Related
Hi Guys,
I am a new Note 4 user, I've had note 2 before. Recently I have used Z3, OneplusOne and S5, which in my opinion other than the S5, the phones were smooth and laggieness was non existence. I have since changed to the Note 4 and immediately I have realised that even in the kitkat (currently running lollipop) that the phone lags when changing between the programs, turning on the camera, or even after a picture has been taken it takes a while to get to respond. Hardwar-wise I believe the Note 4 is very respective and I can only blame this on the software. I have since upgraded to lollipop and I must say the performance is no different than before. Could anyone tell me without rooting and installing a modified rom, is there a way to increase the smoothness of the phone? it is because of the bloatware? how to de-bloat? or is it just how it is?
Thanks
Patrick
the better is a clean installation and after that come back and report any issue's
Thanks vagenrider but this issue was already apparent when I first used the phone right out of the box and noticed the lag.
pplwu said:
Thanks vagenrider but this issue was already apparent when I first used the phone right out of the box and noticed the lag.
Click to expand...
Click to collapse
hi,
I can say this,
that i had my Note4 (N910F rooted, stock Rom.) since October 2014 till now.
Overall i had little or no "lag" of note. (apart from Recent button plus an setting issue.. minor )
Over this period of time, if i found/noticed a bit of "lag" and i found culprit, causing the problem, I would uninstall app,
i also noticed, so far that it has always been a 3rd party (badly coded.. or on lollipop the app was not "playing" nicely.. etc etc)
So overall.... when i was on Android v 4.4.4 or now on Lollipop my device has been working fine.. battery use, been good, very, very smooth
So all i can say, if you have issues it is either you have a faulty device or an app/combination of apps causing lag.or setting issue
I have stated this, in many of my post that i have following devices.. on hand
Note 4, Note 3,Note 8.0 (tab) Note 2 and they all running fine..( 100% satisfaction)
Bottom line
is that i think i am in a good position to state that my Note 4 compares 100%plus, with my Note3(which is a very very, good device, smooth no lag, etc etc)
Above is just my opinion and i hope that you can sort out your device
Good luck
pplwu said:
Hi Guys,
I am a new Note 4 user, I've had note 2 before. Recently I have used Z3, OneplusOne and S5, which in my opinion other than the S5, the phones were smooth and laggieness was non existence. I have since changed to the Note 4 and immediately I have realised that even in the kitkat (currently running lollipop) that the phone lags when changing between the programs, turning on the camera, or even after a picture has been taken it takes a while to get to respond. Hardwar-wise I believe the Note 4 is very respective and I can only blame this on the software. I have since upgraded to lollipop and I must say the performance is no different than before. Could anyone tell me without rooting and installing a modified rom, is there a way to increase the smoothness of the phone? it is because of the bloatware? how to de-bloat? or is it just how it is?
Thanks
Patrick
Click to expand...
Click to collapse
I am having the same issues with my device. I've had it with both lollipop and KK. I've had multiple ROMS (all stock). I've done fresh installs, cleaned cache, disabled apps, and completely run with none of my apps installed. All the same issues, as you've mentioned. I'm thinking of returning my note 4 if they don't fix it by 5.1.1 or August. This device cost way too much for these kinds of issues... :-\
zkyevolved said:
I am having the same issues with my device. I've had it with both lollipop and KK. I've had multiple ROMS (all stock). I've done fresh installs, cleaned cache, disabled apps, and completely run with none of my apps installed. All the same issues, as you've mentioned. I'm thinking of returning my note 4 if they don't fix it by 5.1.1 or August. This device cost way too much for these kinds of issues... :-\
Click to expand...
Click to collapse
pplwu said:
Hi Guys,
I am a new Note 4 user, I've had note 2 before. Recently I have used Z3, OneplusOne and S5, which in my opinion other than the S5, the phones were smooth and laggieness was non existence. I have since changed to the Note 4 and immediately I have realised that even in the kitkat (currently running lollipop) that the phone lags when changing between the programs, turning on the camera, or even after a picture has been taken it takes a while to get to respond. Hardwar-wise I believe the Note 4 is very respective and I can only blame this on the software. I have since upgraded to lollipop and I must say the performance is no different than before. Could anyone tell me without rooting and installing a modified rom, is there a way to increase the smoothness of the phone? it is because of the bloatware? how to de-bloat? or is it just how it is?
Thanks
Patrick
Click to expand...
Click to collapse
About debloating:
Without root you cannot really debloat the rom. You can only try to holding every app you don't need and drag&drop on touch wiz launcher and drag&drop it to "app details". New window with details will be prompted and you can delete or deactivate the app. This is everything you can do on stock to debloat.
About the main problem:
Also here without root and custom rom I could only suggest to try following:
Go to Settings app.
Scroll down to device information.
Tap few times (I think 5 times shoul it be) on build number to activate developer options.
Go back to main screen of settings, scroll down to developer options and open them.
So from here you can try to change following values:
- Force GPU rendering
- Turn off hardware overlays
- lower values for animations (all three) or just set them to zero if you don't need them. That gives really bounce speed (but mainly just for eyes, it doesn't really chages overall performance of device, just little bit maybe)
The nagtive thing of GPU and harware overlay is little bit higher the battery drain then usual.
vbaschen said:
About debloating:
Without root you cannot really debloat the rom. You can only try to holding every app you don't need and drag&drop on touch wiz launcher and drag&drop it to "app details". New window with details will be prompted and you can delete or deactivate the app. This is everything you can do on stock to debloat.
