Database Users

Upgrade from 6.0.1 to 7.0 on A2017G stock

Hi, I am looking for help to get from 6.0.1 to 7.0 on my A2017G. I am currently on B10 with an unlocked bootloader.
This is what I have tried so far:
a. Route via OTAs and zips on sdcard:
a1. B10 with stock recovery. Android works. Got here from B9 with OTA B10 installed via stock recovery from sdcard (downloaded B10 OTA from German ZTE site).
a2. Updated from Android with the Axon7_Nougat-7_0.zip OTA on my sdcard (downloaded from the German ZTE site). Miflash completes without any error message.
a3. Result: phone reboots, after Axon splash screen, phone switches to edl mode (in windows: Qualcomm HS-USB QDLoader 9008).
a4. When I reboot to recovery, I can see that the recovery is 7.0.
b. Route via OTAs and N zip via adb sideload:
b1. B10 with stock recovery.
b2. In stock recovery, "flash from adb".
b3. On windows 10 laptop: adb sideload Axon7_Nougat-7_0.zip. Result: error message "* cannot read 'Axon7_Nougat-7_0.zip' * ".. Zip opens fine on laptop.
c. Route via TWRP and leaked Nougat 7.0:
c1. B10 with TWRP recovery, version 3.1.0-0-ailsa_ii.
c2. Flash ZTE_A2017G.Nougat_leaked_09_03_2017 BootStack and StockSystem by Tron1.
c3. Result: phone reboots to Axon splash and then switches to edl mode, same as a3.
d. Route via TWRP and complete fota update fota_update_A2017GV1.2.0B01_complete.zip
d1. Same result as c.
I have experience flashing with my HTC m7 but on the A7, it seems there are many more ways to make things go wrong and I have no clue where I am going wrong. Any help would be appreciated.
Some strange things:
1) my A2017G (bought in Germany via Amazon, it says A2017G on the back sticker) reports itself as a A2017U to my windows 10 laptop.
2) in stock recovery, when trying to flash from sdcard, I receive an error message that the A7 cannot mount the sdcard.

Replica - sorry

OK, it seems this thread finds lots of readers, so maybe someone can benefit from the solution that I finally found.
These were the steps I took:
a. Starting point was B10 stock (incl recovery) and unlocked bootloader, completely wiped.
b. Only way I could get the 7.0 update (downloaded from ZTE Germany) to work was by putting the .zip on a usb stick and using an OTG cable. Then, 'update' in settings found the zip and started to update. Result was v1.1.0B01
c. As soon as I booted into 7.0, it found the OTA for v1.2.0B02 and started to install that. So, I now finally have 7.1.1 stock with unlocked bootloader.
A big thank you to @raystef66 who provided lots of practical and moral support. Much appreciated.
How can I close the thread?

@piet8stevens Hi, I have a build number ZTE A2017G V1.0.0 B11, MIFavor UI 4.0, Android 6.0.1, Kernel 3.18.20 and I'd like to upgrade to more efficient less limitative version as I have battery drain and can't remove / change google main account with my version. Would you know what's the best version, Is the one you have now better? also do you know when you mess up the upgrade and your phone doesnt work can you still factory reset?

yann360 said:
@piet8stevens Hi, I have a build number ZTE A2017G V1.0.0 B11, MIFavor UI 4.0, Android 6.0.1, Kernel 3.18.20 and I'd like to upgrade to more efficient less limitative version as I have battery drain and can't remove / change google main account with my version. Would you know what's the best version, Is the one you have now better? also do you know when you mess up the upgrade and your phone doesnt work can you still factory reset?
Click to expand...
Click to collapse
AFAIK, you can always do factory reset. There are some good threads with all the files you need such as https://forum.xda-developers.com/axon-7/how-to/download-center-factory-images-ota-t3606547.
Not sure what you are looking for, but I had good experiences with RR and AEX Nougat. I am currently on RR (unofficial version) N. Am just waiting for O to stabilize a bit to make the switch - see AEX thread https://forum.xda-developers.com/axon-7/development/rom-aospextended-rom-v4-3-t3618950 . I run nanodroid and microG in order to protect my privacy from google. So, no gapps, no google maps etc... .

