I'm not an English native speaker, so I won't write in perfect English, hope it is understandable.
The questions are in the bottom of the post.
-
So, I recently bought an Huawei P10 Lite. I'm new to the Huawei scene but I modded some Samsung phones some years ago.
When I booted up my Huawei for the first time, I saw the "TIM" (a telephone operator in Italy, I don't know how you call it, but it's similar to T-Mobile, Verizon, Vodafone etc.) bootanimation.
I was afraid that my P10 Lite would be full of bloatwares, but it wasn't.
So, thanks to this, I have 10GB left, 12GB occupied by installed applications and games, and 10GB occupied by the system.
The only problem with the branded version of this smartphone is that I have a custom bootanimation, which is very slow and runs on a very low framerate, and I have to wait extra months when a new patch/version is released.
Also, I can't understand why the system occupies 10GB, it's too much for me.
So, since yesterday, I searched for solutions and found some answers.
The first one is rooting, but I don't like that. I often do some things on rooted devices which lead me to brick them.
Another solution I found is using "Firmware Finder". I opened it and he recognized my phone as a "WAS-LX1AC55B176" (WAS-LX1A / Build 176), which is the actual version installed on my device. So I tried to install the newest version (Build 187 not Full OTA) via Proxy (he failed) and via DNS. Using the DNS method, I waited 10 minutes and got the 300mb downloaded. The only problem is that it asked me to download more and more patches until I reached the Patch 11 with 3,68GB download, then I gave up.
Now I'm considering to try the WAS-LX1AC432B191 (European) version in Full OTA (I'm going to try the 300mb one, too) but I don't know if there are any differences between C55 and C432 (Yes, I know that one is branded and one is not, but I mean differences like Single or Dual SIM etc.).
At the moment, my phone is Single-SIM and it has 4/32GB of RAM/ROM.
-
So here are the problems:
- Do I lose all my data with a OTA update via Firmware Finder DNS?
- Do I brick my device if I do an OTA update via Firmware Finder DNS switching from C55 to C432?
- Does the C432 version work only with Dual-SIM or 3/32GB or 4/64GB devices?
- What C432 build190 do I have to download? There are 3 OTAs (103343, 103344, 103459) and 1 Full OTA (103460).
mister if you want debrand your device from c55 to c432, you need:
all files are in the forum
unlock bootloader(please copy code to safe place, and all data required).
download oeminfo c432 ss or ds and b182(ds) and b183(ss)
twrp
adb drivers(install in c
-----------------------------------------------------
download serviceRom and extract, insert a sdcard on your laptop and create a dload folder. Open the rom downloaded until dload, copy update.app + all was folders.
now with the device, poweroff and conect to laptop:
frp: enable oem unlock(go to about phone), press several times to developer settings, then go to developer settings and scrol until oem unlock and enable(yes or yes).
- fastboot: vol- + power
- cmd(cd c:/adb): fastboot oem unlock your code, press yes and config device
- twrp: fastboot flash recovery recovery.img, finished type fastboot reboot(plus vol +) until you go to huawei erecovery, poweroff and unplug, press vol+ and power.
- in twrp: make a backup only oeminfo(copy yes or yes to safe place) on your sdcard, copy/replace the downloaded oeminfo to twrp backed up folder and press restore. poweroff
- dload: press vol +/- and power untill update starts.
foliaje said:
mister if you want debrand your device from c55 to c432, you need:
all files are in the forum
unlock bootloader(please copy code to safe place, and all data required).
download oeminfo c432 ss or ds and b182(ds) and b183(ss)
twrp
adb drivers(install in c
-----------------------------------------------------
download serviceRom and extract, insert a sdcard on your laptop and create a dload folder. Open the rom downloaded until dload, copy update.app + all was folders.
now with the device, poweroff and conect to laptop:
frp: enable oem unlock(go to about phone), press several times to developer settings, then go to developer settings and scrol until oem unlock and enable(yes or yes).
- fastboot: vol- + power
- cmd(cd c:/adb): fastboot oem unlock your code, press yes and config device
- twrp: fastboot flash recovery recovery.img, finished type fastboot reboot(plus vol +) until you go to huawei erecovery, poweroff and unplug, press vol+ and power.
