maybe am posting in the wrong thread, but guys i need your help
first of all i download oreoo firmware with 3 updates files by mistake i did not backup my firmware by twrp
and i wiped the system and cash .
now my phone for sure is not booting. sure huawie mate 9 pro has not sd card so i tried to use otg usb connection
. i tried to connect my phone to pc to use adb slideload but driver is not recognized.....................
some one help me if there is any tool can flash the original stock rom
Related
Please help. I have k4 note A7010a48 which has 16GB and 3GB updated to S219. I had rooted my device with TWRP and SuperSU 2.78. I wanted to update my device to latest version which is s232. Hence after suggestion and searching through the internet, i recently flashed stock recovery.img whose size was 13MB via SP Flash Tool. Now my phone is constantly going through boot loop. though i am able to go to stock recovery i dont have any idea how to remove my boot loop. i tired searching in XDA forums too but i could only see that it has stock rom of A7010 only. please help. My computer's OS is windows 10. if it may help. also i think that the drivers that i have for this device isnt functioning properly. i have a TWRP backup of my phone also. i would be very grateful if anyone could kindly help me get through this mess.
flash it with spflashtool to the current official rom, should fix your device, though it might erase your imei numbers which you'll need to restore incase that happens...
good luck!
hi guys, hopefully someone can help me with my situation. I try to explain as best i can.
My Device: huawei nxt-L29
Build number : nxt-L29c636b585
( I install right firmware for my phone )
1. i follow this guide (https://forum.xda-developers.com/mate-8/general/guide-unlock-bootloader-root-install-t3301371 ) to Unlock Bootloader, Root, Install TWRP & Decrypt.
All working perfectly until last step "Decrypt",
Instead of format data - type yes... I do my mistake by click Advance Wipe and click Erase Data. And the phone stuck on loop bootloader.
2. I try to flash stock recovery for nougat and flash UPDATE.APP on EMUi recovery but failed.
Then I follow this guide for huawei p8 because i cannot find any related entry similar with my situation in Mate 8 forum ( https://forum.xda-developers.com/huawei-p8/how-to/guide-how-to-unbrick-huawei-p8-failed-t3260704). And use Huawei Extractor to extract boot.img, system.img and recovery.img and flash it in fastboot mode.
All work perfectly and my phone restart like normal.
3. The problem after my phone unable to lock gps correctly (cannot use all because always changing position),cannot turn on bluetooth and unable to change ringtone/notification, and maybe a few more problem. i think its because I didnt flash all file in UPDATE.APP.
4. The question is how do i flash UPDATE.APP and get it fully work, because if i flash on EMUI recovery it always failed on 1-5%? Just for info in Update.app, there is 2 recovery image which is recovery.img and recovery2.img, do i need to flash both to try flash on EMUI again?
Hope you guys understand me,i not english speaker...Thanks,
any question just ask below.
Opening one topic will suffice :good:
The mate 8 actually has 2 update packages, the undate.zip and the update_full_hw_eu.zip, both need to be flashed, can be done via twrp, I suspect you are also missing settings like update and apps like file manager, I've done it the way you have and ended up with that problem
Download and install data zip
Pfeffernuss said:
Opening one topic will suffice :good:
Click to expand...
Click to collapse
actually i try to delete this thread and open new thread on Q&A section, but cant find the delete button..:crying:
shae23 said:
The mate 8 actually has 2 update packages, the undate.zip and the update_full_hw_eu.zip, both need to be flashed, can be done via twrp, I suspect you are also missing settings like update and apps like file manager, I've done it the way you have and ended up with that problem
Click to expand...
Click to collapse
I not sure about that 2 update package that you mention, in my case 2 zip file i download from this link is both in update.zip, google this (Huawei Mate 8 Latest Firmware Collections - Get Droid Tips).
Btw, i solved the problem by rollback to 6.0 and just updating back to nougat via ota.
please help me i hase emui 4..1
and i install twrp 4.1 and when i install nougat i install
supersu_v2.79_sr2 then
update_2 but when istall update it stop on writinh ratio i shut dun the phone but no login to twrp or to stock recovery
help me plaese
Hi
I got my self in quite a pickle here..
so advice or help is very welcomed.
I own a Huawei P10 lite,
with a software version WAS-LX1AC900B049
First off I unlocked the phone, then flashed TWRP recovery, and thus far everything was ok
I wanted to install Lineage 14.1 OS, and I failed because my version of the phone is not supported..
but during attempt installation of Lineage OS , I deleted data, system, dalvik, and cashe..
I did not make a backup!!! (major mistake, I know..)
so effectively I deleted my OS :-/ ..
but it isn’t over jet..
because I could not find a stock rom, namely WAS-LX1AC900B049 version
I thought of debranding my phone to Orange, namely WAS-LX1AC109B110 because stock roms for Orange are available on the net.
so.. using TWRP I replaced oeminfo file..
(this time making a backup of oeminfo)
but once I downloaded Orange stock rom, put it on the
sdcard in /dload folder and entered download mode on the phone, nothing happened, update failed
but.. also changing oeminfo resets the system so I guess that turned off USB debugging..
so now the TWRP is not available because of the system reset, and in the fastboot and rescue mode , adb program from Windows, does not detect device..
so..
it seems I have 3 options..
1. somehow install Orange stock rom
2. make fastboot and rescue mode to work properly so I can reinstall TWRP and go further from there
3. find original stock rom WAS-LX1AC900B049, may be it will work
by the way erecovery does not work, it conects to the wifi, starts serching, and then fails
Help please..
