Related
Just ran into a problem which took me some time to solve. Thought I would share it to save other people some frustration.
After an adb reboot the i5800 got stuck in "modem" mode. i.e. android booted fine but gave a modem and a serial port over usb rather than adb. Reboots did not solve the problem.
The solution is to enter recovery screen:
reboot recovery
OR
press proper buttons to get into recovery mode
And then perform a reboot from there
Is this the same as *#7284# and selecting "PDA" on UART and USB, or just on USB? Or is this a completely separate thing?
miki.antena said:
Is this the same as *#7284# and selecting "PDA" on UART and USB, or just on USB? Or is this a completely separate thing?
Click to expand...
Click to collapse
Thanks so much for this!!!! After helping hack a friends build.prop to enable Apparatus compatibility in the Market, I found USB wasn't working properly anymore. Resetting changes in the phone didn't help (I had to do this via the phone terminal) although I at least managed to buy Apparatus before the sale ended.
After initially getting confused due to a lack of drivers and the occasional 'nH' showing up devices without drivers which made me think something was borked, I worked out from the VID & PID it was just the lack of drivers making (well I'm not sure why it did the 'nH' sometimes it got serial something instead), once I installed the drivers all was fine.
Except still mass storage wasn't showing and the Samsung connect manager didn't show up on my phone when I connected USB, nor did ADB work at all. In fact, it didn't even show up in the phone menu as debugging mode if I didn't start phone with it connected (or something like that). Funnily enough when I did get it the debugging to show up I did get the USB mass storage to show up in the phone, but it didn't help (it just unmounted the card which I think is all it ever does).
Anyway after a bit more fooling around I eventuall came across http://forum.xda-developers.com/showthread.php?t=1215103 and the stuff about modem and mkasick's post which sounded a lot like it could be my problem. The code for that Samsung phone didn't work so I searched for the 5800 and came across this giving me the right code. Sure enough UART (but not USB) was set to modem instead of PDA. I was unsure whether that was wrong but changed it anyway and yep that fixed it!
I still have no idea what went wrong. I had thought may be the phone didn't like me rebooting via ADB but I've now done that several times. In fact most of the stuff except install a superuser update has been more or less repeated. I guess it was just some strange rare occurence that it somehow got changed. I did have to reconnect the USB while working the first time, not sure why but ADB lost connection then I found couldn't connect. Perhaps that's somehow related. Now that I know what to do, it's trivial but very annoying when I didn't. I still don't get why Samsung decided to make the connect manager (my phone doesn't have that) only to have some hidden option where it can be set to modem or USB.
Partially because of this, I never got to get Tilestorm HD become compatible in time for the sale although my friend wasn't so interested in that. (Eventually I worked out using the THC Tattoo modded market which reports a fake resolution enables it. Well, I also modified the build.prop but I don't know if that was necessary. I wasn't able to do it solely by the build.prop. But it was way too late by then to buy Tilestorm HD cheap.)
Nil Einne said:
I still have no idea what went wrong. I had thought may be the phone didn't like me rebooting via ADB but I've now done that several times.
Click to expand...
Click to collapse
This may sound like crazy idea, but is your USB port/connector clean?
(The USB port allows for dozens of different phone functions when using very specific resistance between data pins.)
i bought a LG D802 32gb last night as i was using a 16 gb before i wanted to flash cloudy g3.. so i tried to install custome recovery twrp...
now i am in fast boot mode..
it says :
[880]fastboot mode started
[910]udc_start()
when i attach usb cable
[1100]-reset-
[1110]-portchange-
[1120]-reset-
[1130]-portchange-
[1140]-fastboot: processing commands
i tried holding volume + and and attaching the usb cable but no luck ... so now i have NO RECOVERY, NO DOWNLOAD MODE, AND MY WINDOWS PICKING UP MY PHONE AS "USB MODEM PHONE ADB PORT"
please help
Hi,
looked for an answer to this problem in the forum but didn't find it, i have a stock xperia play, sim free running gingerbread 2.3.2 and i'm based in the uk and have a uk handset. My problem is although i am offered the 2.3.3 update, when i try to get it i get stuck at the preparing phone stage on pc companion software, the phone switches off then the software tells me to disconnect USB cable from pc and phone, then it tells me to check battery power level(phone is off?) is at least 50% (it is 80%)then says turn the phone off? leave for 5 seconds then plug back in whilst holding the back hardware button. After this the computer does 3 beeps (normally error noise) and i have to do this all again, don't see anyone else having problems updating? your help would be greatly appreciated.
