Related
Hello
Is there a way to get the Mate 8 back to a completely stock Android release from Google? (preferably Marshmallow 6.0)
I can't stand this EMUI stuff.
I have the NXT-L09
NXT-L09C636B191
EMUI 4.0
Unlock BL
Root
TWRP
Then.flash the Huawei debilitating script after installing your favourite stock apps
bluheart said:
Unlock BL
Root
TWRP
Then.flash the Huawei debilitating script after installing your favourite stock apps
Click to expand...
Click to collapse
Sorry, I am very new to this.. what is BL? How do I root? what is TRP?
is there a link to a guide on this?
Boot loader unlocking
Check here
bluheart said:
Boot loader unlocking
Check here
Click to expand...
Click to collapse
Followed it, step by step.
I can't get it to do anything else other than go into Huawei eRecovery
Very Frustrating.
The guide just says "Then Root it".... how???
Root via supersu
First unlock boot via code
Then flash TWRP
Then flash Supersu.zip
Then Format internal storage
Then supersu again
Then reboot
bluheart said:
Root via supersu
First unlock boot via code
Then flash TWRP
Then flash Supersu.zip
Then Format internal storage
Then supersu again
Then reboot
Click to expand...
Click to collapse
That's my issue. I did the TWRP flash..
C:\Users\robby\Downloads\Fastboot>fastboot flash recovery TWRP-ENG-6.0.img
target reported max download size of 471859200 bytes
sending 'recovery' (26954 KB)...
OKAY [ 0.588s]
writing 'recovery'...
OKAY [ 0.450s]
finished. total time: 1.044s
C:\Users\robby\Downloads\Fastboot>fastboot reboot
rebooting...
finished. total time: 0.024s
Then when I reboot, I can't get into TWRP by holding power and volume up.. it just goes into huawei recovery..
there is no way for me to flash SuperSU
okay, um....u can just save urself a lot of trouble, because there is no stock android firmware directly from google EMUI is all you get for this phone
u can only install google apps, an alternative launcher and clean up your system apps via root to get "closer" to stocl android, but it still wont be stock android!
concerninf reboot into recovery, try all button combinations!
1: vol up + power
2: vol down + power
3: vol up + vol down + power
one of them will work and bring u into twrp
Sent from my Huawei Mate 8 NXT-AL10
jbmc83 said:
okay, um....u can just save urself a lot of trouble, because there is no stock android firmware directly from google EMUI is all you get for this phone
u can only install google apps, an alternative launcher and clean up your system apps via root to get "closer" to stocl android, but it still wont be stock android!
concerninf reboot into recovery, try all button combinations!
1: vol up + power
2: vol down + power
3: vol up + vol down + power
one of them will work and bring u into twrp
Sent from my Huawei Mate 8 NXT-AL10
Click to expand...
Click to collapse
seems power + Volume UP and DOWN worked.. but it's all in italian?
Very frustrating that EMUI is all I can get. My phone says it's on 4.0 - can I get a new version?
XexcessiveX said:
seems power + Volume UP and DOWN worked.. but it's all in italian?
Very frustrating that EMUI is all I can get. My phone says it's on 4.0 - can I get a new version?
Click to expand...
Click to collapse
I think I've managed to root it!!! SuperSU APP seems to confirm it.
now, Huawei Debilatating Script?
Debloating script
Here
Flash after reading carefully.
More help is here
If your device has unlocked boot loader and for some reason you just tried to flash something and it went wrong then there is no problem guys. The simplest solution if you are stuck on boot is that press vol down and power key for 3 minutes. It will work and will reboot. No before rebooting into the phone just go to the recovery by pressing the vol up key on boot process. This will load you in eRecovery of huawei. From there you can power off the phone. Now take out the sd card and put the desired rom in it. If you want stock android then you need to put UPDATE.APP in the dload folder in sd card and then go to eRecovery again. If you have a twrp recovery then you can go to stock as well and switch to a custom rom as well. Just place custom rom zip file and gapps zip file and flash it through twrp recovery.
For custom roms and recover visit :
Meticulus.co.vu
Thank you if I ever need it. Maybe someone that has needed to use this fix will confirm that it works.
gerrykiddy said:
Thank you if I ever need it. Maybe someone that has needed to use this fix will confirm that it works.
Click to expand...
Click to collapse
Well, it doesn't work for me... I held those buttons for 5 minutes, and all my phone did was to reboot about every15 seconds to the "Your device is booting now..."
I also tried with other button combos without any luck.
SnowmanDK said:
Well, it doesn't work for me... I held those buttons for 5 minutes, and all my phone did was to reboot about every15 seconds to the "Your device is booting now..."
I also tried with other button combos without any luck.
Click to expand...
Click to collapse
What happened to your device. Please tell me in detail ?
