Database Users

Rollback NXT-AL10 TO EMUI 6 ?

HI
can anyone help me to rollback my nxt-al10 to emui 6 please

drlsd said:
HI
can anyone help me to rollback my nxt-al10 to emui 6 please
Click to expand...
Click to collapse
Emui 6 ?? or maybe you want to say emui 4 and android 6 ??

Yes ,thank you very much ,i mean emiu 4.1 please

drlsd said:
Yes ,thank you very much ,i mean emiu 4.1 please
Click to expand...
Click to collapse
unlock & flash TWRP recovery & flash another firmware using TWRP
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146

I would like too to rollback my nxt-al10 from emui 5.0 (android 7.0) to emui 4.0 or 4.1.
Now my rom is nrd90m test-keys (AL10).
I read last post and I don't know how to unlock & flash TWRP recovery - before emui 5.0 I use SRKToolHuawei but now SRKTool don't support emui 5.0
Guys pleas help me.

bodzio3333 said:
I would like too to rollback my nxt-al10 from emui 5.0 (android 7.0) to emui 4.0 or 4.1.
Now my rom is nrd90m test-keys (AL10).
I read last post and I don't know how to unlock & flash TWRP recovery - before emui 5.0 I use SRKToolHuawei but now SRKTool don't support emui 5.0
Guys pleas help me.
Click to expand...
Click to collapse
If you're​ on nrd90m test key ,you can simply dload your last EMUI4 or 4.1 rom
Sent from my Huawei Mate 8 using Tapatalk

amin318 said:
If you're​ on nrd90m test key ,you can simply dload your last EMUI4 or 4.1 rom
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
I tried with dload method rom NXT-AL10C00B386 and while after boot in update I see that:
Software install failed!
Incomatibility with current version.
Please download the correct update package.
Please help

​
bodzio3333 said:
I tried with dload method rom NXT-AL10C00B386 and while after boot in update I see that:
Software install failed!
Incomatibility with current version.
Please download the correct update package.
Please help
Click to expand...
Click to collapse
Did you change your phone's cust version? If u changed it you should dload a firmware (4/4.1) that match with your new cust
I rolled back with this method dozen times when EMUI 5 was not officiall!
Sent from my Huawei Mate 8 using Tapatalk

amin318 said:
​
Did you change your phone's cust version? If u changed it you should dload a firmware (4/4.1) that match with your new cust
I rolled back with this method dozen times when EMUI 5 was not officiall!
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
No. this time my rom was stock I dload NXT-AL10C00B386, lost root and unlock bl and them do OTA to EMUI 5.0.
I realy don't know when I stuck od NRD90M. One time I pull the phone out of my pocket and see red message after reboot... that's all.
Hisute can't help me, I try.
Some advices, please.

bodzio3333 said:
No. this time my rom was stock I dload NXT-AL10C00B386, lost root and unlock bl and them do OTA to EMUI 5.0.
I realy don't know when I stuck od NRD90M. One time I pull the phone out of my pocket and see red message after reboot... that's all.
Hisute can't help me, I try.
Some advices, please.
Click to expand...
Click to collapse
Is that red message verification failed message?
If yes then please unlock the bootloader again even if it says unlocked. Then it will do factory reset and the red message will disappear.
You can then try to flash the stock firmware in TWRP. You can use B368 or B386 stock firmware from another thread and flash in TWRP. That is if you have TWRP. If you don't then unlock bootloader and then install TWRP using SRK tools. You can use SRK tools for adb commands also. Just type 000 on first page off srk tools and you will get into command prompt. Using that push the TWRP into your phone. ADB is very stable in srk tools and it will always identify your device. So that problem you won't have.
I couldn't find a proper rollback for AL10 . May be some one else can give if it is there for this model. If it was L29 model then rollback package is available and you can easily rollback using that in this type of situation.
If the flashing of stock ROM worked then you try to debrand your phone to L29 later. You will have many options then and L29 firmwares are more stable. I have AL10 which I debranded to L29 & I totally recommend debranding to C432 once your problem is solved
Do the above steps only if you are on marshmallow firmware.
Don't forget :good::good::good::good::good:

I created a al10 roll back for all al10 phones. It converts it to a DL0017 dual active sim. Message me for details how to obtain it from me .. MUST have twrp installed .

