P10 Lite Hardbrick (can't dload, erecovery, flash recovery,etc...) - Huawei P10 Lite Questions & Answers

Hello guys! i have the same problem as this guy here:
HELP! Hardbricked p10 lite after dload update
Apparently I played way too much with my p10 lite and managed to get it bricked very badly... I can't get to any kind of recovery mode, erecovery, update menu for dload, I can only get to fastboot mode, when I try to boot into the rom or into...
forum.xda-developers.com
LET'S BEGIN OUR JOURNEY:
i follow this guide succesfully:
P10 lite bootloader unlock (June 2020, Windows install)
Damn, it's been a while since I was here. Back then it was mostly about Windows PDAs. Disclaimer: Your warranty after this process is void and your phone will tell you it can not be trusted because it's unlocked. This is what worked for me. I...
forum.xda-developers.com
so since i downgraded to emui 5 i wanted to upgrade to emui 8 (for custom roms) but with OTA was not working
then i managed to flashed twrp (3.1.x.x) succesfully cause the new ones were not working
but with this recovery i couldn't flash anything! and i had already wiped everything out! (data, dalvik cache, system, etc...)
i tried to flash new twrp version through twrp, but i didn't worked!
i decided to flash stock firmware (emui 5) with force dload method (phone off, pressing all 3 buttons together, you know...)
https://androidhost.ru/JT (Warsaw-L21 C432B182 EU SERVICE)
with this, GUESS WHAT, i soft bricked it, i couldn't boot BUT dload, erecovery, etc...were working!
so i follow this guide flashing stock firmware (emui 8) with force dload method:
Service Roms -DLOAD for C432,upgrade O-O or N-O, unbrick, locking bootloader, etc
Finally Service roms for Emui 8 provided by Huawei . Only for EU models - C432 Same Service roms could be used for upgrade from Emui 5 to Emui 8, and its a new possibility. But please be careful for upgrading from emui 5 to emui 8 you should be...
forum.xda-developers.com
but i think i just hard bricked my device.
the phone boots in error mode
func NO: 11 (recovery image)
error NO: 2 (load failed!)
i can't use dload, erecovery, or twrp (or stock recovery)
only fastboot works
when i'm trying to flash something in fastboot mode (ex recovery or boot.img) i get the error
FAILED (remote: partition length get error)​
DEVICE INFO:
huawei p10 lite (4gb / dual sim)
fastboot oem get-bootinfo
(bootloader) unlocked
fastboot oem get-psid
(bootloader) SN: obscured (if you need it tell me)
(bootloader) IMEI: obscured (if u need it tell me)
(bootloader) IMEI1:000000000000000
(bootloader) MEID:00000000000000
fastboot oem get-build-number
(bootloader) :WAS-LX1AC02B141
fastboot oem get-product-model
(bootloader) WAS-LX1A
fastboot getvar vendorcountry
vendorcountry: vodafone/default (this appears now, cause the first emui 5 firmware i flashed was vodafone branded)
My bootloader and FRP are UNLOCKED
thanks a lot to everybody, if you need any other details just tell me!

Hi...
what about HWOTA-WAS Methode? There you can change Region from C02 to any other. If you didnt have the 3 package Firmware for that. Let me know...i can upload my B398C432 for 4GB dual sim firmware. You can
also try to only extract the oeminfo from same named folder and flash it by fastboot command
fastboot flash oeminfo xxxxxxxxx.img
If its no image then Rename it from xxxxxxxxx to xxxxxxxxx.img
But hey heads up...nothing is lost
solong
speedson

speedson said:
Hi...
what about HWOTA-WAS Methode? There you can change Region from C02 to any other. If you didnt have the 3 package Firmware for that. Let me know...i can upload my B398C432 for 4GB dual sim firmware. You can
also try to only extract the oeminfo from same named folder and flash it by fastboot command
fastboot flash oeminfo xxxxxxxxx.img
If its no image then Rename it from xxxxxxxxx to xxxxxxxxx.img
But hey heads up...nothing is lost
solong
speedson
Click to expand...
Click to collapse
thanks man! yes please, can you upload it? I'll try what you suggest for sure

Mcgreygor said:
thanks man! yes please, can you upload it? I'll try what you suggest for sure
Click to expand...
Click to collapse
OK for sure I will do it even im back at home and infront of my Computer.
solong
speedson

Here these 2 zip´s waiting for your download. Keep in mind...an unlocked bootloader is needet^^
HWOTA - Google Drive
drive.google.com
HWOTA-WAS-Eng is the tool
HWOTA are the 3 parts of the Firmware
unzip the tool ( HWOTA8_WAS is what we want ) and unzip the 3 parts of firmware
copy and paste the 3 parts of firmware into the HWOTA8_WAS / update folder
then connect the Phone ( fastboot mode ) to the PC
start the process by execute the update_eng.bat
when asked whether it should be repacked or already is .... it is already repacked
when asked for Source...choose Script
now the !!!!what would you do!!! choose 2 for !!!!!!change location!!!!! that you go away from the C02 European-Vodafone Brandt straight to the one you want WAS-LX1AC432
follow the prcess to the End
hope it help you by unbrick/restore your Phone...good luck bro
solong
speedson
if this had not work cause of bla blub idont know....we try another Option with Multi-Tool and Huawei-firmware-extractor

thanks man! i tried, but when i have to reboot to twrp recovery, the phone boots in error mode
again:
func no: 11 (recovery image)
error no: 2 (load failed!)

