I'm sorry for the formulation, I use a translator.
I got the device in question but it does not turn on. I tried to reinstall it, flashtool went all the way without any error signal. But he did not turn it on. I watched a memtest start, I ran into the undersigned error message:
NAND Flash:
ERROR: NAND Flash was not detected!
What can I do with this ?! SOS!
Related
Hello everyone,
I ve been searching the forum for a solution on the No GSM error on my hw6925 and cant find a working one.
I was trying to put the OS to spanish and got an error and wouldnt pass the HP logo screen. I have successfully restored back to the English OS but still have the No GSM error. I have tried loading only the RadioFS.nbf and RadioOS.nbf using the Sable_RUU.exe with no luck, it gets stuck an "Flash WAN OS: 1%" and gives an error:
Client_Progress Fail !! Error : 201
Can someone help/guide me please.
Thanks.
Hello,
I Flashed my P3600 starting from WM 5 with Trinity_Rom_NiAl_Build_23504.
It worked but not at all (pine nuts) so I decided to upgrade again.
The second one, the upgrade stopped while he was runnung and I did the recovery procedure as suggested by the upgrade.
Now when I connect in bootloader mode to pc USB connection is activated.
But every rom version i try to flash I got the Message Error[270] Update Error
Ur Image file is corrupted.
The bar % run till 1% and the device swich off immediatly.
In >Bootloader<
TRIN100
IPL-0.50
Trin100
SPL-1.06.0000
Please Help me.
Thank You
msmbrt said:
Hello,
I Flashed my P3600 starting from WM 5 with Trinity_Rom_NiAl_Build_23504.
It worked but not at all (pine nuts) so I decided to upgrade again.
The second one, the upgrade stopped while he was runnung and I did the recovery procedure as suggested by the upgrade.
Now when I connect in bootloader mode to pc USB connection is activated.
But every rom version i try to flash I got the Message Error[270] Update Error
Ur Image file is corrupted.
The bar % run till 1% and the device swich off immediatly.
In >Bootloader<
TRIN100
IPL-0.50
Trin100
SPL-1.06.0000
Please Help me.
Thank You
Click to expand...
Click to collapse
Error may appear due to corrupt image ROM. download the entire RUU and try again.
In General for archive with firmware.
I've already tried with another RUU but it works the same; really it means not to recognize the ROM installed because if I run the utility and click update to read the ROM just installed and the ROM to update, the utility recognizes only the new but not the present ROM.
The first time I ran it, the utility recognized the installed ROM too and it finished well.
msmbrt said:
I've already tried with another RUU but it works the same; really it means not to recognize the ROM installed because if I run the utility and click update to read the ROM just installed and the ROM to update, the utility recognizes only the new but not the present ROM.
The first time I ran it, the utility recognized the installed ROM too and it finished well.
Click to expand...
Click to collapse
Well.
In an active sinc disconnect connection on USB
- Download splxploit_HTC_Trinity
- Unpack and start
- Then stitch...
Should work
hello guys, I have this problem: I'm using ROM manilla 2D from Josh, but it's very slow, it takes about 5min to boot and start. Second problem is the anouncement in start screen: No GSM. I know, radio rom is missing. But when I tried to upgrade radio or other ROM via pc, it's saing: error 262 or 260. I tried it with windows installers, with RUU, with device in bootloader mode, but no efect. When I'm flashing via SD card, it says numerical error (few numbers in red) can somebody help me to fix it? Thx
and when I'm trying to update it via USB in bootloader mode, it begins good, but about 2% it says: Error 270 - Image file is corrupted. Help pls
Hi, I need some help from you guys. I flashed WP7 for my HD2, everything was good. But I accidentally unregistered my phone by 'Windows Phone Developer Registration'. And I failed to register it again.
'Error communicating with the developer portal. Please set the correct data and time on the phone, check the Internet connection and try again later (ErrorCode:0x64)' was the error message.
And I failed to flash the ROM or reinstall the MAGLDR113 once again on my phone.
'Error Description: USB init failed; Info: .\RSPL\RSPL.cpp(1198)' was the error message when I tried to flash the ROM again.
How can I fix my problem?
zhaoch25 said:
Hi, I need some help from you guys. I flashed WP7 for my HD2, everything was good. But I accidentally unregistered my phone by 'Windows Phone Developer Registration'. And I failed to register it again.
'Error communicating with the developer portal. Please set the correct data and time on the phone, check the Internet connection and try again later (ErrorCode:0x64)' was the error message.
Click to expand...
Click to collapse
Similar problem here.
I flashed my HD2 with a custom ROM that already had the jailbreak baked into. Yesterday I purchased a developer program membership and thought I might legally register the phone.
I startet the registration tool from the Windows Phone Developer Tools and it said the phone was already registered. I managed to successfully unregister the phone but then, when trying to reregister it using my Live ID, I got the same error message (ErrorCode:0x64).
A lot of people at the developer forum on MSDN are complaining about this error as well. A couple of them said the registration tool wouldn't work on 64bit Windows. Some of them installed Windows 7 x86 on a virtual machine and tried to register their phone from there and it worked.
I am going to give it a try, too.
Did you have any success in the meantime?
Hello everyone,
Im noob kindly help me out.
I've Ac8227L, YT9216B, i download firmware and try to install in my car head unit ( Chinese) through flash tool. It format all software of head unit and at the time of download or upgrading flash tool stuck at Download Da 100% and an error poo up by the name of
Error: "S_FT_ENABLE_DRAM_FAIL (4032)"
[EMI]: Enable DRAM fail.
Hint: Please check your load matches to your target which is to be downloaded.
Kindly help me out to get out of this problem. Now my car head unit don't have any software when i turn it on its totally blank screen without any thing.
Alikhalid1132 said:
Hello everyone,
Im noob kindly help me out.
I've Ac8227L, YT9216B, i download firmware and try to install in my car head unit ( Chinese) through flash tool. It format all software of head unit and at the time of download or upgrading flash tool stuck at Download Da 100% and an error poo up by the name of
Error: "S_FT_ENABLE_DRAM_FAIL (4032)"
[EMI]: Enable DRAM fail.
Hint: Please check your load matches to your target which is to be downloaded.
Kindly help me out to get out of this problem. Now my car head unit don't have any software when i turn it on its totally blank screen without any thing.
Click to expand...
Click to collapse
I'm having the same issue.
I had my unit working fine and had flashed a couple other ROMs already. I was trying several different ROMs and now I get this error. I tried to go back to a ROM that worked before and it will not flash either.
i have the same problem. has anyone found a solution please?
i was trying to upgrade my 1692bj unit and now its bricked i think. blank screen. unable to do memeory dump. i have downloaed firmware from Xyauto. i have tried two point recvery too but getting error