About the main problem:
Also here without root and custom rom I could only suggest to try following:
Go to Settings app.
Scroll down to device information.
Tap few times (I think 5 times shoul it be) on build number to activate developer options.
Go back to main screen of settings, scroll down to developer options and open them.
So from here you can try to change following values:
- Force GPU rendering
- Turn off hardware overlays
- lower values for animations (all three) or just set them to zero if you don't need them. That gives really bounce speed (but mainly just for eyes, it doesn't really chages overall performance of device, just little bit maybe)
The nagtive thing of GPU and harware overlay is little bit higher the battery drain then usual.
Click to expand...
Click to collapse
Thanks for that!! I've just done the above, will use this setting for a while and see how it goes.
Hi Guys, after applying vbaschen's suggestion I believe the phone has improved in terms of window changing and smoothness in operation. Battery discharge hasn't affected me that much given the battery has always lasted an entire day of heavy use and I plug it in everynight. I would recommend this quick mod. Thanks again vbaschen.
vbaschen said:
About debloating:
Without root you cannot really debloat the rom. You can only try to holding every app you don't need and drag&drop on touch wiz launcher and drag&drop it to "app details". New window with details will be prompted and you can delete or deactivate the app. This is everything you can do on stock to debloat.
About the main problem:
Also here without root and custom rom I could only suggest to try following:
Go to Settings app.
Scroll down to device information.
Tap few times (I think 5 times shoul it be) on build number to activate developer options.
Go back to main screen of settings, scroll down to developer options and open them.
So from here you can try to change following values:
- Force GPU rendering
- Turn off hardware overlays
- lower values for animations (all three) or just set them to zero if you don't need them. That gives really bounce speed (but mainly just for eyes, it doesn't really chages overall performance of device, just little bit maybe)
The nagtive thing of GPU and harware overlay is little bit higher the battery drain then usual.
Click to expand...
Click to collapse
Right on. I was going to recommend reducing the animation values as well as that is usually the case. Hope it helped!
Androidious said:
Right on. I was going to recommend reducing the animation values as well as that is usually the case. Hope it helped!
Click to expand...
Click to collapse
I went for a completely different solution: the Note 4's Snapdragon cpu has the bad habit of heating up very quickly. Two or three minutes of heavy usage (gaming/emulation, or worst: piles of file operations, e.g. media scanner) make it shoot up to 85° C. To prevent serious damage, the cpu is then automatically scaled down to extremely low values, which results in abysmal performance. When I first unboxed my N910F and inserted my old sdcard, the media scanner went haywire because my sdcard was faulty (works alright in my old Note 2, but the Note 4 is picky). The phone quickly got too hot to even touch, ran sluggish as hell (AnTuTu scores between 24000 and 29000), then shut itself down. :crying:
After I had replaced the sdcard, things got better, but only when I didn't put too much load on the phone: 52000 AnTuTu points in the morning (first thing to do with the cold phone), but getting worse steadily until I couldn't score more than 43000 points.
Now, after a lot of fiddling and tweaking (Kitkat, Lollipop, Stock, Custom, CM 12.1), I finally settled for (Lollipop) Emotion Revolution R8 ROM along with the Emotion nightly kernel (r17) and (most important) Synapse kernel tweaker. Instead of overclocking the blasted thing even more, I actually downclocked it one step (2572,8 MHz). The result: a rock stable phone that actually runs way better than with the higher (stock) clock rate. The cpu hardly ever scratches 70° C, and usually stays around 65° C even when I run demanding apps like PPSSPP, Dosbox, or Real Racing 3 (don't like that one, but it beats the s**t out of the cpu - 85° with stock cpu clock!). AnTuTu scores reach about 51500 - almost as much as with stock clock rate - but several times in a row now, with no performance hit. So, even though the peak performance may be one or two percent lower, I can run my phone for hours without any performance drops. Oh, and it's good for battery life, of course. :good:
So, if you're rooted, you may want to give it a shot. :fingers-crossed:
After using Galaxy S4 (I9500GT) for almost an year with lollipop, I recently shifted to Note 3 (SM-N9000). As S4 was a perfect companion performance wise, even in Power-Saver, I was expecting Note 3 be atleast the same if not better. However, I am facing a few issues mentioned below:
In Multiwindow mode, the video sometimes lag when I focus on other application. Then I need to restart the phone.
Sometimes while in fullscreen, with no heavy app in background (I play no Asphalt or Modern Warfare), my video starts lagging heavily.
Sometimes there is a slight Audio/Video sync issue.
I do not know what to do. Power-Saver turned off-on-off several times, no positive results.
The same never happened in my S4
NOTE:
I keep on changing ROMs, but I always clear everything and this happened on stock which I flashed through ODIN with "Erase NAND" enabled. So this is always a fresh install.
Please help
Also guide me on one thing. As I have used Samsung for years, I now know which apps to safely disable. On TouchWiz-Lolly, I disable almost 50 apps on my Note 3(like I used to do on my S4). So it is quite lag-free overall(except videos). Now I am getting a SoT of around 6.5-7.5 hours with 30-50% brightness. Disable every useless TouchWiz feature like sensors
I do not use location frequently, and keep switching between WiFi and 2G(Yes, 2G).