Mcgreygor said:
thanks man! i tried, but when i have to reboot to twrp recovery, the phone boots in error mode
again:
func no: 11 (recovery image)
error no: 2 (load failed!)
Click to expand...
Click to collapse
Hi...
in your first post you write that dload doesnt work for you. So how did you doing it?
Wich firmware package you choose for dload method---have a link?
How did you config the external sd and the dload folder?
solong
speedson

speedson said:
Hi...
in your first post you write that dload doesnt work for you. So how did you doing it?
Wich firmware package you choose for dload method---have a link?
How did you config the external sd and the dload folder?
solong
speedson
Click to expand...
Click to collapse
wait...there is some confusion here i think hahaha
yes! dload method DOESN'T WORK so i tried your method.
i follow the guide and when i use "update_eng.bat" it flashes the twrp recovery and then it asks to reboot to recovery but it doesn't work!

Hello ,
mee too I had this issue so what I did maybe you need to be patient . you will push dload ( the idea is to try every firmware even if not compatible with your phone result just worked your phone )
1 - if I undertand well you are using a wrong recovery.img ( same issue happed with me) I use a lot of and what is compatible for me is twrp_p10_lite_0.4.img - fixed mount issues ( LINK ) you can try all of them if this one does not open twrp well but I guess that will help you .
2 - if you could open the TWRP make a full wip everything . delete all systems data .... everything .
3 - here you need to be patient please : donwload all huawei dual SIM and try one by one download this FIRMWARE
4 - put the file exactly as this HERE @Thanks to Alexxx1
5 - if we suppose after many tries you have the chance to get phone worked and you will see that the BUILD NUMBER is like that 8.0.0.046 (xyz)
6 - connect your phone using HI SUITE then update from HI SUITE . you will see that you are in the last version of EMUI and try another version . click on it . you will see the exact Firmware of your device but android 7 not problem you can get latest update after easily .as always .
try this and I hop that I helped you .
BR

Mcgreygor said:
wait...there is some confusion here i think hahaha
yes! dload method DOESN'T WORK so i tried your method.
i follow the guide and when i use "update_eng.bat" it flashes the twrp recovery and then it asks to reboot to recovery but it doesn't work!
Click to expand...
Click to collapse
Hi...
ok guys.....dont try anything other...keep on being at the HWOTA ok sweethearts. The HWOTA progress is starting and flashing the TWRP recovery...then it ask to reboot to recovery but nothing happens right? The Answer is very simple.
There doesnt exist a fastboot command to directly reboot from fastboot to recovery like
fastboot reboot-recovery (this command would be nice but its not existing)
so what is to do for you after TWRP was flashed successfully...the script is waiting for the boot into recovery. you need to do it manually by unplug the usb cable from the Phone and then press pwr button for so long that the screen turns into black-shut off the phone you know.
even the screen is tunred into black (the phone is shut-off) instantly press and hold Vol-up key for so long until you see the Huawei Logo...Pwr-Key not needet cause Phone is power-up by it selfe.
you should now enter recovery-mode....now reconnect the usb cable and in the HWOTA script press enter and follow the instructions in the blue screen script and dont forget we want to change the Region. That you leave the C02 Vodafone branding firmware to c432 European no branding.
for the latest step the script ask you to relock the bootloader or let him unlocked...so let him unlocked if you not have a unlock-code and if you want to flash a custom rom later.
ennadif said:
Hello ,
mee too I had this issue so what I did maybe you need to be patient . you will push dload ( the idea is to try every firmware even if not compatible with your phone result just worked your phone )
1 - if I undertand well you are using a wrong recovery.img ( same issue happed with me) I use a lot of and what is compatible for me is twrp_p10_lite_0.4.img - fixed mount issues ( LINK ) you can try all of them if this one does not open twrp well but I guess that will help you .
2 - if you could open the TWRP make a full wip everything . delete all systems data .... everything .
3 - here you need to be patient please : donwload all huawei dual SIM and try one by one download this FIRMWARE
4 - put the file exactly as this HERE @Thanks to Alexxx1
5 - if we suppose after many tries you have the chance to get phone worked and you will see that the BUILD NUMBER is like that 8.0.0.046 (xyz)
6 - connect your phone using HI SUITE then update from HI SUITE . you will see that you are in the last version of EMUI and try another version . click on it . you will see the exact Firmware of your device but android 7 not problem you can get latest update after easily .as always .
try this and I hop that I helped you .
BR
Click to expand...
Click to collapse
Hi...
8.0.0.046(xyz) is a bug mode that means it is a wrong boot image in the System with a security patch from 2018 if i remeber correctly. The HiSuit could not help for his Problem cause he had a wrong brandet firmware flashed. btw HiSiute also doesnt help by anything that you try to fix...you Device is not supportet is the standart answer from HiSuite...its a bull**** tool like every other bull**** tool from other Customers like Samsung Sony bla blub.
So let us go the HWOTA way to really fix his issue and to get his Device working like it should I know that will work pretty well.
solong
speedson