- in twrp: make a backup only oeminfo(copy yes or yes to safe place) on your sdcard, copy/replace the downloaded oeminfo to twrp backed up folder and press restore. poweroff
- dload: press vol +/- and power untill update starts.
Click to expand...
Click to collapse
Thanks for replying, but I don't want to root my device, guess I have to wait until Oreo comes out. When it does, I'll root my device and take the risk to update it (for me, it's very risky, I'm not that good in rooting "new" devices.
Step by step video to fix your bricked P10 Lite
This video is made to help everyone to successfully fix your Bricked Huawei P10 Lite
Follow the below youtube video link clearly to unbrick your Huawei
https://youtu.be/0vDgDXePAR4
Cheers.....
zYoshi said:
Thanks for replying, but I don't want to root my device, guess I have to wait until Oreo comes out. When it does, I'll root my device and take the risk to update it (for me, it's very risky, I'm not that good in rooting "new" devices.
Click to expand...
Click to collapse
root is unnecesary when you want debrand the device
foliaje said:
root is unnecesary when you want debrand the device
Click to expand...
Click to collapse
But don't I need root to access TWRP and all that type of things?
zYoshi said:
But don't I need root to access TWRP and all that type of things?
Click to expand...
Click to collapse
yoshi with root user you can do things that with a normal user can't, such as uninstall system apps.
with twrp you can back/restore/wipe/flash etc.... obviously debrand or not, util oreo update but you need wait until huawei and your operator decide relase
twrp=huawei no good option ?????
foliaje said:
yoshi with root user you can do things that with a normal user can't, such as uninstall system apps.
with twrp you can back/restore/wipe/flash etc.... obviously debrand or not, util oreo update but you need wait until huawei and your operator decide relase
twrp=huawei no good option
Click to expand...
Click to collapse
You don't understand.
I don't want to loose my warranty only because I can't wait, so I'll root my device when the warranty will expire (so, in 2020).
Related
How to unbrick or get back stock on your Huawei Mate 8. There are many reasons why you would want to do that.
In my case my device (AL10) was stuck at "your device cannot be trusted" after updating from B180 to B321.
First I got to thank acer73 for his software. ajsmsg78 and Kris Chen for their links to the right ROMs.
Also thanks to DarkSilentSC for his help, especially with the L29, great support.
He has a L29, which I don't have, so I'm glad he provides help with that device.
This worked for me on my AL10 to get it back on track, should work on other models too. Just have to find the right ROMSs as according to your model. However, I am not responsible if this does not work for you or if it bricks your phone even more.
And remember: don't forget turning on usb debugging whenever you can!
Unbrick (return to Stock)
1. Find yourself a stock ROM.zip according to your model and extract from the zip the update.app (I used one from a B172 (AL10) Stock ROM, I was running a B180 custom ROM, it worked.)
2. Download the Huawei Update Extractor http://forum.xda-developers.com/showthread.php?t=2433454
3. Extract boot.img, recovery.img, system.img and cust.img with the HuaweiUpateExtractor from the Update.App you find in the ROM to somewhere where you can find them easily
4. Head over to http://forum.xda-developers.com/mate-8/development/rayglobe-italian-knife-t3295526 (You can also do it with fastboot commands, but Acer73's tool makes it easier)
5. get yourself the Italian Knife (btw you probably have to turn off your anti-virus program), extract it in a directory on your PC and start Rayglobe_knife.exe
6. Put the images you have extracted into the folder Unbrick (same directory where you extracted Rayglobe Knife in). The folder was created after you started Rayglobe_Knife.exe
7. Boot your phone into bootloader.
8. In the Rayglobe Knife tool choose Unbrick and choose the option where it says you have placed all the images in the unbrick folder.
9. let the magic work. The phone will restart and it will probably take 15 minutes, make sure its charged enough.
After all that I quickly updated to the latest Stock ROM version, in my case B321, which you need to do if you want to flash later a custom B321. See second post if you want to do that as well or continue with unlocking the bootloader.