Arsaam said:
What happened to your device. Please tell me in detail ?
Click to expand...
Click to collapse
I made a post just before you did over here: https://forum.xda-developers.com/hu...i-p9-lite-stuck-bootloop-enter-t3600868/pages
After that post I managed to get into fastboot mode, when connected to my computer using usb, however my frp is locked and fastboot unlocked, so I am stuck there at the moment.
SnowmanDK said:
I made a post just before you did over here: https://forum.xda-developers.com/hu...i-p9-lite-stuck-bootloop-enter-t3600868/pages
After that post I managed to get into fastboot mode, when connected to my computer using usb, however my frp is locked and fastboot unlocked, so I am stuck there at the moment.
Click to expand...
Click to collapse
Download the SRK Tool for huawei p9 lite and unlock bootloader ( if required ). Then flash twrp recovery and then root the device. You might have made a mistake between any one of the processes. Also check if the OEM is unlocked in device developer options
Arsaam said:
Download the SRK Tool for huawei p9 lite and unlock bootloader ( if required ). Then flash twrp recovery and then root the device. You might have made a mistake between any one of the processes. Also check if the OEM is unlocked in device developer options
Click to expand...
Click to collapse
As written in the other thread, the phone boot loops, and I only have access to fastboot. It refuses to go into recovery and can not boot normally.
I can't flash TWRP as frp is locked.
I tried messing around with Miracle Loader 2.27A, but it can't find my phone (maybe I am doing something wrong).
I'm not an English native speaker, so I won't write in perfect English, hope it is understandable.
The questions are in the bottom of the post.
-
So, I recently bought an Huawei P10 Lite. I'm new to the Huawei scene but I modded some Samsung phones some years ago.
When I booted up my Huawei for the first time, I saw the "TIM" (a telephone operator in Italy, I don't know how you call it, but it's similar to T-Mobile, Verizon, Vodafone etc.) bootanimation.
I was afraid that my P10 Lite would be full of bloatwares, but it wasn't.
So, thanks to this, I have 10GB left, 12GB occupied by installed applications and games, and 10GB occupied by the system.
The only problem with the branded version of this smartphone is that I have a custom bootanimation, which is very slow and runs on a very low framerate, and I have to wait extra months when a new patch/version is released.
Also, I can't understand why the system occupies 10GB, it's too much for me.
So, since yesterday, I searched for solutions and found some answers.
The first one is rooting, but I don't like that. I often do some things on rooted devices which lead me to brick them.
Another solution I found is using "Firmware Finder". I opened it and he recognized my phone as a "WAS-LX1AC55B176" (WAS-LX1A / Build 176), which is the actual version installed on my device. So I tried to install the newest version (Build 187 not Full OTA) via Proxy (he failed) and via DNS. Using the DNS method, I waited 10 minutes and got the 300mb downloaded. The only problem is that it asked me to download more and more patches until I reached the Patch 11 with 3,68GB download, then I gave up.
Now I'm considering to try the WAS-LX1AC432B191 (European) version in Full OTA (I'm going to try the 300mb one, too) but I don't know if there are any differences between C55 and C432 (Yes, I know that one is branded and one is not, but I mean differences like Single or Dual SIM etc.).
At the moment, my phone is Single-SIM and it has 4/32GB of RAM/ROM.
-
So here are the problems:
- Do I lose all my data with a OTA update via Firmware Finder DNS?
- Do I brick my device if I do an OTA update via Firmware Finder DNS switching from C55 to C432?
- Does the C432 version work only with Dual-SIM or 3/32GB or 4/64GB devices?
- What C432 build190 do I have to download? There are 3 OTAs (103343, 103344, 103459) and 1 Full OTA (103460).
mister if you want debrand your device from c55 to c432, you need:
all files are in the forum
unlock bootloader(please copy code to safe place, and all data required).
download oeminfo c432 ss or ds and b182(ds) and b183(ss)
twrp
adb drivers(install in c
-----------------------------------------------------
download serviceRom and extract, insert a sdcard on your laptop and create a dload folder. Open the rom downloaded until dload, copy update.app + all was folders.
now with the device, poweroff and conect to laptop:
frp: enable oem unlock(go to about phone), press several times to developer settings, then go to developer settings and scrol until oem unlock and enable(yes or yes).
- fastboot: vol- + power
- cmd(cd c:/adb): fastboot oem unlock your code, press yes and config device
- twrp: fastboot flash recovery recovery.img, finished type fastboot reboot(plus vol +) until you go to huawei erecovery, poweroff and unplug, press vol+ and power.