Use SUSE! Should work just fine.
USe another computer if it doesn't work
and yes try http://www.sonyericsson.com/cws/sup...etailed/updateservice/xperia-play?cc=gb&lc=en
Before asking for help
i have narrowed it down to the computer not recognising the phone when it is off(blue light mode) i looked at device manager, says there is no driver for S1boot fastboot?
driver are on program files > sony ericsson > pc companion > driver 32/64bit
check there and install them manually
or check the pc companion in sony ericsson menu on your phone and connect your phone and press install
then install pc companion and let it do his work installing the driver.
check my mtpapp thread if you need more detail
don't clear mtpapp (your apps should be ok btw)
Tried everything now, still nothing happens after i plug in usb cable whilst holding the back button, what is actually supposed to happen after this point, i get the blue light, nothing else.
rojach said:
Tried everything now, still nothing happens after i plug in usb cable whilst holding the back button, what is actually supposed to happen after this point, i get the blue light, nothing else.
Click to expand...
Click to collapse
When the light goes blue, you are connected in either bootloader or recovery mode. If your device is not detected, go to device manager and install the drivers manually
Sorry double post
Are you connecting the phone via a USB hub?
If you have many usb ports on your pc being used, try to disconnect a few and plug the phone directly to your pc.
I had this same issue and it happened because my stupid logitech keyboard keeps messing with my usb drivers everytime i plug in a new USB device.
I unplugged the keyboard and the update went swiftly.
In order to enter flash mode, you ought to:
1)switch off the phone
2)remove the SIM card and sdcard (this is mandatory!),
3)remove the battery for 5 seconds, then put it on.
4)hold the Back button while you connect the device.
The device will shine with a green light. The blue light is used for the Fastboot mode, and you get that light if you:
1) Switch off the device
2) Hold the Search button (the magnifying glass one)
3) connect the device to the USB cable.
Hi all, thanks for your help but still no luck, i have tried all of the above on 2 computers, the same problem occurs, not sure what is supposed to happen when i plug the USB into the phone whilst holding the back button during update? all i get is a blue light on the phones power button. Nothing appears on the pc either??? i have done a full factory reset and tried installing drivers, is there a specific driver for entering the recovery mode on xperia play?
Sony Update Issues
http://unlockbootloader.sonyericsson.com/instructions
Note: We have seen in some forums that customers unlocking the boot loader on their phones have experienced problems when they accept a FOTA (Firmware upgrade Over The Air) update. The issue has been reproduced and we are working on a solution. For customers that have unlocked the boot loader please do not accept the Firmware upgrade OTA.
i CAN't connect it with my pc and rsd lite can't detect my phone when i plugged it in!
also, i can't charge it via PC nor the power supply(i have tried using moto's one and a unofficial power supply)
but the most wired thing is i can charge it via an"portable battery"
maybe it is an hardware problem and i can't flash back to my official sbf
warranty is now void?
or can i flash a SBF without connect to PC?
give me a now hope plz
Have you tried the boot loader mode (forum.xda-developers.com/wiki/index.php?title=Motorola_Defy):
---------------------------------
How to get rsdlite to recognise a phone that won't boot
You flashed, something happened, now screen is black, phone doesn't react, u are in a boot loop, rsdlite cant recognize the phone. you're right here.
To get RSDLIte to recognize your phone you have to enter boot loader mode. this means press VOL-UP + POWER If nothing helps, try pushing VOL UP before!' you put the battery in (RSDLIte should be running and awaiting a new connection at that time) If you are using Windows 7, try seting RSDLite to "compatibility mode: Windows XP SP3".
i have tested the connection in bootmenu and RSDLITE not able to recognize my phone
any ideas?
Hello
Please somebody help me. My notebook doesn't recognise my DEFY via USB. More details: When I got the phone it worked but after a while not always. Sometimes it connected 5 minutes later but nowadays doesn't work at all. By the power charger it's charging normally.
When it's plugged to the computer, the phone's screen lights up, but doesn't connect or charge. If I tick on/off meanwhile the USB debug, the USB sign shows up but it's still not charging or connecting. (I've already tried all 4 options)
Moreover when I remove the USB cable, the USB signal doesn't disappear until I restart the phone or abort the USB in the application manager.
I've already tried to install or uninstall the driver (Moto Helper) but didn't help.