Now lets get the bootloader unlocked (for some reason mine was still unlocked)
1. Get Minimal ADB https://www.androidfilehost.com/?fid=24521665358595410
2. Hopefully you still have your unlock code (cause you need it otherwise it won't work)
3. Put your phone in Bootloader Mode (Press & hold power and volume down)
4. Extract Minimal ADB zip and run command.bat
5. Type <fastboot oem unlock xxxxxxxxxxxxx> (where xxxx is your bootloader unlock code)
6. Done
Now lets get twrp set up
1. For that we need minimal ADB again
2. Headover to http://forum.xda-developers.com/mate-8/development/recovery-twrp-huawei-mate-8-t3298567
3. Download TWRP according to your EMUI (For B321 it's EMUI 4.1)
4. Place the image in the directory of the Minimal ADB
5. Rename it to just twrp.img (not necessary but simplifies things)
6. Put your phone in Bootloader Mode (Press & hold power and volume down)
7. Run command.bat
8. Type <fastboot flash recovery twrp.img>
9. Then type fastboot reboot
10. Now you can hold volume up and power until your phone boots into TWRP
11. You need to format data (you'll lose everything on your phone)
12. Done
Remember: don't forget turning on usb debugging whenever you can!
!!!FOR L29 scroll down to DarkSilentSC's instructions!!!
After unbricking I quickly updated my AL10 to the latest version, in this case B321. Should work with all B3xx
1. Head over to Kris Chen's thread (this I used for the AL10)
http://forum.xda-developers.com/mate-8/development/rom-verison-t3324164
Or ajsmsg78's (also AL10 and L09)
http://forum.xda-developers.com/showpost.php?p=66776194&postcount=58 to get the Stock B321
2. Download the ROM and after downloading the zip file, extract update.app from it. Copy the UPDATE.APP to the internal memory of your HM8 in a folder called - dload (you may have to create it). Then press [volume+]+
[volume-]+[power] together to force the update.
3. Voila B321
-----------
!!![For the L29 you should try DarkSilentSC's instructions, which you find below or in post #54 on page 6 http://forum.xda-developers.com/mate-8/general/unbrick-updating-to-b321-t3375934/page6 don't forget to hit thanks!!!
1. Start from stock B170 firmware with TWRP ready
2. Extract BOOT, CUST, RECOVERY, SYSTEM from B321 UPDATE.APP
3. Add firmware .zip file (which contains META-INF folder and UPDATE.APP) and place it into internal storage
4. Make sure internal storage data is fully backed up
5. Delete All Accounts in Settings
6. Go to Recovery, Wipe Cache, Delvik Cache, Data, System
7. Flash that .zip file! (Getting errors is okay at this time) [This is what I didn't do before!]
8. Boot straight to bootloader
9. fastboot flash boot, cust, and system
10. let it boot. Let it proceed with encryption process in chinese and fully boot into EMUI
11. NOW I'M AT EMUI 4.1!
12. Reboot to fastboot and fastboot flash insecure_boot and flash TWRP
13. Reboot to recovery (TWRP) and then flash whatever rom you want to place in!
14. Enjoying it!
Great, was looking for details instructions like that, was stuck at cannot be trusted screen
Hello. Also i stuck today when i try to update. I try at my own all what did you said ......everything greast but when i try to flash rom from update.app proccess no pass more than 5:%.
My phone was also al-10 but 2 months ago i debrand with internation rom of acer. Nothing i cant flash . phone reboot work but can flash i thing my problem is the oem info file. Can anyone please help me
ganjbass said:
Hello. Also i stuck today when i try to update. I try at my own all what did you said ......everything greast but when i try to flash rom from update.app proccess no pass more than 5:%.
My phone was also al-10 but 2 months ago i debrand with internation rom of acer. Nothing i cant flash . phone reboot work but can flash i thing my problem is the oem info file. Can anyone please help me
Click to expand...
Click to collapse
Which update.app did you use? Maybe your download is corrupt?
BTW I debranded mine too with Acer's to international.
GerManiac said:
Which update.app did you use? Maybe your download is corrupt?
BTW I debranded mine too with Acer's to international.
Click to expand...
Click to collapse
NXT-AL10C00B321 i extract i unbrick from acer tool and then i use uppdate.app t but no pass more than 5%
What method you used for deprand? mine after debrand no able to use wifi recovery also no let me update even if i install factory recovery.
ganjbass said:
NXT-AL10C00B321 i extract i unbrick from acer tool and then i use uppdate.app t but no pass more than 5%
Click to expand...
Click to collapse
But you first used different ROM images to unbrick and then tried to update to B321.
really sounds as if your file is corrupted. Would try to download it again
GerManiac said:
But you first used different ROM images to unbrick and then tried to update to B321.
really sounds as if your file is corrupted. Would try to download it again
Click to expand...
