Related
I attempted to update the BIOS on my HP iPAQ hw6940 mobile messenger by downloading and installing the update from hp.com. I discovered during the process that the USB cable I was using was not properly powered and the update failed. The device remains in a serial connection mode and cannot be reset or restarted. The screen is dimmed and displays “serial v.g.39”. Even after solving the USB power issue, the BIOS updater was unable to connect to the device. Syncing through MSDC also fails. Is there a way I can restore connectivity to the device so that I can complete the BIOS update?
jaydee08 said:
I attempted to update the BIOS on my HP iPAQ hw6940 mobile messenger by downloading and installing the update from hp.com. I discovered during the process that the USB cable I was using was not properly powered and the update failed. The device remains in a serial connection mode and cannot be reset or restarted. The screen is dimmed and displays “serial v.g.39”. Even after solving the USB power issue, the BIOS updater was unable to connect to the device. Syncing through MSDC also fails. Is there a way I can restore connectivity to the device so that I can complete the BIOS update?
Click to expand...
Click to collapse
Hi, i used to have the same problem........ keep following full restall step again. Restart comp, reconnect Ipaq, 4 buttons your ipaq, make sure all connectons is secure before trying the installaton again. Hp hw6900 series have a "fail safe" rom unlike newer models that why you get the the display Hp logo, V G 0.39, etc. ALL you have to do is reinstall the rom......... if it does not work again, take a 6-24 hrs rest, drain the battery, take out the battery from the ipaq. after 24hrs, place everything back to normal and retry. keep trying till you get the loading........... Happy if you see the loading, dont touch anything til its complete this time.....
enjoy cracking your ipaq... be patience with this ipaq, it has a weak heart
Thanks.
I managed to successfully restore the BIOS via USB by downloading and installing the update from HP.com on my Vista machine. It didn't work from an XP machine, which is what others including HP told me I needed.
Interesting that the 24 hr break and battery drain actually seemed to have had an effect. A weak heart indeed, but not a bad little device. I'm happy to have it back.
Thanks again.
Hi,
looked for an answer to this problem in the forum but didn't find it, i have a stock xperia play, sim free running gingerbread 2.3.2 and i'm based in the uk and have a uk handset. My problem is although i am offered the 2.3.3 update, when i try to get it i get stuck at the preparing phone stage on pc companion software, the phone switches off then the software tells me to disconnect USB cable from pc and phone, then it tells me to check battery power level(phone is off?) is at least 50% (it is 80%)then says turn the phone off? leave for 5 seconds then plug back in whilst holding the back hardware button. After this the computer does 3 beeps (normally error noise) and i have to do this all again, don't see anyone else having problems updating? your help would be greatly appreciated.
Use SUSE! Should work just fine.
USe another computer if it doesn't work
and yes try http://www.sonyericsson.com/cws/sup...etailed/updateservice/xperia-play?cc=gb&lc=en
Before asking for help
i have narrowed it down to the computer not recognising the phone when it is off(blue light mode) i looked at device manager, says there is no driver for S1boot fastboot?
driver are on program files > sony ericsson > pc companion > driver 32/64bit
check there and install them manually
or check the pc companion in sony ericsson menu on your phone and connect your phone and press install
then install pc companion and let it do his work installing the driver.
check my mtpapp thread if you need more detail
don't clear mtpapp (your apps should be ok btw)
Tried everything now, still nothing happens after i plug in usb cable whilst holding the back button, what is actually supposed to happen after this point, i get the blue light, nothing else.
rojach said:
Tried everything now, still nothing happens after i plug in usb cable whilst holding the back button, what is actually supposed to happen after this point, i get the blue light, nothing else.
Click to expand...
Click to collapse
When the light goes blue, you are connected in either bootloader or recovery mode. If your device is not detected, go to device manager and install the drivers manually
Sorry double post
Are you connecting the phone via a USB hub?
If you have many usb ports on your pc being used, try to disconnect a few and plug the phone directly to your pc.
I had this same issue and it happened because my stupid logitech keyboard keeps messing with my usb drivers everytime i plug in a new USB device.
I unplugged the keyboard and the update went swiftly.
