Database Users

Charging/Stereo Cable?

Just a quick question.
Is there a cable that allows you to charge the Kaiser/Tilt and also take the audio from the mini usb and have it go to a 1/8 in mini female? This would allow me to have my phone charge while being able to plug an audio cable to my car radio and listen to music while charging. Is something like this even possible?

I picked up one of these. It allows you to charge and use a regular 3.5mm headphone at the same time.
I considered this OEM version but went for the cheaper one linked above.
-Brett.

zzoinks said:
I picked up one of these. It allows you to charge and use a regular 3.5mm headphone at the same time.
I considered this OEM version but went for the cheaper one linked above.
-Brett.
Click to expand...
Click to collapse
Thanks for this.
I just ordered one too. I've got the standard one -- but alas watching videos my device is dead in no time without charger input.

zzoinks said:
I picked up one of these. It allows you to charge and use a regular 3.5mm headphone at the same time.
I considered this OEM version but went for the cheaper one linked above.
-Brett.
Click to expand...
Click to collapse
Brett,
Thank you. That is exactly what I was looking for.

Charging/Stereo Cable
Thanks just what I was looking for....I'm surprised that I didn't have to pay extra for the charger....from AT&T!
Question: Does any USB cable work with the Tilt?

Stop off at your local verizon store and pick up the OEM HTC headphone/usb adaptor cable for the Verizon XV6800. The adaptor is universal for the current generation HTC devices with 11 pin port. Its listed online, and should be available in most stores. Price is $19.99 +tax, which really isnt that bad for an OEM part. Even has the spiffy little HTC logo embossed on the handset end of the adaptor.
Heres the direct link, copy/paste it, youll get an error page, just click accessories and enter your zip code and click enter, then re-paste this in your address bar and hit enter, and the page will come up. No clue why it doesnt just open on the first try without a zip code since its online.
http://www.verizonwireless.com/b2c/store/accessoryPopup?item=accessoryMart&accessoryId=31462
Also, yes, any A to mini-A usb cable will connect your device to your pc.

Sorry I didn't see this sooner, but I got this one
It does ship from Hong Kong, so it takes a few weeks, but it's totally worth it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lets you charge, have a set of USB headphones or the classic headphone jack all at once.
I recommend this to everyone. $17 + around $6 shipping = Well spent $25.

pball3485 said:
Sorry I didn't see this sooner, but I got this one
It does ship from Hong Kong, so it takes a few weeks, but it's totally worth it.
Lets you charge, have a set of USB headphones or the classic headphone jack all at once.
I recommend this to everyone. $17 + around $6 shipping = Well spent $25.
Click to expand...
Click to collapse
When I had the mogul with sprint:, it came with that plug. When I sold it on ebay, I kept it.. They sent the wrong plug. It was supposed to just be the 2 usb plugs.

[Q] Motorola Mini USB to HDMI ? will defy support this ??

I'm unable to post the outside link so pls search this on google
"motorola 1080P HDMI CABLE (15FT)"
Saw this on motorola shop
can defy support this?????
pls Reply ASAP

It's not possible to use the Mini-USB as TV-out on your Defy. So the answer is no.

aww...is there any possible mod for cm7 and miui so that tis could work on defy?

prozai said:
aww...is there any possible mod for cm7 and miui so that tis could work on defy?
Click to expand...
Click to collapse
as said before... no!
it`s not mini-usb it is micro-USB and it`s not possible to use it as TV out. Anyone who want`s TV out should have proper output jack. Devices that support that kind of cable have micro-USB and micro-HDMI port`s so it`s not the same port!!!!
To see what I`m talking about just look at the second picture od Atrix:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There are 2 kind` od jacks, micro-USB for data transfer and charging, and micro-HDMI for video output.

you're wrong. tv output through the usb port is possible, just look at the galaxy s2. but the defy doesnt support it. its chipset would, but its hardware-disabled... -.-

zakoo2 said:
you're wrong. tv output through the usb port is possible, just look at the galaxy s2. but the defy doesnt support it. its chipset would, but its hardware-disabled... -.-
Click to expand...
Click to collapse
so you mean if we "unlock" the bootloader, then we can write custom drivers for this to make it work? like in the sgs2 using an mhl adapter? or even using 3.5mm to output AV like some nokias do?
OH man, if yes, i would be on the top of this world.

tv out is the thing that most important to me on the phone... I've had an N8 before my Defy, and I had used the tv function alot!
i was searching alot on the Internet for a tv-out solution for the deft, but came out with nothing...
I'm only using Defy beacuse I got it for free...

