Hi and thanks for reading.
I've tried to flash 8.1 ROMs (both 64 and 32 bits) but I always have issues with GApps. (picked from kenzoroms page)
Before you ask: I'm on 64bit supported TWRP, and I have flashed them with /system /data (even /data/media) and /cache wiped.
When I flash ROM and GApps at the same time I got stuck in bootanimation.
When I flash ROM without GApps the ROM boots fine. But if I flash GApps later, Play Services keeps crashing.
Any ideas what's happening? Thanks in advance.
-----
Solution: In my case, it was the recovery (tywinlannister's TWRP) the faulty one. I've flashed this recovery and everything works as supposed (tested ROM: Atomic OS 32bit)
Valdamjong said:
Hi and thanks for reading.
I've tried to flash 8.1 ROMs (both 64 and 32 bits) but I always have issues with GApps. (picked from kenzoroms page)
Before you ask: I'm on 64bit supported TWRP, and I have flashed them with /system /data (even /data/media) and /cache wiped.
When I flash ROM and GApps at the same time I got stuck in bootanimation.
When I flash ROM without GApps the ROM boots fine. But if I flash GApps later, Play Services keeps crashing.
Any ideas what's happening? Thanks in advance.
Click to expand...
Click to collapse
You're not alone ! Same happens to me on every 32 and 64 bit oreo ROM (XT1642)
pv979 said:
You're not alone ! Same happens to me on every 32 and 64 bit oreo ROM (XT1642)
Click to expand...
Click to collapse
Same for me
Strange! Nothing like This happens in 1643 though! u can get opengapps from xda! I use pico for all the ROMs and skip adding Google account at the start! Works for me!
Use GZR gapps
Work fine for me
Luis Infante said:
Use GZR gapps
Work fine for me
Click to expand...
Click to collapse
Do you use these ones https://androidfilehost.com/?w=files&flid=189325 ?
If not, which do you use?
Downloading from official open gapps would not create any issue(even it is in beta version)
DgnrtnX said:
Downloading from official open gapps would not create any issue(even it is in beta version)
Click to expand...
Click to collapse
Any combination of div. Oreo-ROMS and the different Gapps-Versions form PICO up to AROMA wont't boot.
Flashing ROM and boot will work, went back to the recovery , Wipe Cache, DALVIK/ART, flash GAPPS will boot, but no Google-action works
Luis Infante said:
Use GZR gapps
Work fine for me
Click to expand...
Click to collapse
Unfortunately not for me
Valdamjong said:
Hi and thanks for reading.
I've tried to flash 8.1 ROMs (both 64 and 32 bits) but I always have issues with GApps. (picked from kenzoroms page)
Before you ask: I'm on 64bit supported TWRP, and I have flashed them with /system /data (even /data/media) and /cache wiped.
When I flash ROM and GApps at the same time I got stuck in bootanimation.
When I flash ROM without GApps the ROM boots fine. But if I flash GApps later, Play Services keeps crashing.
Any ideas what's happening? Thanks in advance.
Click to expand...
Click to collapse
I had the same problem : no GAPPS would work on any oreo rom (32 or 64 bit)
Seems that my recovery was to blame : I was using the twrp-3.2.1-r2-arm64-tywinlannister7.img as recovery
Just now, I switched to twrp_3.2.1-0_athene_NandO.img , Installed an Oreo ROM , installed gapps, and it runs just fine !
Are you by any chance also running twrp-3.2.1-r2-arm64-tywinlannister7.img as recovery ?!
pv979 said:
I had the same problem : no GAPPS would work on any oreo rom (32 or 64 bit)
Seems that my recovery was to blame : I was using the twrp-3.2.1-r2-arm64-tywinlannister7.img as recovery
Just now, I switched to twrp_3.2.1-0_athene_NandO.img , Installed an Oreo ROM , installed gapps, and it run just fine !
Are you by any chance also running twrp-3.2.1-r2-arm64-tywinlannister7.img as recovery ?!
Click to expand...
Click to collapse
Yes, I'm using tywinlannister's recovery.