In order to enter flash mode, you ought to:
1)switch off the phone
2)remove the SIM card and sdcard (this is mandatory!),
3)remove the battery for 5 seconds, then put it on.
4)hold the Back button while you connect the device.
The device will shine with a green light. The blue light is used for the Fastboot mode, and you get that light if you:
1) Switch off the device
2) Hold the Search button (the magnifying glass one)
3) connect the device to the USB cable.
Hi all, thanks for your help but still no luck, i have tried all of the above on 2 computers, the same problem occurs, not sure what is supposed to happen when i plug the USB into the phone whilst holding the back button during update? all i get is a blue light on the phones power button. Nothing appears on the pc either??? i have done a full factory reset and tried installing drivers, is there a specific driver for entering the recovery mode on xperia play?
Sony Update Issues
http://unlockbootloader.sonyericsson.com/instructions
Note: We have seen in some forums that customers unlocking the boot loader on their phones have experienced problems when they accept a FOTA (Firmware upgrade Over The Air) update. The issue has been reproduced and we are working on a solution. For customers that have unlocked the boot loader please do not accept the Firmware upgrade OTA.
i CAN't connect it with my pc and rsd lite can't detect my phone when i plugged it in!
also, i can't charge it via PC nor the power supply(i have tried using moto's one and a unofficial power supply)
but the most wired thing is i can charge it via an"portable battery"
maybe it is an hardware problem and i can't flash back to my official sbf
warranty is now void?
or can i flash a SBF without connect to PC?
give me a now hope plz
Have you tried the boot loader mode (forum.xda-developers.com/wiki/index.php?title=Motorola_Defy):
---------------------------------
How to get rsdlite to recognise a phone that won't boot
You flashed, something happened, now screen is black, phone doesn't react, u are in a boot loop, rsdlite cant recognize the phone. you're right here.
To get RSDLIte to recognize your phone you have to enter boot loader mode. this means press VOL-UP + POWER If nothing helps, try pushing VOL UP before!' you put the battery in (RSDLIte should be running and awaiting a new connection at that time) If you are using Windows 7, try seting RSDLite to "compatibility mode: Windows XP SP3".
i have tested the connection in bootmenu and RSDLITE not able to recognize my phone
any ideas?
Hello
Please somebody help me. My notebook doesn't recognise my DEFY via USB. More details: When I got the phone it worked but after a while not always. Sometimes it connected 5 minutes later but nowadays doesn't work at all. By the power charger it's charging normally.
When it's plugged to the computer, the phone's screen lights up, but doesn't connect or charge. If I tick on/off meanwhile the USB debug, the USB sign shows up but it's still not charging or connecting. (I've already tried all 4 options)
Moreover when I remove the USB cable, the USB signal doesn't disappear until I restart the phone or abort the USB in the application manager.
I've already tried to install or uninstall the driver (Moto Helper) but didn't help.
The main problem is that if I connect the phone to the notebook, the device manager doesn't see it. (I tried different computers, Win XP and Win 7)
I did a factory reset several times but nothing happened.
I think there was an automatic software update and maybe the problem started at this time.
This is my first Android phone and I'm not an expert so I really need your help.
I wanted to install a new ROM but the RSD lite doesn't see the phone neither in Bootloader mode. It says: "Connect USB Data Cable" and when I connect it says: "USB" so recognises something.
I'm trying to fix it for weeks but I can't find to solution.
System version: 34.177.3.MB525.Retail.en.GB
Build no: JOREM_U3_3.4.2_177-3
Win7 x64
Sorry about my English and thank you for your help.
I didn't mean bootmenu tommy, BOOTLOADER MODDE: press VOL-UP + POWER, try pushing VOL UP before! to get RSDLIte to recognize your phone(RSDLIte should be running and awaiting a new connection at that time)
---------- Post added at 09:52 PM ---------- Previous post was at 09:42 PM ----------
Hey poross, I guess that your problem seems like a virus activity or maybe a faulty USB cable. Try another USB cable and another PC (with a good antivirus running, indeed!). Before connecting to the new PC, reset your defy...
I just hope it helps. If not, maybe your defy has a hardware problem...
