I was flashing a firmware with Odin on SM-T725 (it's not first time) and error occurred. Now i have a problem because also if i start tablet with + and - volume and put usb cable in it , it start in download mode but after 5 second it reboot. It goes in bootloop on error "An error has occurred while updating th device software . Use the emergency recovery function in smart switch pc software". The problem is that is i start to flash again wigth odin it start but in 5/6 second it reboot. I really don't know how to flash again if it always start to reboot!
Related
I have a rooted device and I have formated all partitions and wanted to install the following new factory rom:
N9005ZTUENE2_N9005ZZTENE2_N9005ZTUENE2_HOME
While falshing the rom with ODIN 3,0,7 error appears - error to write ext4 - I have tried several times and the same results.
Reactivation lock is off.
It is not possible to enter recovery mode and it is only possible to enter download mode.
I recive the following errro:
"irmware upgrade encountered an issue. Please select recovery mode in kies & try again"
When I connect to kies, kies trying to connect and nothing happende
Please advice
I manage to fix it - by flash N9005XXUEND3_N9005OLBENC3_N9005XXUENC2_HOME
Hello everyone !
I have big troubles with my Lg g2 d802.
Yesterday i want to intall crdroid 5.0 on my Lg g2 on Official 4.4.2, so i've:
Root my phone
Install CWM Manager
Set CWM Recovery
Reboot in recovery
Use ADB Mode
Use ADB on my PC to send crDroid zip by sideload
During sideload, after full download, there was an error assert failed. So installation failed, and i've decided to reboot my phone.
Problem is here, my phone boot, display LG Logo and after 5 seconds, Lg Logo with "security error" message, then stop alone and reboot again, and again.
I have tried following procedures :
Power off completely my phone and then Volume down+PWR to enter in recovery : FAIL
Volume Up and then put USB cable to enter download mode : FAIL
Connect with USB on Ubuntu to try to reset .img files : FAIL (Phone invisible on my pc, even not recognize)
So i cannot go to Recovery Mode, Download Mode and my phone isn't recognize on PC.
I don't have any other ideas and i am here to asking help .
Thxs for reading, and i pray for a miracle !
Wallouf said:
Hello everyone !
I have big troubles with my Lg g2 d802.
Yesterday i want to intall crdroid 5.0 on my Lg g2 on Official 4.4.2, so i've:
Root my phone
Install CWM Manager
Set CWM Recovery
Reboot in recovery
Use ADB Mode
Use ADB on my PC to send crDroid zip by sideload
During sideload, after full download, there was an error assert failed. So installation failed, and i've decided to reboot my phone.
Problem is here, my phone boot, display LG Logo and after 5 seconds, Lg Logo with "security error" message, then stop alone and reboot again, and again.
I have tried following procedures :
Power off completely my phone and then Volume down+PWR to enter in recovery : FAIL
Volume Up and then put USB cable to enter download mode : FAIL
Connect with USB on Ubuntu to try to reset .img files : FAIL (Phone invisible on my pc, even not recognize)
So i cannot go to Recovery Mode, Download Mode and my phone isn't recognize on PC.
I don't have any other ideas and i am here to asking help .
Thxs for reading, and i pray for a miracle !
Click to expand...
Click to collapse
Even I have suffered with same problem
Follow this thread I think you must have seen this thread it is the best solution till date from recovering the problem you are in right now.
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
But you have to mess up with your phone motherboard but its really very easy. Just follow it. I have recovered mine from this.
Ok i'll Try it ! Thx you !
I have tried your link and its working. My phone is alive ! Thx you .
I have a last problem. My phone has 2 black lines on the screen from top to bottom. This appear after i had flash new .img files. Does anyone have an idea about what i need to do to remove these ?
Thx you again
HI XDA,
I am using Galaxy Note 4 (SM-N910G)
1st STAGE
Suddenly in my phone's recovery menu says "drk verification failed",
If i install firmware vis Kies or ODIN it says"write flash memory failed"
2nd STAGE
I flash new Firmware and PIT file(get from some web) via ODIN3_v1.85.
But phone was not worked properly.
When i open recovery boot menu it says"Installing System updates"(5 min)
then after select "wiping menu" or "reboot" it takes 10 min.
3rd STAGE
I flash via Smart switch Emergency Recovery mode but it says above errors.(But it working properly compered to above condition but have same errors)
4th stage
I flash official ROM(AP) and Boot Loader(BL) vis ODIN3_v3.11.
Started properly but same screen says"Installing system updates" and all that.
Sometimes says "NO COMMAND" for a bit sec and goes to recovery menu.
Note: Phone is not rooted
What should i do to solve this issue?
I think that may issue again rise from PIT file?(It seems partition line in recovery menu)
is there any way to remove partition made by PIT file?
What should happen if i check "re-partition"(Not given PIT file) or "Nand Erase All" while flashing with ODIN?
I have BL,AP,CP,CSC for that phone.
Thanks in advance.
Earlier it was running on custom rom then i tried to install stock rom on my device moto g4 plus...nd i successfully installed it....later an update came and as soon as phone dowoaded update nd gone to reboot doesn't turn on after that...nothing of the screen ..only charging led blinking .....nd today i tried to do blankflash nd it was successful nd something showed up on the screen for the first time
it has these options :
start
restart bootloader
recovery mode
power off
factory
barcodes
bp tools
qcom
bootloader logs
switch tools mode
when i select recovery mode..it shows up this:
------------------------------------------------------------------
Startup failed :
your device didnt start up succesfully.
use the software repair assistant on computer to repair your device.
Ap Fastboot Mode(secure)
Fastboot Reason: Failed to intialise storage partition table
ERROR : No bootaimage found . skip to fastboot
boot up failed.
---------------------------------------------------------------------
please help me through this...i want to install stock android on my phone
Try this guide https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Your device's memory seems to be corrupted, so it doesn't recognize a recovery being present. As pointed out above, go back to Fastboot, and install the latest stock ROM.
Days ago , i had an invalid boot image problem when i try to flash lineage os.Then i wiped internal storage and fix mount /data errors.But because of image file somehow my phone model and brand is changed.Then i discovered QFIL and use a solution from here for fix everything.It fixed everything but my phone was in Factory Mode.I tried an file i found on internet for fix and i flashed it with QFIL.But my device not open and i tried to flash qfil and qcn file again.It gives me error every time and i selected erase all before download.But 30 minutes after i press download my pc battery get low and turned off.
Now when i connect my device it says "USB device is not recognized.The last USB device you connected to this computer has malfunctioned and windows doesn't recognize it" . I tried change value of ErrorControl of USBSTOR in regedit but i cant find usbstor.inf in system32 after i did it.Now i have a phone with no vibration , no fastboot ,no recovery, no boot or edl.I tried edl points over and over again and i tried re-install drivers too.I cant see anything cause my phone cant boot.
My Device =Asus Zenfone Max (ZC500KL/ZO10D with Snapdragon 410)
ROM: Stock rom with Factory Mode
QFIL Port : No port (It didn't recognize )
Device Manager : unknown usb device (device descriptor request failed)
Error Code: A request for the USB device descriptor failed. CODE 43
Note:Sorry for my bad English.Please help
I press power button 10 sec and pc can't detect it but qfil can.So i tried again.But it gives me sahara error everytime
I am giving port traces and log files in below