Samavb said:
Is that red message verification failed message?
If yes then please unlock the bootloader again even if it says unlocked. Then it will do factory reset and the red message will disappear.
You can then try to flash the stock firmware in TWRP. You can use B368 or B386 stock firmware from another thread and flash in TWRP. That is if you have TWRP. If you don't then unlock bootloader and then install TWRP using SRK tools. You can use SRK tools for adb commands also. Just type 000 on first page off srk tools and you will get into command prompt. Using that push the TWRP into your phone. ADB is very stable in srk tools and it will always identify your device. So that problem you won't have.
I couldn't find a proper rollback for AL10 . May be some one else can give if it is there for this model. If it was L29 model then rollback package is available and you can easily rollback using that in this type of situation.
If the flashing of stock ROM worked then you try to debrand your phone to L29 later. You will have many options then and L29 firmwares are more stable. I have AL10 which I debranded to L29 & I totally recommend debranding to C432 once your problem is solved
Do the above steps only if you are on marshmallow firmware.
Don't forget :good::good::good::good::good:
Click to expand...
Click to collapse
Thank you for help
Yes it is red message verification failed message.
I'll change AL10 to L29C432 when I can do that
The bigest problem is that I stuck on androit 7.0 emui 5.0.
So maybe you help me unlock bl (I have unlock code) and flash TWPR....

Unlock bootloader ADB commands + Stock + Debrand
bodzio3333 said:
Thank you for help
Yes it is red message verification failed message.
I'll change AL10 to L29C432 when I can do that
The bigest problem is that I stuck on androit 7.0 emui 5.0.
So maybe you help me unlock bl (I have unlock code) and flash TWPR....
Click to expand...
Click to collapse
If you want to unlock bootloader through ADB?
Here are the steps.
In your phone go to settings - >developer options - > put usb debubbing ON
switch off the phone.
Press and hold the down button for 3 seconds & then connect it to the computer
It will then go to fastboot mode.
then open SRK tools
type 000 to enter the command prompt.
Type the following command
fastboot oem unlock xxxxxxxxxxxxx
In this command xxxxxxxx is your bootloader code. just replace xxxxxxx with your code and press enter.
This will unlock your bootloader & will do a factory reset.
In SRK tools there is an option for bootloader unlock but I think that is only if you are in EMUI 4.0 or EMUI 4.1 that is what I think may be anyone else who tried this option in android 7.0 can confirm but the adb commands will work.
I have enclosed screenshots for better understanding.
you have mentioned that you are in Android 7.0
Can you tell me your exact firmware that you have on your phone at the moment?
After you get rid of that red message. Your bootloader is unlocked.
There is Erecovery process - > steps below (but there is a problem with this process)
1)Switch off the phone.
2) Press and hold the volume up button and then connect your phone to computer or charger. Yes charger. Then you can download stock firmware through your WIFI - > this will also install stock firmware. But I think this won't work because of unlocked bootloader
So once again install the TWRP for Android 7.0 I think it is Twrp 3.0.2 or Twrp 3.0.3 - > this is definitely for nougat.
ADB command to install twrp recovery is
fastboot flash recovery twrp.img ( rename the TWRP to twrp.img ) in the adb.
Try to flash the stock firmware zip files in TWRP.
Here you have two options - > You can either try flashing B386 files (only one zip file) or B562 (android 7.0 - > 2 zip files - first update.zip and then the other zip file)
If you are successful in this step then your TWRP will be overwritten with stock recovery.
That is ok. don't worry. Kangvip ROM is pre-rooted ROM. So you will get root in the end. For now its ok to be on Stock at this step.
Stock Recovery + Stock ROM + bootloader locked -> then you can dload back to EMU 4.1 using B386 firmware.
Then you can unlock bootloader (again) yes its a pain + followed by TWRP + ROOT - one after the other in SRK tools its all there. you can use the options in SRK tools this time.
And once you have root again.
Take backup and save it on your SD card. (except DATA , take backup of all options listed there, why? bcoz if you include data - > it will increase the backup size and it will take more time.
*Disclaimer* -> Very tricky & risky process - proceed with caution & full attention
Then - > you can debrand - > to C432 -(debranding is very tricky process, so keep your backup handy) This should be done very carefully because any problem here means you might find less space on your internal memory. Then you will have to restore that backup to get back your space.
Here is the link to excellent tutorial by somboons Watch it carefully.
https://www.youtube.com/watch?v=JZVsIKtdgV4
Just follow that as it is for debranding from AL10 to L29-C432
I am very very sorry for all these confusing and tricky steps. Please proceed with caution when you are doing the debranding process. Do not get diverted during that process.
Yes I did all this when I debranded my Huawei Mate 8 AL10 to L29. I had lot of anxious moments, doubts & my mind started playing tricks if mate 8 was dead on few occassions. But in the end my phone prevailed. Now I am happily using L29 - Kangvip B577. That is where I want you to land up in the end.
Do not worry and do not panic any time. Be prepared to face few challenges during this process. I will help you but please share your experience and follow the steps carefully.
During debranding you might have your phone rebooting or something might happen. That time do factory reset and continue from where you left off. If you get red message - > then you have to unlock bootloader. Otherwise continue.
This whole process will test your patience & consume time. So I hope you are willing to do this. Its worth it. I learnt my lesson, I am never buying chinese version of Huawei phones/tablets again. Only European models from now onwards.
Finally
Do not forget to click on :good::good::good::good::good::good::good:
I hope you understand.