If you are using windows 7 make sure that you installed good drivers for system x86/x64. I'm using RSD on Windows 7 X64 and I have no problems with it. Check in device manager for some unknown devices after plug phone to USB. If system wont see any new device after plugging it wont be driver problem but something wrong with phone, usb cable or usb port. Even if driver fails system should see the phone like unknown device or something.
MMarv said:
I didn't mean bootmenu tommy, BOOTLOADER MODDE: press VOL-UP + POWER, try pushing VOL UP before! to get RSDLIte to recognize your phone(RSDLIte should be running and awaiting a new connection at that time)
---------- Post added at 09:52 PM ---------- Previous post was at 09:42 PM ----------
Hey poross, I guess that your problem seems like a virus activity or maybe a faulty USB cable. Try another USB cable and another PC (with a good antivirus running, indeed!). Before connecting to the new PC, reset your defy...
I just hope it helps. If not, maybe your defy has a hardware problem...
Click to expand...
Click to collapse
actually,i am in bootloader(versoin 9.10) and rsdlite still not able to detect my phone =..=
but i notice that when i plugged it in,the phone showed "transfer mode USB"
but nothing happened in rsdlite,no info of device properties.....
what the hell.....
To tommy:
Let's make a conclusion:
1-You have the correct drivers but RSDLite doesn't recognize your phone even in the bootloader mode
2-The charger can't charge your battery
3-The portable battery CAN charge it! (So the phone connector has no problem)
So: It is most likely that you've got a faulty usb cable
Thanks for dealing with my problem
Chamelleon: The device manager doesn't see anything while the cable is plugged but the phone detects something -probably the USB power- but doesn't connect at all. It happpens in the bootloader mode as well so detects the USB cable but it seems that the phone doesn't send sign to the computer. I haven't had any problem with USB detection, connection (except this phone) for a long time.
MMarv: You mean there's a virus on the phone? if it's the situation, installing a virusbuster to the phone could solve it? Which one is a good prog?
I tried with 3 different cables and still not working. With the wall plug charger and the car's USB socket are ok but none of them charges from the notebook.
poross said:
Thanks for dealing with my problem
Chamelleon: The device manager doesn't see anything while the cable is plugged but the phone detects something -probably the USB power- but doesn't connect at all. It happpens in the bootloader mode as well so detects the USB cable but it seems that the phone doesn't send sign to the computer. I haven't had any problem with USB detection, connection (except this phone) for a long time.
MMarv: You mean there's a virus on the phone? if it's the situation, installing a virusbuster to the phone could solve it? Which one is a good prog?
Click to expand...
Click to collapse
I mean Virus on your laptop. Hard reset your phone and try another PC with a good anti-virus installed!
So if cable is ok, usb port in pc and phone is ok it must be driver problem. Delete all what appears as Motorola driver including drivers from system32 and then install it again. You can also try to install it on different PC with 32 bit system. Do not install any unknown drivers, just install Motorola Media Link or Motorola Software Update cause if you have this one and some different it can be problem. Or you just have something wrong with system. First try on different pc with drivers from MML or MSU.
Succeeded.
The solution was incredibly simple. It was strange when I did a factory reset (4 times) and rebooted the phone it restored my acccounts, shortcuts, settings. I ticked off two things: settings/Privacy/Back up my data and Automatic restore. Then took out battery then I put it back and began the reset. After it the phone forgot really everything of my details and now the USB is working perfectly.
MMarv said:
To tommy:
Let's make a conclusion:
1-You have the correct drivers but RSDLite doesn't recognize your phone even in the bootloader mode
2-The charger can't charge your battery
3-The portable battery CAN charge it! (So the phone connector has no problem)
So: It is most likely that you've got a faulty usb cable
Click to expand...
Click to collapse
i tried another usb cable,but it still not able to connect.....
poross said:
Succeeded.
The solution was incredibly simple. It was strange when I did a factory reset (4 times) and rebooted the phone it restored my acccounts, shortcuts, settings. I ticked off two things: settings/Privacy/Back up my data and Automatic restore. Then took out battery then I put it back and began the reset. After it the phone forgot really everything of my details and now the USB is working perfectly.
Click to expand...
Click to collapse
not working for me =..=
however,i have 2ndinit installed
and after factory reset,the phone is still rooted and 2ndinit still here
so will it cause any problem?