speedson said:
Hi...
ok guys.....dont try anything other...keep on being at the HWOTA ok sweethearts. The HWOTA progress is starting and flashing the TWRP recovery...then it ask to reboot to recovery but nothing happens right? The Answer is very simple.
There doesnt exist a fastboot command to directly reboot from fastboot to recovery like
fastboot reboot-recovery (this command would be nice but its not existing)
so what is to do for you after TWRP was flashed successfully...the script is waiting for the boot into recovery. you need to do it manually by unplug the usb cable from the Phone and then press pwr button for so long that the screen turns into black-shut off the phone you know.
even the screen is tunred into black (the phone is shut-off) instantly press and hold Vol-up key for so long until you see the Huawei Logo...Pwr-Key not needet cause Phone is power-up by it selfe.
you should now enter recovery-mode....now reconnect the usb cable and in the HWOTA script press enter and follow the instructions in the blue screen script and dont forget we want to change the Region. That you leave the C02 Vodafone branding firmware to c432 European no branding.
for the latest step the script ask you to relock the bootloader or let him unlocked...so let him unlocked if you not have a unlock-code and if you want to flash a custom rom later.
Hi...
8.0.0.046(xyz) is a bug mode that means it is a wrong boot image in the System with a security patch from 2018 if i remeber correctly. The HiSuit could not help for his Problem cause he had a wrong brandet firmware flashed. btw HiSiute also doesnt help by anything that you try to fix...you Device is not supportet is the standart answer from HiSuite...its a bull**** tool like every other bull**** tool from other Customers like Samsung Sony bla blub.
So let us go the HWOTA way to really fix his issue and to get his Device working like it should I know that will work pretty well.
solong
speedson
Click to expand...
Click to collapse
Hello Speedson ,
Your are the master , am not a develpooer and I have 1 % knowledge on firmware . but Hisuite helped me really . when I had the wrong boot 8.0.0.046 (xyz ) I just go to system update then other version . really Hisuite gived me emui 5 as version with my build number exactly .
anyway your methode could help more . put no one will lose if try this solution as fin,al solution.
BR

thanks guys so much! for helping me, you are so sweet! <3

ennadif said:
Hello ,
mee too I had this issue so what I did maybe you need to be patient . you will push dload ( the idea is to try every firmware even if not compatible with your phone result just worked your phone )
1 - if I undertand well you are using a wrong recovery.img ( same issue happed with me) I use a lot of and what is compatible for me is twrp_p10_lite_0.4.img - fixed mount issues ( LINK ) you can try all of them if this one does not open twrp well but I guess that will help you .
2 - if you could open the TWRP make a full wip everything . delete all systems data .... everything .
3 - here you need to be patient please : donwload all huawei dual SIM and try one by one download this FIRMWARE
4 - put the file exactly as this HERE @Thanks to Alexxx1
5 - if we suppose after many tries you have the chance to get phone worked and you will see that the BUILD NUMBER is like that 8.0.0.046 (xyz)
6 - connect your phone using HI SUITE then update from HI SUITE . you will see that you are in the last version of EMUI and try another version . click on it . you will see the exact Firmware of your device but android 7 not problem you can get latest update after easily .as always .
try this and I hop that I helped you .
BR
Click to expand...
Click to collapse
Thanks Man! but i already tried with that twrp image
it doesn't work...it always say:
fastboot flash recovery twrp_p10_lite_0.4.img
Sending 'recovery' (24954 KB) OKAY [ 0.656s]
Writing 'recovery' FAILED (remote: 'partition length get error')
fastboot: error: Command failed
fastboot flash ramdisk_recovery twrp_p10_lite_0.4.img
Sending 'ramdisk_recovery' (24954 KB) OKAY [ 0.657s]
Writing 'ramdisk_recovery' FAILED (remote: 'partition length get error')
fastboot: error: Command failed
either cases

speedson said:
Hi...
ok guys.....dont try anything other...keep on being at the HWOTA ok sweethearts. The HWOTA progress is starting and flashing the TWRP recovery...then it ask to reboot to recovery but nothing happens right? The Answer is very simple.
There doesnt exist a fastboot command to directly reboot from fastboot to recovery like
fastboot reboot-recovery (this command would be nice but its not existing)
so what is to do for you after TWRP was flashed successfully...the script is waiting for the boot into recovery. you need to do it manually by unplug the usb cable from the Phone and then press pwr button for so long that the screen turns into black-shut off the phone you know.
even the screen is tunred into black (the phone is shut-off) instantly press and hold Vol-up key for so long until you see the Huawei Logo...Pwr-Key not needet cause Phone is power-up by it selfe.
you should now enter recovery-mode....now reconnect the usb cable and in the HWOTA script press enter and follow the instructions in the blue screen script and dont forget we want to change the Region. That you leave the C02 Vodafone branding firmware to c432 European no branding.
for the latest step the script ask you to relock the bootloader or let him unlocked...so let him unlocked if you not have a unlock-code and if you want to flash a custom rom later.
Hi...
8.0.0.046(xyz) is a bug mode that means it is a wrong boot image in the System with a security patch from 2018 if i remeber correctly. The HiSuit could not help for his Problem cause he had a wrong brandet firmware flashed. btw HiSiute also doesnt help by anything that you try to fix...you Device is not supportet is the standart answer from HiSuite...its a bull**** tool like every other bull**** tool from other Customers like Samsung Sony bla blub.
So let us go the HWOTA way to really fix his issue and to get his Device working like it should I know that will work pretty well.
solong
speedson
Click to expand...
Click to collapse
Hey man! thanks again for reply
the command "fastboot reboot recovery" actually exist, and works with many models, but not all of them
with the p10 lite, it works:
fastboot reboot recovery
Rebooting into recovery OKAY [ 0.018s]
Finished. Total time: 0.034s
the problem is, i still get "error mode"
even if i try with the "power on + volume up" combo...still...error mode

@speedson would you like to do a teamviewer session to my computer?
and a telegram videocall to see the phone?
what you think?

i have the same issue. Speedson`s way is working but i cant seem to find a way to charge my phone either on error mode or on fastboot.
Upon restart there is a red lightining and the phone isnt rebooting if i take off any cable. just black screen as if it is not charged. when i connect the cable with pc it wont boot to recovery because its connected.