Click to collapse
ok i will try tommorow......thanks for help by theway the phone booted but if i flash recovery for root no boot.... very strange....sometimes aloud to flash from boot some times no ohhhhhhh(((
Or something no correct with huawei extractor..... Can you provide extracted files?
Thanks in advance.
So I unbricked with B170 and then tried force flashing B321. My first attempt at flashing B321 ended up getting stuck at 5%. Tried flashing again and it said it was incompatible with the current firmware version of my phone. Any ideas on what I should do next?
Edit: Nevermind. I mistakenly copied the UPDATE.APP from B170 to the dload folder instead of the one from B321. lol
Now on B321. Thanks!
AndroidBestieRE said:
Great, was looking for details instructions like that, was stuck at cannot be trusted screen
Click to expand...
Click to collapse
Used this stock ROM for L29 to unbrick, it worked well following OP instructions
update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v46463/f1/full/update.zip
hi, i have follow unbrick guide with knife, flash from knife and phone reboot. when phone reboot in settings, info phones, serial number is b321. is corretcly??
danielg90 said:
hi, i have follow unbrick guide with knife, flash from knife and phone reboot. when phone reboot in settings, info phones, serial number is b321. is corretcly??
Click to expand...
Click to collapse
Don't know which ROM you used to unbrick.
But seems that you used an B321 if that worked for you and you have no problems then that is great.
Could mean that wet can unbrick straight with the most current ROM available. If someone else could confirm?
GerManiac said:
Don't know which ROM you used to unbrick.
But seems that you used an B321 if that worked for you and you have no problems then that is great.
Could mean that wet can unbrick straight with the most current ROM available. If someone else could confirm?
Click to expand...
Click to collapse
i have AL10, please link stock rom that you used
danielg90 said:
i have AL10, please link stock rom that you used
Click to expand...
Click to collapse
Can't find the link right now, am in the car, but I've found this link to B170
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43738/f1/full/update.zip:
Did not check though if it works
GerManiac said:
Can't find the link right now, am in the car, but I've found this link to B170
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43738/f1/full/update.zip:
Did not check though if it works
Click to expand...
Click to collapse
sorry, is possible flash with knife if bootloader is locked? my bootloader is locked
hello, my phone is still stuck.. i tried other cust/system/recovery/boot from other update.app, but its still stuck at: your device has been unlocked... im on l29
Have NXT-L29, downloaded stock L09 file from posted link, placed UPDATE.APP into 'dload' folder which I created, but still hanging at 5%. What to do?? Exactly where do I create this 'dload' folder? Just at 'Internal Storage'?
danielg90 said:
sorry, is possible flash with knife if bootloader is locked? my bootloader is locked
Click to expand...
Click to collapse
Bootloader has to be unlocked. You can unlock best with DC unlocker, it's fast and only costs around 5 dollars.
Unless you already have your unlock code then you can unlock following instructions see my first post
GerManiac said:
Bootloader has to be unlocked. You can unlock best with DC unlocker, it's fast and only costs around 5 dollars.
Unless you already have your unlock code then you can unlock following instructions see my first post
Click to expand...
Click to collapse
ok how can i unlocked bootloader with b321 stock?
DarkSilentSC said:
Have NXT-L29, downloaded stock L09 file from posted link, placed UPDATE.APP into 'dload' folder which I created, but still hanging at 5%. What to do?? Exactly where do I create this 'dload' folder? Just at 'Internal Storage'?
Click to expand...
Click to collapse
What are you trying to do? Unbrick or update?
The folder has to be created in internal storage
My Honor 6 Plus is asian version I believe...
I upgraded it one week ago. Now I have Android 5.1.1, EMUI 3.1, (EMUI3.1_PE-TL10_6.1.1)
No root, No Bootloader
Ver. CUSTCHNC00D672
I tried following ROM Android 6.0 unsuccessfully!!
PE-TL10_C432B571 EUROPE
PE-TL10_C432B521 EUROPE
PE-TL10_C675B520 INDIA
PE-TL10_C10B520 RUSSIA
PE-TL10_C636B520 ASIA
It is impossible a upgrade to Android 6.0 and ROM Android 6 China version I didn't find...