Valdamjong said:
Yes, I'm using tywinlannister's recovery.
Click to expand...
Click to collapse
Just try this one : https://sourceforge.net/projects/invictaos/files/Motorola/Athene/twrp_3.2.1-0_athene_NandO.img/download
pv979 said:
Just try this one : https://sourceforge.net/projects/invictaos/files/Motorola/Athene/twrp_3.2.1-0_athene_NandO.img/download
Click to expand...
Click to collapse
Trying right now.
EDIT: It boots without any flaw at this moment.
The recovery was the faulty one all this time.
Please, close this.
Marv42 said:
Do you use these ones https://androidfilehost.com/?w=files&flid=189325 ?
If not, which do you use?
Click to expand...
Click to collapse
Yes these gapps
---------- Post added at 09:32 PM ---------- Previous post was at 09:32 PM ----------
pv979 said:
Unfortunately not for me
Click to expand...
Click to collapse
Maybe Is your recovery
okay, now it's works.
First I used the twrp_3.2.1-0_athene_NandO.img-Recovery, get 255 Error, flashed the tywinlannister's recovery, now it works well
The link you provided for the recovery is not working
Hey can you tell me which recovery you used as i am having the same problem , the link you provided is not working
Related
Hey
i intalled TEAM WIN recovery 2.6.3 and for some reason it says "xperia D"
how can i change it? thanks!
iPain said:
Hey
i intalled TEAM WIN recovery 2.6.3 and for some reason it says "xperia D"
how can i change it? thanks!
Click to expand...
Click to collapse
whaT WAS the zip file u flashed to install TEAM WIN
sunnysays said:
whaT WAS the zip file u flashed to install TEAM WIN
Click to expand...
Click to collapse
dunnu it says teamwin v2.6.3.0 i remember i flashed xperia d rom for defy plus
iPain said:
dunnu it says teamwin v2.6.3.0 i remember i flashed xperia d rom for defy plus
Click to expand...
Click to collapse
In order to get your TEAMWIN u need to flash defy_twrp_recovery_2.6.3.0.zip
sunnysays said:
In order to get your TEAMWIN u need to flash defy_twrp_recovery_2.6.3.0.zip
Click to expand...
Click to collapse
will do thanks
and another thing... i flashed quarx 4.4.2 ROM via this guide https://www.youtube.com/watch?v=tJ3KVp09ixE
and i always lose signal no metter where i am it happends for few minutes - hours - even a day!
what can i do to fix it?
iPain said:
will do thanks
and another thing... i flashed quarx 4.4.2 ROM via this guide https://www.youtube.com/watch?v=tJ3KVp09ixE
and i always lose signal no metter where i am it happends for few minutes - hours - even a day!
what can i do to fix it?
Click to expand...
Click to collapse
i guess that bug is been fixed in the latest nightly ... flash the new nightly from this link
sunnysays said:
i guess that bug is been fixed in the latest nightly ... flash the new nightly from this link
Click to expand...
Click to collapse
just need to flash it or wipe something? after the flash i need to wipe cache and davlik?
iPain said:
just need to flash it or wipe something? after the flash i need to wipe cache and davlik?
Click to expand...
Click to collapse
you need to do a wipe cache and wipe dalvik cache after your install rom and gapps
sunnysays said:
you need to do a wipe cache and wipe dalvik cache after your install rom and gapps
Click to expand...
Click to collapse
installed your twrp but still i see the xperia d logo
iPain said:
installed your twrp but still i see the xperia d logo
Click to expand...
Click to collapse
Installation Instructions coming from stock
If you are coming from stock OS (must be rooted with CWM) or an old build of GB, ICS, or JB then flash "defy_twrp_recovery_2.6.3.0.zip" from the links under downloads.
Wipe /data, /cache, and /system in TWRP or use defy_safewipe.zip
Flash ROM
Flash Gapps
Reboot
Hi my phone seems to hate custom roms like cyamogenmod and gapps because everytime i flash them a bootloop inevitably comes to haunt me. Other roms like Albe95 Ports work. http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-albe95-lollirom-official-1-0-t3049564
My current rom is Phoenix Rom. http://forum.xda-developers.com/showthread.php?t=2349584
The roms listed above work flawlessly.