Relocked bootloader only boots into eRecovery :/

Hey guys. So this is my final conclusion over my 200 posts I made without any response.
Id like to update my phone to VKY-L09c432B369. My phone is rooted with TWRP3.1.1(i think) and custom kernel (that famous one for huawei p10 plus, just check the forums) and Magisk. Also unlocked bootloader.
But none of the methods avaible to do to update my phone is working.
-dload not working.
-flash zip in twrp not working
-hwota8 method not working
-force power-sound lower-sound higher update not worknig
So I was like f*ck it lets just relock the bootloader and let's install the update that way, right? It should work, right?
But when I "fastboot relock oem xxxxxxxxxxxxxxxxx" my phone only launches into eRecovery. Any idea how to fix it?
I toughed of boot.img reflash but that just doesn't work because in the VKY-L09C432B365 (version I have atm,) there's no boot.img so Idk what to do.
I'd really like this update because it adds face unlock
Thanks for any help.

My experience with oreo:
dload: doesn't work
hwota: doesn't work
force update: doesn't work
There are two methods that works
1) Firmware finder + erecovery click here
2) Flash full firmware with twrp:
Update Oreo to higher Oreo
https://www.androidfilehost.com/?fid=962157660013070538
Open zip and copy OREO_FLASH Folder to your external sd card.
Download your wanted firmware and copy into OREO_FLASH folder. Update.zip leave as it is and rename update_data_full_public to update_data_public and the last one to update_all_hw
Then flash oreo_update.zip in OREO_FLASH folder with TWRP
Hope it works for you, I have a P10, this week I ended with frp lock and bricked system and only erecovery, with Firmware finder method I fixed it.
ADVICE: Never relock your bootloader if you are not in stock firmware (a working firmware)
If you need help, this is my telegram @SwitchFoot

