Please help. I have k4 note A7010a48 which has 16GB and 3GB updated to S219. I had rooted my device with TWRP and SuperSU 2.78. I wanted to update my device to latest version which is s232. Hence after suggestion and searching through the internet, i recently flashed stock recovery.img whose size was 13MB via SP Flash Tool. Now my phone is constantly going through boot loop. though i am able to go to stock recovery i dont have any idea how to remove my boot loop. i tired searching in XDA forums too but i could only see that it has stock rom of A7010 only. please help. My computer's OS is windows 10. if it may help. also i think that the drivers that i have for this device isnt functioning properly. i have a TWRP backup of my phone also. i would be very grateful if anyone could kindly help me get through this mess.
flash it with spflashtool to the current official rom, should fix your device, though it might erase your imei numbers which you'll need to restore incase that happens...
good luck!
Related
Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:
I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!
bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!
there´s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...
Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,
As there are enormous bugs in the lolipop ota update for lenovo a6000 and a6000 plus I decided to revert back to Android KitKat.
Note: (For advanced users only) Go ahead if you have a little knowledge about flashing a stock rom.
1. Here is the link for the tutorial to revert back to KitKat for lenovo a6000 which also works for lenovo a6000 plus with some extra efforts
(although there is QFIL, flashing through the lenovo downloader is recommended as well as easy)
Mod edit: Link removed
Flashing requires a UPS backup or a laptop which won't shutdown in the middle as this process requires 6-8 mins
Done for Lenovo a6000.
IMP Note:
i. Do not unplug the usb cable if after plugging in the phone in download mode the adb interface driver is not installed by windows and flashing is started. Its normal.
ii. In lenovo downloader it will seem like the flashing is stuck after some seconds but it is not so the flashing is going on so DO NOT UNPLUG THE USB.
iii. In lenovo downloader in the step tab only the firehose is seen but it doesn't mean that flashing is stuck. Let the process finish without disturbing the USB cable. It will require 6 to 8 minutes or 15 minutes max.
Now futher steps for Lenovo a6000 plus:
This flashing will make your lenovo a6000 plus into lenovo a6000 and won't display ram and rom properly in device as well as your computer when connected via USB.
So for lenovo a6000 plus after flashing the lenovo a6000 stock rom:
2. you need to boot into cwm by fastboot https://youtu.be/giBK8LsL-Ko
3. and recover the cwm backup from the cwm recovery http://techolaty.net/lenovo-a6000-plus-stock-rom-cwm-backup/
4. Reboot your device from the same custom recovery after the restore is complete.
5. First boot will take up to 5-6 mins after that do a factory reset from the settings menu or from the stock recovery. If you don't perform a factory reset you will see your internal storage as 4.33gb only.
Video guide
All firmware updates work for Lenovo A6000 as we have flashed the original stock rom of lenovo A6000.
But as there is no stock rom available on the internet for lenovo A6000 plus, The minor firmware updates wont work for Lenovo A6000 plus it gives a status 7 error even after flashing the stock recovery, however the lollipop update gives an error status 14 but works fine.
Credits:
Boycracked
Ishtiyaq Husain
Techolaty.net
This can be done via recovery also
chhapil said:
This can be done via recovery also
Click to expand...
Click to collapse
yes but I was unable to boot into CWM in the lolipop I Don't know why. And I couldnt find any TWRP backup on the internet for lenovo a6000 plus.
ashutoshtaikar said:
I meant twrp backup file of stock kitkat rom is not available. I have the twrp recovery and it works for lolipop.
Click to expand...
Click to collapse
You dont need recovery backup to restore from recovery., You can flash the whole ROM all the way
this is too hard, but there is a simple way to revert back to kitkat
ashutoshtaikar said:
As there are enormous bugs in the lolipop ota update for lenovo a6000 and a6000 plus I decided to revert back to Android KitKat.
Note: (For advanced users only) Go ahead if you have a little knowledge about flashing a stock rom.
1. Here is the link for the tutorial to revert back to KitKat for lenovo a6000 which also works for lenovo a6000 plus with some extra efforts
(although there is QFIL, flashing through the lenovo downloader is recommended as well as easy)
Mod edit: Link removed
Flashing requires a UPS backup or a laptop which won't shutdown in the middle as this process requires 6-8 mins
Done for Lenovo a6000.