Is this battery performance decent, or do I need any more tweaks?
Thank You So Much For Reading
I use nova launcher, its way faster then stock samsuck.
Disable all animation, they add lag.
Video-Use MXplayer with hard acc ON, and same for bsplayer.
Regarding app , you mean unckeck from startup( like msconfig on PC) or disabled from ALL/APP?
From all/app disable only crappware like: yahoo new, bloomberg or something.
On startup app you need to unckeck them, with android tuner. Disable all games, and apps that do not need them in memory ram.
Even my tegra 2 asus sl101 tablet get some lag on video , but with hardware acc ON is quite ok.
My n9005 with lollipop is identical with wife n9005( 4.3 android) except one: lollipop start videos faster, in any video app.
Disabled from All Apps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Available @ Gearbest for $149.99
So I saw the watch and was intrigued. I'm not expecting greatness, just more so something fun to play with. Has anyone else played with the Kospet Hope? or Optimus Prime? Anyone going to buy the Prime?
Specs:
Processor: MTK6739 1.25GHZ (Quad Core)
Operating System: Android 7.1.1
Display: 1.6" inch IPS LCD 400x400
Memory::32 GB ROM + 3 GB RAM
Battery: 1260 Lithium Polymer Battery
Sensors: Heart Rate Monitor, Pedometer, GPS
Camera(s): 5.0MP (2.0MP software update) Side:8.0MP (5MP software update)
BODY RESISTANCE: IP67 Water Proof
CONNECTIVITY
SIM Slot: Yes Nano SIM GSM 850/900/1800/1900MHz WCDMA 900/2100MHz
WIFI: Yes WIFI 802.11b/g/n
NFC: none
Bluetooth: Bluetooth version: V4.0
USB: none
BODY
Size: 28.00 x 5.08 x 1.85 cm
Weight: 0.0830 kg
Casing: Ceramic
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
UPDATES:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
So I've had a couple days to play with it. Here are my thoughts.
1: Mine came with what appears to be a bubble in the glass layers, and some chips in the bezel around the glass.
2: The watch is much lighter than I thought it would be for being so large.
3: Text can be small, but is still quite readable.
4: Things are resized for this watch's screen resolution. (It's Android OS, not Wear OS) When installing an application, some of the options (accept, install, yes, no), barely show up on the screen.
5: Build quality seems on par with the price. It's not "cheap" feeling, but also not "quality."
6: The camera quality is on par with what you'd expect for a camera put into a watch. It records as well as takes still pictures.
7: It's definitely snappier than my TicWatch Pro LTE for menu and most navigation, however there are some times when it doesn't shine as well (like when just trying to log in to my gmail account).
8: Battery life right now with installing apps, usage, screen going on and off, wifi on, bluetooth on, no sim, gps off, I'm at 93% (6 hours of I'd say heavy use with installing apps and setup).
9: The screen is VERY bright, but has the ability to dim it like a phone.
10: There are 11 watch faces built in. Most of the options are quite ugly but also contain some "transformer " looking options (I guess this goes with the "Prime" aspect of it.
11: You can set it to either metric or imperial measurements for your fitness tracking
12: The app that you can download for it is called WiiWatch (No relation to Nintendo I'm sure). It really only just shows your fitness tracking data and has a few settings.
The packaging is interesting, every box has Kospet on it. It comes with a screw driver, as well as additional screw(s), a screen protector, a charger + usb cable. I'd like to add that the usb cable plugging into the charger does not go in all the way, as well as the watch resting on it doesn't always make the best connection.
Current Photos: https://photos.app.goo.gl/NUMauknhWG6d5m8w5
I've just bought it...
When I get it I can leave some insights if you want.
It's a great watch build quality super, the only thing it's font size on notification and the browser, install setting search and change the font size to large, leave the display size as it's. Good looking watch
duanim said:
It's a great watch build quality super, the only thing it's font size on notification and the browser, install setting search and change the font size to large, leave the display size as it's. Good looking watch
Click to expand...
Click to collapse
Have you received it already? Mine says it was shipped today, so it will still take a few weeks I guess.
Is it well synchronized with your phone? Do you receive all the notifications from Messenger and Whatsapp without delays?
You have to share you internet connection in order to have those right? You share it from bluetooth?
Also, how's it in terms of battery life?
Thanks in advance!
I have received it. I didn't wear it for the weekend, and when I came back (after ~50h), it still had 50% of battery left. It gets the notifications via Bluetooth, dismissing them dismisses them only from the watch. I don't know if they are actionable. Then it disconnected and I stopped getting them, but oh well, at least it shows the time.
How do I install Wear OS on this thing? The original software is... ugh. On the watch you have just Android 7, but the phone app is typical Chinese sh*t with no settings and almost no functionality (just to disable some apps form sending notifications, view fitness data, battery level and download watchfaces with no search/sort options ). Doesn't let you configure anything on the watch remotely (and I don't like watch touchscreens that much...)
When I won the battle of enabling google assistant on the watch, and asked it to turn on the lights, it... googled the phrase. Even though it's the same account as I use everywhere else.
DrG0nz0 said:
Have you received it already? Mine says it was shipped today, so it will still take a few weeks I guess.
Is it well synchronized with your phone? Do you receive all the notifications from Messenger and Whatsapp without delays?
