device!"
If the phone is restarted or turned off after getting this error message the phone is death, it doesn´t start again.
I tried reflashing the root file, but it didn´t work.
I had to reinstall the stock ROM agan, and waiting for any effective root method for 5.1.1 OJ2 ROM.

0ptimus82 said:
After following this method I get a bootloop, any idea why and how to correct it?, already tried a factory reset but it doesn´t work, I had to flash stock rom again.
Edit: It happens because I upgraded to the latest 5.1.1 version available last week:
Model SM-G9208
Model name GALAXY S6
Country Taiwan
Version Android 5.1.1
Changelist 5683207
Build date Tue, 06 Oct 2015 11:54:52 +0000
Product code BRI
PDA G9208ZTU2COJ2
CSC G9208ZZT2COJ2
So if you get the update alert in your phone DON´T do it, there is no known way to ROOT this new version.
It was not possible to install a previous 5.1.1 version either (G9208ZTU1BOH2), when I try to flash it with ODIN, the phone just displays an error message “SW REV CHECK FAIL DEVICE 2 BINARY 1”.
Any Ideas are appreciated.
EDIT:
Finally rooted with xiao1u root method!
Click to expand...
Click to collapse
Hey, the same thing happened to me, I was stupid enough to not read this before. I tried the xiao1u method and it works, but it breaks mobile data. Did you get that issue?

Dissmeister said:
Hey, the same thing happened to me, I was stupid enough to not read this before. I tried the xiao1u method and it works, but it breaks mobile data. Did you get that issue?
Click to expand...
Click to collapse
Not in my case, my data was working perfectly, but problems started to show up 3 days after I rooted it, in the end it didn´t start again.
I haven´t found any other way to root this build yet and I´m still looking for a custom rom with no success.
If you want to give another try to xiao1u file try to disable the setting for "allow Google to regularly check device activity for security problems or warn about potential harm" after a clean ROM install, you can do it going to the GOOGLE SETTINGS app > SECURITY > VERIFY APPS & uncheck Scan For Security Threats.
Please keep us updated, I´ll post if I find any way to solve it.

0ptimus82 said:
Not in my case, my data was working perfectly, but problems started to show up 3 days after I rooted it, in the end it didn´t start again.
I haven´t found any other way to root this build yet and I´m still looking for a custom rom with no success.
If you want to give another try to xiao1u file try to disable the setting for "allow Google to regularly check device activity for security problems or warn about potential harm" after a clean ROM install, you can do it going to the GOOGLE SETTINGS app > SECURITY > VERIFY APPS & uncheck Scan For Security Threats.
Please keep us updated, I´ll post if I find any way to solve it.
Click to expand...
Click to collapse
Ok you may know this already but I'll post just to let you everybody else know.
DONT UPDATE TO THE LATEST 5.1 OTA. It adds rollback protection to your bootloader, which makes it impossible for you to odin to another build, unless its the same or a future update.
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/psa-odin-5-1-1-t3136151
As for our case, mate, I tried everything so far, the root method given by the OP bootloops on the latest OTA (previous 5.1 firmware on Sammobile is fine) and xiao1u method breaks mobile data for me although root does work perfectly. Funny thing is that if you tried the root by the OP and it got bricked, flashing the xiao1u method on top of it will get it working again, because its just the boot partition.
Atm, I just got sick of Samsung and their cr*p, had the same issues with my old Galaxy S4 with their Exynos. Got the Nexus 6P today and absolutely loving it.
I'll try to work it out sometime soon, if I do manage to get it working (mobile data for me) I'll post the fix here. This device is next to DOA for us as we've just got a couple of few blessed asian devs on it (all thanks to them). Unfortunately it may never be enough. I never got the issue you had, though it was just for last night, can you get into download mode? If so, odin the same firmware again. I used the 5.1 OTA on Sammobile, Taiwan. This is only for us who are already stuck in the new bootloader. You wont have root but at least your phone will work.
Cheers mate, all the best. Will update if I find a fix.