dimutris said:
i have the same issue. Speedson`s way is working but i cant seem to find a way to charge my phone either on error mode or on fastboot.
Upon restart there is a red lightining and the phone isnt rebooting if i take off any cable. just black screen as if it is not charged. when i connect the cable with pc it wont boot to recovery because its connected.
Click to expand...
Click to collapse
yep, same issue now...i can't offline charge my phone
red blinking and the phone goes OFF
i can only use fastboot mode with usb plugged in

Do you think its possible the issue of not charging to be because of the software or maybe the charging port is somewhat damaged?
I mean it could be possible that we both might have damaged the charging port. However i cant see anywhere some info about that issue. Can we for sure know that the phone charges on error mode or on bootloader, or is itfor sure a software issue?

speedson said:
Here these 2 zip´s waiting for your download. Keep in mind...an unlocked bootloader is needet^^
......
solong
speedson
if this had not work cause of bla blub idont know....we try another Option with Multi-Tool and Huawei-firmware-extractor
Click to expand...
Click to collapse
I have the exact same problem, but my phone is WAS-LX1C432 (p10lite dual sim with 3gb ram). Could you please upload the HWOTA for WAS-LX1C432?
dimutris said:
Do you think its possible the issue of not charging to be because of the software or maybe the charging port is somewhat damaged?
I mean it could be possible that we both might have damaged the charging port. However i cant see anywhere some info about that issue. Can we for sure know that the phone charges on error mode or on bootloader, or is itfor sure a software issue?
Click to expand...
Click to collapse
What's the output you get from this command: fastboot getvar battery-voltage

getvar:battery-voltage FAILED (remote: Command not allowed)

Related

P9-lite bricked. Please help!!

SOLVED!
Hi all i just bricked my phone : P9-lite VNS-L31
I managed to unlock bootloader, install twrp and get root permission. Phone worked great. Then i tried to flash xposed and the operation fails due to not enough memory space (!! i have 6gb) and get stuck in bootloop. I made all the possible things i knowed. Tried to use xposed-unistaller.zip (getting other errors like: "no such file o direcory") , wipe cache,dalvik and data and i try also to reflash stock recovery, and to relock bootloader (i can't do that.. why? i get FAILED <remote: command not allowed>) because erecovery and HiSuite can't restore my phone. What can i do?? It's a simple bootloop but i cant restore it. Please help me i have just bought the phone and now i'm very desperate.
I really hope some can help,
Thank you
Can you flash the stock rom through SD card?
Copy the stock rom file to this path: sd card\dload\UPDATE.APP,
Then, presss Volume + , Volume -, and the power keys to force upgrade your phone.
Hi, i solved my problem flashing system.img extracted by an official firmware. Everything ok. If someone need it i can write a little guide now to restore bricked p9-lite with custom recovery and unlocked bootloader (the normal procedure does not work)
Zeph1990 said:
Hi, i solved my problem flashing system.img extracted by an official firmware. Everything ok. If someone need it i can write a little guide now to restore bricked p9-lite with custom recovery and unlocked bootloader (the normal procedure does not work)
Click to expand...
Click to collapse
would you be so kind pls , and could you do the guide for me ? i somehow managed to ruin my phone , i can enter recovery , i can enter erecovery (wont download anything)
but what ever i tried didnt work :/ im getting kinda tilted , cus im trying to solve it for like 7hrs .. and im starting to be alot upset about it .. its like first time i cant repair it my self .. it hurts man (
so thanks for any help
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Zeph1990 said:
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Click to expand...
Click to collapse
with pressing volume - and power i enter into erecovery from there i should use fastboot to flash system.img ? sorry for being dum
edit: when in erecovery (volume- and power) typing fastboot flash system with full path , does nothing .. only saying waiting for device
edit2: no matter what i do , i cant fastboot flash system .. waiting for device .. only thing i can do is enter TWRP (also got root) , enter Erecovery and thats it .. phone only boots to huawei animation along wiht sound and thats it .. i tried adb sideload from TWRP but no help also .. guess there is nothing i can do right ?
Edit3: so i booted via TWRP to bootloader , used that fastboot command , flashed system , wiped cache , and now it is looking that phone is booting up !
thanks bro , any way i can pay you back ? cus you da MVP here !
EDIT4: well phone booted , rebooted , and now i cant enter recovery it boots into erecovery and i cant do nothing else