Any solution for ROM Europe on ROM China?
Any help?
what is your cust version
CXXXBXXX
???
Sent from my H30-U10 using Tapatalk
hamzio7 said:
what is your cust version
CXXXBXXX
???
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
My version now is EMUI 3.1 PE-TL10 6.1.1
CUSTCHNC00D672
ROM "PE_EMUI3.1_Android5.1_6.1.1.zip", that I downloaded right here... I cannot found the thread now
caracal reloaded said:
My version now is EMUI 3.1 PE-TL10 6.1.1
CUSTCHNC00D672
ROM "PE_EMUI3.1_Android5.1_6.1.1.zip", that I downloaded right here... I cannot found the thread now
Click to expand...
Click to collapse
You have to find the correct build for your phone...
It has to end like this C00BXXX
Make sure that the region code most be the same
C00
Sent from my H30-U10 using Tapatalk
Looks like a Dev ROM to me. Your bootloader is unlocked?
My phone has always been stock. No bootloader, root, nothing... My current rom I found here. It seems official..
caracal reloaded said:
My phone has always been stock. No bootloader, root, nothing... My current rom I found here. It seems official..
Click to expand...
Click to collapse
You should unlock your bootloader and flash ROM via fastboot. That will upgrade your phone to 6.0. Would you like directions on how to do that?
goldfinv said:
You should unlock your bootloader and flash ROM via fastboot. That will upgrade your phone to 6.0. Would you like directions on how to do that?
Click to expand...
Click to collapse
Yes... sure!!
If it is the only way to overcome the regional limits.....
I think the phone will then rooted. Only that some banking app not works with rooted phone
caracal reloaded said:
Yes... sure!!
If it is the only way to overcome the regional limits.....
Click to expand...
Click to collapse
Check here to unlock bootloader
http://forum.xda-developers.com/honor-6/development/honor-6-rooting-method-t2962795
Then download Latest Full upgrade package for Honor 6 plus
http://www.hihonor.com/in/support/details/?DOC_ID=91145
Honor 6 drivers can be found here
https://androidmtk.com/download-huawei-usb-drivers
Download Huawei update extractor
http://forum.xda-developers.com/showthread.php?t=2433454
Extract Update.app from downloaded firmware.
Use Huawei update extractor to extract system.img, recovery.img, boot.img, Cust.img
Also, Copy update.app to dload folder on your SD card
Install adb and fastboot
http://forum.xda-developers.com/showthread.php?t=2317790
Power off phone. Hold vol down and connect USB to enter fastboot mode
Use the following command to flash the files on fastboot
Fastboot Flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash Cust Cust.img
Fastboot flash system system.img
When completed, hold power, vol down, vol up till phone starts upgrade process.
Alternatively, use honor multi tool
http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
Use the unbrick option.
Why rom india?
Last Update is not 571 Europe?
I had try with multitool . Mode UNBRICK
cannot write.
For each file (boot, cust, recovery system)
FAILED (remote: Command not allowed)
I can try to install driver, install Hisuite, check on debug mode phone. But nothing
On boot screen "fastboot % rescue mode", I see "Phone Locked"
UPDATE
Impossible to get unlock code
https://emui.huawei.com/en/plugin/unlock/detail
correct data but "Verification Code error" on submit
I have a very strange serial number: "EMUI3.1_PE-TL10_6.1.1" ?!?!?!
I see another SN on Settings> About Phone and then "Status". It should be correct but does something not work (16 decimal numbers(0~9) or capital letters(A~Z)
always correct data but "Verification Code error" on submit
You have to unlock bootloader before you can use fastboot mode to unbrick. The SN in settings - about - phone status is the right one. give it a try again or pm me needed details so I generate the unlock code for you.
ROM for Europe B571
Write you soon. PC crashed
I sent PM
I am stuck
https://emui.huawei.com/en/plugin/unlock/detail
correct data but error message on submit "Verification Code error"
HELP
I've completed this step
Created Folder dload with ROM on phone
unlock bootloader (Honor Multi Tool with SuperSu folder on phone).
Unbrick with ROM for Europe B571 file (done, no problem)
NO TWM or ROOT
(Up to STEP 5)
Phone has rebooted.
Freeze on HONOR LOGO. STOP
I tried with VOL down, VOL up and power to flash ROM, but it fails (!!!)
