Hi all, i have the Samsung SM-G935F model and i wiped and factory reset via recovery mode and now i am getting the following message on my device;
'An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software'.
I opened the Smart Switch software on my PC and selected the 'Emergency Software Recovery' option where it now asks for me to enter a recovery code from the previous PC to run emergency recovery, and here lies my issue. I do not have a recovery code from a previous PC so how do i get one or repair this device without one, if possible.
Related
I have a rooted device and I have formated all partitions and wanted to install the following new factory rom:
N9005ZTUENE2_N9005ZZTENE2_N9005ZTUENE2_HOME
While falshing the rom with ODIN 3,0,7 error appears - error to write ext4 - I have tried several times and the same results.
Reactivation lock is off.
It is not possible to enter recovery mode and it is only possible to enter download mode.
I recive the following errro:
"irmware upgrade encountered an issue. Please select recovery mode in kies & try again"
When I connect to kies, kies trying to connect and nothing happende
Please advice
I manage to fix it - by flash N9005XXUEND3_N9005OLBENC3_N9005XXUENC2_HOME
Update: [SOLVED]
Thanks GOD .. Kies Emergency Firmware Upgrade Solved it. Same Smart Switch Method.
Help Me please. I flashed TWRP to my SM-G935FD with odin preparing to root it.
But i found the internal storage is 0 bytes.
so i can't find zip file to flash supersu or mount storage to PC.
i found a solution, it was by changing file system and go back to original file system.
i tried this, i changed it. it typed Done. but nothing shows of back or home softkeys of TWRP.
So i restart my device to TWRP again but it freeze in splash screen.
I tried Smart Switch it give me message that it can't recognize my device.
Odin give me FAILED (DeviceInfo).
Any Solution? or My Device is dead now?
When using Samsung SmartSwitch it is normal that it says it does not recognize the device after you have tried to root it and failed.
You need to put the phone in download mode and use the "Emergency Software Recovery and initialization" in the Smartswitch software. You will be asked to input your model number and the serial number. It will then return it to stock.
You do so at your own peril.
so my Galaxy Grand prime was stuck at boot Logo. I tried to flash it using Odin with a Firmware from Sammobile and it failed in the process.
Now I can't go into download mode. The error reads:
" AN ERROR HAS OCCURRED WHILE UPDATING THE SOFTWARE. USE THE EMERGENCY RECOVERY FUNCTION IN THE SMART SWITCH PC SOFTWARE"
I downloaded Kies and it says:
" THE CONNECTED DEVICE IS NOT SUPPORTED BY KIES. IF AN ERROR Has OCCURRED WHILE UPDATING THE FIRMWARE USE THE FIRMWARE EMERGENCY RECOVERY MODE"
so when I tried firmware emergency recovery mode it asks for model and S/N number. which keis rejects by saying it is not correct. Also, the device does not show up in the space where devices which need software update appears.
Any ideas ?:crying:
@ahsanali32
https://forums.androidcentral.com/t-mobile-galaxy-s-ii/302811-cant-boot-into-download-mode.html
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Look at these website.....
I tried following:
1. Flash by Odin. (then Failed)
2. an error has occurred while updating the device software. use the emergency recovery function
3. Android recovery is no more appearing.
4. Tried Samsung smart switch device initialization. Given Model no. and S/N number.
5. Then Not found in database problem.
What else can I do to recover the phone?
Remove the Google account first (which means you'll need the password).
I was flashing a firmware with Odin on SM-T725 (it's not first time) and error occurred. Now i have a problem because also if i start tablet with + and - volume and put usb cable in it , it start in download mode but after 5 second it reboot. It goes in bootloop on error "An error has occurred while updating th device software . Use the emergency recovery function in smart switch pc software". The problem is that is i start to flash again wigth odin it start but in 5/6 second it reboot. I really don't know how to flash again if it always start to reboot!