Hey Tommy,
I nearly bricked my defy, and the battery was low too. RSDite not able to recognize it. It seemed that charger can't charge the battery either. But I was wrong. The charger was actually charging the battery. I removed the back cover with the charger connected and the battery in place. I tested the two outer connectors of the battery with a voltmeter (when the battery is in place, they are slightly exposed). Initially the voltage was about 3 volts and steadily increased... Test it if you can. If it is not charging, I bet that it is a phone connector problem. You should return it and I think they can repair it easily...
Hi Tommy1994
First I'm not an expert, this is my first android phone.
My probelm was (I think) an android error. I made factory reset 4 times but it always restored my details. (It's not a perfect FR). After it I did a bit different FR:
-1. in the normal android/ settings menu/Privacy/Back up my data -thick off. So it won't make any backup
-2. swich off the phone
-3. take the battery out for 30sec then put back
-4. press the volume down and hold it while you press the power on button but hold the volume down for more 4 sec. you will see an android robot with an exclamation mark.
-5. press the volume up and down together that's how you enter to the Recovery menu.
-6. first chose the "Wipe cache partition" (you can move with the volume buttons and select with the power button) -wait till "Cache wipe complete"
-7. then chose the "Wipe data/factory reset" - wait till "Data wipe complete"
-8. after these chose the "Reboot system now"
-9. if your phone doesn't want to start just get the battery out for 30sec and take back.
note: you will lose everything of your personal details, installed apps...
note2: it's my FROYO's (android 2.2.2) menu probably yours is different
Sorry for my English, hope you understand though.
hope this helps
If your are trying to connect on windows vista or 7 I think you must be loged on as admin of the computer. I had same problem but when I used windows XP it worked fine this is for rsd lite
going to try ,i really hope it will help
thx
i have flashed cm7 and still not able to connect it to PC
i am quite sure it is not software problem, maybe it is about the USB cable?
is that possible the USB cable can charge but not able to transfer data?
hi tommy1994 ,
i'm having the same problem as you, when i'm in the bootloader screen the rds lite program don't find my defy...
have you found any solution?
Thank you very much
Yesterday i flashed my Jiayu S3 to lolipop (i tought) and i just bricked my phone!
After reboot it was just dead.. when i plug into pc with USB i hear the connect sound and after 2 seconds the disconnect sound. This keeps on going until i pull the USB plug. When i look in DeviceManager i see it refresh after every sound, but nothing pops up (unknown device or whatever). I deletet all usb drivers with usbdeview, restart pc but still no changes.
I tried with or without battery, but without it does nothing at all.. i tried holding Vol+ or - or both or with power button, but nothing.
Read some threads about unbrick and install correct usb driver for jiayu s3, but all the options they came with does not work on my device!
I'm a little despered now and don't know what to do.. i get the feeling that my 2 weeks old phone is dead? :'(
My pc has windows 7
Did the flash with SP Flashtool 5.1516
Did not untick preload in flashtool, i guess i got the wrong preload or something??
Please help!
No one..? :crying:
Lowrida said:
Yesterday i flashed my Jiayu S3 to lolipop (i tought) and i just bricked my phone!
After reboot it was just dead.. when i plug into pc with USB i hear the connect sound and after 2 seconds the disconnect sound. This keeps on going until i pull the USB plug. When i look in DeviceManager i see it refresh after every sound, but nothing pops up (unknown device or whatever). I deletet all usb drivers with usbdeview, restart pc but still no changes.
I tried with or without battery, but without it does nothing at all.. i tried holding Vol+ or - or both or with power button, but nothing.
Read some threads about unbrick and install correct usb driver for jiayu s3, but all the options they came with does not work on my device!
I'm a little despered now and don't know what to do.. i get the feeling that my 2 weeks old phone is dead? :'(
My pc has windows 7
Did the flash with SP Flashtool 5.1516
Did not untick preload in flashtool, i guess i got the wrong preload or something??
Please help!
Click to expand...
Click to collapse
so you cannot boot into recovery or fastboot either?
Lowrida said:
Yesterday i flashed my Jiayu S3 to lolipop (i tought) and i just bricked my phone!
