HI
Moto X Xt1575 Bricked and stuck in qualcomm drivers
how to solve ?
be more specific to get help real quick...
You are in Qualcomm HS-USB QDLoader mode? Your toast... There is no recovery from that, Moto does not give out the necessary files to recovery from that and none have ever leaked out.
Sorry bro...
acejavelin said:
You are in Qualcomm HS-USB QDLoader mode? Your toast... There is no recovery from that, Moto does not give out the necessary files to recovery from that and none have ever leaked out.
Sorry bro...
Click to expand...
Click to collapse
dammmm... jtag files might help but its only available with Motorola... u gotta hurry up to service center
Maybe some already know me for so much help that he asks for MXPE but really that there is no longer to do, my phone just barely start with custom rom's with the officers always throw me prevail flash error bootloader and it does not start, at Start with customs has no signal with my operator and also the IMEI is changed. I do not know whether to give it for lost or to continue trying to have someone understand and able to give me the help that I really need. I would be most grateful if you could help me.
P.D: and try to flash fastboot the last official rom of the page and still nothing. Continues with the same prevalid flash error bootloader.
My regards.
I flashed RR's Nougot 7.1.1 Custom ROM on my Moto X Style XT1572, everything working fine but Tethering is not visible in Wireless and Networks
My Pure took the OTA, then after logging into google and installing all my apps, the unit was draining the battery so I plugged in the Charger and continued on, then 30 minutes later my XT1575 shut down, not it doesn't want to fire up. What can I do??
Related
I just tried to restore stock image with fastboot mode, but somethings wrong and now my phone is dead.
No boot, no vibrate, no bootloader, only the black screen and nothing appears.
And qhsusb_bulk device is detected when I connected phone to my computer.
I tried fastboot and adb sideload but it didn't work. How can I restore my phone?
Please help me fix this! :crying::crying:
pi.zero said:
I just tried to restore stock image with fastboot mode, but somethings wrong and now my phone is dead.
No boot, no vibrate, no bootloader, only the black screen and nothing appears.
And qhsusb_bulk device is detected when I connected phone to my computer.
I tried fastboot and adb sideload but it didn't work. How can I restore my phone?
Please help me fix this! :crying::crying:
Click to expand...
Click to collapse
No known way except JTAG service, although I can't recall a Moto X Pure/Style being done successfully... Otherwise contact Moto Customer Care or take it to a service center.
Unfortunately, on these devices a hard-brick is exactly that, bricked.
i have a unit same problem hard bricked
No solution yet
pi.zero said:
I just tried to restore stock image with fastboot mode, but somethings wrong and now my phone is dead.
No boot, no vibrate, no bootloader, only the black screen and nothing appears.
And qhsusb_bulk device is detected when I connected phone to my computer.
I tried fastboot and adb sideload but it didn't work. How can I restore my phone?
Please help me fix this! :crying::crying:
Click to expand...
Click to collapse
were you able to resolve your issue?
Welp... looks like I joined this club. I downgraded to sept security patch without an issue but when upgrading to december.... I get this.
@gokart2 I know this is a long shot but I'll ask anyway haha. Seeing that you've done a ton of help and support on this device and mind you, I will be the guinea pig in this whole process whether it borks the phone even more or not. Do you think you can attempt to modify this process with Moto X Pure's bootloader and I will attempt to run it? If not, no biggie.
https://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
Ended up going through moto repair and had them send me a new XT1575 for 75 bucks. Thanks anyway... no more messing with downgrading boot loaders anytime soon.
Doubt I could have done much good. New phone for $75 isn't too bad though.
Hi everyone
I tried to updade my huawei nova CAN-L11C530B130 to CAN-L11C432B340
I think the copy/paste of the UPDATE.APP ****ed up beacause the transfer time was very short...Anyway the phone accepted the update but turned off after that.
Now I can't boot, no recovery, no download mode, not even a charging led light.