You have to share you internet connection in order to have those right? You share it from bluetooth?
Also, how's it in terms of battery life?
Thanks in advance!
Click to expand...
Click to collapse
i did return mine because it have some dust debris between the display and i don't like Gear..****. So they don't have the watch anymore in stock, that is what they
said and they will give me the money back loosing expending $10 more in the transaction . so i did decide to buy the Lemfo Lem10 3/32Gb for $125 .
The Prime its pretty build quality and good looking,for me the downside was the resolution 400x400 for 1.6" inches display still the font size too small and for outdoors purpose the IPS display wasn't really good like the Zeblaze Thor Pro 3g Android 5.1, year old device.
Don't install or use the Wiiwatch companion app, instead use Watchdroid app its much better, yes you will get all the notification with more features and everything with Bluetooth connection, don't need for internet sharing. Go to Discouse Fullandroid watch.com and you will find all kinds of information.
duanim said:
i did return mine because it have some dust debris between the display and i don't like Gear..****. So they don't have the watch anymore in stock, that is what they
said and they will give me the money back loosing expending $10 more in the transaction . so i did decide to buy the Lemfo Lem10 3/32Gb for $125 .
The Prime its pretty build quality and good looking,for me the downside was the resolution 400x400 for 1.6" inches display still the font size too small and for outdoors purpose the IPS display wasn't really good like the Zeblaze Thor Pro 3g Android 5.1, year old device.
Don't install or use the Wiiwatch companion app, instead use Watchdroid app its much better, yes you will get all the notification with more features and everything with Bluetooth connection, don't need for internet sharing. Go to Discouse Fullandroid watch.com and you will find all kinds of information.
Click to expand...
Click to collapse
Thanks so much for the tips man!!
With all syncronized did you get an estimative on the battery before sending it back?
DrG0nz0 said:
Thanks so much for the tips man!!
With all syncronized did you get an estimative on the battery before sending it back?
Click to expand...
Click to collapse
no much time to play ,i did return it in 3 days after
I'll be making updates to the original post as I dig in some more.
Just came back from a hol in the states and met this watch on my desk. Nice build quality and as previously mentioned not as light as the size would suggest. Just installing apps on it now. Will get back on how it's going.. I have been using it pretty hevily and i have already drained 60% of power after 5 hours.. Not sure if this is acceptable but i can't keeep my hands off the thing so the display has been on for a fair while each time. Incidently, the battery came 100% charged.
shepscrook said:
I'll be making updates to the original post as I dig in some more.
Click to expand...
Click to collapse
any new reports from the last days?
A friend of mine already got it in England and he says that if you are using the WatchDroid app also the battery drains a lot!
Also, he says that it keeps disconecting, he needs to open the app on the watch to get all the notifications. Do you relate to any of this?
DrG0nz0 said:
any new reports from the last days?
A friend of mine already got it in England and he says that if you are using the WatchDroid app also the battery drains a lot!
Also, he says that it keeps disconecting, he needs to open the app on the watch to get all the notifications. Do you relate to any of this?
Click to expand...
Click to collapse
Not entirely sure this is down to WatchDroid though I have uninstalled it now myself. My battery drain was mainly down to the Wifi adapter being enabled. this has definately been an issue with previous versions of the Kospet watch range and I suspect this may not have changed here. I was down to 50% battery within half a day with Wifi enabled.. Having disasbled it i am easily getting the best part of 2 plus days out of it with moderate use and disabling Wifi when not using it.
kingtendo said:
Not entirely sure this is down to WatchDroid though I have uninstalled it now myself. My battery drain was mainly down to the Wifi adapter being enabled. this has definately been an issue with previous versions of the Kospet watch range and I suspect this may not have changed here. I was down to 50% battery within half a day with Wifi enabled.. Having disasbled it i am easily getting the best part of 2 plus days out of it with moderate use and disabling Wifi when not using it.
Click to expand...
Click to collapse
We found a solution in this forum:
https://discourse.fullandroidwatch.com/t/the-kospet-prime-official-post/50234/200
Apparently he doesn't "like" to have the WiiWatch and watchdroid on at the same time....once he deactivated all the WiiWatch services it's all good...
I'm still waiting to receive mine, it's been on Amsterdam wearhouse for a couple of days, smoking one out I guess...
Short review after a few days of use - Kospet PRIME
I am advanced user of the smartwatches since the first generation of Galaxy GEAR watch from SAMSUNG (SM-V700) with custom rom (full android)
It would be great to have similar watch with current up-to-date hardware - main request is to keep the camera placement facing outwards (on the body of the watch, not on the belt) to ensure that watch is water tight to 50 meters (at least to allow swimming/snorkeling with it – see Sunto watches for good water tight specs)
For Kospet Prime – Watch is nice but I have following (software) problems:
1. cradle connection sound would be nice to have – for now it is not sure that it is really well connected and charging
2. charging icon is displayed but too short time – please display it for longer or for whole time when watch is connected to the cradle
3. lack of ability to customize buttons (especially down button for camera operation for example
4. lack of configurable default applications screen – by sweeping right – after the list (or “apple style” apps icons) there should be possible to select 6-9 application shortcuts in the screen
5. lack of quick dial contact list (I need to be able to dial quickly to 6 or 9 contacts – activate call on the main phone when watch is in airplane mode, and activate call on the watch with SIM active
6. switching from round to square screen make the menu list invisible (ok after restart)
7. swipe up shall be customizable – instead of default sport application it should be configurable – for example to launch camera
8. temperature on the default watch screen is updated, however with delay (only when weather check is done)
9. video on the main camera is recorded VERTICALLY ???!!! WHY not horizontally ???