- in twrp: make a backup only oeminfo(copy yes or yes to safe place) on your sdcard, copy/replace the downloaded oeminfo to twrp backed up folder and press restore. poweroff
- dload: press vol +/- and power untill update starts.
foliaje said:
mister if you want debrand your device from c55 to c432, you need:
all files are in the forum
unlock bootloader(please copy code to safe place, and all data required).
download oeminfo c432 ss or ds and b182(ds) and b183(ss)
twrp
adb drivers(install in c
-----------------------------------------------------
download serviceRom and extract, insert a sdcard on your laptop and create a dload folder. Open the rom downloaded until dload, copy update.app + all was folders.
now with the device, poweroff and conect to laptop:
frp: enable oem unlock(go to about phone), press several times to developer settings, then go to developer settings and scrol until oem unlock and enable(yes or yes).
- fastboot: vol- + power
- cmd(cd c:/adb): fastboot oem unlock your code, press yes and config device
- twrp: fastboot flash recovery recovery.img, finished type fastboot reboot(plus vol +) until you go to huawei erecovery, poweroff and unplug, press vol+ and power.
- in twrp: make a backup only oeminfo(copy yes or yes to safe place) on your sdcard, copy/replace the downloaded oeminfo to twrp backed up folder and press restore. poweroff
- dload: press vol +/- and power untill update starts.
Click to expand...
Click to collapse
Thanks for replying, but I don't want to root my device, guess I have to wait until Oreo comes out. When it does, I'll root my device and take the risk to update it (for me, it's very risky, I'm not that good in rooting "new" devices.
Step by step video to fix your bricked P10 Lite
This video is made to help everyone to successfully fix your Bricked Huawei P10 Lite
Follow the below youtube video link clearly to unbrick your Huawei
https://youtu.be/0vDgDXePAR4
Cheers.....
zYoshi said:
Thanks for replying, but I don't want to root my device, guess I have to wait until Oreo comes out. When it does, I'll root my device and take the risk to update it (for me, it's very risky, I'm not that good in rooting "new" devices.
Click to expand...
Click to collapse
root is unnecesary when you want debrand the device
foliaje said:
root is unnecesary when you want debrand the device
Click to expand...
Click to collapse
But don't I need root to access TWRP and all that type of things?
zYoshi said:
But don't I need root to access TWRP and all that type of things?
Click to expand...
Click to collapse
yoshi with root user you can do things that with a normal user can't, such as uninstall system apps.
with twrp you can back/restore/wipe/flash etc.... obviously debrand or not, util oreo update but you need wait until huawei and your operator decide relase
twrp=huawei no good option ?????
foliaje said:
yoshi with root user you can do things that with a normal user can't, such as uninstall system apps.
with twrp you can back/restore/wipe/flash etc.... obviously debrand or not, util oreo update but you need wait until huawei and your operator decide relase
twrp=huawei no good option
Click to expand...
Click to collapse
You don't understand.
I don't want to loose my warranty only because I can't wait, so I'll root my device when the warranty will expire (so, in 2020).
Please Help me...
I have already tried everything possible.
P8 lite only starts in the fastboot mode.
Error
Func NO : 9 (dsp image)
Error NO : 1 (security verify failed ! )
sorry for my english
Flash stock UPDATE.APP by putting it in the dload folder on the sd card and then holding vol- vol+ and power button to force the update.
Botar230 said:
Flash stock UPDATE.APP by putting it in the dload folder on the sd card and then holding vol- vol+ and power button to force the update.
Click to expand...
Click to collapse
not working.....
i flash system,cust,recovery,userdata,boot in fastboot
fastboot say Ok..
i flash dsp image, fastboot says error
phone starts only in rescue mode with
func no : 9 dsp image
error no : 1 security verify failed
or Fastboot mode
HELP me Please
and sorry for my english
BigH187 said:
not working.....
Click to expand...
Click to collapse
Can you give more details of how it is not working? Like does it even start to prepare update?
keikari said:
Can you give more details of how it is not working? Like does it even start to prepare update?
Click to expand...
Click to collapse
I flash all images with fastboot (many roms) fastboot say OK
cant enter Recovery or eRecovery.
push the power button, phone start in rescue mode.
nothing works ,only rescue mode and fastboot mode.
BigH187 said:
I flash all images with fastboot (many roms) fastboot say OK
cant enter Recovery or eRecovery.
push the power button, phone start in rescue mode.
nothing works ,only rescue mode and fastboot mode.
Click to expand...
Click to collapse
It should still be able to do force update or at least fail to do it. Make sure you have like >70% battery. Put UPDATE.APP in folder named dload in your sd-card and hold 'vol -, vol + and power.'
BigH187 said:
I flash all images with fastboot (many roms) fastboot say OK
cant enter Recovery or eRecovery.
push the power button, phone start in rescue mode.
nothing works ,only rescue mode and fastboot mode.
Click to expand...
Click to collapse
If your phone still boots in rescue mode, then I think the rom you've flashed is not compatible with your phone. As @up said, try to force an update.
