Hello everyone,
Im noob kindly help me out.
I've Ac8227L, YT9216B, i download firmware and try to install in my car head unit ( Chinese) through flash tool. It format all software of head unit and at the time of download or upgrading flash tool stuck at Download Da 100% and an error poo up by the name of
Error: "S_FT_ENABLE_DRAM_FAIL (4032)"
[EMI]: Enable DRAM fail.
Hint: Please check your load matches to your target which is to be downloaded.
Kindly help me out to get out of this problem. Now my car head unit don't have any software when i turn it on its totally blank screen without any thing.
Alikhalid1132 said:
Hello everyone,
Im noob kindly help me out.
I've Ac8227L, YT9216B, i download firmware and try to install in my car head unit ( Chinese) through flash tool. It format all software of head unit and at the time of download or upgrading flash tool stuck at Download Da 100% and an error poo up by the name of
Error: "S_FT_ENABLE_DRAM_FAIL (4032)"
[EMI]: Enable DRAM fail.
Hint: Please check your load matches to your target which is to be downloaded.
Kindly help me out to get out of this problem. Now my car head unit don't have any software when i turn it on its totally blank screen without any thing.
Click to expand...
Click to collapse
I'm having the same issue.
I had my unit working fine and had flashed a couple other ROMs already. I was trying several different ROMs and now I get this error. I tried to go back to a ROM that worked before and it will not flash either.
i have the same problem. has anyone found a solution please?
i was trying to upgrade my 1692bj unit and now its bricked i think. blank screen. unable to do memeory dump. i have downloaed firmware from Xyauto. i have tried two point recvery too but getting error
Related
Hello. I wanted to upload android 8 using modinstaler pro from hal9k. I did everything as in the youtube movie. I installed modinstaler pro on the radio and installed the update file on usb.
I turned on modinstaler pro and pressed android 8. After pressing Ok, the radio turned itself off and does not turn on.
I don't know what to do now or how to turn on the radio. am radio android 6 mtce px5.
With very little detail as to what has been tried to recover, suggest the following. Always provide detail to help others help you, there is inly frustration in guessing games.
Try recovery steps listed in that thread, if unable to recover use OTG method listed in my signature.
Let me explain in vreve .... I installed this rom
https://forum.xda-developers.com/android-auto/android-head-units/everything-yt9216b-t4007063
but I had a problem with the reversing camera, black screen, then I tried to install a different rom, but the same as mine and stock, when I gave the command to sp flash tool, Firmware Upgrade was selected, so it made me the format of the head unit, obviously the rom did not finish the flash, and I had to open the unit to make the test point, in the firmware upgrade the preloader was also selected (other bull**** made), in the end on 4pda I read cge maybe it could have been EMMC_PART_BOOT1 corrupted due to the format, so following the instructions I wrote one equal to mine in the head unit, now after several attempts I managed to install its firmware, only that it turns on, shows the androi logo, then reboots and goes into recovery .....
Please help me, I'm getting mad since this morning, how can I solve ...
A heartfelt thanks to all !!
A step forward....
djmrloop said:
Let me explain in vreve .... I installed this rom
https://forum.xda-developers.com/android-auto/android-head-units/everything-yt9216b-t4007063
but I had a problem with the reversing camera, black screen, then I tried to install a different rom, but the same as mine and stock, when I gave the command to sp flash tool, Firmware Upgrade was selected, so it made me the format of the head unit, obviously the rom did not finish the flash, and I had to open the unit to make the test point, in the firmware upgrade the preloader was also selected (other bull**** made), in the end on 4pda I read cge maybe it could have been EMMC_PART_BOOT1 corrupted due to the format, so following the instructions I wrote one equal to mine in the head unit, now after several attempts I managed to install its firmware, only that it turns on, shows the androi logo, then reboots and goes into recovery .....
Please help me, I'm getting mad since this morning, how can I solve ...
A heartfelt thanks to all !!
Click to expand...
Click to collapse
Good morning forum, I update you, I managed to sew boot 1 to the preloader, I tried to flash the same rom that gave me problems with the reversing camera, and now the head unit turns on and goes into boot without then going into recovery, but it remains with the fixed logo and does not go on .... Do you have any suggestions? What can I try to do to solve this problem ?? Thanks in advance, to anyone who will have a good heart to help me ..
Solved great....
I just solved everything ...... I also made a little culture about these units....
