Hello people, can you help me please?
I can't install ANY custom roms. I have the latest 2.3.5 official rom.
Here's how I'm doing:
- Backup on CWM
- Wipe everything (factory reset, cache, dalvik cache)
- install zip
- reboot system now.
And then, black screen with Huawei red logo appears and starts to bootloop.
It occurs with any custom rom, I can only use the official one.
What's happening? Maybe I've to enable logcat? If yes, how can i do it trough ADB?
Best regards.
Ok, i've enabled logcat and occurs the same.. bootloops...
When i wipe dalvik-cache this message appears:
"E:unknown volume for path [/sd-ext]"
What does it mean?
I've unlocked the bootloader by doing this: http://forum.xda-developers.com/showthread.php?t=1457490
Well, I tried to flash again the custom roms (CM, Oxygen and MIUI) and made all the wipes, and I get stuck again at the Huawei logo...
Someone please help me?
Are you flashing the .35 kernel versions of the roms? Oxygen wont work as it has a .32 kernel. Whether that would cause a bootloop, I dont know.
PaulMilbank said:
Are you flashing the .35 kernel versions of the roms? Oxygen wont work as it has a .32 kernel. Whether that would cause a bootloop, I dont know.
Click to expand...
Click to collapse
Yes pal, i'm flashing .35 kernels...
Very strange, you know?
http://forum.xda-developers.com/showthread.php?t=1427533 - it is a .35 kernel, isn't it?
Some help, please?
mrasquinho said:
Some help, please?
Click to expand...
Click to collapse
Why dont you try Clockwork mod 5.5.0.4 to apply custom ROMs..
uumeshh said:
Why dont you try Clockwork mod 5.5.0.4 to apply custom ROMs..
Click to expand...
Click to collapse
I'm using it
Sent from my Huawei Ideos X5 using xda premium
Moved To Q&A
Please post all questions in the Q&A section
I've got the same problem as you :/ Please post here if you've solved it.
Damn. Still nothing on this from anyone. I've been researching this for ages, and I can't find anything on anyone being able to solve this problem.
Possible solution!
I found a custom ROM that I could install without getting bootloops!
http://forum.xda-developers.com/showthread.php?t=1481168
Just followed the directions and it actually worked this time!
boot to CWM -> factory reset* -> wipe cache partion & wipe dalvik cache -> format system directory* -> install the ROM from sdcard
I'm thinking that maybe the "format system directory" may be what fixed it... I'm really not sure. Never done that with any other ROM installation, so it would seem like this is a solution.
Related
-Solved btw-
Hey all. I've just tried installing CM9 using the instructions HERE.
I used the second options..
How To Flash ICS(Defy Builds)
1:Head Over To Stable recovery
2:Wipe Data
3:Install ZIp from SD Card
4:Select ICS(Defy) .zip
5:Flash
6:Flash Gapps and CM7 Kernel
7:Clear Cache and Dalvik Cache
Click to expand...
Click to collapse
I used the most recent CM9 rom from here.
(CM9-NIGHTLY-120319-Defy.zip 19-Mar-2012 23:15 104M )
I got my kernels from this thread. I've tried both CM7 (2.2 kernel) and CM9 (2.3 kernel). With the CM7 2.2 Kernel, I get stuck on the "Motorola" logo, and with CM9 2.3 kernel I get stuck on the CM9 boot logo (1 hour + now)
From the FAQ thread I found this (below), but as I said I've tried both kernels.
FAQ:
Q: I installed 08/12 build(or newer), but it gets stuck at the CM boot logo. What do I do?
07/12 contains the required 2.3 kernel. 08/12 and newer do not. If you have installed 08/12 or newer, enter recovery and flash the 2.3 kernel, then reboot. This applies only to Defy owners; Defy+ owners already have 2.3 stock ROM and kernel, so they do not need to apply the kernel.
In fact, the kernel zip for Defy owners is the kernel from Defy+.
Click to expand...
Click to collapse
I've tried everything I can think of. Can anyone help?
Thanks.
pk92 said:
Hey all. I've just tried installing CM9 using the instructions HERE.
I used the second options..
I used the most recent CM9 rom from here.
(CM9-NIGHTLY-120319-Defy.zip 19-Mar-2012 23:15 104M )
I got my kernels from this thread. I've tried both CM7 (2.2 kernel) and CM9 (2.3 kernel). With the CM7 2.2 Kernel, I get stuck on the "Motorola" logo, and with CM9 2.3 kernel I get stuck on the CM9 boot logo (1 hour + now)
From the FAQ thread I found this (below), but as I said I've tried both kernels.
I've tried everything I can think of. Can anyone help?
Thanks.
Click to expand...
Click to collapse
Hi,
Can you also provide the following info:
Which ROM did you have as stock?(Was it a froyo kernel or GB kernel as stock)
If you already had GB ROM in your phone you don't need the kernels to be installed!