Sent from my LG-K220 using XDA Labs
Botar230 said:
If your phone still boots in rescue mode, then I think the rom you've flashed is not compatible with your phone. As @up said, try to force an update.
Sent from my LG-K220 using XDA Labs
Click to expand...
Click to collapse
The only keyboard shortcut that works is v - and power for fastboot mode.
Ok ... and what could be the right rom?
The last Rom that worked was the slimrom Marshmallow for Ale-L21.
I believe singel sim
Thanks for help
BigH187 said:
The only keyboard shortcut that works is v - and power for fastboot mode.
Ok ... and what could be the right rom?
The last Rom that worked was the slimrom Marshmallow for Ale-L21.
I believe singel sim
Thanks for help
Click to expand...
Click to collapse
I came up with the following solution:
1. Flash TWRP (fastboot flash recovery <path>.img)
2. Type fastboot reboot and then unplug the usb cable as fast as you can and hold vol+ to boot into twrp.
3. Wipe -> Swipe to Factory Reset
4. Wipe -> Format Data
5. Download B896_update.zip
6. Advanced -> ADB Sideload -> Swipe to Start Sideload
7. adb sideload <path_to_b896>.zip
8. Once the process is finished, reboot the phone.
keikari said:
It should still be able to do force update or at least fail to do it. Make sure you have like >70% battery. Put UPDATE.APP in folder named dload in your sd-card and hold 'vol -, vol + and power.'
Click to expand...
Click to collapse
Hello, I have the same problem! I'll tell you in detail: the phone starts only in rescue mode ...
Nowhere to go just into the fast boot mode, please help me how to fix it!
(...The-PhoenixX...) said:
Hello, I have the same problem! I'll tell you in detail: The phone is loaded in mode always, after 3 buttons it is launched in the rescue mode, in recovery - the same problem! I ask to help or assist as it to correct!
Click to expand...
Click to collapse
Try this:
Botar230 said:
I came up with the following solution:
1. Flash TWRP (fastboot flash recovery <path>.img)
2. Type fastboot reboot and then unplug the usb cable as fast as you can and hold vol+ to boot into twrp.
3. Wipe -> Swipe to Factory Reset
4. Wipe -> Format Data
5. Download B896_update.zip
6. Advanced -> ADB Sideload -> Swipe to Start Sideload
7. adb sideload <path_to_b896>.zip
8. Once the process is finished, reboot the phone.
Click to expand...
Click to collapse
(...The-PhoenixX...) said:
Hello, I have the same problem! I'll tell you in detail: the phone starts only in rescue mode ...
Nowhere to go just into the fast boot mode, please help me how to fix it!
Click to expand...
Click to collapse
What were you trying to do when problem started. It probably won't do anything at your state, but have you tried to hold vol+ in fastboot mode, normally it should go to eRecovery.(not that you can do anything with it, but would be good to know)
Also try things with usb cable plugged and un-plugged this really makes difference in some cases.
keikari said:
It should still be able to do force update or at least fail to do it. Make sure you have like >70% battery. Put UPDATE.APP in folder named dload in your sd-card and hold 'vol -, vol + and power.'
Click to expand...
Click to collapse
Botar230 said:
Try this:
Click to expand...
Click to collapse
The problem is that in the recovery does not come
---------- Post added at 02:42 PM ---------- Previous post was at 02:38 PM ----------
keikari said:
It should still be able to do force update or at least fail to do it. Make sure you have like >70% battery. Put UPDATE.APP in folder named dload in your sd-card and hold 'vol -, vol + and power.'
Click to expand...
Click to collapse
keikari said:
What were you trying to do when problem started. It probably won't do anything at your state, but have you tried to hold vol+ in fastboot mode, normally it should go to eRecovery.(not that you can do anything with it, but would be good to know)
Also try things with usb cable plugged and un-plugged this really makes difference in some cases.
Click to expand...
Click to collapse
I uninstalled the firmware before the problem happened!
the loader is unlocked
(...The-PhoenixX...) said:
The problem is that in the recovery does not come
Click to expand...
Click to collapse
The recovery does not come? What do you mean?
My solution works only on P8 lite 2015 (that's the op's phone model).
(...The-PhoenixX...) said:
I uninstalled the firmware before the problem happened!
the loader is unlocked
Click to expand...
Click to collapse
How exactly you did it? That should never be necessary or good idea to do.(Unless you are only wiping partitions in recovery.)
Hey ... I've tried everything here and in other forums. No matter what I tried I can only boot the fastboot mode.
What the hell is actually a dsp.img?
BigH187 said:
Hey ... I've tried everything here and in other forums. No matter what I tried I can only boot the fastboot mode.
What the hell is actually a dsp.img?
Click to expand...