Installing update stops at 4% : "Software install failed"
Any solution?
Now the phone is always turned on with logo HONOR and if I turn power off it restarts
goldfinv said:
You have to unlock bootloader before you can use fastboot mode to unbrick. The SN in settings - about - phone status is the right one. give it a try again or pm me needed details so I generate the unlock code for you.
ROM for Europe B571
Click to expand...
Click to collapse
For me, this ROM has reported problems. It could be the reason for the failed flash.
I do not think of being able to access the internal memory (with USB) to replace the ROM.
I thought that I can:
1) to performed hardreset (vol+-power, EMUI menu)
2) To put another rom on an external memory
3) Do unbrick again
What you think?
but I check now, Your rom is perfect.
I don't know what to do anymore
http://forum.xda-developers.com/honor-6/general/help-honor-6-unbrick-multi-tools-im-t3498406
Try to find EMUI4.0.1_PE-TL10_7.1.1 it is for your version of Honor 6 Plus PE-TL10. I flashed this version over PE_EMUI3.1_Android5.1_6.1.1. (PE-TL10 EMUI 3.1 Android 5.1) and works fine.
Guys I'm really lost trying to upgrade to Android 6 or even 7.
I know I must upgrade to at least EMUI 4.0
I know I am rooted.
I'm unsure if I have unlocked my boot loader.
How do I easily change Country Codes? Do I even need to do it?
I think if someone can assist with these early steps, then I can proceed alone to install new ROMs etc.
C636 is for South East / South Asian regions...
To check whether you've unlocked your bootloader or not, just boot into the fastboot mode... To do that, shut down your device completely then connect your device to your laptop / PC holding the volume down button. Once you enter into fastboot mode, there a Message will be displayed under the Android Logo. You can confirm whether your bootloader is locked or not.
If your only goal is to get Marshmallow, then you can search for firmware and then manually upgrade using the dload method.
First, you download the required firmware (gradually up to Marshmallow), then you extract the update.zip to get UPDATE.APP file (usually 2.3GB+). Then you copy the UPDATE.APP file into a folder named dload. You must then copy this dload folder to the root of Internal Memory and you can update your Android through Updater.
Here's the link to Marshmallow C636B540
amageek said:
C636 is for South East / South Asian regions...
To check whether you've unlocked your bootloader or not, just boot into the fastboot mode... To do that, shut down your device completely then connect your device to your laptop / PC holding the volume down button. Once you enter into fastboot mode, there a Message will be displayed under the Android Logo. You can confirm whether your bootloader is locked or not.
If your only goal is to get Marshmallow, then you can search for firmware and then manually upgrade using the dload method.
First, you download the required firmware (gradually up to Marshmallow), then you extract the update.zip to get UPDATE.APP file (usually 2.3GB+). Then you copy the UPDATE.APP file into a folder named dload. You must then copy this dload folder to the root of Internal Memory and you can update your Android through Updater.
Here's the link to Marshmallow C636B540
Click to expand...
Click to collapse
Okay, yes all that is cool. Further info I have now managed to instal TWRP 2.8.7. So I will try to now install c636B540.
aussie_boi said:
Okay, yes all that is cool. Further info I have now managed to instal TWRP 2.8.7. So I will try to now install c636B540.
Click to expand...
Click to collapse
try installing TWRP v. 3.1.1... That's the latest TWRP and compatible with Marshmallow...
Hi,
I flashed xenonHD ROM by HassanMirza week ago.
Today i heard the android 8 comes to huawei p10 lite.
I'd like to back to stock rom
I tried dload method, fastboot mode (flashes, but not booting)
I don't know how to do it
pls help
https://forum.xda-developers.com/p10-lite/development/compilation-firmware-flash-emui-8-0-0-t3777658
Jaizu said:
https://forum.xda-developers.com/p10-lite/development/compilation-firmware-flash-emui-8-0-0-t3777658
Click to expand...
Click to collapse
Thanks a lot
HYPER98889 said:
Hi,
I flashed xenonHD ROM by HassanMirza week ago.
Today i heard the android 8 comes to huawei p10 lite.
I'd like to back to stock rom
I tried dload method, fastboot mode (flashes, but not booting)
I don't know how to do it
pls help
Click to expand...