Try this brand new guide
Hi everyone
I have a chinese car stereo with dvd brand ar 6002b
android 6.0.1
mcu: 2017.10.23: 09: 49: 07 fY_ (NOR) _90_C9_7706_6023_NEWLAP_ 18E
PROCESSOR
CPUintel atom 4quadcore gpu4d mali-450 MP4 ROCKCHIP
i tried to change firmware trying with joyng ones, i tried your custom gtx
but i have problems with
audio. the volume does not work, the radio does not work and a green bar remains at the top with Chinese writings and it does not go away even when modifying the prop file.
after several searches I found a perfect firmware where everything works even updated to android 8.0.1
but it has a different bigger resolution, my car stereo is 800x480 and the firmware should be 1024x600
the question is: is there a possibility to change the resolution to 800x400?
thanks in advance for any help
sorry I don't speak English, I made do with google translator, I hope you understand
hello in the meantime thanks for the answer you could be a little more specific about the analysis launcher
firmware per autoradio 6,2'' dvd 800x480
hello everyone I ask you for help because I have been looking for days but I have not found anything that works apart from a firmware which however does not enter the screen because it has a resolution of 1024x600 while my car radio is 800x480. there is a firmware for this car radio which as already specified is
android 6.0.1
mcu: 2017.10.23: 09: 49: 07 fY_ (NOR) _90_C9_7706_6023_NEWLAP_ 18E
PROCESSOR
CPUintel atom 4quadcore gpu4d mali-450 MP4 with dvd, 6.2 '' , ram 1gb, 16gb rom would really appreciate it
as long as it works
grazie
I don't want to sound insistent but the only thing I ask you is to know if I have to resign myself or someone from this forum can provide me with a link (if any) for the firmware of this car radio that I have described in the posts above thanks
is there someone so kind who can recommend me a firmware to install on the car radio in question I would be really gratefu,l any version of android is fine, as long as it works now the car radio is out of order because I can't find a firmware that works
thank you very much for your answer I try the firmware and let you know
I can't install the firmware, I insert the USB key the installation starts and after a while it stops with error: verification signature failed, I have this error with any firmware you try to install this error appears to me since I installed the latest firmware from recovery the firmware was new sofia4, i can't enter the recovery i can't install a recovery through adb because the pc doesn't recognize the car radio. before installing new sofia4 all the firmware installed perfectly i would be really grateful if someone told me how to avoid this error and finish installation thanks
https://docviewer.yandex.ru/view/0/?*=0vqR9df8vurirs009cat8wFYH0Z7InVybCI6InlhLWRpc2stcHVibGljOi8vQ1dueWZoYjBBbzRuNnVrczVaYU9CNWpFK3J6a2IyTTRIcHViUSs3ejZxVT06L0ludGVsIFNvZmlhM2cvTmV3NF9zb2ZpYV82LjBfM2coMjAxNzA0MjQpLjd6IiwidGl0bGUiOiJOZXc0X3NvZmlhXzYuMF8zZygyMDE3MDQyNCkuN3oiLCJub2lmcmFtZSI6ZmFsc2UsInVpZCI6IjAiLCJ0cyI6MTU5ODE5NjIyNzM4NywieXUiOiIxMTk1OTk4ODUxNTk3ODc4MDQ5In0%3D
hello thanks for answering me I can't load the firmware from loading error I put the firmware link currently I have the written android in loop without being able to enter recovery I tried all the possible key combinations by inserting a usb with firmware start installation and yes stop with signature verification failed error thank you again
https://docviewer.yandex.ru/view/0/...yNzM4NywieXUiOiIxMTk1OTk4ODUxNTk3ODc4MDQ5In0=
hello thanks for answering me I can't load the firmware it gives me loading error, I put the firmware link. currently I have the android written in loop without being able to enter recovery, I tried all the possible key combinations by inserting a usb with firmware starts installation and stops with signature verification failed error thank you again
sorry if I am a bit insistent but I need to know if anyone knew how to proceed to solve the problem during the firmware installation ... signature verification failed. I have this error since I recovered the firmware newsofia.zip of the which I have inserted the link to the previous post. now I can not enter recovery because I have tried a thousand procedures and in recovery it does not go there. at start up on the car radio I have the written android in loop I do not know how to install the firmware that recommended me a user of this forum I can not try to install a recovery via adb because the pc does not recognize the car radio I would be really grateful for any help. thank you
nnickolas78 said:
Hi everyone
I have a chinese car stereo with dvd brand ar 6002b
android 6.0.1
mcu: 2017.10.23: 09: 49: 07 fY_ (NOR) _90_C9_7706_6023_NEWLAP_ 18E
PROCESSOR
CPUintel atom 4quadcore gpu4d mali-450 MP4 ROCKCHIP
i tried to change firmware trying with joyng ones, i tried your custom gtx
but i have problems with
audio. the volume does not work, the radio does not work and a green bar remains at the top with Chinese writings and it does not go away even when modifying the prop file.
after several searches I found a perfect firmware where everything works even updated to android 8.0.1
but it has a different bigger resolution, my car stereo is 800x480 and the firmware should be 1024x600
the question is: is there a possibility to change the resolution to 800x400?
thanks in advance for any help
sorry I don't speak English, I made do with google translator, I hope you understand
Click to expand...
Click to collapse
hi nnickolas78
do u still have that firmware with the resolution 1024x600? my unit is Allwinner T8 2gb 32gb
thanks
Hi everyone
I opened a new post because the problem I have is different from the one I had in the previous post.