10. COMMUNICATION WITH PHONE when with watch in the “airplane mode” but with BT/wifi on - to see incoming calls notifications – who is calling. When (Connected normal big Android phone) phone is ringing – this shall be improved – please start to work with company Lumatic Software - and integrate/optimize well their application “Watch Droid” - in general please be more aware of the real use of the watch – in most cases watch is used WITH close integration with large phone (like Samsung NOTE10+) and all messages from phone shall be displayed on the watch, it should be possible to start phone calls from watch but ON THE PHONE with BT headset connected, so for example when You are riding the bike, there is no need to take big phone out from the pocket- You start the phone call from the watch, and talk over BT headset. Phone functionality in the watch itself is used only from time to time – for example if somebody goes to run or goes to the beach (that is why 5atm water tightness is needed) – just to be able to make quick phone call from the watch, without taking “big” phone on the run. In general – please copy the behavior (and stability ) of the Samsung watches, just keep the camera ..
11. Please allow to disable animation for time display – If somebody want to have quick look – it takes time the watch “stabilize” and shows real time
12. Screen on rising – works with delay – it is not stable for all the time
13. Default setup is missing calculator application.
14. temperature on the default watch screen is updated, however with delay (only when weather check is done)
15. contacts are displayed by first name instead of last name – I did not find the way to switch this setting for last name first
16. For desktop adaptation and functionality – please try to allow configuration as in NOVA LAUNCHER – to be able to set icons as needed, enable swipe actions, etc.
Hardware upgrade requests for “ideal watch”:
- 5 atm water tight – please make such watch really water tight to allow to swim/dive with it
- Cameras shall be placed at 12 hour Instead of 3 and face outwards (same as on SM-V700 Samsung watch) with second camera front facing.
- Camera shall record video in horizontal mode PLEASE!!!!
- Camera quality – please use 5MP camera sensor with good low light quality – there is no need for too many megapixels, but the camera shall offer good quality
- Two more customizable buttons on the left of the watch to launch custom applications quickly
- Wireless charging
- Reliable pulse/ecg measurement
lukasz said:
I am advanced user of the smartwatches since the first generation of Galaxy GEAR watch from SAMSUNG (SM-V700) with custom rom (full android)
It would be great to have similar watch with current up-to-date hardware - main request is to keep the camera placement facing outwards (on the body of the watch, not on the belt) to ensure that watch is water tight to 50 meters (at least to allow swimming/snorkeling with it – see Sunto watches for good water tight specs)
For Kospet Prime – Watch is nice but I have following (software) problems:
1. cradle connection sound would be nice to have – for now it is not sure that it is really well connected and charging
2. charging icon is displayed but too short time – please display it for longer or for whole time when watch is connected to the cradle
3. lack of ability to customize buttons (especially down button for camera operation for example
4. lack of configurable default applications screen – by sweeping right – after the list (or “apple style” apps icons) there should be possible to select 6-9 application shortcuts in the screen
5. lack of quick dial contact list (I need to be able to dial quickly to 6 or 9 contacts – activate call on the main phone when watch is in airplane mode, and activate call on the watch with SIM active
6. switching from round to square screen make the menu list invisible (ok after restart)
7. swipe up shall be customizable – instead of default sport application it should be configurable – for example to launch camera
8. temperature on the default watch screen is updated, however with delay (only when weather check is done)
9. video on the main camera is recorded VERTICALLY ???!!! WHY not horizontally ???
10. COMMUNICATION WITH PHONE when with watch in the “airplane mode” but with BT/wifi on - to see incoming calls notifications – who is calling. When (Connected normal big Android phone) phone is ringing – this shall be improved – please start to work with company Lumatic Software - and integrate/optimize well their application “Watch Droid” - in general please be more aware of the real use of the watch – in most cases watch is used WITH close integration with large phone (like Samsung NOTE10+) and all messages from phone shall be displayed on the watch, it should be possible to start phone calls from watch but ON THE PHONE with BT headset connected, so for example when You are riding the bike, there is no need to take big phone out from the pocket- You start the phone call from the watch, and talk over BT headset. Phone functionality in the watch itself is used only from time to time – for example if somebody goes to run or goes to the beach (that is why 5atm water tightness is needed) – just to be able to make quick phone call from the watch, without taking “big” phone on the run. In general – please copy the behavior (and stability ) of the Samsung watches, just keep the camera ..
11. Please allow to disable animation for time display – If somebody want to have quick look – it takes time the watch “stabilize” and shows real time
12. Screen on rising – works with delay – it is not stable for all the time
13. Default setup is missing calculator application.
14. temperature on the default watch screen is updated, however with delay (only when weather check is done)
15. contacts are displayed by first name instead of last name – I did not find the way to switch this setting for last name first
16. For desktop adaptation and functionality – please try to allow configuration as in NOVA LAUNCHER – to be able to set icons as needed, enable swipe actions, etc.
Hardware upgrade requests for “ideal watch”:
- 5 atm water tight – please make such watch really water tight to allow to swim/dive with it
- Cameras shall be placed at 12 hour Instead of 3 and face outwards (same as on SM-V700 Samsung watch) with second camera front facing.