EDIT5: got into fastboot menu in phone , it says update system again , Error Func NO : 10 (boot image) Error NO : 2 (load failed)
EDIT6: somehow made it into fastboot , somehow flashed recovery , managed to restore my phone from back up , but sadly enough i cant restore it via google , since when i try to log in it says waiting .. dam this phone . i had galaxy S .. got this huawei just for pokemon go (which is pretty ****ty without gyro) FML right
EDIT7: lost most of my hairs .. some of them were ripped out in some anger explosions .. chewed of some of my nails .. but somehow i made it ! now if i only could unroot and relock bootloader xD think im gonna take a break for now and when my nerves will calm down i may try it again . Rly wanna thank you from all of my heart for help , thanks !! your the best man , thanks again
Sorry, can you normally boot and use your phone now?
Edit: It seems you can boot. Now you have restored your twrp recovery. I don't know why you have problems with google log in, but hey now it boots!
Zeph1990 said:
Sorry, can you normally boot and use your phone now?
Edit: It seems you can boot. Now you have restored your twrp recovery. I don't know why you have problems with google log in, but hey now it boots!
Click to expand...
Click to collapse
i cant thank you enough , without you i couldnt achieve this so thanks again !!
finaly did everything .. and only thing left is get bootloader locked and unroot it hope i will somehow find the way
So happy to hear it! =)
I tried also to relock bootloader during my attempts to unbrick the phone but i fail.. i don't know why, but i think someone was able to do it.
Zeph1990 said:
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Hope this can help.
Click to expand...
Click to collapse
Where did you launch the command? I can't do it in the huawei update extractor... Please help!!
Thank you.
ElPinguShow said:
Where did you launch the command? I can't do it in the huawei update extractor... Please help!!
Thank you.
Click to expand...
Click to collapse
Hi, if you don't know what is fastboot maybe you can approach it the easy way.
Download and install this for the correct drivers : http://consumer.huawei.com/minisite/HiSuite_en/index.html
Download and extract to a folder this : https://mega.nz/#!B4tATA5D!-TseQ9A-TPEQhzNQRXsT_cV2i4T7qYYLadceW0fM8k0
Put your phone in fastboot mode : Turn it off. Connect it to your pc . Long press vol - and power until it boots in fastboot mode (white screen with a green android and other stuff). If you want you can boot in fastboot from TWRP recovery : restart -> bootloader.
Copy your extracted SYSTEM.IMG in the root path of the tool (we can assume its name is system.img).
Now launch the tool and press 000 and enter.
If you have done all right now you can give this : fastboot flash system system.img
Wait about 3 minutes. Perform a cache and dalvik cache wipe. Boot your phone.
Zeph1990 said:
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Click to expand...
Click to collapse
Hi,
I am using the standard P9, and getting the Boot Loop also.
I attempted your instructions, and appeared to work - I got the first EMUI initialization screen - and now its gone back to how it was.
Any suggestions?
I think it should work on every phone assuming you are using the right firmware. Do you use the right firmware for the huawei P9 ?? (needless to say it's not the version i posted)).
So if you flashed the right firmware (and i'm pretty sure of this) my advice is to perform a full wipe : Cache, dalvik and data.
If you are still facing the same error consider flashing other frimware parts like boot.img ecc.
I believe so - I am pretty clueless with this stuff.
By firmware, do you mean the stock version? Because I used P9-EVAL09-EVA-B136. Don't suppose you would know the right firmware I require?
I think it's the right version. I am a p9lite user so i don't know specifically the right version of the firmware but i think it's ok. Do you tried a full wipe?
Zeph1990 said:
I think it's the right version. I am a p9lite user so i don't know specifically the right version of the firmware but i think it's ok. Do you tried a full wipe?
Click to expand...
Click to collapse
How can I perform a full wipe? Thanks for replying by the way
So, do you have unlocked bootloader and custom recovery (TWRP) ?
Zeph1990 said:
So, do you have unlocked bootloader and custom recovery (TWRP) ?
Click to expand...
Click to collapse
I do yes
So, go in twrp recovery (turn off phone, long press vol up and power for at least 3 seconds). When you are in you will see 'WIPE' press it then do the swipe to Factory Reset. You will lost your installed apps and the relative settings but you will not lost your personal stuff such photo,music documents ecc. Let me know if you perform it and if it works =)
It appears that TWRP no longer appears. I get thr EMUI options to wipe data/factory reset. But once I do this I just get a red exclamation mark.
Does the phone need to be plugged in via USB?