Click to collapse
I also have this problem
I got this error trying to change my data to f2fs and install MorfuZ V3.4
spend all afternoon without finding solutions
dload in microsd don't work i try with 4 firmwares
any help please?:crying:
...i try to flash ROM_MORFUZ_3.4_EMUI8_HONOR8LITE_BY_CATUVA21.ZIP
...now Can't recovery, can't fastboot...
Huawei Multi Tool don't runs
Huawei P8 lite ALE L21
EgonsS said:
...i try to flash ROM_MORFUZ_3.4_EMUI8_HONOR8LITE_BY_CATUVA21.ZIP
...now Can't recovery, can't fastboot...
Huawei Multi Tool don't runs
Huawei P8 lite ALE L21
Click to expand...
Click to collapse
The rom you've flashed is not compatible with P8 lite 2015. Unfortunately, you've probably hardbricked your phone - there is no way to fix it.
Hello guys! i have the same problem as this guy here:
HELP! Hardbricked p10 lite after dload update
Apparently I played way too much with my p10 lite and managed to get it bricked very badly... I can't get to any kind of recovery mode, erecovery, update menu for dload, I can only get to fastboot mode, when I try to boot into the rom or into...
forum.xda-developers.com
LET'S BEGIN OUR JOURNEY:
i follow this guide succesfully:
P10 lite bootloader unlock (June 2020, Windows install)
Damn, it's been a while since I was here. Back then it was mostly about Windows PDAs. Disclaimer: Your warranty after this process is void and your phone will tell you it can not be trusted because it's unlocked. This is what worked for me. I...
forum.xda-developers.com
so since i downgraded to emui 5 i wanted to upgrade to emui 8 (for custom roms) but with OTA was not working
then i managed to flashed twrp (3.1.x.x) succesfully cause the new ones were not working
but with this recovery i couldn't flash anything! and i had already wiped everything out! (data, dalvik cache, system, etc...)
i tried to flash new twrp version through twrp, but i didn't worked!
i decided to flash stock firmware (emui 5) with force dload method (phone off, pressing all 3 buttons together, you know...)
https://androidhost.ru/JT (Warsaw-L21 C432B182 EU SERVICE)
with this, GUESS WHAT, i soft bricked it, i couldn't boot BUT dload, erecovery, etc...were working!
so i follow this guide flashing stock firmware (emui 8) with force dload method:
Service Roms -DLOAD for C432,upgrade O-O or N-O, unbrick, locking bootloader, etc
Finally Service roms for Emui 8 provided by Huawei . Only for EU models - C432 Same Service roms could be used for upgrade from Emui 5 to Emui 8, and its a new possibility. But please be careful for upgrading from emui 5 to emui 8 you should be...
forum.xda-developers.com
but i think i just hard bricked my device.
the phone boots in error mode
func NO: 11 (recovery image)
error NO: 2 (load failed!)
i can't use dload, erecovery, or twrp (or stock recovery)
only fastboot works
when i'm trying to flash something in fastboot mode (ex recovery or boot.img) i get the error
FAILED (remote: partition length get error)
DEVICE INFO:
huawei p10 lite (4gb / dual sim)
fastboot oem get-bootinfo
(bootloader) unlocked
fastboot oem get-psid
(bootloader) SN: obscured (if you need it tell me)
(bootloader) IMEI: obscured (if u need it tell me)
(bootloader) IMEI1:000000000000000
(bootloader) MEID:00000000000000
fastboot oem get-build-number
(bootloader) :WAS-LX1AC02B141
fastboot oem get-product-model
(bootloader) WAS-LX1A
fastboot getvar vendorcountry
vendorcountry: vodafone/default (this appears now, cause the first emui 5 firmware i flashed was vodafone branded)
My bootloader and FRP are UNLOCKED
thanks a lot to everybody, if you need any other details just tell me!
Hi...
what about HWOTA-WAS Methode? There you can change Region from C02 to any other. If you didnt have the 3 package Firmware for that. Let me know...i can upload my B398C432 for 4GB dual sim firmware. You can
also try to only extract the oeminfo from same named folder and flash it by fastboot command
fastboot flash oeminfo xxxxxxxxx.img
If its no image then Rename it from xxxxxxxxx to xxxxxxxxx.img
But hey heads up...nothing is lost
solong
speedson
speedson said:
Hi...
what about HWOTA-WAS Methode? There you can change Region from C02 to any other. If you didnt have the 3 package Firmware for that. Let me know...i can upload my B398C432 for 4GB dual sim firmware. You can
also try to only extract the oeminfo from same named folder and flash it by fastboot command
fastboot flash oeminfo xxxxxxxxx.img
If its no image then Rename it from xxxxxxxxx to xxxxxxxxx.img
But hey heads up...nothing is lost
solong
speedson
Click to expand...