Dissmeister said:
Ok you may know this already but I'll post just to let you everybody else know.
DONT UPDATE TO THE LATEST 5.1 OTA. It adds rollback protection to your bootloader, which makes it impossible for you to odin to another build, unless its the same or a future update.
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/psa-odin-5-1-1-t3136151
As for our case, mate, I tried everything so far, the root method given by the OP bootloops on the latest OTA (previous 5.1 firmware on Sammobile is fine) and xiao1u method breaks mobile data for me although root does work perfectly. Funny thing is that if you tried the root by the OP and it got bricked, flashing the xiao1u method on top of it will get it working again, because its just the boot partition.
Atm, I just got sick of Samsung and their cr*p, had the same issues with my old Galaxy S4 with their Exynos. Got the Nexus 6P today and absolutely loving it.
I'll try to work it out sometime soon, if I do manage to get it working (mobile data for me) I'll post the fix here. This device is next to DOA for us as we've just got a couple of few blessed asian devs on it (all thanks to them). Unfortunately it may never be enough. I never got the issue you had, though it was just for last night, can you get into download mode? If so, odin the same firmware again. I used the 5.1 OTA on Sammobile, Taiwan. This is only for us who are already stuck in the new bootloader. You wont have root but at least your phone will work.
Cheers mate, all the best. Will update if I find a fix.
Click to expand...
Click to collapse
The results of my attempt to root is not very consistent or stable since 5.02 to 5.1.1 on different updates of the Taiwan variant (G9208).
Since first 5.1.1 update, I used xiaolu method and succeed for few days, I don't know what do you mean " xiao1u method breaks mobile data", my 4G signal was fine. With xposed hooked, I also observed the much more boot time of previous rooted phone, sometimes a smaller bootloop (3 or 4 repeated loops).
But after a very recent "samsung security policy update", the root has "gone" an re-root became impossible no matter by xiaolu's or chainfire UPDATE-SuperSU-v2.46, most time they will cause bootloop and I can use odin to get back to initial status. Does that mean I don't have hope to root again?

Dissmeister said:
So your twrp works perfectly on 5.1 base? If so, could you share it with me?
I've been looking for a twrp that worked on 5.1 without the touchscreen not working. Thanks man
Click to expand...
Click to collapse
This works on my Taiwan variant G9208 on stock 5.1.1,
Go on TWRP repository of dl.twrp.me/zeroflte, seek two .tar files as below and inject them stepwisely with different method
1st (Odin via USB). Twrp-2.8.7.2-zeroflte.img.tar
2nd(use that TWRP -2.8.7.2, operate via an "OTG linked usb mouse" since touch not working...) . to flash Twrp-2.8.7.0-zerofltespr.img (but it's actually 2.8.7.1)
now you have a touchable TWRP.
But I can't get root now, even with xiaolu method, any one with luck, please note me

ttyy121 said:
The results of my attempt to root is not very consistent or stable since 5.02 to 5.1.1 on different updates of the Taiwan variant (G9208).
Since first 5.1.1 update, I used xiaolu method and succeed for few days, I don't know what do you mean " xiao1u method breaks mobile data", my 4G signal was fine. With xposed hooked, I also observed the much more boot time of previous rooted phone, sometimes a smaller bootloop (3 or 4 repeated loops).
But after a very recent "samsung security policy update", the root has "gone" an re-root became impossible no matter by xiaolu's or chainfire UPDATE-SuperSU-v2.46, most time they will cause bootloop and I can use odin to get back to initial status. Does that mean I don't have hope to root again?
Click to expand...
Click to collapse
It happened the same way with my phone, no hope so far.
Has anybody tried arter97 kernel?, G9208 support was added in the last beta but the problem is OJ2 particular release.
http://forum.xda-developers.com/showpost.php?p=63345352&postcount=2080

What is possible with this model?