[SOLVED] NRD90M test-keys - Nougat Stock Firmware Huawei Mate 8

Hi all,
I just want to share with you all how i solved NRD90M test-keys on my Mate 8. 2 weeks ago, I've successful to debrand from L29 to AL10 and updated to Oreo EMUI 8. After awhile, i found bugs or error when i connected to PC or Laptop, my phone will go haywire like someone is touching the screen everywhere. I suspected it might be came from cust.img that i flashed to make sim and data detect.
Then i made a decision to debrand again to DL00, and successfully rollback to MM B386 using Hisuite version 8. After that i flashed dualcu_cn.zip using TWRP and successful to debrand to DL00. I checked the OTA update, there is DL00C00B577 Nougat update and i download and installed it. My Mate 8 became NRD90M test-keys after successfully updated to Nougat. For one and a half day i searched in internet and XDA on how to get rid of NRD90M test-keys and update to next build of Nougat. On XDA, I've found several thread regarding NRD90M test-keys like https://forum.xda-developers.com/mate-8/general/info-rom-nrd90m-test-keys-android-7-0-t3750147, https://forum.xda-developers.com/mate-8/help/nrd90m-test-keys-t3549124 and https://forum.xda-developers.com/mate-8/help/stuck-nrd90m-test-keys-t3590461 but without proper steps and procedures. So people like me a noob or newbies will stuck on how to solve the problem. So I've do some test for my Mate 8 by using one of this methods which are HuRUpdater, HWOTA and erecovery. I can said that 90% of chances rate it will success but you'll need to download FullOTA-MF stock firmware. I'm using erecovery so no need to download it.
Requirement:
1. Unlocked bootloader
2. TWRP Installed
3. HuRUpdater - Link : https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
4. HWOTA - Link: https://cloud.mail.ru/public/DEWc/a9fDVbgpz
5. update.zip - FullOTA-MF (for me NXT-DL00C17B592-full in erecovery)
6. update_all_hw.zip
7. update_data_public.zip
8. Back up your data using HiSuite or SD card.
Instruction
Method 1 using HuRUpdater
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HuRUpdater.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Make a new folder in SD Card root (you can name it base on its firmware) and put all the zips that you already downloaded in the folder.
4. Boot your Mate 8 to TWRP and choose sd card > folder > HuRUpdater.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Method 2 using HWOTA
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HWOTA.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Extract HWOTA.zip into HWOTA folder in your PC and put all the zips that you already downloaded in that folder. Copy HWOTA folder in your SD Card.
4. Boot your Mate 8 to TWRP and choose HWOTA folder and select nxt_hwota_update.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/mat...ate-8-t3785320. This HWOTA.zip also can use to flash OREO EMUI 8 firmware.
P/S: I think HuRUpdater and HWOTA is the same method but using different script binary.
Method 3 using eRecovery
1. Press Vol + and Power button at the same time for 3-5 sec.
2. Choose your WIFI (need strong connection), if not it will failed to download recovery firmware.
3. If your WIFI have a strong connection it'll start to download recovery firmware and install.
4. Wait until finish installation
5. Your phone will update to the newest build number base on your stock firmware.
P/S: If you're using C636,C432,C185, i think it's useless. because i'm from C636 it's never captured the recovery firmware. so in case if your phone bricked or test keys, you can use HuRUpdater method. This method only working on chinese variants is what i think.
Additional info:
DESCRIPTION FOR FIRMWARE
1- OTA Firmware: (Over The Air) That mean the update file can install on the available os and upgrade or fix some bugs. (if the update build number is compatible with your phone).
2- FullOTA: Full OTA firmware is Full package of firmware and it can unbrick your phone.
3- FullOTA-MF: Full OTA MF firmware is Full package of firmware and it can unbrick your phone model with any buid number.
4- FullOTA-PV: Full OTA PV firmware is a Point-Version firmware, which means it can unbrick your phone depend on build number.
5- OTA-PV: Point-Version, such firmware are designed to update from one version of android to another. (build number is important)
6- OTA-MF: MF is a multi-file firmware, which means that there are several update packages in it.
Source : http://huawei-firmware.com/pages/ext/a/description/index.html
All thanks goes to @zxz0O0 for HurUpdater.zip, @apat26 for his thread HWOTA, 4pda forum and Huawei community.