Honor 6+ PE-TL10 Impossible to upgrade to Android 6 - Tried everything

My Honor 6 Plus is asian version I believe...
I upgraded it one week ago. Now I have Android 5.1.1, EMUI 3.1, (EMUI3.1_PE-TL10_6.1.1)
No root, No Bootloader
Ver. CUSTCHNC00D672
I tried following ROM Android 6.0 unsuccessfully!!
PE-TL10_C432B571 EUROPE
PE-TL10_C432B521 EUROPE
PE-TL10_C675B520 INDIA
PE-TL10_C10B520 RUSSIA
PE-TL10_C636B520 ASIA
It is impossible a upgrade to Android 6.0 and ROM Android 6 China version I didn't find...
Any solution for ROM Europe on ROM China?
Any help?
what is your cust version
CXXXBXXX
???
Sent from my H30-U10 using Tapatalk
hamzio7 said:
what is your cust version
CXXXBXXX
???
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
My version now is EMUI 3.1 PE-TL10 6.1.1
CUSTCHNC00D672
ROM "PE_EMUI3.1_Android5.1_6.1.1.zip", that I downloaded right here... I cannot found the thread now
caracal reloaded said:
My version now is EMUI 3.1 PE-TL10 6.1.1
CUSTCHNC00D672
ROM "PE_EMUI3.1_Android5.1_6.1.1.zip", that I downloaded right here... I cannot found the thread now
Click to expand...
Click to collapse
You have to find the correct build for your phone...
It has to end like this C00BXXX
Make sure that the region code most be the same
C00
Sent from my H30-U10 using Tapatalk
Looks like a Dev ROM to me. Your bootloader is unlocked?
My phone has always been stock. No bootloader, root, nothing... My current rom I found here. It seems official..
caracal reloaded said:
My phone has always been stock. No bootloader, root, nothing... My current rom I found here. It seems official..
Click to expand...
Click to collapse
You should unlock your bootloader and flash ROM via fastboot. That will upgrade your phone to 6.0. Would you like directions on how to do that?
goldfinv said:
You should unlock your bootloader and flash ROM via fastboot. That will upgrade your phone to 6.0. Would you like directions on how to do that?
Click to expand...
Click to collapse
Yes... sure!!
If it is the only way to overcome the regional limits.....
I think the phone will then rooted. Only that some banking app not works with rooted phone
caracal reloaded said:
Yes... sure!!
If it is the only way to overcome the regional limits.....
Click to expand...
Click to collapse
Check here to unlock bootloader
http://forum.xda-developers.com/honor-6/development/honor-6-rooting-method-t2962795
Then download Latest Full upgrade package for Honor 6 plus
http://www.hihonor.com/in/support/details/?DOC_ID=91145
Honor 6 drivers can be found here
https://androidmtk.com/download-huawei-usb-drivers
Download Huawei update extractor
http://forum.xda-developers.com/showthread.php?t=2433454
Extract Update.app from downloaded firmware.
Use Huawei update extractor to extract system.img, recovery.img, boot.img, Cust.img
Also, Copy update.app to dload folder on your SD card
Install adb and fastboot
http://forum.xda-developers.com/showthread.php?t=2317790
Power off phone. Hold vol down and connect USB to enter fastboot mode
Use the following command to flash the files on fastboot
Fastboot Flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash Cust Cust.img
Fastboot flash system system.img
When completed, hold power, vol down, vol up till phone starts upgrade process.
Alternatively, use honor multi tool
http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
Use the unbrick option.
Why rom india?
Last Update is not 571 Europe?
I had try with multitool . Mode UNBRICK
cannot write.
For each file (boot, cust, recovery system)
FAILED (remote: Command not allowed)
I can try to install driver, install Hisuite, check on debug mode phone. But nothing
On boot screen "fastboot % rescue mode", I see "Phone Locked"
UPDATE
Impossible to get unlock code
https://emui.huawei.com/en/plugin/unlock/detail
correct data but "Verification Code error" on submit
I have a very strange serial number: "EMUI3.1_PE-TL10_6.1.1" ?!?!?!
I see another SN on Settings> About Phone and then "Status". It should be correct but does something not work (16 decimal numbers(0~9) or capital letters(A~Z)
always correct data but "Verification Code error" on submit
You have to unlock bootloader before you can use fastboot mode to unbrick. The SN in settings - about - phone status is the right one. give it a try again or pm me needed details so I generate the unlock code for you.
ROM for Europe B571
Write you soon. PC crashed
I sent PM
I am stuck
https://emui.huawei.com/en/plugin/unlock/detail
correct data but error message on submit "Verification Code error"
HELP
I've completed this step
Created Folder dload with ROM on phone
unlock bootloader (Honor Multi Tool with SuperSu folder on phone).
Unbrick with ROM for Europe B571 file (done, no problem)
NO TWM or ROOT
(Up to STEP 5)
Phone has rebooted.
Freeze on HONOR LOGO. STOP
I tried with VOL down, VOL up and power to flash ROM, but it fails (!!!)
Installing update stops at 4% : "Software install failed"
Any solution?
Now the phone is always turned on with logo HONOR and if I turn power off it restarts
goldfinv said:
You have to unlock bootloader before you can use fastboot mode to unbrick. The SN in settings - about - phone status is the right one. give it a try again or pm me needed details so I generate the unlock code for you.
ROM for Europe B571
Click to expand...
Click to collapse
For me, this ROM has reported problems. It could be the reason for the failed flash.
I do not think of being able to access the internal memory (with USB) to replace the ROM.
I thought that I can:
1) to performed hardreset (vol+-power, EMUI menu)
2) To put another rom on an external memory
3) Do unbrick again
What you think?
but I check now, Your rom is perfect.
I don't know what to do anymore
http://forum.xda-developers.com/honor-6/general/help-honor-6-unbrick-multi-tools-im-t3498406
Try to find EMUI4.0.1_PE-TL10_7.1.1 it is for your version of Honor 6 Plus PE-TL10. I flashed this version over PE_EMUI3.1_Android5.1_6.1.1. (PE-TL10 EMUI 3.1 Android 5.1) and works fine.

Another Dead l31 , help needed ...

so i accidentally wiper my os using TWRP
now my device has no os or recovery
i can boot to FASTBOOT but whenever i try to use the comand FASTBOOT FLASH etc it says "remote: command not allowed "
the hardware is ok i guess because i can boot to the erecovery but also failed to download the software there , the dload update.app method didn't work "because my phone doesn't have a recovery installed section in "
so what to do ? how to get my system on again am using windows 10 64 bit !
also what box i can use to flash my OS ?
notes:
1- No OS at all
2- Unlocked bootloader
3- FRO locked "idk what is this "
4- Phone boots only to fastboot
5- No recovery at all
so i really do need your help guys am in a blackout down here :/​
maybe bootloader got locked... try to unlock it again
FlaimeR said:
so i accidentally wiper my os using TWRP
now my device has no os or recovery
i can boot to FASTBOOT but whenever i try to use the comand FASTBOOT FLASH etc it says "remote: command not allowed "
the hardware is ok i guess because i can boot to the erecovery but also failed to download the software there , the dload update.app method didn't work "because my phone doesn't have a recovery installed section in "
so what to do ? how to get my system on again am using windows 10 64 bit !
also what box i can use to flash my OS ?
notes:
1- No OS at all
2- Unlocked bootloader
3- FRO locked "idk what is this "
4- Phone boots only to fastboot
5- No recovery at all
so i really do need your help guys am in a blackout down here :/​
Click to expand...
Click to collapse
first thing, make sure you indeed unlocked your bootloader
If fastboot flash commands fail with command not allowed, there is a big chance that the dload/update.app method fails after 5% as well which means you are trying to flash wrong image (e.g. trying to install L31 onto L21 hardware or vice versa), so make sure you download correct firmware for your hardware and try the dload/update.app method.
Try that : http://forum.xda-developers.com/hua...-downgrade-nougat-to-mm-t3515029#post69987605
i solved it by flashing in a nearby shop , thanks for ur help everyone ^_^
thread closing needed !

P9 Lite Bricked. Help me!!!