The main problem is that if I connect the phone to the notebook, the device manager doesn't see it. (I tried different computers, Win XP and Win 7)
I did a factory reset several times but nothing happened.
I think there was an automatic software update and maybe the problem started at this time.
This is my first Android phone and I'm not an expert so I really need your help.
I wanted to install a new ROM but the RSD lite doesn't see the phone neither in Bootloader mode. It says: "Connect USB Data Cable" and when I connect it says: "USB" so recognises something.
I'm trying to fix it for weeks but I can't find to solution.
System version: 34.177.3.MB525.Retail.en.GB
Build no: JOREM_U3_3.4.2_177-3
Win7 x64
Sorry about my English and thank you for your help.
I didn't mean bootmenu tommy, BOOTLOADER MODDE: press VOL-UP + POWER, try pushing VOL UP before! to get RSDLIte to recognize your phone(RSDLIte should be running and awaiting a new connection at that time)
---------- Post added at 09:52 PM ---------- Previous post was at 09:42 PM ----------
Hey poross, I guess that your problem seems like a virus activity or maybe a faulty USB cable. Try another USB cable and another PC (with a good antivirus running, indeed!). Before connecting to the new PC, reset your defy...
I just hope it helps. If not, maybe your defy has a hardware problem...
If you are using windows 7 make sure that you installed good drivers for system x86/x64. I'm using RSD on Windows 7 X64 and I have no problems with it. Check in device manager for some unknown devices after plug phone to USB. If system wont see any new device after plugging it wont be driver problem but something wrong with phone, usb cable or usb port. Even if driver fails system should see the phone like unknown device or something.
MMarv said:
I didn't mean bootmenu tommy, BOOTLOADER MODDE: press VOL-UP + POWER, try pushing VOL UP before! to get RSDLIte to recognize your phone(RSDLIte should be running and awaiting a new connection at that time)
---------- Post added at 09:52 PM ---------- Previous post was at 09:42 PM ----------
Hey poross, I guess that your problem seems like a virus activity or maybe a faulty USB cable. Try another USB cable and another PC (with a good antivirus running, indeed!). Before connecting to the new PC, reset your defy...
I just hope it helps. If not, maybe your defy has a hardware problem...
Click to expand...
Click to collapse
actually,i am in bootloader(versoin 9.10) and rsdlite still not able to detect my phone =..=
but i notice that when i plugged it in,the phone showed "transfer mode USB"
but nothing happened in rsdlite,no info of device properties.....
what the hell.....
To tommy:
Let's make a conclusion:
1-You have the correct drivers but RSDLite doesn't recognize your phone even in the bootloader mode
2-The charger can't charge your battery
3-The portable battery CAN charge it! (So the phone connector has no problem)
So: It is most likely that you've got a faulty usb cable
Thanks for dealing with my problem
Chamelleon: The device manager doesn't see anything while the cable is plugged but the phone detects something -probably the USB power- but doesn't connect at all. It happpens in the bootloader mode as well so detects the USB cable but it seems that the phone doesn't send sign to the computer. I haven't had any problem with USB detection, connection (except this phone) for a long time.
MMarv: You mean there's a virus on the phone? if it's the situation, installing a virusbuster to the phone could solve it? Which one is a good prog?
I tried with 3 different cables and still not working. With the wall plug charger and the car's USB socket are ok but none of them charges from the notebook.
poross said:
Thanks for dealing with my problem
Chamelleon: The device manager doesn't see anything while the cable is plugged but the phone detects something -probably the USB power- but doesn't connect at all. It happpens in the bootloader mode as well so detects the USB cable but it seems that the phone doesn't send sign to the computer. I haven't had any problem with USB detection, connection (except this phone) for a long time.
MMarv: You mean there's a virus on the phone? if it's the situation, installing a virusbuster to the phone could solve it? Which one is a good prog?
Click to expand...
Click to collapse
I mean Virus on your laptop. Hard reset your phone and try another PC with a good anti-virus installed!
So if cable is ok, usb port in pc and phone is ok it must be driver problem. Delete all what appears as Motorola driver including drivers from system32 and then install it again. You can also try to install it on different PC with 32 bit system. Do not install any unknown drivers, just install Motorola Media Link or Motorola Software Update cause if you have this one and some different it can be problem. Or you just have something wrong with system. First try on different pc with drivers from MML or MSU.
Succeeded.