I had the problem of not finding a firmware for my Chinese car stereo. list the features
mcu: 2017.10.23: 09: 49: 07 fY_ (NOR) _90_C9_7706_6023_NEWLAP_ 18E
PROCESSOR
CPUintel atom 4quadcore gpu4d mali-450 MP4 ROCKCHIP
it has the dvd should be sofia 3gr because it has the 4g slot for the sim card
the car radio brand is ar6002b this:
https://it.aliexpress.com/i/32844402782.html
I tried many firmware and it made me install them all without errors only that either the speakers did not work or the volume did not work properly, I have the latest firmware that I could install is this:
https://docviewer.yandex.ru/view/0/?*=NRuIb5k%2Buqs71e5VUE2pQQGTRKJ7InVybCI6InlhLWRpc2stcHVibGljOi8vQ1dueWZoYjBBbzRuNnVrczVaYU9CNWpFK3J6a2IyTTRIcHViUSs3ejZxVT06L0ludGVsIFNvZmlhM2cvTmV3NF9zb2ZpYV82LjBfM2coMjAxNzA0MjQpLjd6IiwidGl0bGUiOiJOZXc0X3NvZmlhXzYuMF8zZygyMDE3MDQyNCkuN3oiLCJub2lmcmFtZSI6ZmFsc2UsInVpZCI6IjAiLCJ0cyI6MTU5ODQzOTgyMzU1MywieXUiOiIxMTk1OTk4ODUxNTk3ODc4MDQ5In0%3D
I installed this firmware from recovery, after installing this firmware any firmware (which previously installed me correctly) now I insert the usb key part of the installation and it gives me an error (verification signature failed, last flaged sofia6.0, fixed sofia to wifi, start parse board config after)
I don't have the possibility to enter recovery because it gives me an error:
supported api: 3
last flagged sofia 6.0
error whait here.
I do not have the possibility to connect it to the pc because it does not recognize it I have tried several drivers, if anyone can help me I would be really grateful
thank you
after 10 days of testing yesterday I finally managed to restore the situation.
I briefly explain what I did:
before installing the firmware that had caused the problem I had installed a recovery that is used to install
the custom rom gtx 9 but even if I tried to enter it I could not
then without any hope I copied the firmware gtx v9 on a usb stick
I did the procedure from the keyboard to enter recovery (alt- stamp list- e)
the car radio restarted and the recovery magically appeared and did everything by itself without me touching anything.
now i can install any firmware without errors
I have only one problem left that I am trying to solve, the DVD does not recognize me I do not know if it is enough to install an apk to make it recognize
there is someone who knows how to recognize the car radio dvd, a green writing appears at the top with dvd and other words in Chinese equal to that, now I have installed the gtx v9
but i have the dvd problem
thanks for any reply
Hi All,
i have problem with my china android Headunit i tried to install root from this post "https://forum.xda-developers.com/t/...droid-8-1-2020-twrp-magisk-and-dolby.4205037/"
my head unit is YT9216CJ 2Gb Ram 16 GB Rom, and according to this instruction i changed 2 files in original file ( preloader.bin and recovery.img ) but when i flashed by Flash Tool my radio is dead, in 99% i also tick preloader so this is probably the reason why now i have pice of brick not a radio ;(
only buttons are highlight, i tried to unbrick by test point but Flash tool always send me a error "Enlabe DRAM Fail".
In the picture is the last version of software what I have in this device
My computer have windows 10
Guys could you please help me ?
Sorry for my English
Nobody doesn't have any ideas how to fix this ?
maybe somebody can send me memory dump from equal device ?
i think i tried almost everything, every time is ended on Flash tool error DRAM Enable Failed,
szefuncio2015 said:
Hi All,
i have problem with my china android Headunit i tried to install root from this post "https://forum.xda-developers.com/t/...droid-8-1-2020-twrp-magisk-and-dolby.4205037/"
my head unit is YT9216CJ 2Gb Ram 16 GB Rom, and according to this instruction i changed 2 files in original file ( preloader.bin and recovery.img ) but when i flashed by Flash Tool my radio is dead, in 99% i also tick preloader so this is probably the reason why now i have pice of brick not a radio ;(
only buttons are highlight, i tried to unbrick by test point but Flash tool always send me a error "Enlabe DRAM Fail".
In the picture is the last version of software what I have in this device
My computer have windows 10
Guys could you please help me ?
Sorry for my English
Click to expand...
Click to collapse
Hi I have similar device but my device is not detected by my computer. How can I take so flash tool backup
Hi I have made a video tutorial on how to make stock ROM backup
Hi friends,
Have you are observed overheating of touch panel of your car stereo or hangs in your Android car stereo or system not responding or application keep crashing etc.
Then this video is for you. I have done this small modification in my car.
I made a small hole on sides of AC vents such that cool air blows over the heat sink of Android car stereo and two cpu fans of 12V take power supply from same connector.
Whenever the car stereo is turned ON the fans also turn ON and blow cool air over the heat sink to keep it cool.
Hi I have made a updated video tutorial with added info on how to make stock ROM backup.
[UPDATE][ROM Dump] Stock ROM backup of Android Car Stereo | Memory Dump Procedure via flashtool
Try this brand new guide