I stared few hours ago.
First unlock bl - red message disapire
After bl I was error durind format bus system run witout any problem.
Then flash TWRP 3.1.0-2 and try to flash NXT-AL10C00B368-update.zip but I see this:
http://gofile.me/6tsPr/sHOJ4cLcr
http://gofile.me/6tsPr/cXniG4g8D
Some advices?

Options
bodzio3333 said:
I stared few hours ago.
First unlock bl - red message disapire
After bl I was error durind format bus system run witout any problem.
Then flash TWRP 3.1.0-2 and try to flash NXT-AL10C00B368-update.zip but I see this:
http://gofile.me/6tsPr/sHOJ4cLcr
http://gofile.me/6tsPr/cXniG4g8D
Some advices?
Click to expand...
Click to collapse
TWRP 3.1.0.2 is actually used for flashing nougat firmwares.
Which firmware are you on right now?
Are you on nougat or marshmallow? Please provide the full firmware build number.
if your phone is on marshmallow.
TWRP version depends on your firmware.
If you are on EMUI 4.0/4.1 then pls use the TWRP 3.0.2
you can use SRK tools to install that TWRP if you are on EMUI 4.0/EMUI 4.1
Install that version. Then
Factory reset
Flash the B386 zip file in TWRP.
You can get the B386 from here https://forum.xda-developers.com/showpost.php?p=69331930&postcount=1338
If your phone is on Android Nougat.
Then you have to use dload method.
Unzip the B386 zip file.
Put the update.app in the dload folder inside your external sdcard.
Go to your dialer
*#*#2846579#*#*
Select "software upgrade"
then Select - > SD card upgrade.
And then it will reboot and install the stock firmware.
This thread has all the Stock firmwares.
https://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
Hope the above steps solve your problem. If not, then we will try something else. please answer all the questions to help you better especially your full build number (firmware version).
:good::good::good::good::good:

Thank you
I'm on emui 5,0 android 7,0 nugat ROM nrd90m test-keys - before I don't remember, upgrade ota for AL10 model. Maybe AL10C00B552.
So I have to try flash nugat ROM AL10 by TWRP 3.1.0.2.
Dload method dont work - I never need sd card for this.
Can I flash nugat rom dload method? And where I find stock recovery for nugat?