- Camera shall record video in horizontal mode PLEASE!!!!
- Camera quality – please use 5MP camera sensor with good low light quality – there is no need for too many megapixels, but the camera shall offer good quality
- Two more customizable buttons on the left of the watch to launch custom applications quickly
- Wireless charging
- Reliable pulse/ecg measurement
Click to expand...
Click to collapse
Thanks for the updates!!
From what I could gather, most of your problems can be solved if you install WatchDroid instead of WiiWatch and also put on a launcher (can't remember the name now). Don't forget that this is a fully-fledged android so we can tweak around all we want...
DrG0nz0 said:
Thanks for the updates!!
From what I could gather, most of your problems can be solved if you install WatchDroid instead of WiiWatch and also put on a launcher (can't remember the name now). Don't forget that this is a fully-fledged android so we can tweak around all we want...
Click to expand...
Click to collapse
its going to be two years until we get something like that, i wish and we hope
:good:
duanim said:
its going to be two years until we get something like that, i wish and we hope
:good:
Click to expand...
Click to collapse
I am already waiting 5 years since SM-V700 Galaxy gear watch... but I do not think that it will take that long right now - in fact it is jut the redesign of the watch case to move the camera to the top of the watch, and I hope that this new chassis will also be redesigned to feature 5atm water tightness. The rest of the watch is quite good - battery capacity in PRIME is 4 times!!! the capacity of SM-V700 (1260 vs 315 mAh) I have made custom setup for the watch and thanks to Watch Droid application in the v9.1.19.9 version (previous than the version available now in Playstore) it is possible to integrate watch with the android phone quite well.
I will try to publish YT video about it.
Are there any other forums I can check out for help with this watch? Anyone got a recommendation of companion app other than Wii Watch (utter toilet) or Watch Droid (flaky at best)
kingtendo said:
Are there any other forums I can check out for help with this watch? Anyone got a recommendation of companion app other than Wii Watch (utter toilet) or Watch Droid (flaky at best)
Click to expand...
Click to collapse
full android smartwatch
duanim said:
full android smartwatch
Click to expand...
Click to collapse
Please have a look what options KOSPET PRIME brings us after advanced setup - see my video at https://youtu.be/fdvKLo_uAhs
Hi guys, I just got a OnePlus 8 and loaded LineageOS 18.1 onto it and wanted to use it to play games on my 4K TV.
The following is a list of the problems and solutions I encountered to get there.
First, I used a USB-C to HDMI adapter on my 4K TV.
I connect my DualShock 4 to it via bluetooth for a console experience.
a) Problem 1 - Full screen output is shifted to the right slightly (black bar on left side)
Solution 1 - I rooted and used this Magisk module here with the OnePlus 8 preset. It requires enabling in Developer settings (Cutouts) after installation.
https://forum.xda-developers.com/t/module-n3o-no-nonsense-notch-overlay.4226413/
b) Problem 2 - Aspect was weird (black bars on top and bottom)
Solution 2 - SecondScreen with the resolution set to 1080p fixed this. Full screen on TV.
c) Problem 3 - Despite setting SecondScreen to 1080p, phone was outputting to my 4K TV at 4K30Hz (and presumably just upscaling). Horrible input lag and frame rates. I could find NO SETTING to change this anywhere. ADB commands such as adb shell wm size etc had no effect and I think are just what SecondScreen uses behind the scenes as they produced a similar effect. But when I connected it to my 1080p monitor there were no issues, things were smooth and responsive so....
Solution 3 - I bought something like one of these: an EDID emulator for HDMI and it is working like a charm. Fools the phone into thinking the TV's max res is 1080p and so the phone outputs at that. Now buttery smooth frame rates.
https://www.amazon.com/Passthrough-Generrtion-Headlesskeep-Extenders-3840x2160/dp/B08RCMFLMK/
d) Problem 4 - Brightness on phone weirdly tied to brightness on TV. I had to run it at full backlight to get full brightness on TV
Solution 4 - Disabling the display anti-flicker setting seemed to unlink the brightness on the phone and TV. Now I can play at normal brightness on TV with zero on phone (set by SecondScreen)
e) Problem 5 - Using a phone as a video game console uses battery.
Solution 5 - Got a new USB-C adapter that allows charging. Not this, but something like this. Confirmed can charge and have video out to my TV at the same time.
https://www.amazon.com/Multiport-Delivery-Converter-Compatible-Chrome-Book/dp/B087Q62H89/
And there you go. So far this seems totally viable and cool, and I am a fussy, hard-to-please kind of person.
I am looking forward to using this to keep playing some RPGs I would like to get through, with a console experience at home but still able to pick up and continue a bit when out.
Hope this helps someone! Spent hours googling and trying to figure this stuff out.
It's **** like this that got me into modding droids in the first place. You are a legend and a gangster. Keep on doing whatever. XD
This is an excellent guide and gives me more confidence to install the mod and mess with it. Thanks
Useful info like this will hopefully increase the likelihood that the community will use roms to implement the desktop experience. Maru was one example I saw a redditor post but it's in early development.
Also check out Taskbar which is an excellent app for DTE on non-rooted phones
I'm curious to know from those who updated/flashed to the STABLE (NOT BETA, please!), how is your phone working so far? Do you have any issues? Were the issues from the BETA resolved?
