Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
MASK10101012 said:
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
Click to expand...
Click to collapse
Reboot to recovery>>wipe system, data, cache, dalvik cache>>install zip>>select MIUI zip>>reboot
Note: Sometimes, the MIUI rom shows error at first time. So again select install zip and select the MIUI zip, without rebooting.
sasukay said:
Reboot to recovery>>wipe system, data, cache, dalvik cache>>install zip>>select MIUI zip>>reboot
Note: Sometimes, the MIUI rom shows error at first time. So again select install zip and select the MIUI zip, without rebooting.
Click to expand...
Click to collapse
I didn't reboot at all,did it just like above ^^
MASK10101012 said:
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
Click to expand...
Click to collapse
Try to flash stock rom first then flash miui rom.
Hope this help
MASK10101012 said:
I didn't reboot at all,did it just like above ^^
Click to expand...
Click to collapse
Okay, so try this, reboot into recovery, wipe the directories, then choose reboot to recovery from reboot option....then flash the MIUI zip
I have same problem tomorrow.
I have same problem tomorrow when I was flashing ASUS ZenFone UI Rom.It was get error7 so I will try twrp 3 new version.But no effect then I will again flashed my old twrp and then flash it's work for me.
I were wipe cache only....(do not full wipe,system,data,internal former)
I hope this method is work.
sasukay said:
Okay, so try this, reboot into recovery, wipe the directories, then choose reboot to recovery from reboot option....then flash the MIUI zip
Click to expand...
Click to collapse
Okay so I need more help. I think I'll also be flashing phantom kernel.after installing miui. Haven't started yet but will soon. The problem is that I'm a complete noob with kernels. So... What are the things I'm gonna have to do ? CM12.1 just keeps getting worse with each update .??
MASK10101012 said:
Okay so I need more help. I think I'll also be flashing phantom kernel.after installing miui. Haven't started yet but will soon. The problem is that I'm a complete noob with kernels. So... What are the things I'm gonna have to do ? CM12.1 just keeps getting worse with each update .����
Click to expand...
Click to collapse
Just download the zip and flash it. And set the settings as mentioned in the phantom kernel post using Kernl Adiutor app.
sasukay said:
Just download the zip and flash it. And set the settings as mentioned in the phantom kernel post using Kernl Adiutor app.
Click to expand...
Click to collapse
OK I'll start soon. I hope I have no probs.. Thanks!
Related
Hello people, can you help me please?
I can't install ANY custom roms. I have the latest 2.3.5 official rom.
Here's how I'm doing:
- Backup on CWM
- Wipe everything (factory reset, cache, dalvik cache)
- install zip
- reboot system now.
And then, black screen with Huawei red logo appears and starts to bootloop.
It occurs with any custom rom, I can only use the official one.
What's happening? Maybe I've to enable logcat? If yes, how can i do it trough ADB?
Best regards.
Ok, i've enabled logcat and occurs the same.. bootloops...
When i wipe dalvik-cache this message appears:
"E:unknown volume for path [/sd-ext]"
What does it mean?
I've unlocked the bootloader by doing this: http://forum.xda-developers.com/showthread.php?t=1457490
Well, I tried to flash again the custom roms (CM, Oxygen and MIUI) and made all the wipes, and I get stuck again at the Huawei logo...
Someone please help me?
Are you flashing the .35 kernel versions of the roms? Oxygen wont work as it has a .32 kernel. Whether that would cause a bootloop, I dont know.
PaulMilbank said:
Are you flashing the .35 kernel versions of the roms? Oxygen wont work as it has a .32 kernel. Whether that would cause a bootloop, I dont know.
Click to expand...
Click to collapse
Yes pal, i'm flashing .35 kernels...
Very strange, you know?
http://forum.xda-developers.com/showthread.php?t=1427533 - it is a .35 kernel, isn't it?
Some help, please?
mrasquinho said:
Some help, please?
Click to expand...
Click to collapse
Why dont you try Clockwork mod 5.5.0.4 to apply custom ROMs..
uumeshh said:
Why dont you try Clockwork mod 5.5.0.4 to apply custom ROMs..
Click to expand...
Click to collapse
I'm using it
Sent from my Huawei Ideos X5 using xda premium
Moved To Q&A
Please post all questions in the Q&A section
I've got the same problem as you :/ Please post here if you've solved it.
Damn. Still nothing on this from anyone. I've been researching this for ages, and I can't find anything on anyone being able to solve this problem.
Possible solution!