TWRP & Erecovery methods
bodzio3333 said:
Thank you
I'm on emui 5,0 android 7,0 nugat ROM nrd90m test-keys - before I don't remember, upgrade ota for AL10 model. Maybe AL10C00B552.
So I have to try flash nugat ROM AL10 by TWRP 3.1.0.2.
Dload method dont work - I never need sd card for this.
Can I flash nugat rom dload method? And where I find stock recovery for nugat?
Click to expand...
Click to collapse
Since you are on nougat with test keys, try to flash the latest nougat firmware on your phone model NXT-AL10 (Try flashing firmwares using TWRP )
Link for the firmware
link 1 https://mega.nz/#!Y4IVEbxY!7C8u3FP3V8eAV4jVNmbRUfj2W1nc8p5gMtaScVmzeA0
if the link 1 doesn't work then try link 2
link 2 https://mega.nz/#!U9ZkTZzI!fbPnyDIxCGGFkiGxtF3SMicLqmTDNTq8SG8fVw8lfz8
download & flash it using TWRP.
Once you finish flashing - you should have android nougat stock B584
Go to settings - > about you should see that B584. in build number.
If your build number is showing anything other than test-keys then you will be able to use dload method or Hisuite method using PC.
Now if IT IS showing B584, then you can dload to B386. then unlock bootloader -> TWRP using SRK tools - > Root - > and then debrand to L29C432. - > this is the road map for you. we will go through this only after you succeed in the above steps.
Try the below steps only if the above steps don't work
if you want to flash the nougat recovery
then unzip the zip file in link 1.
Use Huawei update extractor software HuaweiUpdateExtractor_0.9.9.3
and then extract the recovery.img from the update.app file.
now
switch on usb debugging in your settings.
switch off the phone
press & hold volume down and then connect to phone to laptop
put the extracted recovery.img file in the same folder as the SRK tools
open SRK tools
type 000 to enter command prompt
type fastboot flash recovery recovery.img
(please remember all these steps that use adb commands come with element of risk. so please proceed with caution and go slow. Proceed with these steps only if you know what you are doing otherwise do not proceed)
Try the TWRP steps first and see if that will resolve your issue before flashing any stock recovery. If your flashing through TWRP then it will install stock recovery & stock ROM.
Please share your progress.
:good::good:

Samavb said:
Since you are on nougat with test keys, try to flash the latest nougat firmware on your phone model NXT-AL10 (Try flashing firmwares using TWRP )
Link for the firmware
link 1 https://mega.nz/#!Y4IVEbxY!7C8u3FP3V8eAV4jVNmbRUfj2W1nc8p5gMtaScVmzeA0
if the link 1 doesn't work then try link 2
link 2 https://mega.nz/#!U9ZkTZzI!fbPnyDIxCGGFkiGxtF3SMicLqmTDNTq8SG8fVw8lfz8
download & flash it using TWRP.
Once you finish flashing - you should have android nougat stock B584
Click to expand...
Click to collapse
You must know that I'm very grateful for your help
Do I have to format data before start flashing B584.zip or do nothing?
Do I need update_data_full_all_cn.zip ?

2 Answers
bodzio3333 said:
You must know that I'm very grateful for your help
Do I have to format data before start flashing B584.zip or do nothing?
Do I need update_data_full_all_cn.zip ?
Click to expand...
Click to collapse
Glad to read Ur kind words but V have a long road ahead. So let's fix ur phone :good:
Answers
1) Yes, you can format DATA before flashing this zip file. you can also do factory reset before flashing the zip file. (Remember we are doing this step only to get ur phone out of that test keys & this firmware is not ur final firmware that u will use. )
2) I was searching for a firmware that u can flash on ur phone and I found B584 and felt this might help. The guys in the other thread mentioned it as full firmware. After u flash this firmware, check in settings - > about - > build number if it is anything else other than test keys then u succeeded in this step.
Goal of this flashing of B584 is only to get rid of that test keys in build number. Once that is gone then U can downgrade to B386 using steps in my previous posts followed by the road map.
:good::good::good:

Samavb said:
Glad to read Ur kind words but V have a long road ahead. So let's fix ur phone :good:
Answers
1) Yes, you can format DATA before flashing this zip file. you can also do factory reset before flashing the zip file. (Remember we are doing this step only to get ur phone out of that test keys & this firmware is not ur final firmware that u will use. )
2) I was searching for a firmware that u can flash on ur phone and I found B584 and felt this might help. The guys in the other thread mentioned it as full firmware. After u flash this firmware, check in settings - > about - > build number if it is anything else other than test keys then u succeeded in this step.
Goal of this flashing of B584 is only to get rid of that test keys in build number. Once that is gone then U can downgrade to B386 using steps in my previous posts followed by the road map.
:good::good::good:
Click to expand...
Click to collapse
When I flash B584.zip see this error in twrp:
Failed to mount '/cust' (invalid argument)
Failed to mount '/version' (invalid argument)
E:unknown command [errno]
E:unknown command [errno]
Update process ended with ERROR: 7
No good.....