Try the green cirkel ico "Media Share" if you can, can test it myzelf because y dont have the wifi stick for my led-tv ,y read thats the way whit this phoon it can do so. Y now what you mis on the Defy, same here on my Nokia C7, **** symbian but some nice gadgets like tv from the headpfoon plug, special when gaming, super big screen here on 47" tv en nice to via usb on tv use it like a hard disk.
Sorry for the bad typing, ym Dutch and Eng. is dificult here for oldie (56)

Teclast X80H wifi fix

For those who feels that their Teclast X80H has weak wifi, I did the following to improve the connection.
My 2 weeks Teclast X80H wifi performance is much lower as compared to my other devices. Without line of sight, and sitting on another room at 10 m distance, I can't connect to the wifi at all.
Having inspired by the following video:
https://www.youtube.com/watch?v=G3j6rOp0lvY
I decided to open my X80H to look at the antenna configuration, and possibly do the same for the tablet.
Refer to the following picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Look at the top for the antenna assembly. I tested using digital multimeter, and found out that basically the ground and the antenna is shorted. Exactly like the youtube video I reference to..
Upon desoldering the ground, my wifi improves immediately.
Another thing, you will need to change the wifi settings from the windows device manager, to use only the 802.11 b/g and disable the n connections. Somehow the antenna / the wifi chip is not good enough for n connection.

Desolder the minus point?
Hello, I have a teclast X80 Pro. I would like to desolder the ground. I can see two soldering points on the tablet. One is minus and the other one is plus. Do I have to desolder the minus point?
Many thanks in advance!

With DC voltage, the negative rail is commonly called the ground. There is no earth like you have in AC voltage.

ty
thank a lot,you solved my big problem .ty. :good:

double post

Soul7777 said:
For those who feels that their Teclast X80H has weak wifi, I did the following to improve the connection.
My 2 weeks Teclast X80H wifi performance is much lower as compared to my other devices. Without line of sight, and sitting on another room at 10 m distance, I can't connect to the wifi at all.
Having inspired by the following video:
https://www.youtube.com/watch?v=G3j6rOp0lvY
I decided to open my X80H to look at the antenna configuration, and possibly do the same for the tablet.
Refer to the following picture:
Look at the top for the antenna assembly. I tested using digital multimeter, and found out that basically the ground and the antenna is shorted. Exactly like the youtube video I reference to..
Upon desoldering the ground, my wifi improves immediately.
Another thing, you will need to change the wifi settings from the windows device manager, to use only the 802.11 b/g and disable the n connections. Somehow the antenna / the wifi chip is not good enough for n connection.
Click to expand...
Click to collapse
Desolder meaning remove (un-attached) the wire from board, is it ?

Hello , I have the exactly same problem with my teclast x80 plus.
Can you only cut the wire, I afraid that the hot iron damage the board.

I'm sorry to bring this up but anyone has results on the solution presented on this thread?
I opened my Teclast and the antenna installation is pretty much the same as in the picture above. I tried to pull it off but it didn't come out and I don't have a solder iron to desolder it. As the user above asked, but remains unanswered, can I just cut the antenna wire close to the solder?
(fyi, by repositioning (not desolder) the wire inside the tablet I started having better reception. Now I can go to the first floor without loosing connection but still it is slower than my other devices)
Thank you.

Hi. I did the mod yesterday. Now I have a functional wifi
thanks a lot for the info!!
But I had some problems...
1- Pay attention when you open the tablet, because I forget to remove the microSD card and the reader was forced a little and now the spring doesn't work and the SD card is not fixed I have to repair it
2- I forced a litlle in the bottom of the tablet and 2 minos scratches were made in the screen. Now the touch bottom of the tablet doesn't work and I have to replace the digitizer (I've buyed a new one. only 6 euros)
Do you know the way to replace it? I don't want to broke nothing else

I replaceed the antenna for the one of an Onda soldering it and performance improved a lot.

Dasaita - Idrive Controller?

I searched and I cannot find any information on this controller below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can't post a directly link to it unfortunately.
Does anyone have any experience with this?
I fell down a rabbit hole of how to hack the factory BMW idrive controller with CAN messages to use it as an HID controller...seems like a lot of work and time to get that working with an Android head unit.
However if you take a look at this controller, it seems to have 3 wires.
12v, Ground and... a signal wire? Like a stepped resistor?
This would be a big shortcut in having a BMW like controller if it would work with other Android Head Units using the steering wheel control input.
What do you guys think?

primarypostman said:
I searched and I cannot find any information on this controller below
I can't post a directly link to it unfortunately.
Does anyone have any experience with this?
I fell down a rabbit hole of how to hack the factory BMW idrive controller with CAN messages to use it as an HID controller...seems like a lot of work and time to get that working with an Android head unit.
However if you take a look at this controller, it seems to have 3 wires.
12v, Ground and... a signal wire? Like a stepped resistor?
This would be a big shortcut in having a BMW like controller if it would work with other Android Head Units using the steering wheel control input.
What do you guys think?
Click to expand...
Click to collapse
It's hard to see but there's a fourth pin that's white. I'm guessing that it's usb for the reason that that's a repro controller made for the android i drive replacements
I would get one and try that but the price is too steep to tinker with.

primarypostman said:
12v, Ground and... a signal wire? Like a stepped resistor?
Click to expand...
Click to collapse
I expect that the green wire will be the connection to the ibus. Rather than being resistive, it will be sending messages (short sequences of around 8 bytes) on the ibus which will be picked up by the appropriate module in the car.