I found a custom ROM that I could install without getting bootloops!
http://forum.xda-developers.com/showthread.php?t=1481168
Just followed the directions and it actually worked this time!
boot to CWM -> factory reset* -> wipe cache partion & wipe dalvik cache -> format system directory* -> install the ROM from sdcard
I'm thinking that maybe the "format system directory" may be what fixed it... I'm really not sure. Never done that with any other ROM installation, so it would seem like this is a solution.
I updated my phone to latest liquidsmooth rom two days ago and the phone freezes and restarts/reboots randomly like sometimes when im on phone/ playing a game/ using browser/ connected to charger. Yesterday I changed rom to latest carbon rom. Did install (3 wipes) as told in the thread but im still having the reboots.
Im using TWRP recovery and had used Utility 1.10 to go back to stock from Energy rom with safestrap recovery.
Can tell me whats the prob? Is it the kernel problem?
Have you tried upgrading or reflashing TWRP and then doing a clean install of Carbon? Its probably worth doing a fresh download of each first just to make sure you cover all your bases. These reboots were happening to me a few months ago and it drove me mad. following these steps fixed it for me.
jcxmej said:
I updated my phone to latest liquidsmooth rom two days ago and the phone freezes and restarts/reboots randomly like sometimes when im on phone/ playing a game/ using browser/ connected to charger. Yesterday I changed rom to latest carbon rom. Did install (3 wipes) as told in the thread but im still having the reboots.
Im using TWRP recovery and had used Utility 1.10 to go back to stock from Energy rom with safestrap recovery.
Can tell me whats the prob? Is it the kernel problem?
Click to expand...
Click to collapse
Honestly, if you're using SafeStrap, that might be your problem. Remove SS and flash the ROM in TWRP. If your bootloader is unlocked, you don't really want to use SS. Also, make a stock backup in TWRP, prior to flashing. This way, it will be easier for you to recover in the future, and you won't need to go through the painful process of fastboot.
RikRong said:
Honestly, if you're using SafeStrap, that might be your problem. Remove SS and flash the ROM in TWRP. If your bootloader is unlocked, you don't really want to use SS. Also, make a stock backup in TWRP, prior to flashing. This way, it will be easier for you to recover in the future, and you won't need to go through the painful process of fastboot.
Click to expand...
Click to collapse
Like I said on first post Im using TWRP now. Previously I was using safestrap. I removed it and installed TRWP. Anyways thanks.
PantherVT said:
Have you tried upgrading or reflashing TWRP and then doing a clean install of Carbon? Its probably worth doing a fresh download of each first just to make sure you cover all your bases. These reboots were happening to me a few months ago and it drove me mad. following these steps fixed it for me.
Click to expand...
Click to collapse
Thanks man. I will upgrade TWRP or reinstall it first. Thanks for that tip. Will post again if it doesnt work.
Still having those restarts. Really irritating. Froze and rebooted 4 5 times today morning while I was on call and trying to message. I reflashed reinstalled everything. I used both Utility 1.10 and 1.20. Im getting reboots even the stock ROM after using the Utility. I am confused which Utility I should be using. I had no issue of rebooting before flashing using Utility. Can someone give me exact procedure to reflash so that i know i am not missing out anything.
jcxmej said:
Still having those restarts. Really irritating. Froze and rebooted 4 5 times today morning while I was on call and trying to message. I reflashed reinstalled everything. I used both Utility 1.10 and 1.20. Im getting reboots even the stock ROM after using the Utility. I am confused which Utility I should be using. I had no issue of rebooting before flashing using Utility. Can someone give me exact procedure to reflash so that i know i am not missing out anything.
Click to expand...
Click to collapse
you might need to do a clean install.
- what version of TWRP are you using (anything other than 2.4 should be fine)?
- to perform the clean install, mount system, then try wiping everything (system, factory reset, & internal storage) - DO NOT WIPE external SD (I presume this is where you store the ROM files
- after wiping, reboot recovery, then install whichever 4.2.2 ROM you want follow by the GApps (use the 3/2013 version)
jco23 said:
you might need to do a clean install.
- what version of TWRP are you using (anything other than 2.4 should be fine)?
- to perform the clean install, mount system, then try wiping everything (system, factory reset, & internal storage) - DO NOT WIPE external SD (I presume this is where you store the ROM files
- after wiping, reboot recovery, then install whichever 4.2.2 ROM you want follow by the GApps (use the 3/2013 version)
Click to expand...
Click to collapse
Since TWRP wasnt working for me, I tried flashing with CWM recovery by hashcode. Still had reboots. I was using TWRP 2.3.2.3
When you say wipe everything, does it include 'modem' and 'pds'? Saw these two options also inside Mount/Format menu of CWM recovery.