HUAWEI P9 LITE NRD90M(test-keys) TO MM HELP Urgent

Plzzz help im stuck I want to rollback my huawei p9 lite VNS-L31 where its build number is NRD90M(test keys) to marshmallow 6.0 help don't know what to do . Plz if you can explain step by step what can i do because i'm not good in these things , My bluetooth not workng , there no calculator , no software updater , i am not able to check if got update or not and so on......, im stuck plz help

Well hey.. first download this rollback package from this link:
http://download-c1.huawei.com/download/downloadCenter?downloadId=93645&version=371484&siteCode=np
Extract and move all the files to dload folder on your external SD Card then install it with the 3 button method. If there's no dload folder then create one.
So the phone will reboot and now you can downgrade to any mm rom
Now just download this mm rom from this link:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66015/f1/full/update.zip
And again extract and move the files to dload folder on your sd card.. Install with 3 button method.
Done! Everything should work now!
In case If you don't know what the 3 button method is..lol
•Power the phone off ?
•Just press and hold on POWER + VOLUME UP + VOLUME DOWN buttons
The phone will start installing the rom and that's the 3 button method ?❤

this is not working for me. it says incompatibility with current version and to download the correct version.

lennie27 said:
this is not working for me. it says incompatibility with current version and to download the correct version.
Click to expand...
Click to collapse
Man, you have to do entire procedure: unlock bootloader, install twrp for Nougat and flash oeminfo for your phone. Before that you have to put in dload folder MM firmware (B130/B131),
because after flashing oeminfo phone try to repair firmware from dload folder. If repair do not start, power off phone and power on with 3 keys combination.

Hi All,
I'm having a similar issue as lennie27 however I think I might have strayed down an incorrect path during the process of upgrading to Nougat. My device shipped with VNS-L31C16B120 with no updates available through the stock updater. I tried the Firmware Finder guides which listed options for VNS-L31C169B13x and VNS-L31C432B13x however none of these updates would work, updater would say it's incompatible with current version. I also tried manually downloading the VNS-L31C432B160 firmware and installing that with the 3 button method as well as the EngineerMenu option with the same result (found guides that stated needing to be on B160 or B161 before making the jump to Nougat). Eventually I decided to unlock the bootloader and install Nougat through TWRP and followed the obeygeekupdate-huawei-p9-lite-to-android-7-0-nougat-manually guide (can't post links ) on manually installing Nougat (stupidly never paying attention to the fact that it's a beta build guide). I've installed TWRP to the device again using the P9 Lite Toolkit v0.0.0.11 found here on XDA (used this when on MM however the upgrade seemed to restore the stock recovery) with the idea of downloading the build from the ministryofsolutions huawei-p9-lite-vns-l31-nougat-b371-update-stable-europe page and pushing that to the device instead (however now the device doesn't want to boot into recovery)
Now my only concern is, will this work? I've noticed a bit of commenting going back and forth on the ministryofsolutions site which essentially boiled down to the need for debranding the phone (apparently C19 is MTN South Africa specific and I need to debrand it and get it onto C432 Europe before mucking about with Nougat, but alas to late) which seemed to be something I should have done while on MM still. If I can find a full firmware link for VNS-L31C16B120 can I flash that through TWRP without needing to follow any prerequisite steps? So far nothing that I've tried to flash using the three button method has worked, I'd just like to get back onto an official stable firmware again.
Any advice will be appreciated

saintnite said:
Hi All,
I'm having a similar issue as lennie27 however I think I might have strayed down an incorrect path during the process of upgrading to Nougat. My device shipped with VNS-L31C16B120 with no updates available through the stock updater. I tried the Firmware Finder guides which listed options for VNS-L31C169B13x and VNS-L31C432B13x however none of these updates would work, updater would say it's incompatible with current version. I also tried manually downloading the VNS-L31C432B160 firmware and installing that with the 3 button method as well as the EngineerMenu option with the same result (found guides that stated needing to be on B160 or B161 before making the jump to Nougat). Eventually I decided to unlock the bootloader and install Nougat through TWRP and followed the obeygeekupdate-huawei-p9-lite-to-android-7-0-nougat-manually guide (can't post links ) on manually installing Nougat (stupidly never paying attention to the fact that it's a beta build guide). I've installed TWRP to the device again using the P9 Lite Toolkit v0.0.0.11 found here on XDA (used this when on MM however the upgrade seemed to restore the stock recovery) with the idea of downloading the build from the ministryofsolutions huawei-p9-lite-vns-l31-nougat-b371-update-stable-europe page and pushing that to the device instead (however now the device doesn't want to boot into recovery)
Now my only concern is, will this work? I've noticed a bit of commenting going back and forth on the ministryofsolutions site which essentially boiled down to the need for debranding the phone (apparently C19 is MTN South Africa specific and I need to debrand it and get it onto C432 Europe before mucking about with Nougat, but alas to late) which seemed to be something I should have done while on MM still. If I can find a full firmware link for VNS-L31C16B120 can I flash that through TWRP without needing to follow any prerequisite steps? So far nothing that I've tried to flash using the three button method has worked, I'd just like to get back onto an official stable firmware again.
Any advice will be appreciated
Click to expand...
Click to collapse
you need to install nougat recovery, not the one from the toolkit. then twrp will work and the device will boot.
to go back to 120 you need to install oeminfo, and then the update.app