The solution was incredibly simple. It was strange when I did a factory reset (4 times) and rebooted the phone it restored my acccounts, shortcuts, settings. I ticked off two things: settings/Privacy/Back up my data and Automatic restore. Then took out battery then I put it back and began the reset. After it the phone forgot really everything of my details and now the USB is working perfectly.
MMarv said:
To tommy:
Let's make a conclusion:
1-You have the correct drivers but RSDLite doesn't recognize your phone even in the bootloader mode
2-The charger can't charge your battery
3-The portable battery CAN charge it! (So the phone connector has no problem)
So: It is most likely that you've got a faulty usb cable
Click to expand...
Click to collapse
i tried another usb cable,but it still not able to connect.....
poross said:
Succeeded.
The solution was incredibly simple. It was strange when I did a factory reset (4 times) and rebooted the phone it restored my acccounts, shortcuts, settings. I ticked off two things: settings/Privacy/Back up my data and Automatic restore. Then took out battery then I put it back and began the reset. After it the phone forgot really everything of my details and now the USB is working perfectly.
Click to expand...
Click to collapse
not working for me =..=
however,i have 2ndinit installed
and after factory reset,the phone is still rooted and 2ndinit still here
so will it cause any problem?
Hey Tommy,
I nearly bricked my defy, and the battery was low too. RSDite not able to recognize it. It seemed that charger can't charge the battery either. But I was wrong. The charger was actually charging the battery. I removed the back cover with the charger connected and the battery in place. I tested the two outer connectors of the battery with a voltmeter (when the battery is in place, they are slightly exposed). Initially the voltage was about 3 volts and steadily increased... Test it if you can. If it is not charging, I bet that it is a phone connector problem. You should return it and I think they can repair it easily...
Hi Tommy1994
First I'm not an expert, this is my first android phone.
My probelm was (I think) an android error. I made factory reset 4 times but it always restored my details. (It's not a perfect FR). After it I did a bit different FR:
-1. in the normal android/ settings menu/Privacy/Back up my data -thick off. So it won't make any backup
-2. swich off the phone
-3. take the battery out for 30sec then put back
-4. press the volume down and hold it while you press the power on button but hold the volume down for more 4 sec. you will see an android robot with an exclamation mark.
-5. press the volume up and down together that's how you enter to the Recovery menu.
-6. first chose the "Wipe cache partition" (you can move with the volume buttons and select with the power button) -wait till "Cache wipe complete"
-7. then chose the "Wipe data/factory reset" - wait till "Data wipe complete"
-8. after these chose the "Reboot system now"
-9. if your phone doesn't want to start just get the battery out for 30sec and take back.
note: you will lose everything of your personal details, installed apps...
note2: it's my FROYO's (android 2.2.2) menu probably yours is different
Sorry for my English, hope you understand though.
hope this helps
If your are trying to connect on windows vista or 7 I think you must be loged on as admin of the computer. I had same problem but when I used windows XP it worked fine this is for rsd lite
going to try ,i really hope it will help
thx
i have flashed cm7 and still not able to connect it to PC
i am quite sure it is not software problem, maybe it is about the USB cable?
is that possible the USB cable can charge but not able to transfer data?
hi tommy1994 ,
i'm having the same problem as you, when i'm in the bootloader screen the rds lite program don't find my defy...
have you found any solution?
Thank you very much
I own an LG G2, i recently got this phone yesterday from a person on craiglist. Don't worry i didn't pay him i gave him my older phone i dont use anymore. SO This phone is practically stuck in Firmware Update (As i read that post) , i spent about a day and half figuring it out and what happens is that.
I CAN get into recovery its TWRP v2.7.0.0 by Turning off the phone first and then Holding Vol UP, Power, Vol Down at the same time until the LG Logo comes up and then i am still holding them down, and it says Recovery Mode please wait and bam TWRP.
But heres the problem i can't mount my OTG and i can't ADB Sideload. So what do i do from here?? this guy rooted this phone and soft bricked it i think? and he wiped the phone but i also did when i had the chance and wiped it completly via recovery.
The only way i got into "Download Mode" / "Firmware Update" was to take the back cover off and unscrew a few screws on the side and unclip the battery for a few seconds and then plugged it back in and then I held the VOl UP button and plugged my USB into the phone and the other end is in my PC. My phone says "Download Mode please wait" and then prompted with the Firmware Update screen. BUT my pc doesnt detect the phone whatso ever and i've already installed drivers and etc from this forum ( http://forum.xda-developers.com/showthread.php?t=2432476 ) its the 2015 method that i downloaded.
so what do i have to do, i havent tried using different usb cables, the port seems fine to be plugged in since in TWRP it says 84+ so i meant its charging right? help me out guys idk what else to do or flash or anything.