China rom + Europe rom

Now I using China rom b370, overall performance is good.
Camera have more options such as time lapse, object recognition, and online translation.
Phone manager have permission manager and virus scanner
Fingerprint is faster
Ability to download video from any app such as Tumblr
And lots more.
Disadvantages,
no ability to lock signal, sometime crashes, charging slow ( some say new update fix it)
How to install?
Simply download any China marshmallows rom, extract the ' system' and 'boot' file using 'huawei update extractor'
Flash it using Fastboot
First boot take longer time.
After that Install the downloaded rom using normal update method ( folder dload)
Rom can be obtain from 4pda forum ( Russian)
.......................................................................................
MY question is it possible to get China rom features into Europe rom?? ? ?

What model do you have?
Didn't you debrand your phone to a China model? If so, to which model?

I installed B380 yesterday but protected apps function doesn't work. I enabled it for Whatsapp but when I clear the background apps, Whatsapp going also. To get notifications, I had to open Whatsapp again and you should never close it. Then I went back to new B220 rom, same thing happened again. After that debranded to PLK-L01 again and I am using B180 right now, everything works fine. Unstable Marshmallow is killing me. I will not update until a stable firmware come up.
I have a B371 update notification right now but it's not useful too.
But except this issue, Chinese firmwares are really good and clean. Even there are no Google Apps. I installed manually GAPPS Pico version.

zinko_pt said:
What model do you have?
Didn't you debrand your phone to a China model? If so, to which model?
Click to expand...
Click to collapse
First I'm using Malaysia set, then go to Europe version, now China version.
I only push the ROM using Fastboot

memht said:
I installed B380 yesterday but protected apps function doesn't work. I enabled it for Whatsapp but when I clear the background apps, Whatsapp going also. To get notifications, I had to open Whatsapp again and you should never close it. Then I went back to new B220 rom, same thing happened again. After that debranded to PLK-L01 again and I am using B180 right now, everything works fine. Unstable Marshmallow is killing me. I will not update until a stable firmware come up.
I have a B371 update notification right now but it's not useful too.
But except this issue, Chinese firmwares are really good and clean. Even there are no Google Apps. I installed manually GAPPS Pico version.
Click to expand...
Click to collapse
Yeah I'm also has the issue with protected app. I will install a custom rom ' kangvip' , hope it will fix the issues.
By the way, how did you get the update, I didn't get any update to b380.
Did u using wifi to check for update?

AHMD92 said:
Yeah I'm also has the issue with protected app. I will install a custom rom ' kangvip' , hope it will fix the issues.
By the way, how did you get the update, I didn't get any update to b380.
Did u using wifi to check for update?
Click to expand...
Click to collapse
First, I debranded to PLK-TL01H from PLK-L01. And I installed B380 Full OTA directly via dload way.
Debranding is not necessary always but it's better when the phone version is fully compatible with firmware.
And you cannot get any update if you do not do debrand thing.

memht said:
First, I debranded to PLK-TL01H from PLK-L01. And I installed B380 Full OTA directly via dload way.
Debranding is not necessary always but it's better when the phone version is fully compatible with firmware.
And you cannot get any update if you do not do debrand thing.
Click to expand...
Click to collapse
yeah , i think you right . so how did you debranding ?
Is it,install lolipop rom, debrand ( changed build version to b100) and full ota ?
now im using b380 Kangvip custom rom , everything ok i guess, fingerprint lots faster and plus more features .

AHMD92 said:
yeah , i think you right . so how did you debranding ?
Is it,install lolipop rom, debrand ( changed build version to b100) and full ota ?
now im using b380 Kangvip custom rom , everything ok i guess, fingerprint lots faster and plus more features .
Click to expand...
Click to collapse
Hi, try to debrand with the Multitool
Because, i think, i you flash another Rom with a different cust you won't have the ota's

Kikito94 said:
Hi, try to debrand with the Multitool
Because, i think, i you flash another Rom with a different cust you won't have the ota's
Click to expand...
Click to collapse
I always wondering what is the use of the ' Cust' . And I never flash it. Tq man. I try it next time. Now I'm happy with this China rom except it don't have the ability to lock signal ?.