mjz2cool said:
you need to install nougat recovery, not the one from the toolkit. then twrp will work and the device will boot.
to go back to 120 you need to install oeminfo, and then the update.app
Click to expand...
Click to collapse
Thank you for the reply, managed to come right a few hours after posting. Turned out the copy of TWRP that I had on hand was more outdated than I thought, downloaded the newest copy and that worked on the device. Additionally I managed to find a website listing just about every firmware for the phone (Including my original MTN ZA specific variant) so I downloaded that and managed to restore the phone using the three button method. Phone is back to stock now and even the unlocked bootloader nag screen is gone so I'm guessing the bootloader is locked again as well One day when I'm brave enough to attempt this again I'll look at debranding the phone and getting it onto a C432 based ROM before getting it onto Nougat again.

phone bricked
hello guys! im currently on lineage os 14.1 by meticulus, i wanna revert back to stock mm but i cant. i flashed the custom rom from mm using twrp recovery by meticulus, but now i cant even boot into erecovery! can you pls help me!:crying: DLOAD method doesnt work!

Installing Resurrection Remix on Build A2017GV1.2.0B01

Hi there, I am looking to root my Axon 7 A2017G and install Resurrection Remix. I have only rooted Oneplus devices before so was looking for some help in the process. I understand that it involves unlocking the bootloader then installing TWRP which can then be used to flash the rom. Firstly it seems from this guide: https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379 that I will have to downgrade to marshmallow first in which case will the default MiFavor Updater detect the update if I simply downloader this one say: http://www.stechguide.com/download-b03-update-for-zte-axon-7-a2017geurope/ and place it in the root of the sdcard? Or will I have to flash that downgrade with the stock recovery?
Secondly in the package my device came in (ordered off AliExpress) it had a note that said this device couldn't be rooted as they had installed their own software, the only possible indication of this however is that the recovery is in chinese(?), I have included a picture. Should I be concerned about this?
Annnnd I can't actually think of a thirdly so thirdly just thanks for any help
Luke

It is just as simple as it can be:
Read and use the following thread:
https://forum.xda-developers.com/showthread.php?t=3573108

lukeshields said:
Hi there, I am looking to root my Axon 7 A2017G and install Resurrection Remix. I have only rooted Oneplus devices before so was looking for some help in the process. I understand that it involves unlocking the bootloader then installing TWRP which can then be used to flash the rom. Firstly it seems from this guide: https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379 that I will have to downgrade to marshmallow first in which case will the default MiFavor Updater detect the update if I simply downloader this one say: http://www.stechguide.com/download-b03-update-for-zte-axon-7-a2017geurope/ and place it in the root of the sdcard? Or will I have to flash that downgrade with the stock recovery?
Secondly in the package my device came in (ordered off AliExpress) it had a note that said this device couldn't be rooted as they had installed their own software, the only possible indication of this however is that the recovery is in chinese(?), I have included a picture. Should I be concerned about this?
Annnnd I can't actually think of a thirdly so thirdly just thanks for any help
Luke
Click to expand...
Click to collapse
No. Your phone is NOT an A2017G, it is an A2017!!! Be VERY careful! Why do you think they say that you can't root? for giggles? Look in the back of the phone, it should say the model. You will need to follow guides for the A2017, but I recommend that you download the latest official A2017 update zip, unpack it if needed (if you open the zip you downloaded and there's a PDF and an update.zip, take the update.zip), then take the update.zip and throw it in the root of the internal storage, otherwise throw the zip you downloaded if there's no update.zip. Then go to Update and update.
After that you'll have official A2017 firmware and you can use the guides

help me please with my huawie mate 9 pro

maybe am posting in the wrong thread, but guys i need your help
first of all i download oreoo firmware with 3 updates files by mistake i did not backup my firmware by twrp
and i wiped the system and cash .
now my phone for sure is not booting. sure huawie mate 9 pro has not sd card so i tried to use otg usb connection
. i tried to connect my phone to pc to use adb slideload but driver is not recognized.....................
some one help me if there is any tool can flash the original stock rom