Hello,
I was always a Samsung fanboy, but than I decided to buy the P9 lite (VNS-L21 single sim)
I wanted to flash the android 7 update for my phone, but I was such a noob in Huawei, that I didn't understand a word. But i tried to do what the instructions said. Now my phone is bricked. I can go to recovery, erecovery (which can't download anyithing) and download mode. I heard of this fastboot stuff as well, but I don't know how to do this. I tried to flash as many roms as I could with dload and it didn't work, after 5%, it said it failed... Now I don't know what to do. I think somebody (expert) should make a clear tutorial for noobs. Oh and I almost forgot that i don't have root, custom recovery, and things like that. I just bought the phone, I didn't want to make big changes, just new android. Is it possible that after this Huawei would fix my phone, if I couldn't? Or warranty is void? And sadly I don't know more of my phone because I'm not ina rom, and the phone and papers don't say more.
If you could help me, I would appreciate it:
Raul
Turn off your phone, connect to the pc while holding the volume down button, you will end up in fastboot mode.
I assume you have ADB and drivers installed (if not, install ADB and device drivers).
Optional: unlock your bootloader if it's locked.
Download the latest offical rom zip for your phone version (the marshmallow one), extract the update.app.
Use Huawei extractor to ectract the following files (google is your friend in this one, but its not difficult):
boot.img
recovery.img
cust.img
system.img
After you've done this, connect your phone to the PC in fastboot mode .
Open a command promt from the folder where the extracted files are (shift+right click, Open Command window here), enter the following commands
fastboot devices (you will see the list of attached devices with a lot of random number + fastboot)
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
fastboot reboot
After all this, you should be good to go, just be sure you are using the correct rom for you version.
Or you can just serach on the forum and find this.
https://forum.xda-developers.com/huawei-p9lite/help/unbricking-vns-l21-vns-l31-tutorial-t3583400
(Sorry for my english.)
Fastboot says that it has failed command not alllowed, after I want to installl the files. And I couldn't unlock bootloader without phones information...
rr999999 said:
I would happily unlock my bootloader, but I don't know anyithing about my phone (except model...) without the os...
Click to expand...
Click to collapse
Post here IMEI and SN from the box of phone and i can try get your bootloader unlock code...
If I would unlock it, would fastboot work? Because fastboot pc app recognizes my phone, but my phone says in fastboot mode, that I should connect itself to pc and open hisuite. WTF?
rr999999 said:
If I would unlock it, would fastboot work? Because fastboot pc app recognizes my phone, but my phone says in fastboot mode, that I should connect itself to pc and open hisuite. WTF?
Click to expand...
Click to collapse
Until you have bootloader unlock you can not run any fastboot flash command...
rr999999 said:
If I would unlock it, would fastboot work? Because fastboot pc app recognizes my phone, but my phone says in fastboot mode, that I should connect itself to pc and open hisuite. WTF?
Click to expand...
Click to collapse
Heyho,
normally yes, after bootloader unlock u are able to flash via fastboot. But...
I tried to flash as many roms as I could with dload and it didn't work, after 5%, it said it failed...
Click to expand...
Click to collapse
What is the error? - Have u disconnected the device from the PC during the update?
If not, try to update again and just disconnect the device from any USB connection...
Regards,
Sebastian
k1ll3r8e said:
Heyho,
normally yes, after bootloader unlock u are able to flash via fastboot. But...
What is the error? - Have u disconnected the device from the PC during the update?
If not, try to update again and just disconnect the device from any USB connection...
Regards,
Sebastian
Click to expand...
Click to collapse
Hello. I disconnected it from everything (for example USB)When I tried to install it said something like incompatibility version, but it couldn't be because I tried many roms for my phone. And I tried some dual sim roms as well because, I thought that it might work... But then I will do that unlock if it will do good. Thanks for the help Without bootloader I can't flash from dload as well?
rr999999 said:
Hello. I disconnected it from everything (for example USB)When I tried to install it said something like incompatibility version, but it couldn't be because I tried many roms for my phone. And I tried some dual sim roms as well because, I thought that it might work... But then I will do that unlock if it will do good. Thanks for the help Without bootloader I can't flash from dload as well?
Click to expand...
Click to collapse
Heyho,
the dload method works always without unlock bootloader. But, u can't flash for example an B161 over an B3xx (what nougat is) if the update u installed modified already the oeminfo u are not able to flash any rom below B3xx (nougat) via dload.
-
In that case u might use the official rollback package (never tested it myself) or, u unlock ur bootloader, flash a TWRP recovery matching to ur current FW. Flash from there a oeminfo + custom.bin (lower than B3xx) and flash the FW matching to the new oeminfo via dload and stock recovery.
Regards,
Sebastian
If you have custom recovery, wipe everything. Data, system, boot. extract update app (which is your stock rom) with huawei update extractor. go to custom recovery, flash stock boot IMG and stock recovery IMG. Power off, use three button dload method, reboot, when booting press vol up for three second, now you are in e-recovery. Press shutdown. Press and hold power and vol up for stock recovery. Do factory reset. If need do the factory reset 2/3 times. Now you are with locked bootloader.
Sent from my NEM-L21 using Tapatalk[/QUOTE]
Sent from my NEM-L21 using Tapatalk

p9 lite locked in fastboot mode "Your device is booting now..."