A rom that I wanted to try was cyamogenmod 12.1 optimized by JDC team but it wouldnt boot. I followed exact instructions for each rom. Every time i used TWRP.
Could my problem be that gapps screw with the custom rom ?
Google apps are integrated in phoenix rom and albe95.
Maybe thats why they work ?
Please help.
Thank you for youre time.
JaguarBeast said:
Hi my phone seems to hate custom roms like cyamogenmod and gapps because everytime i flash them a bootloop inevitably comes to haunt me. Other roms like Albe95 Ports work. http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-albe95-lollirom-official-1-0-t3049564
My current rom is Phoenix Rom. http://forum.xda-developers.com/showthread.php?t=2349584
The roms listed above work flawlessly.
A rom that I wanted to try was cyamogenmod 12.1 optimized by JDC team but it wouldnt boot. I followed exact instructions for each rom. Every time i used TWRP.
Could my problem be that gapps screw with the custom rom ?
Google apps are integrated in phoenix rom and albe95.
Maybe thats why they work ?
Please help.
Thank you for youre time.
Click to expand...
Click to collapse
You can easily test that theory by not flashing Gapps. Just only flash the rom and try to boot it.
Also are you running a Lollipop bootloader and modem?
Ive tried flashing only custom rom but the bootloop comes back. Right now i am running a lollipop modem and bootloader.
JaguarBeast said:
Ive tried flashing only custom rom but the bootloop comes back. Right now i am running a lollipop modem and bootloader.
Click to expand...
Click to collapse
Ok do this:
Backup everything that you want to save stored on your internal storage.
1. Make sure you are running the latest TWRP. This is important because using an outdated version will not let you boot the rom.
2. Start TWRP and do a advanced wipe. Format /data (this will wipe your internal storage), format /system, format /cache and /dalvik.
3. Flash the rom.
Unfortunately that does not help. I have advanced wiped ever time before flashing rom. Maybe permisions are the problem ?
JaguarBeast said:
Unfortunately that does not help. I have advanced wiped ever time before flashing rom. Maybe permisions are the problem ?
Click to expand...
Click to collapse
What version of TWRP are you using? And did you try booting it without simcard and sd card?
Im using 2.8.7.2 twrp. I havnt tried to boot without sd or sim. Would that be the problem ?
JaguarBeast said:
Im using 2.8.7.2 twrp. I havnt tried to boot without sd or sim. Would that be the problem ?
Click to expand...
Click to collapse
No idea. I'm just guessing because that rom should just boot.
Are you sure the file you downloaded is not damaged? Check the MD5 signature. For example, the latest version of the JDC CM rom has MD5:
3a1af890b87c11256c943759459ec3e4
So transfer the file to your phone. Then download a MD5 checker from the market and compare it.
Md5 matches. Looks like the insides of my phone are screwed up
Reparation your device
As those are caused by a screwed partition
As a reparation fixes this
You are going to need :-
0.a PC
1.a PIT file for your Galaxy s4 (depending on your variant)
2.Odin
3.Samsung USB drivers installed in the PC
Sent from my GT-I9505 using Tapatalk
Start with flashing the stock rom using odin. Then go for root,then recovery and then try flashing. I had the same problem but it never bothered me after flaahing the stock.
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
MASK10101012 said:
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
Click to expand...
Click to collapse
Reboot to recovery>>wipe system, data, cache, dalvik cache>>install zip>>select MIUI zip>>reboot
Note: Sometimes, the MIUI rom shows error at first time. So again select install zip and select the MIUI zip, without rebooting.
sasukay said:
Reboot to recovery>>wipe system, data, cache, dalvik cache>>install zip>>select MIUI zip>>reboot
Note: Sometimes, the MIUI rom shows error at first time. So again select install zip and select the MIUI zip, without rebooting.
Click to expand...
