Hi guys,
So i got my x style to stock firmware by downloading the firmware from firmware.centre. File name is "CLARK_RETASIA_DS_6.0_MPHS24.49-18-8_cid7_subsidy-DEFAULT_CFC".
My phone successfully booted and then an update to dec 2016 patch was ready. I updated the phone and then it went blank after installing the update. I cant see anything on my phone, its just plain blank.
I tried rebooting into bootloader but it wouldnt work. Tried other forums but nothing helped. need help desparately . When connected to windows it shows "Qualcomm HS-USB QDLoader 9008" Any help would be appreciated.
got the needed help from a friend. Forum MODS can close this thread or delete it.
How did you solve that? What is the correct firmware for Indian moto x style dual Sim?
Related
Hello N9002 Users,
I was trying to work on changing my aboot.mbn file with one that someone modified to remove the china unicom logo, while doing that, I apparently bricked my phone. It currently has the following symtoms:
- No light while charging
- Won't Boot
-Tried following this XDA thread for the N9005 to no avail:
http://forum.xda-developers.com/showthread.php?t=2720203
I was wondering if someone could make a debrick.img of their n9002 and I can try that? It was last running on version 4.4.2; firmware N9002ZNUFNI4.
Instructions on how to create image is here:
http://forum.xda-developers.com/showthread.php?t=2625332
I plug it into Windows and it shows up as QHSUSB_BULK and after installing the qualcomm drivers, shows up as Qualcomm HS-USB QDLoader 9008.
I'm not sure what else to do. If can somebody assist or know how to fix it? it may help others also.
thanks
Monkichi57 said:
Hello N9002 Users,
I was trying to work on changing my aboot.mbn file with one that someone modified to remove the china unicom logo, while doing that, I apparently bricked my phone. It currently has the following symtoms:
- No light while charging
- Won't Boot
-Tried following this XDA thread for the N9005 to no avail:
http://forum.xda-developers.com/showthread.php?t=2720203
I was wondering if someone could make a debrick.img of their n9002 and I can try that? It was last running on version 4.4.2; firmware N9002ZNUFNI4.
Instructions on how to create image is here:
http://forum.xda-developers.com/showthread.php?t=2625332
I plug it into Windows and it shows up as QHSUSB_BULK and after installing the qualcomm drivers, shows up as Qualcomm HS-USB QDLoader 9008.
I'm not sure what else to do. If can somebody assist or know how to fix it? it may help others also.
thanks
Click to expand...
Click to collapse
I have that same problem. Please help me.
my phone's model n900p
From 2014.
You are trying to change boot image ??
HI
Moto X Xt1575 Bricked and stuck in qualcomm drivers
how to solve ?
be more specific to get help real quick...
You are in Qualcomm HS-USB QDLoader mode? Your toast... There is no recovery from that, Moto does not give out the necessary files to recovery from that and none have ever leaked out.
Sorry bro...
acejavelin said:
You are in Qualcomm HS-USB QDLoader mode? Your toast... There is no recovery from that, Moto does not give out the necessary files to recovery from that and none have ever leaked out.
Sorry bro...
Click to expand...
Click to collapse
dammmm... jtag files might help but its only available with Motorola... u gotta hurry up to service center
Maybe some already know me for so much help that he asks for MXPE but really that there is no longer to do, my phone just barely start with custom rom's with the officers always throw me prevail flash error bootloader and it does not start, at Start with customs has no signal with my operator and also the IMEI is changed. I do not know whether to give it for lost or to continue trying to have someone understand and able to give me the help that I really need. I would be most grateful if you could help me.
P.D: and try to flash fastboot the last official rom of the page and still nothing. Continues with the same prevalid flash error bootloader.
My regards.
I flashed RR's Nougot 7.1.1 Custom ROM on my Moto X Style XT1572, everything working fine but Tethering is not visible in Wireless and Networks
My Pure took the OTA, then after logging into google and installing all my apps, the unit was draining the battery so I plugged in the Charger and continued on, then 30 minutes later my XT1575 shut down, not it doesn't want to fire up. What can I do??