ceriqdesign said:
Hi all,
I just want to share with you all how i solved NRD90M test-keys on my Mate 8. 2 weeks ago, I've successful to debrand from L29 to AL10 and updated to Oreo EMUI 8. After awhile, i found bugs or error when i connected to PC or Laptop, my phone will go haywire like someone is touching the screen everywhere. I suspected it might be came from cust.img that i flashed to make sim and data detect.
Then i made a decision to debrand again to DL00, and successfully rollback to MM B386 using Hisuite version 8. After that i flashed dualcu_cn.zip using TWRP and successful to debrand to DL00. I checked the OTA update, there is DL00C00B577 Nougat update and i download and installed it. My Mate 8 became NRD90M test-keys after successfully updated to Nougat. For one and a half day i searched in internet and XDA on how to get rid of NRD90M test-keys and update to next build of Nougat. On XDA, I've found several thread regarding NRD90M test-keys like https://forum.xda-developers.com/mate-8/general/info-rom-nrd90m-test-keys-android-7-0-t3750147, https://forum.xda-developers.com/mate-8/help/nrd90m-test-keys-t3549124 and https://forum.xda-developers.com/mate-8/help/stuck-nrd90m-test-keys-t3590461 but without proper steps and procedures. So people like me a noob or newbies will stuck on how to solve the problem. So I've do some test for my Mate 8 by using one of this methods which are HuRUpdater, HWOTA and erecovery. I can said that 90% of chances rate it will success but you'll need to download FullOTA-MF stock firmware. I'm using erecovery so no need to download it.
Requirement:
1. Unlocked bootloader
2. TWRP Installed
3. HuRUpdater - Link : https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
4. HWOTA - Link: https://cloud.mail.ru/public/DEWc/a9fDVbgpz
5. update.zip - FullOTA-MF (for me NXT-DL00C17B592-full in erecovery)
6. update_all_hw.zip
7. update_data_public.zip
8. Back up your data using HiSuite or SD card.
Instruction
Method 1 using HuRUpdater
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HuRUpdater.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Make a new folder in SD Card root (you can name it base on its firmware) and put all the zips that you already downloaded in the folder.
4. Boot your Mate 8 to TWRP and choose sd card > folder > HuRUpdater.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Method 2 using HWOTA
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HWOTA.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Extract HWOTA.zip into HWOTA folder in your PC and put all the zips that you already downloaded in that folder. Copy HWOTA folder in your SD Card.
4. Boot your Mate 8 to TWRP and choose HWOTA folder and select nxt_hwota_update.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/mat...ate-8-t3785320. This HWOTA.zip also can use to flash OREO EMUI 8 firmware.
P/S: I think HuRUpdater and HWOTA is the same method but using different script binary.
Method 2 using eRecovery
1. Press Vol + and Power button at the same time for 3-5 sec.
2. Choose your WIFI (need strong connection), if not it will failed to download recovery firmware.
3. If your WIFI have a strong connection it'll start to download recovery firmware and install.
4. Wait until finish installation
5. Your phone will update to the newest build number base on your stock firmware.
P/S: If you're using C636,C432,C185, i think it's useless. because i'm from C636 it's never captured the recovery firmware. so in case if your phone bricked or test keys, you can use HuRUpdater method. This method only working on chinese variants is what i think.
Additional info:
DESCRIPTION FOR FIRMWARE
1- OTA Firmware: (Over The Air) That mean the update file can install on the available os and upgrade or fix some bugs. (if the update build number is compatible with your phone).
2- FullOTA: Full OTA firmware is Full package of firmware and it can unbrick your phone.
3- FullOTA-MF: Full OTA MF firmware is Full package of firmware and it can unbrick your phone model with any buid number.
4- FullOTA-PV: Full OTA PV firmware is a Point-Version firmware, which means it can unbrick your phone depend on build number.
5- OTA-PV: Point-Version, such firmware are designed to update from one version of android to another. (build number is important)
6- OTA-MF: MF is a multi-file firmware, which means that there are several update packages in it.
Source : http://huawei-firmware.com/pages/ext/a/description/index.html
All thanks goes to @zxz0O0 for HurUpdater.zip, @apat26 for his thread HWOTA, 4pda forum and Huawei community.
Click to expand...
Click to collapse
hello, in the meantime I thank you my mate8 is much improved the only problem is that I am still in NRD90M test-keys.

manuele16 said:
hello, in the meantime I thank you my mate8 is much improved the only problem is that I am still in NRD90M test-keys.
Click to expand...
Click to collapse
are you using HuRUpdater method?can you give me more info about your mate 8

ceriqdesign said:
are you using HuRUpdater method?can you give me more info about your mate 8
Click to expand...
Click to collapse
Of course...
Model number: NXT
No. Series: NRD90M Test Keys
Emui: 5.0
Android: 7.0
Vendor: hw
Country: meafnaf
please consider that my goal is to make it NXT-L29C432.
Originally on the box is reported NXT-AL10

manuele16 said:
Of course...
Model number: NXT
No. Series: NRD90M Test Keys
Emui: 5.0
Android: 7.0
Vendor: hw
Country: meafnaf
please consider that my goal is to make it NXT-L29C432.
Originally on the box is reported NXT-AL10
Click to expand...
Click to collapse
So originally you came from NXT-AL10 and without changing oeminfo with SRK Tool then you used the HuRUpdater?
Is it your bootloader still unlocked or locked?