Please tell me there is a way besides RMA
Thank you very much :good:
Well, either there is no charge (try keeping it on charger for a few hours) or it is totally bricked based on what you said. If it is completely unresponsive there is really nothing you can do.
Boot loader doesnt start as well?
Thanks for your help
I tried an all night charching but It did not help, no boot loader either.
What about the version I had : CAN-L11C530, I don't find any results about it on the internet, strange right ?
When I plug the phone to my computer I get "Qualcomm HS-USB QDLoader 9008 (COM3)"
You could try contacting Huawei support, their is a qualcomm flash tool. You need the tool and the rom to use it. I know it worked on the Nexus 5, but have seen nothing like it for us. I would try going to a shop and asking, but I do not know how viable that is for you.
Thank you wangdaning, it's very kind of you
I'm gonna leave the phone to the carrier who will send it to huawei.
I'm just surprised how easy it was to brick, I have a honor 8 and a mate 8 and it never happened.
I wonder if it comes down to it being a defective device. I have run circles of flashing on mine and it does not brick. I am running Lineage and even the build is not for my device. I have manually flashed partitions, wiped and reflashed partitions (in fastboot). I have made it unusable at times, but never bricked. It works fine now. Seems it might just be an unlucky bad unit you got. Hopefully you had all your stuff backed up and hopefully you get a unit that works well next time.
The phone battery was about 25%. I decided to do ota update. The phone was connected and charged by laptop. The process was successful. But when I selected and pressed restart to bootloader, the screen went black. The charger could not power it on, could not charge too (the phone was not hot). What happened to my phone, guys. Is there anyway to revive it? Sound was played when it connected to PC. But no device was showed.
Thankssssss
has anyone got the ramload and bootloader single image for X Style
What is the state of your phone?
Give us more info if you want any help. @mr_5kool
If your device powered off during the bootloader flash and all you get now is Qualcomm QDLoader... it's done, there is no blankflash file or other recovery method if you cannot get to fastboot. Sorry.
The pc now only shows hs-usb qdloader9008
@@
Bootloader dead
I need files to blankflash bootloader
Is there anyway to create 8992.mbn for X Style
mr_5kool said:
The phone battery was about 25%. I decided to do ota update. The phone was connected and charged by laptop. The process was successful. But when I selected and pressed restart to bootloader, the screen went black. The charger could not power it on, could not charge too (the phone was not hot). What happened to my phone, guys. Is there anyway to revive it? Sound was played when it connected to PC. But no device was showed.
Thankssssss
Click to expand...
Click to collapse
Sorry, don't know how to help with this device when it's in QDLoader 9008 mode, haven't seen blankflash for the XT157x.
Were you running stock 7.0 bootloader then downgrade and take a 6.0 OTA to brick the bootloader? Just curious.
Hope someone can help.
mr_5kool said:
The pc now only shows hs-usb qdloader9008
@@
Bootloader dead
I need files to blankflash bootloader
Click to expand...
Click to collapse
mr_5kool said:
Is there anyway to create 8992.mbn for X Style
Click to expand...
Click to collapse
No... Moto does not does not provide those files and all attempts to create or use a different one have failed.
Sorry, but it's just a brick now.
there's no way you can fix your phone now.. email motorola regarding this issue they might ask you to send your phone to some shop or service center
(if your country has one) and they might fix your phone.. but no guarantee about that also
you'll have to spend a lot for this fix..
hello ,
I had installed rescurssion remix rom on my phone and i had decided to change to stock rom. So I give my mobile to a mobile shop and they repaired and changed to stock rom.!!!!actually the problem is......after the repair of my mobile in the mobile shop when I switch power on it directly go to boot loader instead of showing boot logo..After that when it shows the update I updated . It suddenly HARD BRICKED.Only the white light near fingerprint sensor worked while charging. please help meee...:crying::crying::crying::crying:
please help me to make my mobile in good condition ........by solving the boot loader issue which shows as the start up...