AHMD92 said:
I always wondering what is the use of the ' Cust' . And I never flash it. Tq man. I try it next time. Now I'm happy with this China rom except it don't have the ability to lock signal ?.
Click to expand...
Click to collapse
Hi again,
The cust is specific for each region ( at least i think it's this )
You have the C432BXXX ( C432 means Europe, so you'll have the update for european device )
That's why i think you can install a different Rom, but whitout the ota's
And finaly, debrand the phone put the cust of your choice and allow you to receive the ota's
I wish you good luck

Kikito94 said:
Hi again,
The cust is specific for each region ( at least i think it's this )
You have the C432BXXX ( C432 means Europe, so you'll have the update for european device )
That's why if think you can install ?* different Rom, but whitout the ota's
And finaly, debrand the phone put the cust of your choice and allow you to receive the ota's
I wish you good luck
Click to expand...
Click to collapse
OK tq bro. Hehe

AHMD92 said:
.......................................................................................
MY question is it possible to get China rom features into Europe rom?? ? ?
Click to expand...
Click to collapse
For your main question, i don't think so, what i know is, on MM you can add some lignes in the build.prop to add functionality ,but i'm afraid that all of you want is in the update,maybe there is a way, but i'm just a phone user ^^
It's just based on my searches

Kikito94 said:
For your main question, i don't think so, what i know is, on MM you can add some lignes in the build.prop to add functionality ,but i'm afraid that all of you want is in the update,maybe there is a way, but i'm just a phone user ^^
It's just based on my searches
Click to expand...
Click to collapse
This china has great feature, such a loss that huawei decided to not included china rom feature into european .

AHMD92 said:
This china has great feature, such a loss that huawei decided to not included china rom feature into european .
Click to expand...
Click to collapse
All i want to see in a near ota hehe.
Well, that already they've removed the "back with fingerprint"...
The important one for me, i don't use anymore my navbar with this function.. they've replace it by swipe left/right for pictures in MM...

Kikito94 said:
All i want to see in a near ota hehe.
Well, that already they've removed the "back with fingerprint"...
The important one for me, i don't use anymore my navbar with this function.. they've replace it by swipe left/right for pictures in MM...
Click to expand...
Click to collapse
Even China rom don't have that features. It might be available on emui 4.1

Kikito94 said:
Hi again,
The cust is specific for each region ( at least i think it's this )
You have the C432BXXX ( C432 means Europe, so you'll have the update for european device )
That's why i think you can install a different Rom, but whitout the ota's
And finaly, debrand the phone put the cust of your choice and allow you to receive the ota's
I wish you good luck
Click to expand...
Click to collapse
i already push the system , boot, and cust using fastboot,
and then I instal full rom b190 to make it stable
after that I debrand using multitool, everything already done .
but still dont get any ota update. I try to flash the b190 china rom and check for update again,
still no luck .
did I miss something ??

AHMD92 said:
i already push the system , boot, and cust using fastboot,
and then I instal full rom b190 to make it stable
after that I debrand using multitool, everything already done .
but still dont get any ota update. I try to flash the b190 china rom and check for update again,
still no luck .
did I miss something ??
Click to expand...
Click to collapse
Hi,
Well, i've never used the Multitool to debrand, but After installation of your Rom, have you made a hardreset ? ( Before trying debrand )
And have you got a custom recovery ? ( to receive ota, recovery stock is required )

AHMD92 said:
i already push the system , boot, and cust using fastboot,
and then I instal full rom b190 to make it stable
after that I debrand using multitool, everything already done .
but still dont get any ota update. I try to flash the b190 china rom and check for update again,
still no luck .
did I miss something ??
Click to expand...
Click to collapse
You can't get OTA update quickly. This may take a while. And you don't have to wait, just download B380 and install it.

memht said:
You can't get OTA update quickly. This may take a while. And you don't have to wait, just download B380 and install it.
Click to expand...
Click to collapse
So I have to wait for few days ?
Did you updating using wifi connection. I check the update using data connection.