Also there was an option 'Mount sdcard' (internal I suppose) but when i click it nothing happens it remains as Mount sdcard. Rest of it changes from Mount to Unmount. Is there some problem with that?
Do I have to just Mount system only? Also after rebooting recovery do I have to mount system again?
I try again as you said meanwhile.
jcxmej said:
Since TWRP wasnt working for me, I tried flashing with CWM recovery by hashcode. Still had reboots. I was using TWRP 2.3.2.3
When you say wipe everything, does it include 'modem' and 'pds'? Saw these two options also inside Mount/Format menu of CWM recovery.
Also there was an option 'Mount sdcard' (internal I suppose) but when i click it nothing happens it remains as Mount sdcard. Rest of it changes from Mount to Unmount. Is there some problem with that?
Do I have to just Mount system only? Also after rebooting recovery do I have to mount system again?
I try again as you said meanwhile.
Click to expand...
Click to collapse
nope, just system/factory reset/internal storage.
yes, make sure everything is mounted (checked) so that they read "unmount"
jco23 said:
nope, just system/factory reset/internal storage.
yes, make sure everything is mounted (checked) so that they read "unmount"
Click to expand...
Click to collapse
Did exactly like said. Got into CWM recovery. Mounted system. Formatted system, data, cache, sdcard. Did factory reset and wiped the caches. Then rebooted recovery. Then installed the ROM, 3/13 gapps, gsm fix. Reboot system. Still no use. I got 2 reboots in 5 mins in the ROM. I checked the md5 of the files and its ok. Dont know what else to try?
jcxmej said:
Did exactly like said. Got into CWM recovery. Mounted system. Formatted system, data, cache, sdcard. Did factory reset and wiped the caches. Then rebooted recovery. Then installed the ROM, 3/13 gapps, gsm fix. Reboot system. Still no use. I got 2 reboots in 5 mins in the ROM. I checked the md5 of the files and its ok. Dont know what else to try?
Click to expand...
Click to collapse
which ROM are you trying to install?
jco23 said:
which ROM are you trying to install?
Click to expand...
Click to collapse
LiquidSmooth v2.9 by DHacker29
http://forum.xda-developers.com/showthread.php?t=2373703
I have also tried Carbon ROM but was having reboots with that too. I liked liquidsmooth better so trying to make this work.
jcxmej said:
LiquidSmooth v2.9 by DHacker29
http://forum.xda-developers.com/showthread.php?t=2373703
I have also tried Carbon ROM but was having reboots with that too. I liked liquidsmooth better so trying to make this work.
Click to expand...
Click to collapse
are you flashing a kernel at the same time?
I would recommend trying a basic 4.2.2 ROM right now - like unoffical AOKP.
another problem could be the GApps or GSM fix. try installing just the ROM without the GApps perhaps?
carbon was very solid too. unfortunately, I can't help you with the GSM fix, as I am CDMA.
jco23 said:
are you flashing a kernel at the same time?
I would recommend trying a basic 4.2.2 ROM right now - like unoffical AOKP.
another problem could be the GApps or GSM fix. try installing just the ROM without the GApps perhaps?
carbon was very solid too. unfortunately, I can't help you with the GSM fix, as I am CDMA.
Click to expand...
Click to collapse
Okay i will try but had this reboot issue even with the stock ROM after flashing with Utility 1.20.
jcxmej said:
Okay i will try but had this reboot issue even with the stock ROM after flashing with Utility 1.20.
Click to expand...
Click to collapse
hmm.... not really sure then. perhaps you lost root? try re-installing SuperSU - I'm just grasping at straws here.
someone mentioned a similar issue:
http://forum.xda-developers.com/showthread.php?p=44317692#post44317692
jco23 said:
hmm.... not really sure then. perhaps you lost root? try re-installing SuperSU - I'm just grasping at straws here.
someone mentioned a similar issue:
http://forum.xda-developers.com/showthread.php?p=44317692#post44317692
Click to expand...
Click to collapse
I think I have root access I had no issue with it. Okay maybe I will check the thread you gave. Anyways I tried Eclipse ROM which is based AOKP. Still had reboots. So I switched back to liquid. Anyways Im gonna keep trying the basics. If anyone has any suggestions I could try its welcome.