It was a Froyo kernel
He's right. U don't have to flash a kernel if u were on froyo (2.6.32.9-gb08c3c8). Just make a wipe after installing the cm9 rom.
U only have to pick the right version. There are froyo-cm9 builds and GB-cm9 builds (so if u are on GB-kernel right now, take a GB-Build).
Or try the "codename android 1.5.5"... (froyo-kernel!) it's ported from the nexus
I'm testing this rom right now and for me it's working much better than cm9 builds.
Greetz
I recieved a pm suggesting installing cm7 then cm9 over, but more bootloop..
Sent from my Huawei_8100-9 using XDA
Oh, its a cm7 bootloop now by the way, forgot to mention that
Sent from my Huawei_8100-9 using XDA
pk92 said:
Oh, its a cm7 bootloop now by the way, forgot to mention that
Sent from my Huawei_8100-9 using XDA
Click to expand...
Click to collapse
Well, I think there is no need to flash cm7 before? (I didn't and it worked, correct me if I talk bull****)
Try to install the zip, and AFTER that make a wipe (do not boot in system after installing, first the wipe than boot!)
Is it a quark or epsy? When I flashed the epsy over quark I had big problems so I had to start again.
I have no idea if it's Quark or Epsy :S
hboy1337 said:
Well, I think there is no need to flash cm7 before? (I didn't and it worked, correct me if I talk bull****)
Try to install the zip, and AFTER that make a wipe (do not boot in system after installing, first the wipe than boot!)
Is it a quark or epsy? When I flashed the epsy over quark I had big problems so I had to start again.
Click to expand...
Click to collapse
pk92 said:
I have no idea if it's Quark or Epsy :S
Click to expand...
Click to collapse
Hi,
Well you are correct you do not need to flash CM9 above CM7! it's Quark or Epsy do not matter. What matters is the kernel! If you have a Defy+ or stock GB use the CMs for Defy+(preferably Quarx's because they are more updated and he is the only dev with a Defy+) and don't flash any extra kernels. If you have Defy or Froyo kernel then use CMs for Defy. Always remember two golden rules after flashing ROMs:
1.) Wipe data.
2.) Wipe Dalvik.
In fact even after or before a full SBF you may not be able to boot until you do a data wipe from stock recovery! (Seen that in some cases and in mine case too!) ....
pranks1989 said:
Hi,
Well you are correct you do not need to flash CM9 above CM7! it's Quark or Epsy do not matter. What matters is the kernel! If you have a Defy+ or stock GB use the CMs for Defy+(preferably Quarx's because they are more updated and he is the only dev with a Defy+) and don't flash any extra kernels. If you have Defy or Froyo kernel then use CMs for Defy. Always remember two golden rules after flashing ROMs:
1.) Wipe data.
2.) Wipe Dalvik.
In fact even after or before a full SBF you may not be able to boot until you do a data wipe from stock recovery! (Seen that in some cases and in mine case too!) ....
Click to expand...
Click to collapse
What I usually do when installing roms is this:
-Enter Stable Recovery
-Factory reset & clear data
-Install Zip from SD Card (Defy CM9.zip)
-Wipe cache
-Wipe dalvik cache.
So I need to do a Factory reset & data wipe in stock before flashing CM9?
I've managed to get the CM9-NIGHTLY-120112-Defy+.zip rom working from here.
I installed the CM7 kernel, then the CM9 kernel ontop of that, then installed gapps, and wiped cache/dalvik. (though I'm not sure wiping dalvik worked, as when I clicked it it just refreshed, didn't give me the option to confirm that I want to wipe dalvik)
However, this doesn't have any mobile network, and a lot of settings options are missing..
I'm still trying to get the CM9-NIGHTLY-120319-Defy.zip rom working from here working, but it's stuck on the bootloop.
If I try the baseband switcher in-rom then it asks me to restart, and then once it has restarted it goes back to factory settings (the welcome screen to set up the "new" phone)
pk92 said:
I've managed to get the CM9-NIGHTLY-120112-Defy+.zip rom working from here.
I installed the CM7 kernel, then the CM9 kernel ontop of that, then installed gapps, and wiped cache/dalvik. (though I'm not sure wiping dalvik worked, as when I clicked it it just refreshed, didn't give me the option to confirm that I want to wipe dalvik)
However, this doesn't have any mobile network, and a lot of settings options are missing..
I'm still trying to get the CM9-NIGHTLY-120319-Defy.zip rom working from here working, but it's stuck on the bootloop.
If I try the baseband switcher in-rom then it asks me to restart, and then once it has restarted it goes back to factory settings (the welcome screen to set up the "new" phone)
Click to expand...