IAmTechFreq said:
I own an LG G2, i recently got this phone yesterday from a person on craiglist. Don't worry i didn't pay him i gave him my older phone i dont use anymore. SO This phone is practically stuck in Firmware Update (As i read that post) , i spent about a day and half figuring it out and what happens is that.
I CAN get into recovery its TWRP v2.7.0.0 by Turning off the phone first and then Holding Vol UP, Power, Vol Down at the same time until the LG Logo comes up and then i am still holding them down, and it says Recovery Mode please wait and bam TWRP.
But heres the problem i can't mount my OTG and i can't ADB Sideload. So what do i do from here?? this guy rooted this phone and soft bricked it i think? and he wiped the phone but i also did when i had the chance and wiped it completly via recovery.
The only way i got into "Download Mode" / "Firmware Update" was to take the back cover off and unscrew a few screws on the side and unclip the battery for a few seconds and then plugged it back in and then I held the VOl UP button and plugged my USB into the phone and the other end is in my PC. My phone says "Download Mode please wait" and then prompted with the Firmware Update screen. BUT my pc doesnt detect the phone whatso ever and i've already installed drivers and etc from this forum ( http://forum.xda-developers.com/showthread.php?t=2432476 ) its the 2015 method that i downloaded.
so what do i have to do, i havent tried using different usb cables, the port seems fine to be plugged in since in TWRP it says 84+ so i meant its charging right? help me out guys idk what else to do or flash or anything.
Click to expand...
Click to collapse
I think the methods leave out that you need to change your phone to com port 41 on device manager > ports in order to be detected. Then you need to unplug it and reconnect to computer when the program shows waiting for device, with the phone in download mode already.
Also, to get to recovery you hold vol down and power, when the LG logo comes up release power and hold it again until the reset screen comes up.
To get to download mode you turn the phone off then hold up while plugging the USB cord in with it connected to pc... This launches download mode.
Sent from my LG-VS980 using XDA Free mobile app
Yoinx said:
I think the methods leave out that you need to change your phone to com port 41 on device manager > ports in order to be detected. Then you need to unplug it and reconnect to computer when the program shows waiting for device, with the phone in download mode already.
Also, to get to recovery you hold vol down and power, when the LG logo comes up release power and hold it again until the reset screen comes up.
To get to download mode you turn the phone off then hold up while plugging the USB cord in with it connected to pc... This launches download mode.
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
Well you see man , I cant change anything in Device Manager since my phone isn't being detected. It didn't install drivers fully fully since my phone isnt recognized. Even in TWRP or "Download Mode/ Firmware Update" Nothing happens no drivers installing or anything even but it does boot it up to that point....and its just normal boot up i see the LG logo and my led goes from green to blueish in a smooth transition and it doesnt stop until i turn it off. The method i got into recovery is holding all those buttons down its not a problem for me to get into it. I also have another problem it doesn't seem to want to mount my usb otg by samsung.
what do i do
So i tried the otg route but I can't mount it. I have everything connected and once I go into recovery to mount usb-otg, nothing happens.
I just need some way to get a ROM.zip in my phone
Computer does not recognize my phone.
Stuck at LG logo unless I enter recovery.
Sideload doesnt work.
OTG doesnt work.
I've tried at least 4 different guides with no luck.
Why don't you manually install drivers from online?
ive tried
tzzeri said:
Why don't you manually install drivers from online?
Click to expand...
Click to collapse
ive tried that already and it doesnt list anything from the LG folder.
I realized the phone will say start the adb sideload feature. so, when i put the "abd sideload file.zip" command on my pc i just wait a few minutes and it says daemon not running on port 5037 and then start successfuly and then error :device not found.
it can seem to reognize my device wether its in recovery, or download mode or fastboot mode.
Try again in other pc that has never been conected to an LG Phone before. It can perfectly be a conflict with drivers installed in the OS.
I've tried man
AFter i cleaned the usb port in one of the chats or forums, i waited a day ovbiously without turning on the phone and cleaned the usb port with alchohal and a q tip and i plugged my phone into my computer and my PC detected something but it only says "Unknown Device" everytime no matter what pc i use it says that. nothing else. but before that none of my pcs would detect theirs a phone plugged in at all.