I ordered one quite some time ago to play with. If I ever recieve it from China (it's been at least 3 months) I'll let you know how it works. I have Dasaita head units but I'll chop it up and see if it works as a typical wired remote on one of my other Android head units.

lemnad said:
I ordered one quite some time ago to play with. If I ever recieve it from China (it's been at least 3 months) I'll let you know how it works. I have Dasaita head units but I'll chop it up and see if it works as a typical wired remote on one of my other Android head units.
Click to expand...
Click to collapse
I am very interested in this project. My chinese idrive controller should have 5 pin and I would like to use with a tablet. I ordered it today so it should delivered in 2 months. Have you tried yours?

hackever said:
I am very interested in this project. My chinese idrive controller should have 5 pin and I would like to use with a tablet. I ordered it today so it should delivered in 2 months. Have you tried yours?
Click to expand...
Click to collapse
I've got mine today. It has a stm32f103c8t6 microcontroller on the board inside. I tried hooking up its cable to a USB port, but my computer did not recognize it as a USB device, unfortunately. More digging tomorrow...
p.s. I might have fried it by applying 12V to the red and black pins to see if it runs on 12V and maybe get the buttons to light up. hehe

12V would be fine to it, as the two voltage regulators on the board are designed to go up to 40V. Keep in mind the red and WHITE wire are power and ground. Not red/black like most rational people would think
However it's bad news.. It's not USB. It'd designed to communicate over the can bus and that's what the other two wires are hooked up to. A chip that translates CAN bus messages to something the STM32 microcontroller on the board can process. I'm going to try to write new firmware to the STM32 to make it talk over USB and see if that works.
However, this is not a plug and play solution for Android head units the way it arrives from Dasaita.

Chinese Head unit yt9216c ahd 0005 v004 20190916 hifi

Its calibration is off and I go keeps starting up and system ed m wont let you open nothing is this even the right info of what's on this unit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Steven myers said:
Its calibration is off and I go keeps starting up and system ed m wont let you open nothing is this even the right info of what's on this unitView attachment 5419041
Click to expand...
Click to collapse
So what is your question?

I'm trying to hook it up to my Dell laptop it's a 15 i7 16 g ram 512 rom I'm sure it's more than capable but when I connect the laptop to the stereo through USB ports my laptop doesn't even show it connected is there a program I need or something to be able to do what I need to to root this stereo or atleast recalibrate the touch screen on the stereo through the laptop I'm newbie and am just now willing to sacrifice to learn it's kinda hard knowing something's are cheap if you screw up

Steven myers said:
I'm trying to hook it up to my Dell laptop it's a 15 i7 16 g ram 512 rom I'm sure it's more than capable but when I connect the laptop to the stereo through USB ports my laptop doesn't even show it connected is there a program I need or something to be able to do what I need to to root this stereo or atleast recalibrate the touch screen on the stereo through the laptop I'm newbie and am just now willing to sacrifice to learn it's kinda hard knowing something's are cheap if you screw up
Click to expand...
Click to collapse
Okay Steven
Steven myers said:
I'm trying to hook it up to my Dell laptop it's a 15 i7 16 g ram 512 rom I'm sure it's more than capable but when I connect the laptop to the stereo through USB ports my laptop doesn't even show it connected is there a program I need or something to be able to do what I need to to root this stereo or atleast recalibrate the touch screen on the stereo through the laptop I'm newbie and am just now willing to sacrifice to learn it's kinda hard knowing something's are cheap if you screw up
Click to expand...
Click to collapse
Okay Steven, let's see if we can sort this out. Before you begin, you need to come to terms with that any modification of any Android, but particularly this one - requires intermediate knowledge of PC computers and Android devices. Any modification, if done incorrectly, might cause your head unit not to work anymore.
Your computer specs do not matter and have no impact on whether you can successfully connect and communicate with your head unit. The drivers however is a different story.
Please follow my video tutorial here that will help you to connect your head unit correctly, install the drivers and make a full backup. Enable English subtitles as they are more descriptive than some of the language I'm using in the video.
The video above will help you with all your questions so make sure to follow it. As for calibrating your head unit, most of this is done from Factory Settings in the head unit, not PC. Rooting an Android is only recommended if you really know what you're doing or at the very least has a good guide as a reference. Feel free to look at my guides in my signature.
If you are still within your warranty period, I would however suggest you return your head unit, just to be on the safe side.

thans all

Hi, Extreme Mod, I'm facing similar issue, however the youtube video have been taken down, is there an alternative,

Rance4d said:
Hi, Extreme Mod, I'm facing similar issue, however the youtube video have been taken down, is there an alternative,
Click to expand...
Click to collapse
The link has bee updated. Check again.

Noted thanks, also, on Xygala, there are sub updates with the file extension "ota.tar" any guide on how to install those aswell,

Rance4d said:
Noted thanks, also, on Xygala, there are sub updates with the file extension "ota.tar" any guide on how to install those aswell,
Click to expand...
Click to collapse
Sorry but this isn't the thread for this