Click to collapse
I didn't reboot at all,did it just like above ^^
MASK10101012 said:
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
Click to expand...
Click to collapse
Try to flash stock rom first then flash miui rom.
Hope this help
MASK10101012 said:
I didn't reboot at all,did it just like above ^^
Click to expand...
Click to collapse
Okay, so try this, reboot into recovery, wipe the directories, then choose reboot to recovery from reboot option....then flash the MIUI zip
I have same problem tomorrow.
I have same problem tomorrow when I was flashing ASUS ZenFone UI Rom.It was get error7 so I will try twrp 3 new version.But no effect then I will again flashed my old twrp and then flash it's work for me.
I were wipe cache only....(do not full wipe,system,data,internal former)
I hope this method is work.
sasukay said:
Okay, so try this, reboot into recovery, wipe the directories, then choose reboot to recovery from reboot option....then flash the MIUI zip
Click to expand...
Click to collapse
Okay so I need more help. I think I'll also be flashing phantom kernel.after installing miui. Haven't started yet but will soon. The problem is that I'm a complete noob with kernels. So... What are the things I'm gonna have to do ? CM12.1 just keeps getting worse with each update .??
MASK10101012 said:
Okay so I need more help. I think I'll also be flashing phantom kernel.after installing miui. Haven't started yet but will soon. The problem is that I'm a complete noob with kernels. So... What are the things I'm gonna have to do ? CM12.1 just keeps getting worse with each update .����
Click to expand...
Click to collapse
Just download the zip and flash it. And set the settings as mentioned in the phantom kernel post using Kernl Adiutor app.
sasukay said:
Just download the zip and flash it. And set the settings as mentioned in the phantom kernel post using Kernl Adiutor app.
Click to expand...
Click to collapse
OK I'll start soon. I hope I have no probs.. Thanks!
This is a general thread to introduce a version of Lineage OS with MicroG instead of Gapps, made for the Stallmanites who has an onyx device.
Download link: https://download.lineage.microg.org/onyx/
More info on : https://lineage.microg.org/
If possible someone could contact the specific maintainer and create a DevDb thread cos this rom deserves a spot
Did you manage to install latest lineage-14.1-20171213-microG-onyx.zip ?
It doesn't boot after install and the md5 doesn't seem to be right..
jackshot said:
Did you manage to install latest lineage-14.1-20171213-microG-onyx.zip ?
It doesn't boot after install and the md5 doesn't seem to be right..
Click to expand...
Click to collapse
Yeah, the rom is just like the normal Lineage OS but without gapps. nothing to sacrifice bricking your device over
jackshot said:
Did you manage to install latest lineage-14.1-20171213-microG-onyx.zip ?
It doesn't boot after install and the md5 doesn't seem to be right..
Click to expand...
Click to collapse
yes same for me! ROM doesnt boot up
Manthan Gohil said:
yes same for me! ROM doesnt boot up
Click to expand...
Click to collapse
Did you wipe all (Internal, system and data ?).
Which TWRP?
Kéno40 said:
Did you wipe all (Internal, system and data ?).
Which TWRP?
Click to expand...
Click to collapse
I wiped all - except internal memory because of the files and photos that are there, and the twrp version is latest 3.2.0
jackshot said:
I wiped all - except internal memory because of the files and photos that are there, and the twrp version is latest 3.2.0
Click to expand...
Click to collapse
I used the blue spark recovery, it worked a charm
Kéno40 said:
Did you wipe all (Internal, system and data ?).
Which TWRP?
Click to expand...
Click to collapse
Yes I wiped everything except storage. And TWRP is 3.1.0.0
Will try with the latest TWRP tomorrow
So how does this work? I do understand its an open implementation of few core Google services. Will I be able to install apps from play store? From an end user's perspective, what changes will I see compared to a regular custom ROM?
Latest zip (lineage-14.1-20171222-microG-onyx.zip) boots fine.. solid build
I,m not developer of this rom.