IAmTechFreq said:
AFter i cleaned the usb port in one of the chats or forums, i waited a day ovbiously without turning on the phone and cleaned the usb port with alchohal and a q tip and i plugged my phone into my computer and my PC detected something but it only says "Unknown Device" everytime no matter what pc i use it says that. nothing else. but before that none of my pcs would detect theirs a phone plugged in at all.
Click to expand...
Click to collapse
Might be a problem with the cord
Sent from my Motorola DynaTAC using XDA Free mobile app
tzzeri said:
Might be a problem with the cord
Sent from my Motorola DynaTAC using XDA Free mobile app
Click to expand...
Click to collapse
No there is no problem with your USB cord or port. You need to do following steps.
http://forum.xda-developers.com/showthread.php?t=2432476
https://www.youtube.com/watch?feature=youtu.be&v=g01Pa7cgdSM&app=desktop
Please let me know if you succeed.
All credit goes to #bender_007
Yesterday i flashed my Jiayu S3 to lolipop (i tought) and i just bricked my phone!
After reboot it was just dead.. when i plug into pc with USB i hear the connect sound and after 2 seconds the disconnect sound. This keeps on going until i pull the USB plug. When i look in DeviceManager i see it refresh after every sound, but nothing pops up (unknown device or whatever). I deletet all usb drivers with usbdeview, restart pc but still no changes.
I tried with or without battery, but without it does nothing at all.. i tried holding Vol+ or - or both or with power button, but nothing.
Read some threads about unbrick and install correct usb driver for jiayu s3, but all the options they came with does not work on my device!
I'm a little despered now and don't know what to do.. i get the feeling that my 2 weeks old phone is dead? :'(
My pc has windows 7
Did the flash with SP Flashtool 5.1516
Did not untick preload in flashtool, i guess i got the wrong preload or something??
Please help!
No one..? :crying:
Lowrida said:
Yesterday i flashed my Jiayu S3 to lolipop (i tought) and i just bricked my phone!
After reboot it was just dead.. when i plug into pc with USB i hear the connect sound and after 2 seconds the disconnect sound. This keeps on going until i pull the USB plug. When i look in DeviceManager i see it refresh after every sound, but nothing pops up (unknown device or whatever). I deletet all usb drivers with usbdeview, restart pc but still no changes.
I tried with or without battery, but without it does nothing at all.. i tried holding Vol+ or - or both or with power button, but nothing.
Read some threads about unbrick and install correct usb driver for jiayu s3, but all the options they came with does not work on my device!
I'm a little despered now and don't know what to do.. i get the feeling that my 2 weeks old phone is dead? :'(
My pc has windows 7
Did the flash with SP Flashtool 5.1516
Did not untick preload in flashtool, i guess i got the wrong preload or something??
Please help!
Click to expand...
Click to collapse
so you cannot boot into recovery or fastboot either?
Lowrida said:
Yesterday i flashed my Jiayu S3 to lolipop (i tought) and i just bricked my phone!
After reboot it was just dead.. when i plug into pc with USB i hear the connect sound and after 2 seconds the disconnect sound. This keeps on going until i pull the USB plug. When i look in DeviceManager i see it refresh after every sound, but nothing pops up (unknown device or whatever). I deletet all usb drivers with usbdeview, restart pc but still no changes.
I tried with or without battery, but without it does nothing at all.. i tried holding Vol+ or - or both or with power button, but nothing.
Read some threads about unbrick and install correct usb driver for jiayu s3, but all the options they came with does not work on my device!
I'm a little despered now and don't know what to do.. i get the feeling that my 2 weeks old phone is dead? :'(
My pc has windows 7
Did the flash with SP Flashtool 5.1516
Did not untick preload in flashtool, i guess i got the wrong preload or something??
Please help!
Click to expand...
Click to collapse
Just flash it again, but this time with "Firmware upgrade " in SP Flashtool instead of "Download". Change from KK to LL needs reepartitioning, so firmware upgrade.
The reason why you don´t "see" the S3 any longer on the pc is, that the USB storage mode from KK, which is driverless for windows, don´t work right now on LL.
Once flashed to LL you will need to install a driver, for windows to connect to the S3.
@ Dior DNA:
No i can't. Phone does nothing with the buttons. Only diference if i hold Vol - then time from connect sound and disconnect sound is a little longer.. about 10 seconds. But still nothing happens.
@1testi:
Flashtools can't see my phone. I tried it a hundred times. With battery, without battery, with Vol - and with Vol +.