After reboot it was just dead.. when i plug into pc with USB i hear the connect sound and after 2 seconds the disconnect sound. This keeps on going until i pull the USB plug. When i look in DeviceManager i see it refresh after every sound, but nothing pops up (unknown device or whatever). I deletet all usb drivers with usbdeview, restart pc but still no changes.
I tried with or without battery, but without it does nothing at all.. i tried holding Vol+ or - or both or with power button, but nothing.
Read some threads about unbrick and install correct usb driver for jiayu s3, but all the options they came with does not work on my device!
I'm a little despered now and don't know what to do.. i get the feeling that my 2 weeks old phone is dead? :'(
My pc has windows 7
Did the flash with SP Flashtool 5.1516
Did not untick preload in flashtool, i guess i got the wrong preload or something??
Please help!
Click to expand...
Click to collapse
Just flash it again, but this time with "Firmware upgrade " in SP Flashtool instead of "Download". Change from KK to LL needs reepartitioning, so firmware upgrade.
The reason why you don´t "see" the S3 any longer on the pc is, that the USB storage mode from KK, which is driverless for windows, don´t work right now on LL.
Once flashed to LL you will need to install a driver, for windows to connect to the S3.
@ Dior DNA:
No i can't. Phone does nothing with the buttons. Only diference if i hold Vol - then time from connect sound and disconnect sound is a little longer.. about 10 seconds. But still nothing happens.
@1testi:
Flashtools can't see my phone. I tried it a hundred times. With battery, without battery, with Vol - and with Vol +.
When i connect the USB cable i hear the connect sound and after 2 a 3 seconds i hear disconnect sound. This goes on and on until i pull the USB cable out. In devicemanager i see a refresh going on, but nothing pops up.
I'm realy despered on what to do now?
Lowrida said:
@1testi:
Flashtools can't see my phone. I tried it a hundred times. With battery, without battery, with Vol - and with Vol +.
When i connect the USB cable i hear the connect sound and after 2 a 3 seconds i hear disconnect sound. This goes on and on until i pull the USB cable out. In devicemanager i see a refresh going on, but nothing pops up.
I'm realy despered on what to do now?
Click to expand...
Click to collapse
Why the SP Flashtool isn´t working any longer? You didn´t deinstalled the driver, did you? Just try to flash again with "Firmware Upgrade".
I don´t know a way to reinstall the driver in windows without the preloader. The only thing you can do, as far as i know, is to use a linux
pc to flash again. Linux don´t need a driver for SPF, only some rules.
Lowrida said:
@ Dior DNA:
No i can't. Phone does nothing with the buttons. Only diference if i hold Vol - then time from connect sound and disconnect sound is a little longer.. about 10 seconds. But still nothing happens.
(
Click to expand...
Click to collapse
Booting into recovery or flashtool I meant regardless of pc and/or spflashtool.
If I recall correctly:
hold volup and power boots recovery
hold voldn and power boots flashtool
If you can boot recovery then which one is it? Maybe you can restore something or manually flash preloader bin from there.
After the flash i reboot and then the connect and disconnect sound appears. So i tried differend things, but could not connect. I wanted to flash again, but flashtool did not reconice the phone and nothing in DeviceManager. That's why i thought to remove the driver and try to re-install it. But that did not help..
Holding Vol - or + button with power button or both Vol buttons with power button does nothing.. i tried to hold all combinations at least 30 seconds, but nothing at all.
I have no Linux pc or any knowhow to make a Linux pc.. or a pc to install Linux on..
One last thing you can try: remove the battery, wait a little, insert the battery again. Hold vol+ key, keep holding it and press power
button, while still holding the vol+. If you don´t see anything happening then you bricked the phone.
You will need help from a professional or at least from someone with a linux machine, sorry.
I'll try that.
You have any idea what could have caused the brick?
As i wrote above, moving from KK to LL with wrong parameter "Download" in SPF.
....and a not working recovery.
You should try this method :
darmowyinternet.net/forum/temat-poradnik-jak-uruchomic-uceglony-telefon-po-wgraniu-zlego-romu-test-point_383
unfortunately you have to translate before
Ok i tried that site with google translate and i could a little make up what they are saying.