Format: (So that it's easier for people to associate with their device)
- Model: Snapdragon/Exynos
- Openline or Branded
- Updated via OTA or Flashed
- Dirty flash or FULL reset?
- Issues:
- What do you like/dislike:
Your post will greatly help the community.
Hopefully carriers will start pushing the Android 12/One UI 4 update for the Note 20/Ultra OTA this upcoming week. The S21 on VZW pushed it OTA the same day as the European roll out, so maybe its not too far behind for US carrier branded Note models.
-Exynos
-Unbranded
-Flashed with Odin (Switzerland firmware)
-No issues detected
I generally like the new animations, the new popup PiP design (rounded corner and possibility of resizing the window), battery life seems to be as good as before. The possiiblity of making AoD turn on when receiving a notification is nice and resembles the old Motorola active display feature. New Pro Mode layour for camera is better. I also enjoy the integration of the same animation for loading screen system wide, it's a nice touch even though I think the animation itself could be better. The gesture system from Google (Swipe from sides and bottom) now is usable with a 3rd party launcher, though it's still a bit clunky.
The only thing I dislike is the brightness bar in the notification tray which is now "tall" all the time and takes more space.
I must say that I didn't notice any particular difference coming from the second Beta (for Exynos there were only 2 beta releases), the first one was a bit clunky but the second was already well cooked. As far as I've seen there are no new issues introduced with this release, the 2 I knew of that were introducd with Android 11 still stand: Samsung gestures (swipe from bottom, the 3 way one) don't work as smoothly as in Android 10 because the recents gesture is not interactive and triggers only on finger release, the "currently playing" notification in the tray sometimes resets (when you reboot for instance it appears showing the last thing you were listening to).
Overall I'm happy about the update, it's a minor one for sure but they succeeded in not screwing up.
Sprov said:
-Exynos
-Unbranded
-Flashed with Odin (Switzerland firmware)
-No issues detected
I generally like the new animations, the new popup PiP design (rounded corner and possibility of resizing the window), battery life seems to be as good as before. The possiiblity of making AoD turn on when receiving a notification is nice and resembles the old Motorola active display feature. New Pro Mode layour for camera is better. I also enjoy the integration of the same animation for loading screen system wide, it's a nice touch even though I think the animation itself could be better. The gesture system from Google (Swipe from sides and bottom) now is usable with a 3rd party launcher, though it's still a bit clunky.
The only thing I dislike is the brightness bar in the notification tray which is now "tall" all the time and takes more space.
I must say that I didn't notice any particular difference coming from the second Beta (for Exynos there were only 2 beta releases), the first one was a bit clunky but the second was already well cooked. As far as I've seen there are no new issues introduced with this release, the 2 I knew of that were introducd with Android 11 still stand: Samsung gestures (swipe from bottom, the 3 way one) don't work as smoothly as in Android 10 because the recents gesture is not interactive and triggers only on finger release, the "currently playing" notification in the tray sometimes resets (when you reboot for instance it appears showing the last thing you were listening to).
Overall I'm happy about the update, it's a minor one for sure but they succeeded in not screwing up.
Click to expand...
Click to collapse
Thank you for this, @Sprov!
How about on connectivity, WiFi, Cellular, 5G, WiFi Calling/VoLTE, don't you have any issues? Connecting to BT devices like Buds Pro or any audio devices, Google AUTO etc.?
BlinkThinks said:
Thank you for this, @Sprov!
How about on connectivity, WiFi, Cellular, 5G, WiFi Calling/VoLTE, don't you have any issues? Connecting to BT devices like Buds Pro or any audio devices, Google AUTO etc.?
Click to expand...
Click to collapse
Everything as smooth as always, now that I think about it I had to pair again the Buds Pro during the first Beta (it was working at the beginning though) because the media would play but there was no sound output. In my area there's no 5G to test. 4G and calls fine as before, WiFi, GPS all alright. I don't use Android Auto
I have two very annoying issues with One UI 4:
- Overheat
- bad animations (lag, fps drop and etc)
-Exynos -Unbranded -Flashed with Odin (Switzerland firmware) -No issues detected I generally like the new animations, the new popup PiP design (rounded corner and possibility of resizing the window), battery life seems to be as good as before. The possiiblity of making AoD turn on when receiving a notification is nice and resembles the old Motorola active display feature. New Pro Mode layour for camera is better. I also enjoy the integration of the same animation for loading screen system wide, it's a nice touch even though I think the animation itself could be better. The gesture system from Google (Swipe from sides and bottom) now is usable with a 3rd party launcher, though it's still a bit clunky. The only thing I dislike is the brightness bar in the notification tray which is now "tall" all the time and takes more space. I must say that I didn't notice any particular difference coming from the second Beta (for Exynos there were only 2 beta releases), the first one was a bit clunky but the second was already well cooked. As far as I've seen there are no new issues introduced with this release, the 2 I knew of that were introducd with Android 11 still stand: Samsung gestures (swipe from bottom, the 3 way one) don't work as smoothly as in Android 10 because the recents gesture is not interactive and triggers only on finger release, the "currently playing" notification in the tray sometimes resets (when you reboot for instance it appears showing the last thing you were listening to). Overall I'm happy about the update, it's a minor one for sure but they succeeded in not screwing up.