Click to collapse
thanks man! yes please, can you upload it? I'll try what you suggest for sure
Mcgreygor said:
thanks man! yes please, can you upload it? I'll try what you suggest for sure
Click to expand...
Click to collapse
OK for sure I will do it even im back at home and infront of my Computer.
solong
speedson
Here these 2 zip´s waiting for your download. Keep in mind...an unlocked bootloader is needet^^
HWOTA - Google Drive
drive.google.com
HWOTA-WAS-Eng is the tool
HWOTA are the 3 parts of the Firmware
unzip the tool ( HWOTA8_WAS is what we want ) and unzip the 3 parts of firmware
copy and paste the 3 parts of firmware into the HWOTA8_WAS / update folder
then connect the Phone ( fastboot mode ) to the PC
start the process by execute the update_eng.bat
when asked whether it should be repacked or already is .... it is already repacked
when asked for Source...choose Script
now the !!!!what would you do!!! choose 2 for !!!!!!change location!!!!! that you go away from the C02 European-Vodafone Brandt straight to the one you want WAS-LX1AC432
follow the prcess to the End
hope it help you by unbrick/restore your Phone...good luck bro
solong
speedson
if this had not work cause of bla blub idont know....we try another Option with Multi-Tool and Huawei-firmware-extractor
thanks man! i tried, but when i have to reboot to twrp recovery, the phone boots in error mode
again:
func no: 11 (recovery image)
error no: 2 (load failed!)
Mcgreygor said:
thanks man! i tried, but when i have to reboot to twrp recovery, the phone boots in error mode
again:
func no: 11 (recovery image)
error no: 2 (load failed!)
Click to expand...
Click to collapse
Hi...
in your first post you write that dload doesnt work for you. So how did you doing it?
Wich firmware package you choose for dload method---have a link?
How did you config the external sd and the dload folder?
solong
speedson
speedson said:
Hi...
in your first post you write that dload doesnt work for you. So how did you doing it?
Wich firmware package you choose for dload method---have a link?
How did you config the external sd and the dload folder?
solong
speedson
Click to expand...
Click to collapse
wait...there is some confusion here i think hahaha
yes! dload method DOESN'T WORK so i tried your method.
i follow the guide and when i use "update_eng.bat" it flashes the twrp recovery and then it asks to reboot to recovery but it doesn't work!
Hello ,
mee too I had this issue so what I did maybe you need to be patient . you will push dload ( the idea is to try every firmware even if not compatible with your phone result just worked your phone )
1 - if I undertand well you are using a wrong recovery.img ( same issue happed with me) I use a lot of and what is compatible for me is twrp_p10_lite_0.4.img - fixed mount issues ( LINK ) you can try all of them if this one does not open twrp well but I guess that will help you .
2 - if you could open the TWRP make a full wip everything . delete all systems data .... everything .
3 - here you need to be patient please : donwload all huawei dual SIM and try one by one download this FIRMWARE
4 - put the file exactly as this HERE @Thanks to Alexxx1
5 - if we suppose after many tries you have the chance to get phone worked and you will see that the BUILD NUMBER is like that 8.0.0.046 (xyz)
6 - connect your phone using HI SUITE then update from HI SUITE . you will see that you are in the last version of EMUI and try another version . click on it . you will see the exact Firmware of your device but android 7 not problem you can get latest update after easily .as always .
try this and I hop that I helped you .
BR
Mcgreygor said:
wait...there is some confusion here i think hahaha
yes! dload method DOESN'T WORK so i tried your method.
i follow the guide and when i use "update_eng.bat" it flashes the twrp recovery and then it asks to reboot to recovery but it doesn't work!
Click to expand...
Click to collapse
Hi...
ok guys.....dont try anything other...keep on being at the HWOTA ok sweethearts. The HWOTA progress is starting and flashing the TWRP recovery...then it ask to reboot to recovery but nothing happens right? The Answer is very simple.
There doesnt exist a fastboot command to directly reboot from fastboot to recovery like
fastboot reboot-recovery (this command would be nice but its not existing)
so what is to do for you after TWRP was flashed successfully...the script is waiting for the boot into recovery. you need to do it manually by unplug the usb cable from the Phone and then press pwr button for so long that the screen turns into black-shut off the phone you know.
even the screen is tunred into black (the phone is shut-off) instantly press and hold Vol-up key for so long until you see the Huawei Logo...Pwr-Key not needet cause Phone is power-up by it selfe.
you should now enter recovery-mode....now reconnect the usb cable and in the HWOTA script press enter and follow the instructions in the blue screen script and dont forget we want to change the Region. That you leave the C02 Vodafone branding firmware to c432 European no branding.
for the latest step the script ask you to relock the bootloader or let him unlocked...so let him unlocked if you not have a unlock-code and if you want to flash a custom rom later.
ennadif said:
Hello ,
mee too I had this issue so what I did maybe you need to be patient . you will push dload ( the idea is to try every firmware even if not compatible with your phone result just worked your phone )
1 - if I undertand well you are using a wrong recovery.img ( same issue happed with me) I use a lot of and what is compatible for me is twrp_p10_lite_0.4.img - fixed mount issues ( LINK ) you can try all of them if this one does not open twrp well but I guess that will help you .