I did not change oeminfo, or rather I tried with SRK tool, but I did not succeed.
Yes, I used HuRUpdater.
Bootloader unlocked

manuele16 said:
I did not change oeminfo, or rather I tried with SRK tool, but I did not succeed.
Yes, I used HuRUpdater.
Bootloader unlocked
Click to expand...
Click to collapse
I managed to get Vendor: hw and Country: eu.
but I'm still in nrd90

manuele16 said:
I did not change oeminfo, or rather I tried with SRK tool, but I did not succeed.
Yes, I used HuRUpdater.
Bootloader unlocked
Click to expand...
Click to collapse
Yup no wonder you're on NRD90M..you need to change oeminfo first before flash c432 firmware..

TWRP Huawei mate 8
Hello, my people, how are you?
I have a doubt, the truth is I am very new in this.
I have a Huawei Mate 8 NXT-L29 which updates to Android 7 with an app called "Firmware Finder for Huawei" and then I started my problems, the clock does not work, I can not enter the updater among others. What I would like is to change that rom for another or if it were for a stock.
I have the bootloader open and a TWRP (twrp-3.2.3-0-next) which is the only one that has worked for me but I have not been able to install another rom it tells me this: "error when dismounting" / '/ cust /' (invalid argument) and I do not know what I'm doing wrong ...
the compilation that this app left me is: NRD90M test-keys
and the rom that I want to install is: NXTL26C605B580
I would like to know your recommendations and corrections to what I am doing and thank you and I apologize for my English, which is very bad!

riky26 said:
Hello, my people, how are you?
I have a doubt, the truth is I am very new in this.
I have a Huawei Mate 8 NXT-L29 which updates to Android 7 with an app called "Firmware Finder for Huawei" and then I started my problems, the clock does not work, I can not enter the updater among others. What I would like is to change that rom for another or if it were for a stock.
I have the bootloader open and a TWRP (twrp-3.2.3-0-next) which is the only one that has worked for me but I have not been able to install another rom it tells me this: "error when dismounting" / '/ cust /' (invalid argument) and I do not know what I'm doing wrong ...
the compilation that this app left me is: NRD90M test-keys
and the rom that I want to install is: NXTL26C605B580
I would like to know your recommendations and corrections to what I am doing and thank you and I apologize for my English, which is very bad!
Click to expand...
Click to collapse
Sorry for late reply as for now i'm quite busy with life..can you tell me what your model before you change to NXTL26C605B580?

relock bootloader+rom stock+encryption unsuccessfull !!

Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help

toto6976 said:
Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help
Click to expand...
Click to collapse
Try to install Service ROM from SD card using dload method.
Link:
https://androidhost.ru/41d
Follow instructions in file "ReleaseDoc". (Read everything carefully before doing anything).
Through this process, your data will be deleted and bootloader will be locked again.
Dload method works with Stock Recovery only, you have to install Stock Recovery first.

toto6976 said:
Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help
Click to expand...
Click to collapse
Hey dude !!
So you bricked the device ....
I don't know why but if you want B412 firmware
you can use @-Alf- guide and re-upgrade via Firmware Finder
to B370 fullota-mf-pv first, then to B412 fullota-mf...
Or download a previous from B412 firmware (ex: VNS-L31C432B410 fullota-mf)
and use HuRupdater method to flash the firmware.
Extract then stock recovery from B410 via Huawei Extractor and flash it via TWRP.
Re-update finally to B412 using Firmware Finder.
I can help you doing this, worked on my ex device but i can't guarantee 100%.
Cheers

Dadditz said:
Hey dude !!
So you bricked the device ....
I don't know why but if you want B412 firmware
you can use @-Alf- guide and re-upgrade via Firmware Finder
to B370 fullota-mf-pv first, then to B412 fullota-mf...
Or download a previous from B412 firmware (ex: VNS-L31C432B410 fullota-mf)
and use HuRupdater method to flash the firmware.
Extract then stock recovery from B410 via Huawei Extractor and flash it via TWRP.
Re-update finally to B412 using Firmware Finder.
I can help you doing this, worked on my ex device but i can't guarantee 100%.
Cheers
Click to expand...
Click to collapse
Please read carefully, Maestro :
"I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom."
Piece.