Click to collapse
after few tries it's not working
twrp flashes it but i cant boot to system (bootanimation is mising, after few seconds it restarts the phone and showing erecovery)
HYPER98889 said:
Hi,
I flashed xenonHD ROM by HassanMirza week ago.
Today i heard the android 8 comes to huawei p10 lite.
I'd like to back to stock rom
I tried dload method, fastboot mode (flashes, but not booting)
I don't know how to do it
pls help
Click to expand...
Click to collapse
- Download with Huawei Firmware Finder right files your phone (common base -> filelist, copy link internet browser (download all). You can put your own model in setting)
(example europe version WAS-LX1C432 , i think 2 sim hw L21 and 1 sim hw L01, before this i was WAS-LX1C432B206 )
http://pro-teammt.ru/projects/hwff/GetLatestVersion.action
- Extract files with HuaweiUpdateExtractor
http://forum.xda-developers.com/attachment.php?attachmentid=3262545
Need extract for multi-tool 8: BOOT.img, CUST.img, RECOVERY.img, RECOVERY2.img, SYSTEM.img, UPDATE.APP).
(because i not really remeber , try all other files from update.app from *hw*.zip and update.app from update.zip
Please fix is not right, is is possible both are same)
- Multi-Tool 8 -> unbrick
http://pro-teammt.ru/projects/hwmt/release/Multi-Tool 8.msi
Turn phone off from TWRP (reboot, shutdown)
press vol - and put usb cable in pc (need go download mode, repeat if need, if pc not reconize put phone normat booting with usb and go coffee)
try twice if need with swipe cache.
Maybe it end error message but running right.
- If all seems be fine, relock bootloader
Turn off phone
press vol - and put usb cable in pc (need go download mode, repeat if need)
(Run in bat file or type in command window , your own bootloader opening code from huawei.)
fastboot oem relock "your opening code"
Good luck, i repair no system files with this.
I was first timer, so try understand poor instructions.
HWOTA, Sideload, Dload not working with me.
Mikelsson70 said:
- Download with Huawei Firmware Finder right files your phone (common base -> filelist, copy link internet browser (download all). You can put your own model in setting)
(example europe version WAS-LX1C432 , i think 2 sim hw L21 and 1 sim hw L01, before this i was WAS-LX1C432B206 )
http://pro-teammt.ru/projects/hwff/GetLatestVersion.action
- Extract files with HuaweiUpdateExtractor
http://forum.xda-developers.com/attachment.php?attachmentid=3262545
Need extract for multi-tool 8: BOOT.img, CUST.img, RECOVERY.img, RECOVERY2.img, SYSTEM.img, UPDATE.APP).
(because i not really remeber , try all other files from update.app from *hw*.zip and update.app from update.zip
Please fix is not right, is is possible both are same)
- Multi-Tool 8 -> unbrick
http://pro-teammt.ru/projects/hwmt/release/Multi-Tool 8.msi
Turn phone off from TWRP (reboot, shutdown)
press vol - and put usb cable in pc (need go download mode, repeat if need, if pc not reconize put phone normat booting with usb and go coffee)
try twice if need with swipe cache.
Maybe it end error message but running right.
- If all seems be fine, relock bootloader
Turn off phone
press vol - and put usb cable in pc (need go download mode, repeat if need)
(Run in bat file or type in command window , your own bootloader opening code from huawei.)
fastboot oem relock "your opening code"
Good luck, i repair no system files with this.
I was first timer, so try understand poor instructions.
HWOTA, Sideload, Dload not working with me.
Click to expand...
Click to collapse
I cant find the userdata.img and the ramdisk_recovery
You you have the stock e-recovery (nougat)?
If yes try to "update" to the firmware service repair (emui 5): http://androidhost.ru/JS
Or try to update to stock oreo (you can see my EMUI 8 post)
Hello everyone.
I managed to brick my p9 lite (VNS-L31C432 dual sim) by flashing the rollback package over B161 (I know B160 is for DS, I just missed the correct update.app twice). The current status of my phone right now is:
- Phone won't boot, is stuck at "Phone is booting now"
- VolUP + VolDOWN + Power combination doesn't access to dload. If I have it connected via usb to my computer it kinda enter to dload but an usb plug symbol appears and does nothing
- Can unblock/rebock bootloader
- Can access to TWRP 3.0.2-0
- Can access to Fastboot and flash partitions, however when I do it TWRP lose the ability to mount them and they appear as 0MB partitions (I have to change fs to EXT2 then to EXT4 to make them work again).