LineageOS 14.1 Q&A

XDA:DevDB Information
LineageOS 14.1 Q&A, ROM for the Samsung Galaxy Note 4
Contributors
jef_00, _mone, ripee
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Created 2017-04-22
Last Updated 2017-04-22

Just flashed "lineage-14.1-20170227-UNOFFICIAL-trltetmo.zip" on my N910T, already installed root via TWRP, and restored my apps with TitaniumBU, and my phone keeps flashing error messages like: "com.android.phone has stopped" or "android.process.media keeps stoping", what can I do?
P.S. I come from a Note 7 6.0.1. ported rom, if that helps

Juan_Jaime98 said:
Just flashed "lineage-14.1-20170227-UNOFFICIAL-trltetmo.zip" on my N910T, already installed root via TWRP, and restored my apps with TitaniumBU, and my phone keeps flashing error messages like: "com.android.phone has stopped" or "android.process.media keeps stoping", what can I do?
P.S. I come from a Note 7 6.0.1. ported rom, if that helps
Click to expand...
Click to collapse
WipeTelephonyProviderData.zip
Flash this in TWRP.

First, thanks tremendously guys for all this hard work you do for us so we can have the latest and greatest Android system.
Okay, so on to my issue. Last night I flashed cm-14.1-20161204-UNOFFICIAL-treltexx over my N910CXXS2DQB3_N910COLB2DPE3_THL sammobile stock, and as so many have posted, it looks quite nice, but the No SIM error is too big of an issue to use on my only device. This, of course, put me into many hours researching if there has been a fix to which I have found nothing definitive. As a decades-long user of XDA I came across this post showing trltetmo.zip (T-Mobile) Snapdragon, and the treltexx (Exynos) version by jef_00. Following the posted instructions to the letter, TWRP continues to return the error "this device is treltexx but the ROM is treltexx,tredl" and stops dead with error 1. As I live in Asia, we only get the Exynos Octa-core mobiles here, so every ROM update/change I've made represents the difference between the Americas and pretty much the rest of the world, so I know the correct Exynos ROM was used last night, and it pretty much ran for many hours giving only the No SIM issue. It did turn to molasses trying to get anything to do something, but I figured I'd work that part out in time.
So now I'm using ODIN to put sammobile's latest stock release N910CXXU2DQC2_N910COLB2DPE3_N910CXXU1DPE3_HOME.tar, then root it with TWRP as I've done for many years and will try jef_00's latest release lineage-14.1-20170507-UNOFFICIAL-trltexx in hopes it will recognize the Exynos version once again. If it does, I'll then use the Bootloader/Modem combo Bootloader+Modem_N910CXXS2DQA1_6.0.1 to see if it will recognize my SIM card and allow me to use my mobile phone again.
Have any of you noticed either your Snapdragon or Exynos recognizing the ROMs incorrectly? Additionally, did/does this Bootloader/Modem combo fix the SIM issue?
Thanks for anything you can tell me.
Regards,
Cole

Does anyone know of a sound mod that works well with this ROM? Every one that I flash either has no effect or stops people from being able to hear me on a phone call.

no way of getting magisk to work for snapchat access ?

Hi everybody !
I've got a N910F and flash the 20170605 version by ripee. Baseband : N910FXXS1DQD1
I'm coming from Samsung stock version.
I connect my phone to my car (Peugeot 208) via Bluetooth. My car doesn't display titles of song from Deezer or YouTube anymore.
It display just the name of the phone.
Does anyone have the same issue ? (streaming is working)

Is there a rom for Lineage OS for my canadian note 4? (trltecan)

LedHendrix said:
Is there a rom for Lineage OS for my canadian note 4? (trltecan)
Click to expand...
Click to collapse
trltetmo, link in my signature.

ripee said:
trltetmo, link in my signature.
Click to expand...
Click to collapse
So flashing the Tmo version lets me use my phone regularly? Do I need to do anything else?