But that is a very drastically operation, and i would like to give it some other tries before dismantling my phone.
So i googled and googled.. came here: http://forum.xda-developers.com/showthread.php?t=889128
Had enough electronics lying around from my former 27mc hobby, so searched for the right resistors,
cut up a micro usb cable and give it a try... well.. nothing! Tried for about an hour and gave up.
Then i googled on Unbrick Jigs, but for what i read they are only for Samsung phones, so i gues the trick
with the resistors were also?
So googling again... came here: http://forum.xda-developers.com/showthread.php?t=2454004
Reading the tread and the comments, someone mentioned a download for "Mediatek Driver Auto Installer".
Downloaded that and installed the drivers. Plugged in my phone and... whoohoo!! Something is happening! :silly:
My devicemanager saw an "Alcatel single RNDIS interface". I unplugged and plugged my phone a few times to
be sure it was my phone. Sooo... one step further! :good:
Then i googled on this device.. came up with all sorts of network devices, not helpfull. Then googled on Jiayu with
this device. Came up with this tread: https://www.china-devices.com/topic...vcomm-drivers-onto-your-pc-win-7vistaxp-only/
It's a tread about bricked Jiayu G3 devices, but i thought, 'What the heck, lets give it a try!'.
I downloaded the "MTK Megapack - All Tools Here!" and unpacked. Wend back to device manager and manually updated the driver
of the Alcatel device. Show all devices - browse - wend to Megapack map and there were MTK drivers for the 65xx device.
And yess.. when i plug in my phone there's the device: " MTK USB Port (COM7) "
SP Flashtools sees my phone again! :good:
Tried to flash a stock preloader, but got an error: "BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) – [EMI] Enable DRAM failed!"
But for now that's a problem for tomorrow.. it's almost 2:30 and i have to got some sleep!
(sorry for the misspellings or telling things not clear, i'm tired and english is not my main language)
Grats!
You can google the error. This leds you in the right direction.
It's alive!!!!!! :laugh::silly::victory:
Because the kitkat stockrom i downloaded gave me the same error over and over i searched for something else.
So i downloaded TF Extreme lolipop 5.1 this morning and give it a try. And all went well. I pulled the usb plug and
pushed power button.. only vibration but nothing. Then pulled the battery and after few seconds put it back in
and try power again. Only 1 vibration.. then tried Vol + and - combinations but nothing. (dammn!)
Then plug the usb in and i saw the battery icon.. it was total empty! (because of a week trying).
So now it's charging and i hope it starts, can't wait!!
Thanx all for the effort in helping me out! :good:
Edit: Ok, so i could not wait and hit power! It shows green screen with Jiayu S3 logo and text "New Load". So i guess it's prepairing for first startup!
my s3 basic is not charging when on.. also when connected to pc thru usb, ipc shows device malfunctioning ,and there is no indication on phone..I try to connect to sp flash tool also no success..same error"usb device not recognized pops up every 2s.everything else is fine..Any method to upgrade to 5.1 now on official kk
Kinda need help, happened something similar
It happened something similar to me.
I flashed the whole ROM, bootloader included, I was very sure that my model, Jiayu S3 3GB ROM + 32GB RAM, was the correct, but still bricked my phone.
There's no problem at all when I plug it into my PC, I installed the lastest MTK drivers on windows 10, having to disable the signature enforcement.
The problem comes when I start flashing. I only mark the bootloader, then I press "Download" (on the lastest version of SP Flash Tools), and plug the phone, with the battery in it (I've tried without battery, pressing all possible combinations and does nothing), when I plug it in with the battery and pressing no buttons, the driver is detected as MTK USB Port. That's a good thing I guess. But It does not pass from the red bar, and gives me the known error "Enable DRAM Failed".
I've tried to google any possible solutions, reinstalling other version of the MTK drivers, on different versions of Windows, with other versions of official ROMs, and the result is always the same.
The only thing that's left to try is flashing it with an Ubuntu machine, which is something I do not expertise to be honest, but I'm gonna gather some info and try to do it.
However, if someone has any idea of what I might be doing wrong (excluding the part when I flashed the bootloader, I'll never do it again), I would be really grateful for any kind of help.
Thank you!