I,m just updated rom file link from official havoc source..so,all credit goes to developer..
u can Download n install like other Android 10 Rom..:good:
It,s Android 10 Based....
https://sourceforge.net/projects/lc-dev/files/cancro/
Telegram official group for Mi3: https://t.me/micancro
HI.. firstly, thank you for the ROM. I have installed it on my cancro. Couple of questions -
Which version of Gapps? I tried installing PICO or nano (ARM / 10). Both failed - either no space in partition or the package is not the correct version for this OS. Please help.
I also tried installing Play Store apk. But the app never opens and keeps crashing everytime.
Thanks in advance
billa vimal said:
I,m not a developer/expert person..my previous device was Xperia z3.that has Snapdragon 801(arm.v7).
When I try to installing gapps after installing rom I got error..in that device I need to reboot recovery again after installed rom.then I can install gapps..u can try this procedure..#sorry for my bad English..
Click to expand...
Click to collapse
billa vimal said:
HI.. firstly, thank you for the ROM. I have installed it on my cancro. Couple of questions -
Which version of Gapps? I tried installing PICO or nano (ARM / 10). Both failed - either no space in partition or the package is not the correct version for this OS. Please help.
I also tried installing Play Store apk. But the app never opens and keeps crashing everytime.
Thanks in advance
Click to expand...
Click to collapse
Try to find "BiTGApps-arm-10.0.0-v0.6_signed.zip" from internet, it work well with this ROM.
And let me know if you can not find it out!
r30857 said:
Try to find "BiTGApps-arm-10.0.0-v0.6_signed.zip" from internet, it work well with this ROM.
And let me know if you can not find it out!
Click to expand...
Click to collapse
Ah! Thank you so much! Finally, a working Gapps!
Which version of Magisk would work?
billa vimal said:
Which version of Magisk would work?
Click to expand...
Click to collapse
Latest one
Meraj018 said:
Latest one
Click to expand...
Click to collapse
Thank you. The latest one worked and I was able to root my device.
Many Apps are Crashed
Many Apps are crashed in this ROM , like SnapChat and more......
Pls Help..!
r30857 said:
Try to find "BiTGApps-arm-10.0.0-v0.6_signed.zip" from internet, it work well with this ROM.
And let me know if you can not find it out!
Click to expand...
Click to collapse
Hello, on Mi3w Data(f2fs)
First I installed rom, then wipe cahed and dalvik, then reboot to recovery.
Next I tried "BiTGApps-arm-10.0.0-v0.6_signed.zip" but failed sdk version.
Then I tried "open_gapps-arm-10.0-pico-20201204.zip" and no errors at first try. so I wiped cache and dal and reboot again then flashed "Magisk_20.4"
And boot to system.
Reminder, skip pin entering after selecting 3 lock options. face unlock feature crashing and will NOT end SETUP.
BTW this is Great! Thanks! my first exp on AndroidQ.
CarCE12 said:
Hello, on Mi3w Data(f2fs)
First I installed rom, then wipe cahed and dalvik, then reboot to recovery.
Next I tried "BiTGApps-arm-10.0.0-v0.6_signed.zip" but failed sdk version.
Then I tried "open_gapps-arm-10.0-pico-20201204.zip" and no errors at first try. so I wiped cache and dal and reboot again then flashed "Magisk_20.4"
And boot to system.
Reminder, skip pin entering after selecting 3 lock options. face unlock feature crashing and will NOT end SETUP.
BTW this is Great! Thanks! my first exp on AndroidQ.
Click to expand...
Click to collapse
Now I tried
flashing Rom and Gapps(pico) then Wipe Cache and Dalvik
then reboot to recovery then flash Magisk 20.4
(Optional Reboot to recovery I wiped Dalvik, Cache, Data, including Internal Storage.
Then I reboot to recovery again, because my recovery setting will reset after wiping internal storage)
Now reboot to SYSTEM
SETUP REMINDER! (My Mi3w) Face Unlock CRASHING and will NOT end SETUP.
To be safe I did (no sim inserted) Skip Data and Wifi.
Selected "FaceUnlock+Pin" (DO NOT ENTER PIN) "Skip" setup everything later.