LedHendrix said:
So flashing the Tmo version lets me use my phone regularly? Do I need to do anything else?
Click to expand...
Click to collapse
Flash gapps and the latest W8 bootloader and modem in my signature, for best signal stability. You can change trltetmo to trltecan in the build.prop if you want your apps to think your phone is in fact the W8 not the T, but it's hardly important.

Vortell said:
What does creeper aroma extras do? Does it work with 910v? I'm trying to figure out how to get 4g working.
Click to expand...
Click to collapse
They are a custom aroma gapps package for the Note 4 because the Open GApps aroma package doesn't work. Are you using hsbadr's lineage on your N910V? The latest build is kinda old which is why you may be having problems with 4G.

Any chance of getting official build version?

Issues with battery life
Hi! First of all, thanks to all developers, this wouldn't be possible without you, I've been using this rom quite a while, and it's amazing, just a few questions, the battery optimization isn't as great as I wish it would be, is there any kernel to increase battery life? If there's any i would be more than happy to try it, i've been in love with this rom, it's simply brilliant, Thanks for your support and your hard work... Cheers

Hello,
I just flashed LOS 14.1, works great!
I'm trying to update my modem (as recommended by ripee), but my baseband is n910w8vlu1dpe2. I did find a file for n910w8vlu1dpi2, but no 'PE2.
It's a SM-N910W8 from Rogers in Canada.
What modem firmware should I use?
Thanks!

jaylimo84 said:
Hello,
I just flashed LOS 14.1, works great!
I'm trying to update my modem (as recommended by ripee), but my baseband is n910w8vlu1dpe2. I did find a file for n910w8vlu1dpi2, but no 'PE2.
It's a SM-N910W8 from Rogers in Canada.
What modem firmware should I use?
Thanks!
Click to expand...
Click to collapse
The only one labelled as N910W8 in my BL_CP folder.

Da_Mak said:
Hi everybody !
I've got a N910F and flash the 20170605 version by ripee. Baseband : N910FXXS1DQD1
I'm coming from Samsung stock version.
I connect my phone to my car (Peugeot 208) via Bluetooth. My car doesn't display titles of song from Deezer or YouTube anymore.
It display just the name of the phone.
Does anyone have the same issue ? (streaming is working)
Click to expand...
Click to collapse
Just to say that the Bluetooth works well now with new versions. Thank you developpers.

Flashed 20170226 trtlevzw and it wont recognize my SIM card. Then tried Resurrection Remix and same thing, shows no SIM card. Cant find any solutions anywhere and need some guidance.

azreark1 said:
Flashed 20170226 trtlevzw and it wont recognize my SIM card. Then tried Resurrection Remix and same thing, shows no SIM card. Cant find any solutions anywhere and need some guidance.
Click to expand...
Click to collapse
Flash this in TWRP either before or after flashing the rom zip, it doesn't matter: WipeTelephonyProviderData.zip

I don't ask for ETAs and my intention is not to force any release but will officiall lineage OS for the Note 4 will come in general some day?

TA-1000 chinese version with Google play installed - can be update outside China

Hello all!
I have a Nokia 6 TA-1000 with Google play preinstalled, with 4GB RAM /64GB. The phone is stuck at 7.1.1, 1st April.
Is there a chance to update the phone, without putting firmware from another region?
Thanks in advance!:good:

I've got the same problem. Sigh.
And now the Oreo beta is over and rollout has begun, so the official ROM should be easy to get right?