I guess the Swiss version won't work with BTU?
enigmatron said:
-Exynos -Unbranded -Flashed with Odin (Switzerland firmware) -No issues detected I generally like the new animations, the new popup PiP design (rounded corner and possibility of resizing the window), battery life seems to be as good as before. The possiiblity of making AoD turn on when receiving a notification is nice and resembles the old Motorola active display feature. New Pro Mode layour for camera is better. I also enjoy the integration of the same animation for loading screen system wide, it's a nice touch even though I think the animation itself could be better. The gesture system from Google (Swipe from sides and bottom) now is usable with a 3rd party launcher, though it's still a bit clunky. The only thing I dislike is the brightness bar in the notification tray which is now "tall" all the time and takes more space. I must say that I didn't notice any particular difference coming from the second Beta (for Exynos there were only 2 beta releases), the first one was a bit clunky but the second was already well cooked. As far as I've seen there are no new issues introduced with this release, the 2 I knew of that were introducd with Android 11 still stand: Samsung gestures (swipe from bottom, the 3 way one) don't work as smoothly as in Android 10 because the recents gesture is not interactive and triggers only on finger release, the "currently playing" notification in the tray sometimes resets (when you reboot for instance it appears showing the last thing you were listening to). Overall I'm happy about the update, it's a minor one for sure but they succeeded in not screwing up.
I guess the Swiss version won't work with BTU?
Click to expand...
Click to collapse
It works with BTU, in Odin use home_csc for retaining your data.
Clean install here and everything is smooth and I feel it have a better battery life then before..
Anyone got a ZIP file of the software ending in LF on android 12? The sammobile site is slow at downloading files from.
Model: N986U xfinity or comcast doesn't matter.
Rollablunt420 said:
Anyone got a ZIP file of the software ending in LF on android 12? The sammobile site is slow at downloading files from.
Model: N986U xfinity or comcast doesn't matter.
Click to expand...
Click to collapse
SM-N986USQS2EULF_CCT.zip | by Venom0642 for Galaxy Note 20 Ultra
Android 12 Official AT&T
www.androidfilehost.com
Awesome thank you. Next task to work on is how to root it. And get this bootloader unlocked officially.
Leon said:
I have two very annoying issues with One UI 4:
- Overheat
- bad animations (lag, fps drop and etc)
Click to expand...
Click to collapse
I have same issue.
Hello ,
Exynos
Phone buy Samsung Shop web
Flash with Odin PC , Switzerland firmware
Just update , i became from beta 2 , i use home csc . I conserve all data
My phone is more smooth , more reactive . For battery , it's difficult to say it's more better . Good works .
Codec LDAC is functional since a few update , i like that with my Soundcore Life Q35 .
I like this update but it's not a big update .
crizalid8 said:
I have same issue.
Click to expand...
Click to collapse
Not sure about the high temperature, but I read in other forums that factory reset can't fix the laggy animations. I think for this we need to spam on Samsung Support. Also, I did heavy debloat with some PC app, and seems the battery life is drastically improved. I may share the result in a few days.
terneuv said:
Hello ,
Exynos
Phone buy Samsung Shop web
Flash with Odin PC , Switzerland firmware
Just update , i became from beta 2 , i use home csc . I conserve all data
My phone is more smooth , more reactive . For battery , it's difficult to say it's more better . Good works .
Codec LDAC is functional since a few update , i like that with my Soundcore Life Q35 .
I like this update but it's not a big update .
Click to expand...
Click to collapse
Does LDAC stick once it's enabled or do you have to keep enabling it? Do you also need to go into developer settings to activate it?
Sucks. On my Verizon it killed the top of the display; first row of icons. Posted a thread in Q&A.
My advice is: Don't!
Immediately used adb app control to kill updates.
Now what?
I'm still on beta three, I haven't had any issues with any of the releases myself 986U1 ATT
- Model: Exynos
- Branded
- Flashed
- Dirty flash for starters, then did a FULL reset?
- Issues: Lots of little ones, Bluetooth Buds continually disconnecting as well as Galaxy Watch 4, Alarm keeps turning off when hit snooze button instead of snoozing,Google Assistant does not always work with voice wake up, this is a problem when driving. Plus a couple of other small things I can't remember at the moment.
- What do you like, most things I like, Dislike that Android Auto for Phone screens no longer supported, have to use Assistant Driving Mode that does not work in landscape mode and is absolute rubbish.
I have now gone back to Android 11, till I see that these problems are fixed.
I did try the Beta version before the stable one, and that have most of these issues as well, so thought should have been fixed for stable release.
BlinkThinks said:
I'm curious to know from those who updated/flashed to the STABLE (NOT BETA, please!), how is your phone working so far? Do you have any issues? Were the issues from the BETA resolved?
Format: (So that it's easier for people to associate with their device)
- Model: Snapdragon/Exynos
- Openline or Branded
- Updated via OTA or Flashed
- Dirty flash or FULL reset?
- Issues:
- What do you like/dislike:
Your post will greatly help the community.
Click to expand...
Click to collapse
I have no (AS IN NONE) issues with the Stable A12. Everything is working as it should and the device is gr8!
- Exynos from Malaysia (XME)
- Unbranded
- Updated via OTA
- Dirty flash
- Issues: Whenever I use the notification panel it gets laggy, like it were set at 60hz
- What you like: I love it, it handles overheat better.