So, from where should I start to try to recover my phone?
Mairtrus said:
Hello everyone.
I managed to brick my p9 lite (VNS-L31C432 dual sim) by flashing the rollback package over B161 (I know B160 is for DS, I just missed the correct update.app twice). The current status of my phone right now is:
- Phone won't boot, is stuck at "Phone is booting now"
- VolUP + VolDOWN + Power combination doesn't access to dload. If I have it connected via usb to my computer it kinda enter to dload but an usb plug symbol appears and does nothing
- Can unblock/rebock bootloader
- Can access to TWRP 3.0.2-0
- Can access to Fastboot and flash partitions, however when I do it TWRP lose the ability to mount them and they appear as 0MB partitions (I have to change fs to EXT2 then to EXT4 to make them work again).
So, from where should I start to try to recover my phone?
Click to expand...
Click to collapse
Hello,
unlock again the bootloader then use correct rollback package (or flash L31C432OEMinfo_bin dual sim file with TWRP) and DLOAD correct firmware this time...
If you are unsure just ask...
Cheers
Dadditz said:
Hello,
unlock again the bootloader then use correct rollback package (or flash L31C432OEMinfo_bin dual sim file with TWRP) and DLOAD correct firmware this time...
If you are unsure just ask...
Cheers
Click to expand...
Click to collapse
Thanks, pal, but I already fixed it, doing a lot of trial-errors
If someone who had the same problems I had is reading this, what you really need to do is:
As Dadditz said, flash first your correct oem info, then unlock the bootloader
If you can't access dload, find the full-ota package for the exact same version of MM you previously had (before the brick, of course). Unzip the UPDATE.APP and then use UpdateExtractor to get BOOT, SYSTEM, RECOVERY, RECOVERY2 and CUST. Flash all of them via Fastboot.
If you try to boot and it gets into eRecovery, then it's a good sign. Put the UPDATE.APP from the previous step in the dload folder of your SD, use the dload method and let the install run. It will probably fail at the end, this seems to be normal.
You phone will boot and it will probably feel like it's working ok again, but I bet there are chances that a some stuff doesn't work or even appear at all (first time the fingerprint config didn't appeared to me, second time was the google account login). Turn off the phone, install the correct version of TWRP, wipe cache/dalvik, then do a factory reset (dunno if both are needed, I just did it this way and it worked ok).
Reboot you phone. Now it should really be working ok again.
If you little P9-Lite refuses to update to a newer version, use Firmware Finder to upgrade whatever version FullOTA-MF-PV you want to (in my case, I did to B370).
Enjoy
I'm still wondering why installing the wrong rollback package messes up with the recovery2 partition...
Mairtrus said:
Thanks, pal, but I already fixed it, doing a lot of trial-errors
If someone who had the same problems I had is reading this, what you really need to do is:
As Dadditz said, flash first your correct oem info, then unlock the bootloader
If you can't access dload, find the full-ota package for the exact same version of MM you previously had (before the brick, of course). Unzip the UPDATE.APP and then use UpdateExtractor to get BOOT, SYSTEM, RECOVERY, RECOVERY2 and CUST. Flash all of them via Fastboot.
If you try to boot and it gets into eRecovery, then it's a good sign. Put the UPDATE.APP from the previous step in the dload folder of your SD, use the dload method and let the install run. It will probably fail at the end, this seems to be normal.
You phone will boot and it will probably feel like it's working ok again, but I bet there are chances that a some stuff doesn't work or even appear at all (first time the fingerprint config didn't appeared to me, second time was the google account login). Turn off the phone, install the correct version of TWRP, wipe cache/dalvik, then do a factory reset (dunno if both are needed, I just did it this way and it worked ok).
Reboot you phone. Now it should really be working ok again.
If you little P9-Lite refuses to update to a newer version, use Firmware Finder to upgrade whatever version FullOTA-MF-PV you want to (in my case, I did to B370).
Enjoy
I'm still wondering why installing the wrong rollback package messes up with the recovery2 partition...
Click to expand...
Click to collapse
Yep, factory reset + wipe cache did the work..
Cheers