Vivio said:
Hello all!
I have a Nokia 6 TA-1000 with Google play preinstalled, with 4GB RAM /64GB. The phone is stuck at 7.1.1, 1st April.
Is there a chance to update the phone, without putting firmware from another region?
Thanks in advance!:good:
Click to expand...
Click to collapse
Why dont you try this
Here are the files to restore original software on TA-1000.
1. Download original software for TA-1000 (build 00CN_3_31A_SP) in nb0 format
https://yadi.sk/d/fN5Oinvt3MwufR
2. Download OST LA v6.0.4
https://yadi.sk/d/hkDVImee3NAZ7a
3. Download patch
https://yadi.sk/d/Tm2MvTJs3NAZy2
If you know how to flash via OST LA tool then you can flash it, else tell me if you dont know
I will explain you one by one
Hit thanks button if you find this useful
Happy flashing

Thank you, sltushar!
Now on the phone I have 00CN_3_170. In your opinion, this is the problem? This is not the real Chinese build, instead is 00CN_3_31A_SP?
Is there a chance to go back to my actual build, after trying what you've suggested?
Cheers!

Vivio said:
Thank you, sltushar!
Now on the phone I have 00CN_3_170. In your opinion, this is the problem? This is not the real Chinese build, instead is 00CN_3_31A_SP?
Is there a chance to go back to my actual build, after trying what you've suggested?
Cheers!
Click to expand...
Click to collapse
The one I told you, was suggested by developers, its official build for Nokia 6 TA 1000, after this you will get the OTA updates
Install them, then you will get OREO officially
Remember: after you flash this firmware, make a hard reset to let it work perfectly.
Good luck
Hit thanks button if you find this useful
Happy flashing

Vivio said:
Thank you, sltushar!
Now on the phone I have 00CN_3_170. In your opinion, this is the problem? This is not the real Chinese build, instead is 00CN_3_31A_SP?
Is there a chance to go back to my actual build, after trying what you've suggested?
Cheers!
Click to expand...
Click to collapse
I had the same problem as you, with a ta-1000 and its modified rom. I did flash as sltushar says and from there all the OTAs were installed automatically. It is the only way to make your ta-1000 operational and updated.

Hello guys. I've got TA-1000. I'm in Malaysia.
Could you help me to have Oreo on my Nokia 6 Chinese version. I'm stuck on 7.1.1 and I don't know anything about flashing. I have an idea about upgrading using the sd card, but flashing! I have no idea.

links are not working
sltushar said:
The one I told you, was suggested by developers, its official build for Nokia 6 TA 1000, after this you will get the OTA updates
Install them, then you will get OREO officially
Remember: after you flash this firmware, make a hard reset to let it work perfectly.
Good luck
Hit thanks button if you find this useful
Happy flashing
Click to expand...
Click to collapse
Hi sltushar,
i'm new to this forum and i'm trying to get updates to my nokia 6. so i was trying to download your rom and other software but those links are not working can you give me working ones...
thank you in advance

chanuka89 said:
Hi sltushar,
i'm new to this forum and i'm trying to get updates to my nokia 6. so i was trying to download your rom and other software but those links are not working can you give me working ones...
thank you in advance
Click to expand...
Click to collapse
Which version of nokia 6 you have.

My Son's SM-G975U is still on Android 10 Beta from a year ago? Need Help

So my son broke his phone and is now using my old Verizon s10+. At the time I stopped using it, was still on firmware VZW SJ8 ( Android 10 beta)
My question is this.
Do I need to flash all subsequent firmwares sequentially? Can I just download a full version of the latest firmware and flash it and be up to date?
If so, does anybody have a good place to download said firmwares?
It's been a minute since I flashed anything. I don't remember anything apparently.

billydroid said:
So my son broke his phone and is now using my old Verizon s10+. At the time I stopped using it, was still on firmware VZW SJ8 ( Android 10 beta)
My question is this.
Do I need to flash all subsequent firmwares sequentially? Can I just download a full version of the latest firmware and flash it and be up to date?
If so, does anybody have a good place to download said firmwares?
It's been a minute since I flashed anything. I don't remember anything apparently.
Click to expand...
Click to collapse
Hi mate
Not an expert on you phone type but i would for sure flash a full up tp date firmware
Check this thread , i am sure they can help you there

Perfect, thank you