[stock rom latest version instalition guide] Honor 8 LRD-F09

Hello all you confused people!
I was at the same situation myself without having a backup after i bricked my honor 8.
I looked everywhere but i couldn't seem to find the latest firmware with a simple and easy instalition guide.
Basically all you have to do is flash the old rom version and then update your phone through HiSuite.
Things you are going to need:
A SDCard
Your device
The firmware of your region which you are going to get through the post i will link. Thanks a lot @DigiGoon
And last your pc with hisuite installed.
1)So download the firmware according to your device.
2)unzip it and you will have a folder named "dload"
3)take the folder with its contents and paste it to your SDCard
4)place the sdcard to your phone
5)Power your phone off if it isn't powered of already
6)press the volume up and down button and then press the power button(all at the same time!!!)
7)the phone will install the update package(firmware)by itself.after that its going to reboot
8)Then connect your phone with the computer and press update on Hisuite.it will download and install a full update.
9)after that update from the phones ota and you succesfully have your device like brand new out of the box.
if this helped you in any way press thanks if you are kind enough
thanks to @DigiGoon again for providing the firmware,feel free to ask me anything in the comments.

GerasxD said:
Hello all you confused people!
I was at the same situation myself without having a backup after i bricked my honor 8.
I looked everywhere but i couldn't seem to find the latest firmware with a simple and easy instalition guide.
Basically all you have to do is flash the old rom version and then update your phone through HiSuite.
Things you are going to need:
A SDCard
Your device
The firmware of your region which you are going to get through the post i will link. Thanks a lot @DigiGoon
And last your pc with hisuite installed.
1)So download the firmware according to your device.
2)unzip it and you will have a folder named "dload"
3)take the folder with its contents and paste it to your SDCard
4)place the sdcard to your phone
5)Power your phone off if it isn't powered of already
6)press the volume up and down button and then press the power button(all at the same time!!!)
7)the phone will install the update package(firmware)by itself.after that its going to reboot
8)Then connect your phone with the computer and press update on Hisuite.it will download and install a full update.
9)after that update from the phones ota and you succesfully have your device like brand new out of the box.
if this helped you in any way press thanks if you are kind enough
thanks to @DigiGoon again for providing the firmware,feel free to ask me anything in the comments.
Click to expand...
Click to collapse
Will this work on an unlocked bootloader?

h4cker90 said:
Will this work on an unlocked bootloader?
Click to expand...
Click to collapse
Yes, installation via dload method will work with locked bl and will likely relock your bootloader. And it's better to make a factory reset through recovery after installation and boot it up once before you update in next step.
About update via HiSuite, idk if this needs a locked BL.
Sent from my FRD-L09 using XDA Labs

Can I use this to update to EMUI 8 on FRD L04?

Blackherted said:
Can I use this to update to EMUI 8 on FRD L04?
Click to expand...
Click to collapse
yes you can do it in any firmware you are currently.

can i use this methode when i have a coustom recovery and an open bootloader?
I have android 6.0 and i want to install Oreo and later on rros.
Or is there a easier version to install oreo? Because my phone isnt bricked.

Palindrom87 said:
can i use this methode when i have a coustom recovery and an open bootloader?
I have android 6.0 and i want to install Oreo and later on rros.
Or is there a easier version to install oreo? Because my phone isnt bricked.
Click to expand...
Click to collapse
You'd be able to update to nougat, go to B412, update to Oreo via HiSuite and than flash RROS. All these passages surely will delete all your datas and lock your device back.

Hello there,
Thanks for the guide but where is the link to the firmwares?
I'm on the latest Oreo with unlocked bootloader and I wish to do that to relock my bootloader...

I tried this guide but doesnt work for me.. Once i reboot with three finger, after reach 5% recovery say me update failed
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

Please help
Thanks help, my honor 8 frd-l09 broke down, constantly lost signal from network operator, so I bought on eBay a board supposedly would be the same but the seller lied, the board had Chinese firmware, after searching here on the site I followed a tutorial to rebrand from frd-al00 to frd-l09, everything was perfect, until updates started to arrive on the phone and I accepted, the third update occurred an error and the phone no longer started, to make it worse i tried to install another rom Now I have a brick.