When i connect the USB cable i hear the connect sound and after 2 a 3 seconds i hear disconnect sound. This goes on and on until i pull the USB cable out. In devicemanager i see a refresh going on, but nothing pops up.
I'm realy despered on what to do now?
Lowrida said:
@1testi:
Flashtools can't see my phone. I tried it a hundred times. With battery, without battery, with Vol - and with Vol +.
When i connect the USB cable i hear the connect sound and after 2 a 3 seconds i hear disconnect sound. This goes on and on until i pull the USB cable out. In devicemanager i see a refresh going on, but nothing pops up.
I'm realy despered on what to do now?
Click to expand...
Click to collapse
Why the SP Flashtool isn´t working any longer? You didn´t deinstalled the driver, did you? Just try to flash again with "Firmware Upgrade".
I don´t know a way to reinstall the driver in windows without the preloader. The only thing you can do, as far as i know, is to use a linux
pc to flash again. Linux don´t need a driver for SPF, only some rules.
Lowrida said:
@ Dior DNA:
No i can't. Phone does nothing with the buttons. Only diference if i hold Vol - then time from connect sound and disconnect sound is a little longer.. about 10 seconds. But still nothing happens.
(
Click to expand...
Click to collapse
Booting into recovery or flashtool I meant regardless of pc and/or spflashtool.
If I recall correctly:
hold volup and power boots recovery
hold voldn and power boots flashtool
If you can boot recovery then which one is it? Maybe you can restore something or manually flash preloader bin from there.
After the flash i reboot and then the connect and disconnect sound appears. So i tried differend things, but could not connect. I wanted to flash again, but flashtool did not reconice the phone and nothing in DeviceManager. That's why i thought to remove the driver and try to re-install it. But that did not help..
Holding Vol - or + button with power button or both Vol buttons with power button does nothing.. i tried to hold all combinations at least 30 seconds, but nothing at all.
I have no Linux pc or any knowhow to make a Linux pc.. or a pc to install Linux on..
One last thing you can try: remove the battery, wait a little, insert the battery again. Hold vol+ key, keep holding it and press power
button, while still holding the vol+. If you don´t see anything happening then you bricked the phone.
You will need help from a professional or at least from someone with a linux machine, sorry.
I'll try that.
You have any idea what could have caused the brick?
As i wrote above, moving from KK to LL with wrong parameter "Download" in SPF.
....and a not working recovery.
You should try this method :
darmowyinternet.net/forum/temat-poradnik-jak-uruchomic-uceglony-telefon-po-wgraniu-zlego-romu-test-point_383
unfortunately you have to translate before
Ok i tried that site with google translate and i could a little make up what they are saying.
But that is a very drastically operation, and i would like to give it some other tries before dismantling my phone.
So i googled and googled.. came here: http://forum.xda-developers.com/showthread.php?t=889128
Had enough electronics lying around from my former 27mc hobby, so searched for the right resistors,
cut up a micro usb cable and give it a try... well.. nothing! Tried for about an hour and gave up.
Then i googled on Unbrick Jigs, but for what i read they are only for Samsung phones, so i gues the trick
with the resistors were also?
So googling again... came here: http://forum.xda-developers.com/showthread.php?t=2454004
Reading the tread and the comments, someone mentioned a download for "Mediatek Driver Auto Installer".
Downloaded that and installed the drivers. Plugged in my phone and... whoohoo!! Something is happening! :silly:
My devicemanager saw an "Alcatel single RNDIS interface". I unplugged and plugged my phone a few times to
be sure it was my phone. Sooo... one step further! :good:
Then i googled on this device.. came up with all sorts of network devices, not helpfull. Then googled on Jiayu with
this device. Came up with this tread: https://www.china-devices.com/topic...vcomm-drivers-onto-your-pc-win-7vistaxp-only/
It's a tread about bricked Jiayu G3 devices, but i thought, 'What the heck, lets give it a try!'.
I downloaded the "MTK Megapack - All Tools Here!" and unpacked. Wend back to device manager and manually updated the driver
of the Alcatel device. Show all devices - browse - wend to Megapack map and there were MTK drivers for the 65xx device.
And yess.. when i plug in my phone there's the device: " MTK USB Port (COM7) "
SP Flashtools sees my phone again! :good:
Tried to flash a stock preloader, but got an error: "BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) – [EMI] Enable DRAM failed!"
But for now that's a problem for tomorrow.. it's almost 2:30 and i have to got some sleep!