PS. Should I flash another kernel with the ROM just in case ? I have been only installing ROM and gapps only till now.
jcxmej said:
I think I have root access I had no issue with it. Okay maybe I will check the thread you gave. Anyways I tried Eclipse ROM which is based AOKP. Still had reboots. So I switched back to liquid. Anyways Im gonna keep trying the basics. If anyone has any suggestions I could try its welcome.
PS. Should I flash another kernel with the ROM just in case ? I have been only installing ROM and gapps only till now.
Click to expand...
Click to collapse
I don't think changing the kernel will do it.... I suspect the issue is with your recoveries - will respond in other thread....
i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
aman95 said:
i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
Click to expand...
Click to collapse
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
vlc07 said:
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
Click to expand...
Click to collapse
can you explain, how to flash kernel. i think, i am facing problem dping this
aman95 said:
can you explain, how to flash kernel. i think, i am facing problem dping this
Click to expand...
Click to collapse
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
marcussmith2626 said:
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
Click to expand...
Click to collapse
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
aman95 said:
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
Click to expand...
Click to collapse
Flash instructions are given in the rom thread only.
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
aman95 said:
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
Click to expand...
Click to collapse
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
redndian said:
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
Click to expand...
Click to collapse
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
aman95 said:
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
Click to expand...
Click to collapse
you can add your own task manager to the framework or use an app from the playstore
and dont ask to crack apps to get paid versions or i'll report if this continues
I can't install any custom rom after flashing stock rom on my galaxy y :crying:
can any one help me to solve this problem ?
M.E.10 said:
I can't install any custom rom after flashing stock rom on my galaxy y :crying:
can any one help me to solve this problem ?
Click to expand...
Click to collapse
First this is wrong section
Two what custom rom you want to install ? Did you follow instruction correctly ?
Mranggapo said:
First this is wrong section
Two what custom rom you want to install ? Did you follow instruction correctly ?
Click to expand...
Click to collapse
the custom rom i tried to install is NEMESIS.PHOENIX-signed.
i installed the both before flash to stock rom and the both worked well
after flash to stock rom i tried to install them again but the screen became black
M.E.10 said:
the custom rom i tried to install is NEMESIS.PHOENIX-signed and JELLYBLASTV3.signed
i installed the both before flash to stock rom and the both worked well
after flash to stock rom i tried to install them again but the screen became black
Click to expand...
Click to collapse
Wait for sometime, it takes time to boot especially when you are clearing dalvik cache
Mranggapo said:
Wait for sometime, it takes time to boot especially when you are clearing dalvik cache
Click to expand...
Click to collapse
i waited for a long time but no thing happen so i thought that the bootloader locked
i'm using the stock rom now but i want to install custom rom i tried it several times before ask for help
M.E.10 said:
i waited for a long time but no thing happen so i thought that the bootloader locked
i'm using the stock rom now but i want to install custom rom i tried it several times before ask for help
Click to expand...
Click to collapse
Generally for installing custom rom this steps should help
Wipe data and cache
Mount system data cache
Flash zip
Reboot
For firmware use where you live from
Mranggapo said:
Generally for installing custom rom this steps should help
Wipe data and cache
Mount system data cache
Flash zip
Reboot
For firmware use where you live from
Click to expand...
Click to collapse
i followed this steps before and it work ,i installed many custom roms before flashing to stock rom and all of them was working well
but when i flash my phone to custom from by using Odin3_v1.84 to flash Galaxy Y 2.3.6 Update (Indian).(DA) i can't install any custom rom again
M.E.10 said:
i followed this steps before and it work ,i installed many custom roms before flashing to stock rom and all of them was working well
but when i flash my phone to custom from by using Odin3_v1.84 to flash Galaxy Y 2.3.6 Update (Indian).(DA) i can't install any custom rom again
Click to expand...
Click to collapse
ok here is what you have to do:
1.go to recovery wipe data wipe cache
2.go to cwm re wipe data and cache again
3.go to mount and storage format system&data&cache then mount every thing
4.go to advance wipe dalvik cache and fix permission
5.flash the rom
if that didn't do it try flashing stock vie one more time and repeat my steps
Which kernal are you stock or custom
If Stock
A problem was being in update binary dealete rom from sdcard downloads again pls do no extract it boot into recovery mode wipe data wiprle cache mount everything wipe dalik cache then flash the rom
If custom
You Don't need downloads again the rom
Boot into recovery mode wipe data wipe cache partion mount everything flash the rom
try to odin it again with old firmware. maybe this will fix your problem.
thanks
thanks for everyone i could install mini rom custom rom by using cwm
and i found that the both roms i tried wasn't work correctly so they fail in installing
M.E.10 said:
thanks for everyone i could install mini rom custom rom by using cwm
and i found that the both roms i tried wasn't work correctly so they fail in installing
Click to expand...