I unbricked the phone
for anyone interested I used adb to unlock the phone in fastboot and rescue mode..
the phone was showing me a message that it was unlocked but it was not
once unlocked previously installed TWRP booted immediately, so from there I installed Lineage 14.1 by HassanMirza01 and it works great
Happy that you fixed your problem but how did adb detected your device as you mentioned it didn't at the first place?
Planning on going back to stock and I think the same trouble would happen for me too.
oH MY GOD!
ultragorki said:
Hi
I got my self in quite a pickle here..
so advice or help is very welcomed.
I own a Huawei P10 lite,
with a software version WAS-LX1AC900B049
First off I unlocked the phone, then flashed TWRP recovery, and thus far everything was ok
I wanted to install Lineage 14.1 OS, and I failed because my version of the phone is not supported..
but during attempt installation of Lineage OS , I deleted data, system, dalvik, and cashe..
I did not make a backup!!! (major mistake, I know..)
so effectively I deleted my OS :-/ ..
but it isn’t over jet..
because I could not find a stock rom, namely WAS-LX1AC900B049 version
I thought of debranding my phone to Orange, namely WAS-LX1AC109B110 because stock roms for Orange are available on the net.
so.. using TWRP I replaced oeminfo file..
(this time making a backup of oeminfo)
but once I downloaded Orange stock rom, put it on the
sdcard in /dload folder and entered download mode on the phone, nothing happened, update failed
but.. also changing oeminfo resets the system so I guess that turned off USB debugging..
so now the TWRP is not available because of the system reset, and in the fastboot and rescue mode , adb program from Windows, does not detect device..
so..
it seems I have 3 options..
1. somehow install Orange stock rom
2. make fastboot and rescue mode to work properly so I can reinstall TWRP and go further from there
3. find original stock rom WAS-LX1AC900B049, may be it will work
by the way erecovery does not work, it conects to the wifi, starts serching, and then fails
Help please..
Click to expand...
Click to collapse
YOU DID AS EXACTELLY AS ME ...HAHAHAHAHAHAHAH and now im still tryiong to find it solutution ...have you found some?
I hope someone haven't post this question yet because I already try to search on google about this but there's aren't any solution for it yet.
I bought Huawei P10 Plus 256GB from China (VKY-AL00) and I want to changed it to International firmware but when I boot to TWRP recovery my laptop can't detect the phone. I even looked at Device Manager but there 's nothing happen when I plugged the phone. If I boot normally or fastboot mode, my laptop can detect the phone and I able to access the files from internal/external storage. I tried to flash update.zip, update_all_hw.zip and update_data_public.zip directly using TWRP but it only giving me "error 9".
My phone spec:
-Huawei P10 Plus 256GB (VKY-AL00)
-Storage type: UFS
-ROM Version: 8.0.0.336 OREO
-twrp 3.2.1-0 oreo 2 version
jula182 said:
I hope someone haven't post this question yet because I already try to search on google about this but there's aren't any solution for it yet.
I bought Huawei P10 Plus 256GB from China (VKY-AL00) and I want to changed it to International firmware but when I boot to TWRP recovery my laptop can't detect the phone. I even looked at Device Manager but there 's nothing happen when I plugged the phone. If I boot normally or fastboot mode, my laptop can detect the phone and I able to access the files from internal/external storage. I tried to flash update.zip, update_all_hw.zip and update_data_public.zip directly using TWRP but it only giving me "error 9".
My phone spec:
-Huawei P10 Plus 256GB (VKY-AL00)
-Storage type: UFS
-ROM Version: 8.0.0.336 OREO
-twrp 3.2.1-0 oreo 2 version
Click to expand...
Click to collapse
I have the same issue with error 9 and TWRP doesn't support USB yet for Oreo it seems. I think the problem is TWRP is reading the folders as encrypted on the update section (folders show as random characters) but seems to see folders somewhat in the File Manager. I'm sure this is a work in progress by the fine folks in this forum as TWRP website doesn't show the P10 Plus.
What I did was flash back to Nougat using HWOTA, then back to Oreo also using HWOTA. Had to do this a bunch of times through my experimentation and it works well enough to get a clean Oreo install that accepts Huawei OTA updates. Both links are for a different model but I'm sure there's something for AL00, just want to you know what worked for me with the L29.
Downgrade here - https://forum.xda-developers.com/p10-plus/development/downgrade-p10-plus-oreo-to-nougat-t3724382
Upgrade here - https://forum.xda-developers.com/p10-plus/how-to/huawei-p10-plus-debrand-rebrand-update-t3715288
Download both the update and downgrade from Firmware Finder, I tried the DNS method but with TWRP it won't work. Download it, but make a copy because the HWOTA2 script from the downgrade removes the update.zip at the end (didn't bother trying to find out why, I just copy it back in when I need it). When I used the firmware in the links above I wasn't able to update through Huawei OTA, the firmware from FF with checking access before download gave me the best results.
Im recently trying to downgrade my zte axon 7 but when i install it i always get an error.i dont know if its my phone or the update.zip file.
My build number is A2017GV1.3.0B04. I cant install it using my pc because it wont recognize it.
Try this
Read steps and download the tools and USB drives only
DO NOT flash other files on A2017G.
https://forum.xda-developers.com/showpost.php?p=70951592&postcount=1
For firmwares
https://forum.xda-developers.com/showpost.php?p=70899621&postcount=1
Amdak88 said:
Read steps and download the tools and USB drives only
DO NOT flash other files on A2017G.
https://forum.xda-developers.com/showpost.php?p=70951592&postcount=1
For firmwares
https://forum.xda-developers.com/showpost.php?p=70899621&postcount=1
Click to expand...
Click to collapse
After installing the driver it still not work but maybe you know what update.zip to downgrade from 8.0 to 7.0