IMP Note:
i. Do not unplug the usb cable if after plugging in the phone in download mode the adb interface driver is not installed by windows and flashing is started. Its normal.
ii. In lenovo downloader it will seem like the flashing is stuck after some seconds but it is not so the flashing is going on so DO NOT UNPLUG THE USB.
iii. In lenovo downloader in the step tab only the firehose is seen but it doesn't mean that flashing is stuck. Let the process finish without disturbing the USB cable. It will require 6 to 8 minutes or 15 minutes max.
Now futher steps for Lenovo a6000 plus:
This flashing will make your lenovo a6000 plus into lenovo a6000 and won't display ram and rom properly in device as well as your computer when connected via USB.
So for lenovo a6000 plus after flashing the lenovo a6000 stock rom:
2. you need to boot into cwm by fastboot https://youtu.be/giBK8LsL-Ko
3. and recover the cwm backup from the cwm recovery http://techolaty.net/lenovo-a6000-plus-stock-rom-cwm-backup/
4. Reboot your device from the same custom recovery after the restore is complete.
5. First boot will take up to 5-6 mins after that do a factory reset from the settings menu or from the stock recovery.
I successfully reverted back my lenovo a6000 plus to kitkat and will upload a video guide soon on youtube.
Credits:
Boycracked
Ishtiyaq Husain
Techolaty.net[/QUO
this tutorial is for unbrick
for reverting back to kitkat there is a simple way
just flash twrp for lollipop and after that you can flash stock rom of kitkat..
goto mightylenovoa6000andplus.blogspot.com for more details about flashing twrp and stock rom
Click to expand...
Click to collapse
http://droidheap.blogspot.com/2015/12/lenovo-a6000-plus-storage-problems.html
This may cause the above problem which is listed in the link
plz help
guys
i have lenovo a6000 plus
i flashed lolypop stock rom by twrp
now my phone got bricked
my phone doesnt boot into twrp
i have tried in mobile repairs shop also but they also could not repair it
plz help me
srkale55 said:
guys
i have lenovo a6000 plus
i flashed lolypop stock rom by twrp
now my phone got bricked
my phone doesnt boot into twrp
i have tried in mobile repairs shop also but they also could not repair it
plz help me
Click to expand...
Click to collapse
Hahaha
It bricked my phone 100 times and repaired it myself
If you want help just contact me on
[email protected]
Sent from my GT-I9300I using Tapatalk
hai guys i need ur help i have bricked my phone and i am unable to get to download mode what shall i do
can some one make a stock recovery flashable kitkat rom
i tried to but its showing signature error
Kumarm93 said:
hai guys i need ur help i have bricked my phone and i am unable to get to download mode what shall i do
can some one make a stock recovery flashable kitkat rom
i tried to but its showing signature error
Click to expand...
Click to collapse
Unzip the stock zip then install system.zip and ota.zip
Sent from my GT-I9300I using Tapatalk
Lenovo A6000 Root Pop to Kitkat
i am tring QcomDloader For Root A6000 But by mistake Phone unpluged .tell me how revert back .mobile does not start.
how to Boot
hello guys,
my lenovo a6000+ phone got bricked when i was updating system update of MIUI7 custom rom & now it is not even booting recovery mode, how can i unbrick my phone any one to help??
can i use any stock rom on my lenovo a6000 plus ?????_ i have a file named as "Kraft-A6000-s_S015_150819_WCC8.zip
and if there is anybody knows the flashing process without cwm or any other custom recovery so plz gimme a link to understand it !!!!
dasanil0007 said:
hello guys,
my lenovo a6000+ phone got bricked when i was updating system update of MIUI7 custom rom & now it is not even booting recovery mode, how can i unbrick my phone any one to help??
Click to expand...
Click to collapse
Try to use adb first then flash new twrp
My A6000 plus is restarting continuously but it is entering in fastboot mode and download 9008 mode. Is it really a battery problem or something motherboard problem because I tried each and every method like flashing by QFIL with ROW firmwares like S013,S034,S061 etc. But phone isn't turning on normally it is bootlooping. Please help??. Not booting in stock recovery also.