2 - if you could open the TWRP make a full wip everything . delete all systems data .... everything .
3 - here you need to be patient please : donwload all huawei dual SIM and try one by one download this FIRMWARE
4 - put the file exactly as this HERE @Thanks to Alexxx1
5 - if we suppose after many tries you have the chance to get phone worked and you will see that the BUILD NUMBER is like that 8.0.0.046 (xyz)
6 - connect your phone using HI SUITE then update from HI SUITE . you will see that you are in the last version of EMUI and try another version . click on it . you will see the exact Firmware of your device but android 7 not problem you can get latest update after easily .as always .
try this and I hop that I helped you .
BR
Click to expand...
Click to collapse
Hi...
8.0.0.046(xyz) is a bug mode that means it is a wrong boot image in the System with a security patch from 2018 if i remeber correctly. The HiSuit could not help for his Problem cause he had a wrong brandet firmware flashed. btw HiSiute also doesnt help by anything that you try to fix...you Device is not supportet is the standart answer from HiSuite...its a bull**** tool like every other bull**** tool from other Customers like Samsung Sony bla blub.
So let us go the HWOTA way to really fix his issue and to get his Device working like it should I know that will work pretty well.
solong
speedson
speedson said:
Hi...
ok guys.....dont try anything other...keep on being at the HWOTA ok sweethearts. The HWOTA progress is starting and flashing the TWRP recovery...then it ask to reboot to recovery but nothing happens right? The Answer is very simple.
There doesnt exist a fastboot command to directly reboot from fastboot to recovery like
fastboot reboot-recovery (this command would be nice but its not existing)
so what is to do for you after TWRP was flashed successfully...the script is waiting for the boot into recovery. you need to do it manually by unplug the usb cable from the Phone and then press pwr button for so long that the screen turns into black-shut off the phone you know.
even the screen is tunred into black (the phone is shut-off) instantly press and hold Vol-up key for so long until you see the Huawei Logo...Pwr-Key not needet cause Phone is power-up by it selfe.
you should now enter recovery-mode....now reconnect the usb cable and in the HWOTA script press enter and follow the instructions in the blue screen script and dont forget we want to change the Region. That you leave the C02 Vodafone branding firmware to c432 European no branding.
for the latest step the script ask you to relock the bootloader or let him unlocked...so let him unlocked if you not have a unlock-code and if you want to flash a custom rom later.
Hi...
8.0.0.046(xyz) is a bug mode that means it is a wrong boot image in the System with a security patch from 2018 if i remeber correctly. The HiSuit could not help for his Problem cause he had a wrong brandet firmware flashed. btw HiSiute also doesnt help by anything that you try to fix...you Device is not supportet is the standart answer from HiSuite...its a bull**** tool like every other bull**** tool from other Customers like Samsung Sony bla blub.
So let us go the HWOTA way to really fix his issue and to get his Device working like it should I know that will work pretty well.
solong
speedson
Click to expand...
Click to collapse
Hello Speedson ,
Your are the master , am not a develpooer and I have 1 % knowledge on firmware . but Hisuite helped me really . when I had the wrong boot 8.0.0.046 (xyz ) I just go to system update then other version . really Hisuite gived me emui 5 as version with my build number exactly .
anyway your methode could help more . put no one will lose if try this solution as fin,al solution.
BR
thanks guys so much! for helping me, you are so sweet! <3
ennadif said:
Hello ,
mee too I had this issue so what I did maybe you need to be patient . you will push dload ( the idea is to try every firmware even if not compatible with your phone result just worked your phone )
1 - if I undertand well you are using a wrong recovery.img ( same issue happed with me) I use a lot of and what is compatible for me is twrp_p10_lite_0.4.img - fixed mount issues ( LINK ) you can try all of them if this one does not open twrp well but I guess that will help you .
2 - if you could open the TWRP make a full wip everything . delete all systems data .... everything .
3 - here you need to be patient please : donwload all huawei dual SIM and try one by one download this FIRMWARE
4 - put the file exactly as this HERE @Thanks to Alexxx1
5 - if we suppose after many tries you have the chance to get phone worked and you will see that the BUILD NUMBER is like that 8.0.0.046 (xyz)
6 - connect your phone using HI SUITE then update from HI SUITE . you will see that you are in the last version of EMUI and try another version . click on it . you will see the exact Firmware of your device but android 7 not problem you can get latest update after easily .as always .
try this and I hop that I helped you .