Hey guys, I recently had an accident while trying to install stock firmware on my device. I tried to manually install a stock firmware ROM and in the middle of it the device just shut of. What I'm left with is a device which doesn't have fastboot or any other method of recovery other then through some qualcomm tools. The driver shows up as "qualcomm hs-usb qdloader 9008" on my computer. I tried following this guide https://www.droidsavvy.com/unbrick-qualcomm-mobiles/ and concluded that I'm stuck on the old hard brick and tried to follow the instructions but the problem here is that I don't think that I have the correct ROM file for QFIL because the firmware are zip files and not mbn as I think they are supposed to be. If anyone could help me with this in any way I'd really appreciate it, Thank you!
same as you man did you find a solution?
jesusloortega said:
same as you man did you find a solution?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mo...766-unbrick-easy-sdcard-t3833408/post77427426
hello ,
I had installed rescurssion remix rom on my phone and i had decided to change to stock rom. So I give my mobile to a mobile shop and they repaired and changed to stock rom.!!!!actually the problem is......after the repair of my mobile in the mobile shop when I switch power on it directly go to boot loader instead of showing boot logo..After that when it shows the update I updated . It suddenly HARD BRICKED.Only the white light near fingerprint sensor worked while charging. please help meee...:crying::crying::crying::crying:
please help me to make my mobile in good condition ........by solving the boot loader issue which shows as the start up...
If I've read your post correctly, you used an OTA update and that's when you had the white light blinking? When you connect your device to your computer, what is your device recognised as? Is it recognised as Qualcomm HS-USB 9008 or similar?
If so, you may wish to look at this guide to try to get your device fixed: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
Do you know what the shop did for the repair, what stock ROM did they flash to your device?
echo92 said:
If I've read your post correctly, you used an OTA update and that's when you had the white light blinking? When you connect your device to your computer, what is your device recognised as? Is it recognised as Qualcomm HS-USB 9008 or similar?
If so, you may wish to look at this guide to try to get your device fixed: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
Do you know what the shop did for the repair, what stock ROM did they flash to your device?
Click to expand...
Click to collapse
yes it recognize as Qualcomm HS-USB 9008 something like that
the shop has installed rom with build number NPJS25.93-14-18.....I think its april 2018 update
charuvilapauljohn said:
yes it recognize as Qualcomm HS-USB 9008 something like that
the shop has installed rom with build number NPJS25.93-14-18.....I think its april 2018 update
Click to expand...
Click to collapse
actually i did not know what did hey doo
what to do for the start up problem ith always starts with the boot loader
charuvilapauljohn said:
actually i did not know what did hey doo
what to do for the start up problem ith always starts with the boot loader
Click to expand...
Click to collapse
I'm confused by what help you're asking for, as you appear to be asking for help on how to fix a hard bricked device, and yet also asking for help on your device starting with the bootloader. If your device is fully hard bricked, then you wouldn't have a bootloader to boot to... Can I thus ask please is your device still in a blinking light state or are you now booting to the bootloader?
I asked you also in your other post if using fastboot oem fb_mode_clear would work in clearing the bootloader start: https://forum.xda-developers.com/showpost.php?p=76927663&postcount=421 However, if your device is truly hard bricked (and is in the Qualcomm HS-USB 9008 mode), then you need to try the blankflash as linked above, then re-flash the stock ROM - the NPJS25.93-14-18 April 2018 fastboot ROM and guide is here: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
thanks..it worked
It worked...thanks a lot...I installed NPJS25.93-14-18 rom....
Now there is another problem..both the sim and the finger print is not working
charuvilapauljohn said:
It worked...thanks a lot...I installed NPJS25.93-14-18 rom....
Now there is another problem..both the sim and the finger print is not working
Click to expand...
Click to collapse
That's because you phone model is changed to G4 only (not plus,) and lost 2nd IMEI... (Check in about section)
If it's changed to G4, follow,
Follow linked thread to solve: post #139, and better to read all posts to get correct information. (Turn pages to Download correct HW.img that's meant for your device model)
https://forum.xda-developers.com/mo...luss-model-changed-to-g4-lost-t3496912/page14
the hw.img file not working
____Mdd said:
That's because you phone model is changed to G4 only (not plus,) and lost 2nd IMEI... (Check in about section)
If it's changed to G4, follow,
Follow linked thread to solve: post #139, and better to read all posts to get correct information. (Turn pages to Download correct HW.img that's meant for your device model)
https://forum.xda-developers.com/mo...luss-model-changed-to-g4-lost-t3496912/page14
Click to expand...
Click to collapse
As I found a hw.img file for my xt1643.and i tried to install.The TWRP RECOVERY got struck.And the adb command prompt is not showing anything
Hey, have been looking for the stock rom link for days now no luck!!. I wamma downgrade and will appreciate all the help thanks guys. Kindly help me with a working link?
Follow: https://forum.xda-developers.com/nokia-5/how-to/guide-how-to-downgrade-official-oreo-to-t3746007 but be careful
i have Nokia Ta-1053. sometimes boot. most of the time its dead. i tried to connect pc. it shows Qualcomm Hs-Usb Diagnos 900E. i have changed manually to HS-USB qdload9008. but still can't flash or format.