Hello,
I reinstalled the custom rom that I found on the net: C432B414 with Hurupdater.
It works.
However, the bootloader is still unlocked ... however, I would like to return to the factory configuration with the bootloader locked.
https://www.cjoint.com/c/JItgZO6GuGB
I have the stock recovery install :
https://www.cjoint.com/c/JItg7SqQmdB
I am currently downloading the file indicated by this link : https://androidhost.ru/41d
In the file provided by Alf, there are two files:
'HUAWEI P9 Lite Android7.0 rollback to Android6.0 operation instruction'
'HUAWEI VNS-L31C432B416 Software Upgrade Guideline'
which one do I choose

toto6976 said:
I am currently downloading the file indicated by this link : https://androidhost.ru/41d
In the file provided by Alf, there are two files:
'HUAWEI P9 Lite Android7.0 rollback to Android6.0 operation instruction'
'HUAWEI VNS-L31C432B416 Software Upgrade Guideline'
which one do I choose
Click to expand...
Click to collapse
Unpack downloaded .zip package, you will see two files - ReleaseDoc and Software. Open "Software" and unpack SDUpdate_Package.tar.gaz. Transfer file dload to SD card and follow instructions - there is 'Software upgrade guidline' in file ReleaseDoc.
Edit.:
You can also safely lock BL with OEMINFO flashing and rollback to A6:
-Download OEMINFO:
https://mega.nz/#!xhEwFYLZ!Sv2nB5GERB_js76sAUWxj8hQgsjnf_YPobVbtrxpCew
Transfer it to the SD Card.
Download VNS-L31C432B160 fullupdate.zip:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66015/f1/full/update.zip
Create a folder dload on your SD , unpack downloaded .zip file and copy it to the dload folder.
Install TWRP 3.1.0-2:
https://mega.nz/#!EsESQQhK!uc_lfXEfDW6U7Lq2VeNOYq5OWUID0G-YyhK-oUL4deU
using command
fastboot flash recovery2 twrp.img (OVER eRECOVERY!) , boot in TWRP, fĺash oeminfo.zip , go back to TWRP's main menu, select Reboot and Power Off. Then use three button combo and flash firmware from dload. Your phone will running A6 with locked bontloader. If you want, you can upgrade back to A7 via OTA update or using Fipmware finder.

updating to 7.0

im having a huge problem, my mother purchaes a huawei p9 lite a couple of days ago, and its emui 4.1 and android 6.0
she wants to update it to android 7, and since i know thats possible, i tried to do that. but ive met nothing but failure
ive tried using the hisuite and hardware finder method, and all the others but i get the "this update package does not exist" error when downloading update 418.
my version is kind of weird, its vns-l31c432b130 which isnt a version ive seen elsewhere.
help? D:

I have this exact same issue
I have no idea how to upgrade the emui

PinkDovess said:
help?
Click to expand...
Click to collapse
For dual SIM only!
1. Unlock bootloader , (get unlock code here )
2. Install TWRP 3.0.2.0 (the p9 lite section is full of instructions on how to do it)
3. Download VNS-L31C432B370 fullOTA-MF-PV firmware (2 ZIP files), link:
https://cloud.mail.ru/public/D4kV/xcpuDX7Eu/
and copy downloaded files to the SD Card
4.reboot to TWRP, tap Install, Select storage Micro SDCard
5.Flash update с432b370.zip
6. go back without reboot (!!!), flash the additionnal package update_data_full_VNS-L31_hw_eu.zip
7. In TWRP's main menu select Reboot system.
Note: read the instructions carefully, check unfamiliar terminology by google or xda.
After successfully installing EMUI 5, you can upgrade to a higher build number via the dload method and Service ROM
B416
(Instructions can be found in ReleaseDoc folder).
Good luck!
P.S.:keep in mind that all firmwares that end with even numbers are for dual SIM (odd numbers are for single SIM).