Click to collapse
For CM9 you can do a data wipe from CWm itself, don't do from stock. Only if you do a full SBF flash do a data wipe from stock. And the CM9 you are using is toooo old!!! Quarx's CM9 for Defy+ are much newer! So try that here . 17th March is the latest one. That should run fine.. Worked great for me..
Hey I see once you were using CM for Defy(Dint work for you as you got bootloop) and next moment you were trying CM9 for Defy+(which worked) !!! :O First be sure which kernel you have in your original ROM(flashed SBF)!!
pranks1989 said:
For CM9 you can do a data wipe from CWm itself, don't do from stock. Only if you do a full SBF flash do a data wipe from stock. And the CM9 you are using is toooo old!!! Quarx's CM9 for Defy+ are much newer! So try that here . 17th March is the latest one. That should run fine.. Worked great for me..
Hey I see once you were using CM for Defy(Dint work for you as you got bootloop) and next moment you were trying CM9 for Defy+(which worked) !!! :O First be sure which kernel you have in your original ROM(flashed SBF)!!
Click to expand...
Click to collapse
I eventually decided to flash a froyo SBF (2.2.2), and flashed CM9 Defy from here. Suggested to me by Pottkopp.
I didn't flash any kernel and it worked fine.
Also installed Pottkopp's AIO.
So, all solved
Can someone help me?
Ok!
So i have green lensed defy. I already had CM9 installed( installed it using normal procedure). So i decided i will return to stock, by recovering backup. So i did. After a while on stock, i decided to go back to CM9. I forgot to do factory reset, and after install wipe chache and dalvik.I booted phone, and entered requesting data. I after that got back to recovery and did factory reset via custom recovery, and installed it again using correct method. My phone seems a bit slower than before, and did i damaged my phone?
hey, i want to upgrade my ideos x5 from android 2.2 to oxygen 2.3.2 but all i get a bootloop. Solutions?
Have you tried wiping data and dalvik? Try do re-download the ROM, if not, download the stock ROM again (I suggest B138 or B163) and redo the flash.
You can download the stock ROMs and Oxygen HERE if you want. Be sure not to flash any ROMs intended for Ideos X5PRO if you have the normal Ideos. Check under the battery!
and when i installed oxygen and started to install 2.2 froyo back i had to push the sd card deeper that it would work and now i'm back to 2.2 and sd card works like a charm :S it's a 8gb sdhc thanks for the stock roms link btw and i will try to install oxygen again later if someone could make me an step by step manual
I think i will backup my froy to internal sd card just in case.
I wipe dalvik and cache and now i'm stuck in huawei logo... but i can still access cwm recovery.
Guess i can't get oxygen for my phone......
naamakala12345 said:
I wipe dalvik and cache and now i'm stuck in huawei logo... but i can still access cwm recovery.
Guess i can't get oxygen for my phone......
Click to expand...
Click to collapse
Are you using 5.0.2.6 recovery? Whipe data as well. Sometimes you need to flash the rom twice.
Yeah i have that, and i allways wipe the data before i flash it and i have flashed it several times but it just doesnt seem to work
actually i have cwm 5.5.0.4
naamakala12345 said:
Yeah i have that, and i allways wipe the data before i flash it and i have flashed it several times but it just doesnt seem to work
actually i have cwm 5.5.0.4
Click to expand...
Click to collapse
5.5.0.4 and 5.0.2.7 is for .35 kernel roms and 5.0.2.6 and 4.xxx are for the old .32 roms. So install this recovery: 5.0.2.6
and then whipe again, to be sure, and flash oxygen again.
Try out Version : V100R001C00B528G001
--------http://forum.xda-developers.com/showthread.php?t=1369296
~02.03.2012~ 【U8800】 2.3 Official Update 【Latest】
--------http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDEyNTU=
I'm gonna try the recovery out and let you know
cokratex said:
5.5.0.4 and 5.0.2.7 is for .35 kernel roms and 5.0.2.6 and 4.xxx are for the old .32 roms. So install this recovery: 5.0.2.6
and then whipe again, to be sure, and flash oxygen again.
Click to expand...
Click to collapse
it worked thanks!!
i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
aman95 said:
i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
Click to expand...
Click to collapse
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
vlc07 said:
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
Click to expand...
Click to collapse
can you explain, how to flash kernel. i think, i am facing problem dping this
aman95 said:
can you explain, how to flash kernel. i think, i am facing problem dping this
Click to expand...
Click to collapse
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
marcussmith2626 said:
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
Click to expand...
Click to collapse
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
aman95 said:
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
Click to expand...
Click to collapse
Flash instructions are given in the rom thread only.
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
aman95 said:
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
Click to expand...
Click to collapse
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
redndian said:
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
Click to expand...
Click to collapse
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
aman95 said:
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
Click to expand...