Good evening, my device (huawei p9 lite vns l31) with PHONE Unlocked and FRP Unlock got stuck in fastboot and the firmware does not start nor goes into recovery .. the pc with adb sees the phone in fastboot mode .. how can I solve? Thanks!
domenico.velardo said:
Good evening, my device (huawei p9 lite vns l31) with PHONE Unlocked and FRP Unlock got stuck in fastboot and the firmware does not start nor goes into recovery .. the pc with adb sees the phone in fastboot mode .. how can I solve? Thanks!
Click to expand...
Click to collapse
Hello dude,
sorry if i wrote this but you posted in a wrong place.
You should have posted in questions&answers main thread,
as you can see this is guides, news and discussion thread.
Ask some moderator to move it to the correct thread ..
You could, perhaps, add some information on how the device ended up in this condition ..
What firmware was the last working?
Do you have a twrp recovery? if yes which version?
I tried to install twrp but I messed around. i tried several firmware but they didn't boot. I can't get into recovery, it just goes into fastboot
domenico.velardo said:
I tried to install twrp but I messed around. i tried several firmware but they didn't boot. I can't get into recovery, it just goes into fastboot
Click to expand...
Click to collapse
Ok Domenico,
fastboot commands should be sufficient to restore the device,
but you should say which was the last stock / custom working firmware,
(ex. VNS-L31C432B380 or ex. LineageOS 14.1) or at least the android version.... 6 / 7.
Cheers
Dadditz said:
Ok Domenico,
fastboot commands should be sufficient to restore the device,
but you should say which was the last stock / custom working firmware,
(ex. VNS-L31C432B380 or ex. LineageOS 14.1) or at least the android version.... 6 / 7.
Cheers
Click to expand...
Click to collapse
I remember VNS-L31C432B130 Android 7.0 Stock
domenico.velardo said:
I remember VNS-L31C432B130 Android 7.0 Stock
Click to expand...
Click to collapse
Domenico, this is not possible.
B130 is a basic version of android 6.
Android 7 starts from B3xx and above...
Is your device single or dual sim ?
I can provide you a firmware, but it's a bit dangerous
to use without right knowledge of actual firmware version.
Make a little effort and try to remember ..
Dadditz said:
Domenico, this is not possible.
B130 is a basic version of android 6.
Android 7 starts from B3xx and above...
Is your device single or dual sim ?
I can provide you a firmware, but it's a bit dangerous
to use without right knowledge of actual firmware version.
Make a little effort and try to remember ..
Click to expand...
Click to collapse
I have find a file in my notebook: SERVICE FULL REPAIR VNS-L31 C432B389
It could be?
My device is single sim and android 7.0 update
domenico.velardo said:
I have find a file in my notebook: SERVICE FULL REPAIR VNS-L31 C432B389
It could be?
My device is single sim and android 7.0 update
Click to expand...
Click to collapse
Hi Dom,
yes it could be, then try to download and install
twrp 3.1.1-1 by HassanMirza via fastboot commands...
fastboot flash recovery (nameofrecovery).img
Reply me when you done and keep your bootloader code handy...
Dadditz said:
Hi Dom,
yes it could be, then try to download and install
twrp 3.1.1-1 by HassanMirza via fastboot commands...
fastboot flash recovery (nameofrecovery).img
Reply me when you done and keep your bootloader code handy...
Click to expand...
Click to collapse
C:\adb\platform-tools>adb fastboot devices
adb.exe: unknown command fastboot
C:\adb\platform-tools>fastboot devices
4TE0216A22001682 fastboot
C:\adb\platform-tools>fastboot flash recovery Elite_TWRP_3.1.1.img
Sending 'recovery' (24436 KB) OKAY [ 0.768s]
Writing 'recovery' OKAY [ 0.619s]
Finished. Total time: 1.427s
Recovery correctly installed!
I have a bootloader code
domenico.velardo said:
C:\adb\platform-tools>adb fastboot devices
adb.exe: unknown command fastboot
C:\adb\platform-tools>fastboot devices
4TE0216A22001682 fastboot
C:\adb\platform-tools>fastboot flash recovery Elite_TWRP_3.1.1.img
Sending 'recovery' (24436 KB) OKAY [ 0.768s]
Writing 'recovery' OKAY [ 0.619s]
Finished. Total time: 1.427s
Recovery correctly installed!
I have a bootloader code
Click to expand...
Click to collapse
Ok Domenico, good news then...
Now between a few minutes i will provide you some links to download files
and a link with a guide to flash the firmware...
Dadditz said:
Ok Domenico, good news then...
Now between a few minutes i will provide you some links to download files
and a link with a guide to flash the firmware...
Click to expand...
Click to collapse
Thanks my friend!
Dadditz said:
Ok Domenico, good news then...
Now between a few minutes i will provide you some links to download files
and a link with a guide to flash the firmware...
Click to expand...
Click to collapse
As you told me you probably had the B389 firmware,
so i will provide you that one...
From your PC download those three files..
1 - update.zip
2 - update_data_full_public.zip
3 - update_full_VNS-L11_hw_eu.zip
Rename file 2 from update_data_full_public TO update_data_public.
Rename file 3 from update_full_VNS-L11_hw_eu TO update_all_hw.
Let file 1 the same name.
Download THIS SCRIPT (HuRUpdater0.4zip file).
Create a folder and rename it VNSL31C432B389.
Copy all 4 file you downloaded into the folder you created (VNSL31C432B389)
If you want keep TWRP (now recommended),
copy the .img file of the recovery into that folder, otherwise proceed with instruction...
Copy your VNSL31C432B389 folder into the SD card of the phone..
Reboot into the twrp, hit install, find out your folder (VNSL31C432B389),
choose only HuRUpdater0.4.zip file and let it flash.
You may have to follow some instructions on screen if needed, flashing could take many minutes, keep calm...
When rebooting, device could go in a bootloop !!!
If after 20 minutes it hadn't booted, press vol+ and power till it reboot into recovery.
Make a factory reset and everything should be good. Good luck...
I would recommend to read at least a couple of times before do... take your time...

Categories

Resources