so my Galaxy Grand prime was stuck at boot Logo. I tried to flash it using Odin with a Firmware from Sammobile and it failed in the process.
Now I can't go into download mode. The error reads:
" AN ERROR HAS OCCURRED WHILE UPDATING THE SOFTWARE. USE THE EMERGENCY RECOVERY FUNCTION IN THE SMART SWITCH PC SOFTWARE"
I downloaded Kies and it says:
" THE CONNECTED DEVICE IS NOT SUPPORTED BY KIES. IF AN ERROR Has OCCURRED WHILE UPDATING THE FIRMWARE USE THE FIRMWARE EMERGENCY RECOVERY MODE"
so when I tried firmware emergency recovery mode it asks for model and S/N number. which keis rejects by saying it is not correct. Also, the device does not show up in the space where devices which need software update appears.
Any ideas ?:crying:
@ahsanali32
https://forums.androidcentral.com/t-mobile-galaxy-s-ii/302811-cant-boot-into-download-mode.html
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Look at these website.....
Related
I have a i9505 that i decided to CF-AutoRoot using Odin, while flashing i got a "Complete(Write) operation failed".
Now I cant open it because I get a "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again".
Opened Kies couldnt recognise it. Any idead what to do next? I believe I was running on XXUBMF8 official stock rom
Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again
http://i.imgur.com/0S1BJnx.jpg
and
Odin Error
http://imgur.com/9vN8JFX
Can you get into download mode? If you can, plug it in and try rooting again. I believe you are not supposed to run Kies when you are in the middle of rooting though...
Sent from my GT-I9505 using Tapatalk 4
So here's a run down of what has happened:
1) My phone prompts me to upgrade to 4.3
2) Following the update, the phone boots but is unresponsive; (just keeps on saying that app has crashed)
3) Tried to go into recovery mode, but it didn't
4) Used the Kies Emergency Firmware Upgrade method but it stopped and said that an error has occured
5) Now my phone is in a state where booting brings me to an error message that says "Firmware Upgrade encountered an issue. Please select recovery mode in Kies and try again"
I have already tried to use Odin to flash a stock rom onto it several times already. I used both 3.04 and 3.07 versions with the 4.22 ser and 4.3 ser roms and they have all failed at Nand write or Can't open the serial(COM) port. or etc.
I've been browsing the forums for a day now and no help. Do you guys have any suggestions?
(I can still enter download mode.)
Bump.
Does anyone have any alternative methods other than flashing stock with Odin until it works? I'm just getting fail messages
My phone is stuck on firmware on "upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried Kies 3 and it doesn't recognise the phone. i have tried different stock firmware via odin. but all fails. need help..................
mkhurrambwp said:
My phone is stuck on firmware on "upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried Kies 3 and it doesn't recognise the phone. i have tried different stock firmware via odin. but all fails. need help..................
Click to expand...
Click to collapse
you cant :
1 - open kies 3
2- chose Tools ---> Firmwere upgrade and initialisation
3 - Enter Model name your phone SM-N910L
4 - Enter S/N and wait
hey guys im sorry if i post this on the wrong section but i followed this tutorial: droidviews(dot)com/root-galaxy-s6-and-s6-edge-on-android-6-0-1-marshmallow-update/ to root my s6 edge+ and it went black... after some research i found out the tutorial wasnt for my device(SM-G2928F) so i flashed it with cf-autoroot and then it boot looped for like an hour. I downloaded the original greek firmware from sammobile but it brings me up this error: SECURE CHECK FAIL : (BOOTLOADER).. any help?
UPDATE: changed the port and run Odin as admin now it says: SECURE CHECK FAIL : (RADIO) Odin log: pastebin(dot)com/4w1943HF
UPDATE: now when I exit recovery mode it doesnt start and tells me: An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.(I can still go into recovery mode)
Let me check you have flashed a firmware not for your device with odin or just a zip? First I would try flashing the most recent firmware you can find for your device with odin, some bootloaders can't be downgraded. If that doesn't work then the emergency firmware recovery will work, I've used kies emergency firmware a few times.
Hopefully someone with your device will point you in the right direction if you are stuck
I flashed a firmware not for my device but I found a solution on another XDA post thank you
I have an SM-T280 that I've been trying to put LineageOS on, so I can use my MicroSD card as app storage. I downloaded TWRP Recovery, used Heimdall to transfer it over... DISASTER! Heimdall says:
Code:
Downloading device's PIT file...
PIT file download successful.
Uploading RECOVERY
100%
RECOVERY upload successful
Ending session...
ERROR: Failed to receive session end confirmation!
Releasing device interface...
And on the screen of the tablet itself, "Custom Binary(Recovery) Blocked by FRP Lock". Now my phone is stuck in Odin Download Mode (won't turn on or off), I can't find the stock firmware because I don't have the CSC code, and worst of all, Heimdall won't even connect to the tablet anymore. It gives me this error:
Code:
Initialising protocol...
ERROR: Protocol initialisation failed!
Anyone got any ideas?
nickmatavka said:
I have an SM-T280 that I've been trying to put LineageOS on, so I can use my MicroSD card as app storage. I downloaded TWRP Recovery, used Heimdall to transfer it over... DISASTER! Heimdall says:
And on the screen of the tablet itself, "Custom Binary(Recovery) Blocked by FRP Lock". Now my phone is stuck in Odin Download Mode (won't turn on or off), I can't find the stock firmware because I don't have the CSC code, and worst of all, Heimdall won't even connect to the tablet anymore. It gives me this error:
Anyone got any ideas?
Click to expand...
Click to collapse
Just reboot to download mode (before you say you can't, I guarantee you can) then either just install the stock recovery or the whole firmware.
Boot to the OS and enable OEM_UNLOCK.
I suggest in future you read the installation instructions properly.
@OP
Whats the update? Did you manage to install LigeageOS?
I have the same device and want to install another OS for the same reason.
Did you have any luck installing another OS?