If I've read your post correctly, you used an OTA update and that's when you had the white light blinking? When you connect your device to your computer, what is your device recognised as? Is it recognised as Qualcomm HS-USB 9008 or similar?
If so, you may wish to look at this guide to try to get your device fixed: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
Do you know what the shop did for the repair, what stock ROM did they flash to your device?
echo92 said:
If I've read your post correctly, you used an OTA update and that's when you had the white light blinking? When you connect your device to your computer, what is your device recognised as? Is it recognised as Qualcomm HS-USB 9008 or similar?
If so, you may wish to look at this guide to try to get your device fixed: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
Do you know what the shop did for the repair, what stock ROM did they flash to your device?
Click to expand...
Click to collapse
yes it recognize as Qualcomm HS-USB 9008 something like that
the shop has installed rom with build number NPJS25.93-14-18.....I think its april 2018 update
charuvilapauljohn said:
yes it recognize as Qualcomm HS-USB 9008 something like that
the shop has installed rom with build number NPJS25.93-14-18.....I think its april 2018 update
Click to expand...
Click to collapse
actually i did not know what did hey doo
what to do for the start up problem ith always starts with the boot loader
charuvilapauljohn said:
actually i did not know what did hey doo
what to do for the start up problem ith always starts with the boot loader
Click to expand...
Click to collapse
I'm confused by what help you're asking for, as you appear to be asking for help on how to fix a hard bricked device, and yet also asking for help on your device starting with the bootloader. If your device is fully hard bricked, then you wouldn't have a bootloader to boot to... Can I thus ask please is your device still in a blinking light state or are you now booting to the bootloader?
I asked you also in your other post if using fastboot oem fb_mode_clear would work in clearing the bootloader start: https://forum.xda-developers.com/showpost.php?p=76927663&postcount=421 However, if your device is truly hard bricked (and is in the Qualcomm HS-USB 9008 mode), then you need to try the blankflash as linked above, then re-flash the stock ROM - the NPJS25.93-14-18 April 2018 fastboot ROM and guide is here: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
thanks..it worked
It worked...thanks a lot...I installed NPJS25.93-14-18 rom....
Now there is another problem..both the sim and the finger print is not working
charuvilapauljohn said:
It worked...thanks a lot...I installed NPJS25.93-14-18 rom....
Now there is another problem..both the sim and the finger print is not working
Click to expand...
Click to collapse
That's because you phone model is changed to G4 only (not plus,) and lost 2nd IMEI... (Check in about section)
If it's changed to G4, follow,
Follow linked thread to solve: post #139, and better to read all posts to get correct information. (Turn pages to Download correct HW.img that's meant for your device model)
https://forum.xda-developers.com/mo...luss-model-changed-to-g4-lost-t3496912/page14
the hw.img file not working
____Mdd said:
That's because you phone model is changed to G4 only (not plus,) and lost 2nd IMEI... (Check in about section)
If it's changed to G4, follow,
Follow linked thread to solve: post #139, and better to read all posts to get correct information. (Turn pages to Download correct HW.img that's meant for your device model)
https://forum.xda-developers.com/mo...luss-model-changed-to-g4-lost-t3496912/page14
Click to expand...
Click to collapse
As I found a hw.img file for my xt1643.and i tried to install.The TWRP RECOVERY got struck.And the adb command prompt is not showing anything
I bricked my moto x pure over a year ago when k knew nothing about phones or twrp or flashing. I flashed a custom rim which obviously wasn't the right one. From that day forward no sign of life. Computer detects phone as Qualcomm hs qloader 9008. No Fastboot or bootloader screen. I feel I wiped it dry no firmware whatsoever on the device. ANY HELP IS GREATLY APPRECIATED
email: [email protected]
Unfortunately there is no fix for this... Qloader mode means it needs to be "blankflashed" but those files have never leaked out of Moto for any version or variant of X Style/Pure.
Your only possible solution would be to contact any of the online "JTAG" programming services and see if they are willing to tackle it...