Kiei said:
It happened something similar to me.
I flashed the whole ROM, bootloader included, I was very sure that my model, Jiayu S3 3GB ROM + 32GB RAM, was the correct, but still bricked my phone.
There's no problem at all when I plug it into my PC, I installed the lastest MTK drivers on windows 10, having to disable the signature enforcement.
The problem comes when I start flashing. I only mark the bootloader, then I press "Download" (on the lastest version of SP Flash Tools), and plug the phone, with the battery in it (I've tried without battery, pressing all possible combinations and does nothing), when I plug it in with the battery and pressing no buttons, the driver is detected as MTK USB Port. That's a good thing I guess. But It does not pass from the red bar, and gives me the known error "Enable DRAM Failed".
I've tried to google any possible solutions, reinstalling other version of the MTK drivers, on different versions of Windows, with other versions of official ROMs, and the result is always the same.
The only thing that's left to try is flashing it with an Ubuntu machine, which is something I do not expertise to be honest, but I'm gonna gather some info and try to do it.
However, if someone has any idea of what I might be doing wrong (excluding the part when I flashed the bootloader, I'll never do it again), I would be really grateful for any kind of help.
Thank you!
Click to expand...
Click to collapse
Oeps it might be the same problem with the 32GB version as I have.
See http://forum.xda-developers.com/showpost.php?p=68036678&postcount=295
I am waiting for a stock ROM backup.
I have learned to never flash the original preloader again.
xtyphoon said:
Oeps it might be the same problem with the 32GB version as I have.
See http://forum.xda-developers.com/showpost.php?p=68036678&postcount=295
I am waiting for a stock ROM backup.
I have learned to never flash the original preloader again.
Click to expand...
Click to collapse
You're right, with the 32GB rom version (which is still unavaliable for public use) it worked! I still got it here, so anyone feel free to ask me the link too.
Thanks to xtyphoon and Dior DNA and everyone who made this possible, if you ever come to Girona city, I'll buy you a drink ;D
Kiei said:
[...]if you ever come to Girona city[...]
Click to expand...
Click to collapse
I was around there few weeks ago
Hello everybody, I own an Xperia XC and a couple of months ago I’ve rooted it and I flashed 34.1.A.1.198 firmware, Advanced Stock Kernel and TWRP-recovery. All worked fine, until two weeks ago it lost suddenly the USB connectivity. I tried different USB-cables on different PC’s but neither the phone, nor the PC’s act in any way. Even in fastboot- or flashmode it doesn’t appear in the device manager of the PC’s. I made for a couple of times factory reset, I even changed the phone’s USB charging port with a new one, but nothing changed. I could load the phone only over a power strip with USB-power-supply. I tried to flash the firmware 34.1.A.1.198 again using flashfire (I made a pre-rooted .zip-file with PRFCreator) but now I get a boot-loop. The phone starts till Sony-Logo and after a few seconds it turns off and boots again. Trying to get in recovery mode has no effect (pressing volume up or down and Power-button).
Has anyone any idea, how can I solve this problem? Is there any possibility to make a hard reset without USB-connection?
man why did mess with your phone when you knew you cant use usb connection???
try this: press all buttons and hold them to turn the phone off then try to get access to twrp(or any recovery on your phone) then use a usb type-c flash memory with your phone to flash another zip and hopefully just bring the phone back to life
Kianush said:
man why did mess with your phone when you knew you cant use usb connection???
try this: press all buttons and hold them to turn the phone off then try to get access to twrp(or any recovery on your phone) then use a usb type-c flash memory with your phone to flash another zip and hopefully just bring the phone back to life
Click to expand...
Click to collapse
Thanks for your ansver Kianush, but it seems the phone can't handle any connected devices at the USB-port. Besides of that, when I try to connect it in flash- or fastboot mode, the LED goes green or respectively blue, but none of my PC's doesen't recognize it as a connected device in any way.
I tested the PC connection with an other Xperia XC (my daughter's), it worked without any problems. It was shown in the dewice manager as an "SOMC Flash Device".
It seems like some USB-kernel drivers are lost (?)
I think an option could be using s1tool, but I don't find something for Xperia XC and I don't know yet where the testpoint is for this phone.