(sorry for the misspellings or telling things not clear, i'm tired and english is not my main language)
Grats!
You can google the error. This leds you in the right direction.
It's alive!!!!!! :laugh::silly::victory:
Because the kitkat stockrom i downloaded gave me the same error over and over i searched for something else.
So i downloaded TF Extreme lolipop 5.1 this morning and give it a try. And all went well. I pulled the usb plug and
pushed power button.. only vibration but nothing. Then pulled the battery and after few seconds put it back in
and try power again. Only 1 vibration.. then tried Vol + and - combinations but nothing. (dammn!)
Then plug the usb in and i saw the battery icon.. it was total empty! (because of a week trying).
So now it's charging and i hope it starts, can't wait!!
Thanx all for the effort in helping me out! :good:
Edit: Ok, so i could not wait and hit power! It shows green screen with Jiayu S3 logo and text "New Load". So i guess it's prepairing for first startup!
my s3 basic is not charging when on.. also when connected to pc thru usb, ipc shows device malfunctioning ,and there is no indication on phone..I try to connect to sp flash tool also no success..same error"usb device not recognized pops up every 2s.everything else is fine..Any method to upgrade to 5.1 now on official kk
Kinda need help, happened something similar
It happened something similar to me.
I flashed the whole ROM, bootloader included, I was very sure that my model, Jiayu S3 3GB ROM + 32GB RAM, was the correct, but still bricked my phone.
There's no problem at all when I plug it into my PC, I installed the lastest MTK drivers on windows 10, having to disable the signature enforcement.
The problem comes when I start flashing. I only mark the bootloader, then I press "Download" (on the lastest version of SP Flash Tools), and plug the phone, with the battery in it (I've tried without battery, pressing all possible combinations and does nothing), when I plug it in with the battery and pressing no buttons, the driver is detected as MTK USB Port. That's a good thing I guess. But It does not pass from the red bar, and gives me the known error "Enable DRAM Failed".
I've tried to google any possible solutions, reinstalling other version of the MTK drivers, on different versions of Windows, with other versions of official ROMs, and the result is always the same.
The only thing that's left to try is flashing it with an Ubuntu machine, which is something I do not expertise to be honest, but I'm gonna gather some info and try to do it.
However, if someone has any idea of what I might be doing wrong (excluding the part when I flashed the bootloader, I'll never do it again), I would be really grateful for any kind of help.
Thank you!
Kiei said:
It happened something similar to me.
I flashed the whole ROM, bootloader included, I was very sure that my model, Jiayu S3 3GB ROM + 32GB RAM, was the correct, but still bricked my phone.
There's no problem at all when I plug it into my PC, I installed the lastest MTK drivers on windows 10, having to disable the signature enforcement.
The problem comes when I start flashing. I only mark the bootloader, then I press "Download" (on the lastest version of SP Flash Tools), and plug the phone, with the battery in it (I've tried without battery, pressing all possible combinations and does nothing), when I plug it in with the battery and pressing no buttons, the driver is detected as MTK USB Port. That's a good thing I guess. But It does not pass from the red bar, and gives me the known error "Enable DRAM Failed".
I've tried to google any possible solutions, reinstalling other version of the MTK drivers, on different versions of Windows, with other versions of official ROMs, and the result is always the same.
The only thing that's left to try is flashing it with an Ubuntu machine, which is something I do not expertise to be honest, but I'm gonna gather some info and try to do it.
However, if someone has any idea of what I might be doing wrong (excluding the part when I flashed the bootloader, I'll never do it again), I would be really grateful for any kind of help.
Thank you!
Click to expand...
Click to collapse
Oeps it might be the same problem with the 32GB version as I have.
See http://forum.xda-developers.com/showpost.php?p=68036678&postcount=295
I am waiting for a stock ROM backup.
I have learned to never flash the original preloader again.
xtyphoon said:
Oeps it might be the same problem with the 32GB version as I have.
See http://forum.xda-developers.com/showpost.php?p=68036678&postcount=295
I am waiting for a stock ROM backup.
I have learned to never flash the original preloader again.
Click to expand...
Click to collapse
You're right, with the 32GB rom version (which is still unavaliable for public use) it worked! I still got it here, so anyone feel free to ask me the link too.
Thanks to xtyphoon and Dior DNA and everyone who made this possible, if you ever come to Girona city, I'll buy you a drink ;D
Kiei said:
[...]if you ever come to Girona city[...]
Click to expand...
Click to collapse
I was around there few weeks ago