Click to collapse
all roms here work fine
make sure you format system data cache then mount system data cache in cwm before flashing the rom zip
you also need to be on the correct file system and kernel depending on rom - eg stock based kernels for stock based rom and ext file system and a cm kerenl for cm based roms
I,m not developer of this rom.
I,m just updated rom file link from official havoc source..so,all credit goes to developer..
u can Download n install like other Android 10 Rom..:good:
It,s Android 10 Based....
https://sourceforge.net/projects/lc-dev/files/cancro/
Telegram official group for Mi3: https://t.me/micancro
HI.. firstly, thank you for the ROM. I have installed it on my cancro. Couple of questions -
Which version of Gapps? I tried installing PICO or nano (ARM / 10). Both failed - either no space in partition or the package is not the correct version for this OS. Please help.
I also tried installing Play Store apk. But the app never opens and keeps crashing everytime.
Thanks in advance
billa vimal said:
I,m not a developer/expert person..my previous device was Xperia z3.that has Snapdragon 801(arm.v7).
When I try to installing gapps after installing rom I got error..in that device I need to reboot recovery again after installed rom.then I can install gapps..u can try this procedure..#sorry for my bad English..
Click to expand...
Click to collapse
billa vimal said:
HI.. firstly, thank you for the ROM. I have installed it on my cancro. Couple of questions -
Which version of Gapps? I tried installing PICO or nano (ARM / 10). Both failed - either no space in partition or the package is not the correct version for this OS. Please help.
I also tried installing Play Store apk. But the app never opens and keeps crashing everytime.
Thanks in advance
Click to expand...
Click to collapse
Try to find "BiTGApps-arm-10.0.0-v0.6_signed.zip" from internet, it work well with this ROM.
And let me know if you can not find it out!
r30857 said:
Try to find "BiTGApps-arm-10.0.0-v0.6_signed.zip" from internet, it work well with this ROM.
And let me know if you can not find it out!
Click to expand...
Click to collapse
Ah! Thank you so much! Finally, a working Gapps!
Which version of Magisk would work?
billa vimal said:
Which version of Magisk would work?
Click to expand...
Click to collapse
Latest one
Meraj018 said:
Latest one
Click to expand...
Click to collapse
Thank you. The latest one worked and I was able to root my device.
Many Apps are Crashed
Many Apps are crashed in this ROM , like SnapChat and more......
Pls Help..!
r30857 said:
Try to find "BiTGApps-arm-10.0.0-v0.6_signed.zip" from internet, it work well with this ROM.
And let me know if you can not find it out!
Click to expand...
Click to collapse
Hello, on Mi3w Data(f2fs)
First I installed rom, then wipe cahed and dalvik, then reboot to recovery.
Next I tried "BiTGApps-arm-10.0.0-v0.6_signed.zip" but failed sdk version.
Then I tried "open_gapps-arm-10.0-pico-20201204.zip" and no errors at first try. so I wiped cache and dal and reboot again then flashed "Magisk_20.4"
And boot to system.
Reminder, skip pin entering after selecting 3 lock options. face unlock feature crashing and will NOT end SETUP.
BTW this is Great! Thanks! my first exp on AndroidQ.
CarCE12 said:
Hello, on Mi3w Data(f2fs)
First I installed rom, then wipe cahed and dalvik, then reboot to recovery.
Next I tried "BiTGApps-arm-10.0.0-v0.6_signed.zip" but failed sdk version.
Then I tried "open_gapps-arm-10.0-pico-20201204.zip" and no errors at first try. so I wiped cache and dal and reboot again then flashed "Magisk_20.4"
And boot to system.
Reminder, skip pin entering after selecting 3 lock options. face unlock feature crashing and will NOT end SETUP.
BTW this is Great! Thanks! my first exp on AndroidQ.
Click to expand...
Click to collapse
Now I tried
flashing Rom and Gapps(pico) then Wipe Cache and Dalvik
then reboot to recovery then flash Magisk 20.4
(Optional Reboot to recovery I wiped Dalvik, Cache, Data, including Internal Storage.
Then I reboot to recovery again, because my recovery setting will reset after wiping internal storage)
Now reboot to SYSTEM
SETUP REMINDER! (My Mi3w) Face Unlock CRASHING and will NOT end SETUP.
To be safe I did (no sim inserted) Skip Data and Wifi.
Selected "FaceUnlock+Pin" (DO NOT ENTER PIN) "Skip" setup everything later.