Click to collapse
you can add your own task manager to the framework or use an app from the playstore
and dont ask to crack apps to get paid versions or i'll report if this continues
Hello every body
I have a Huawei ascend G700 and i tried to install TWRP recovery and I could install it on official rom. BUT after wipe dalvic cache, cache and etc... and reboot, my device stuck in boot logo page and I think it has been boot looped.
Now how can I fix it?!
Please help me :crying::crying::crying:
Well, you probably wiped /system.. I would suggest finding a custom ROM and flash that. You might be able to find stock images. I don't see why you erased your partitions though..
KawaiiAurora said:
Well, you probably wiped /system.. I would suggest finding a custom ROM and flash that. You might be able to find stock images. I don't see why you erased your partitions though..
Click to expand...
Click to collapse
That's because I'm newbie and I had no idea what to do!!! is there any way to back to official rom and official recovery? Unfortunately I have not provided any backup files. :crying::crying::crying::crying:
Please help me :crying:
PersianEngineer said:
That's because I'm newbie and I had no idea what to do!!! is there any way to back to official rom and official recovery? Unfortunately I have not provided any backup files. :crying::crying::crying::crying:
Please help me :crying:
Click to expand...
Click to collapse
http://firmwarefile.com/huawei-ascend-g700-u10
Try that
It's an Indian version but it might work with what you want! ^^ Remember, BACKUP before attempting anything.
KawaiiAurora said:
Try that
It's an Indian version but it might work with what you want! ^^ Remember, BACKUP before attempting anything.
Click to expand...
Click to collapse
Do you think, is it possible to install this rom via TWRP recovery?! I tried to install MiUI but after touch on Install button in TWRP recovery, its show me the first page of the recovery!!!:crying::crying::crying:
PersianEngineer said:
Do you think, is it possible to install this rom via TWRP recovery?! I tried to install MiUI but after touch on Install button in TWRP recovery, its show me the first page of the recovery!!!:crying::crying::crying:
Click to expand...
Click to collapse
I'm not sure.. You could try. You could also try using the bundled flashing program.
BOOT LOOP Huawei G700-U10
Hi,
If your problem is not still solved, you may please reply back. I will try to bring your G700-U10 back to stock rom with full functionality
PersianEngineer said:
Hello every body
I have a Huawei ascend G700 and i tried to install TWRP recovery and I could install it on official rom. BUT after wipe dalvic cache, cache and etc... and reboot, my device stuck in boot logo page and I think it has been boot looped.
Now how can I fix it?!
Please help me :crying::crying::crying:
Click to expand...
Click to collapse
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
MASK10101012 said:
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
Click to expand...
Click to collapse
Reboot to recovery>>wipe system, data, cache, dalvik cache>>install zip>>select MIUI zip>>reboot
Note: Sometimes, the MIUI rom shows error at first time. So again select install zip and select the MIUI zip, without rebooting.
sasukay said:
Reboot to recovery>>wipe system, data, cache, dalvik cache>>install zip>>select MIUI zip>>reboot
Note: Sometimes, the MIUI rom shows error at first time. So again select install zip and select the MIUI zip, without rebooting.
Click to expand...
Click to collapse
I didn't reboot at all,did it just like above ^^
MASK10101012 said:
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
Click to expand...
Click to collapse
Try to flash stock rom first then flash miui rom.
Hope this help
MASK10101012 said:
I didn't reboot at all,did it just like above ^^
Click to expand...
Click to collapse
Okay, so try this, reboot into recovery, wipe the directories, then choose reboot to recovery from reboot option....then flash the MIUI zip
I have same problem tomorrow.
I have same problem tomorrow when I was flashing ASUS ZenFone UI Rom.It was get error7 so I will try twrp 3 new version.But no effect then I will again flashed my old twrp and then flash it's work for me.
I were wipe cache only....(do not full wipe,system,data,internal former)
I hope this method is work.
sasukay said:
Okay, so try this, reboot into recovery, wipe the directories, then choose reboot to recovery from reboot option....then flash the MIUI zip
Click to expand...
Click to collapse
Okay so I need more help. I think I'll also be flashing phantom kernel.after installing miui. Haven't started yet but will soon. The problem is that I'm a complete noob with kernels. So... What are the things I'm gonna have to do ? CM12.1 just keeps getting worse with each update .??
MASK10101012 said:
Okay so I need more help. I think I'll also be flashing phantom kernel.after installing miui. Haven't started yet but will soon. The problem is that I'm a complete noob with kernels. So... What are the things I'm gonna have to do ? CM12.1 just keeps getting worse with each update .����
Click to expand...
Click to collapse
Just download the zip and flash it. And set the settings as mentioned in the phantom kernel post using Kernl Adiutor app.
sasukay said:
Just download the zip and flash it. And set the settings as mentioned in the phantom kernel post using Kernl Adiutor app.
Click to expand...
Click to collapse
OK I'll start soon. I hope I have no probs.. Thanks!