I bricked my phone after doing an OTA Update with root and TWRP installed.. I've never had this hard time to unbrick a phone.. I am stuck at recovery, can't go to Download mode, SmartPhone Lenovo a1000 didn't work for the PC so I installed Universal drivers and it got recognised.
and everything is good until I get to flash the stock kdz. It says that my phone is not connected to the PC and can't continue flashing. I really need help on that because I can't get out of this by now and I really need to get it back on track..
Man, Why don't you back up your phone first :v Now It's really difficult to make your phone work correctly again :v
P/S: I'm using Lenovo A1000, too. Rooted and running TWRP. I haven't received any OTA so I don't know your feel, bro :v
transfer a prerooted flashable rom on micro SD,and flash it from recovery..try first w.o full wipe and if bootloops,with full wipe.
can i got this stock rom for my phone lenovo a1000 ..?? or cusrom samsung s5 replica for my phone..please..i needed now
Dear Seniors.
I am facing great hardship because my phone is stuck at boot logo.
No booting in recovery mode to flash another rom.
I did unlock bootloader of it by using tuliptool with success. After that i flashed custom rom in it. after reboot it is happening that.
Please suggest to recover it.
Did you flash twrp after unlocking? Did you make backup of stock ROM? Perhaps find a version of the factory firmware and flash that.
Dear I have no backup and i flashed TWRP recovery.......
It is to aware you that i did relock bootloader now my phone is working properly. but i am unable to enter recovery mode. !!!
Now my phone is running android 6.0.1 B02
But i am failed to root this rom uptill now due above mentioned problem.
modorate said:
Dear I have no backup and i flashed TWRP recovery.......
It is to aware you that i did relock bootloader now my phone is working properly. but i am unable to enter recovery mode. !!!
Now my phone is running android 6.0.1 B02
But i am failed to root this rom uptill now due above mentioned problem.
Click to expand...
Click to collapse
I found software update notification but when i update an error accruing while update. (This update not compatible with this device"
In easy words......... my recovery.img has been corrupted. I have no idea to get rid of this situation.
I planned to unlock my Mini's bootloader this weekend. After reading this post, I decided to act later until the root cause has been figured out.
bao_gg said:
I planned to unlock my Mini's bootloader this weekend. After reading this post, I decided to act later until the root cause has been figured out.
Click to expand...
Click to collapse
Several people myself included have been able to use tuliptool to successfully unlock and root the device.
mine is hard bricked too. but I think it is worse than the case listed on the op.
if you want to hard bricked these are the steps:
follow the procedure to install the Spanish ROM 6.1, than another android m b12, than finally the android seven......use tulip tool and install twpr fine, root ect. amazing ROM.......buuuuut......I lost my IMEI somewhere in this process, and the original FTM which had a small menu changes to another static one, without the menu.
I needed this menu to open the com port to fix the IMEI. than I had the brilliant idea to re-flash android M via twrp (without modifying the zip file to remove the recovery, something I knew so well from the older axon mini).
results:
-lost twpr because the stock ROM wrote over it,
-cannot boot the OS because I flashed android m but the phone had the aboot 7.
-i now have a brick
I need a genious to sujest something to bring it back to life........sh....t...sh...t.....sh...t
any chances I could inject aboot7 via ADB through my dead recovery which somehow the phone recognises? ADB shell still seems to be working
thanks
I am having some issues when its in download mode my pc shows alot of drives n asking me to format it n the downloder is not reading my phone n the fastboot is showing the remote error n adb doesnt detect my phone at all......i need helppp*
I tried installing the stock os several times before but my phone boots to the 'lenovo for those who do' part n then reboots....it reboots before even the logo completes......it booted once n there is no sound no readings for sim at all......I NEED SERIOUS HELP
:crying:
:crying:
:crying:
Which version os did you have when the phone got bricked? I suppose you have twrp installed. First try to wipe data partition in twrp and reboot.
If that won't work then try installing a custom rom same as the android version you had on your phone (for example, if you had marshmallow os the find a marshmallow custom rom).
You can also try the same with any latest stock firmware. Make sure it is a flashable zip.
Hope this helps.