BR
Click to expand...
Click to collapse
Thanks Man! but i already tried with that twrp image
it doesn't work...it always say:
fastboot flash recovery twrp_p10_lite_0.4.img
Sending 'recovery' (24954 KB) OKAY [ 0.656s]
Writing 'recovery' FAILED (remote: 'partition length get error')
fastboot: error: Command failed
fastboot flash ramdisk_recovery twrp_p10_lite_0.4.img
Sending 'ramdisk_recovery' (24954 KB) OKAY [ 0.657s]
Writing 'ramdisk_recovery' FAILED (remote: 'partition length get error')
fastboot: error: Command failed
either cases
speedson said:
Hi...
ok guys.....dont try anything other...keep on being at the HWOTA ok sweethearts. The HWOTA progress is starting and flashing the TWRP recovery...then it ask to reboot to recovery but nothing happens right? The Answer is very simple.
There doesnt exist a fastboot command to directly reboot from fastboot to recovery like
fastboot reboot-recovery (this command would be nice but its not existing)
so what is to do for you after TWRP was flashed successfully...the script is waiting for the boot into recovery. you need to do it manually by unplug the usb cable from the Phone and then press pwr button for so long that the screen turns into black-shut off the phone you know.
even the screen is tunred into black (the phone is shut-off) instantly press and hold Vol-up key for so long until you see the Huawei Logo...Pwr-Key not needet cause Phone is power-up by it selfe.
you should now enter recovery-mode....now reconnect the usb cable and in the HWOTA script press enter and follow the instructions in the blue screen script and dont forget we want to change the Region. That you leave the C02 Vodafone branding firmware to c432 European no branding.
for the latest step the script ask you to relock the bootloader or let him unlocked...so let him unlocked if you not have a unlock-code and if you want to flash a custom rom later.
Hi...
8.0.0.046(xyz) is a bug mode that means it is a wrong boot image in the System with a security patch from 2018 if i remeber correctly. The HiSuit could not help for his Problem cause he had a wrong brandet firmware flashed. btw HiSiute also doesnt help by anything that you try to fix...you Device is not supportet is the standart answer from HiSuite...its a bull**** tool like every other bull**** tool from other Customers like Samsung Sony bla blub.
So let us go the HWOTA way to really fix his issue and to get his Device working like it should I know that will work pretty well.
solong
speedson
Click to expand...
Click to collapse
Hey man! thanks again for reply
the command "fastboot reboot recovery" actually exist, and works with many models, but not all of them
with the p10 lite, it works:
fastboot reboot recovery
Rebooting into recovery OKAY [ 0.018s]
Finished. Total time: 0.034s
the problem is, i still get "error mode"
even if i try with the "power on + volume up" combo...still...error mode
@speedson would you like to do a teamviewer session to my computer?
and a telegram videocall to see the phone?
what you think?
i have the same issue. Speedson`s way is working but i cant seem to find a way to charge my phone either on error mode or on fastboot.
Upon restart there is a red lightining and the phone isnt rebooting if i take off any cable. just black screen as if it is not charged. when i connect the cable with pc it wont boot to recovery because its connected.
dimutris said:
i have the same issue. Speedson`s way is working but i cant seem to find a way to charge my phone either on error mode or on fastboot.
Upon restart there is a red lightining and the phone isnt rebooting if i take off any cable. just black screen as if it is not charged. when i connect the cable with pc it wont boot to recovery because its connected.
Click to expand...
Click to collapse
yep, same issue now...i can't offline charge my phone
red blinking and the phone goes OFF
i can only use fastboot mode with usb plugged in
Do you think its possible the issue of not charging to be because of the software or maybe the charging port is somewhat damaged?
I mean it could be possible that we both might have damaged the charging port. However i cant see anywhere some info about that issue. Can we for sure know that the phone charges on error mode or on bootloader, or is itfor sure a software issue?
speedson said:
Here these 2 zip´s waiting for your download. Keep in mind...an unlocked bootloader is needet^^
......
solong
speedson
if this had not work cause of bla blub idont know....we try another Option with Multi-Tool and Huawei-firmware-extractor
Click to expand...
Click to collapse
I have the exact same problem, but my phone is WAS-LX1C432 (p10lite dual sim with 3gb ram). Could you please upload the HWOTA for WAS-LX1C432?
dimutris said:
Do you think its possible the issue of not charging to be because of the software or maybe the charging port is somewhat damaged?
I mean it could be possible that we both might have damaged the charging port. However i cant see anywhere some info about that issue. Can we for sure know that the phone charges on error mode or on bootloader, or is itfor sure a software issue?
Click to expand...
Click to collapse
What's the output you get from this command: fastboot getvar battery-voltage
getvar:battery-voltage FAILED (remote: Command not allowed)