There is a bug on my Qtec 2020(FW:166)-
when someone calls me no signal goes to my QTEC(But the beep signal goes from calling phone)-sometimes signal goes only at the end of the call,and i see a call as missed.
what is it :?:
It is difficult to say exactly what could be causing this kind of problem.
Might I suggest some troubleshooting tips?
1. Backup your device
2. Hard-Reset
3. Try some incoming calls to see if they work correctly.
4a. If 3 did not fix, try flashing your ROM with the newest version.
5a. If that solves your problem, re-install all of your programs and you are finished.
6a. If it does not solve your problem, you may have a hardware problem, contact the vendor.
4b. If 3 did fix your problem, re-install your programs one-at-a-time, giving time for testing between loading programs. Only after you have proven that call reception still works do you install the next program. In this way you determine if a program you have loaded is causing your problem.
HTH!
if I understood you correctly, you have a problem where the Incoming Call bubble doesn't show, not ringing sound when someone calls you. And sometimes, it takes like 5 seconds delay before it shows or rings?
i experienced this after installing some phone related software. i suspected that the system somehow is overloaded, and the memory is somehow insufficient to handle incoming call and notify you in time.
Do you have RingtoneX, PocketZenPhone, IA Caller ID, Caller2Picture, Cell Profiler ... etc installed? What are the phone related apps you have installed? Or perhaps, could you list what are in your \Windows\Startup, let us troubleshoot the culprit.
chriswo said:
if I understood you correctly, you have a problem where the Incoming Call bubble doesn't show, not ringing sound when someone calls you. And sometimes, it takes like 5 seconds delay before it shows or rings?
i experienced this after installing some phone related software. i suspected that the system somehow is overloaded, and the memory is somehow insufficient to handle incoming call and notify you in time.
Do you have RingtoneX, PocketZenPhone, IA Caller ID, Caller2Picture, Cell Profiler ... etc installed? What are the phone related apps you have installed? Or perhaps, could you list what are in your \Windows\Startup, let us troubleshoot the culprit.
Click to expand...
Click to collapse
YES.YOU ARE RIGHT.
From your list i installed only POCKET ZEN PHONE(but i also had this problem before i'v installed PocketZenPhone).
WINDOWS/STARTUP:
AFlashMan
CFlashMan
CheckAutorun
ChgDflnk
IA_Caller_ID(MAYBE THIS IS BUG :?: -but i have not it ins.on my QTEC)
MMReg
NFlashMan
poutlook
stk
TFlashMan
GUYS,Please,help...
So,what causes the bug :?: :roll:
I am running PocketZenPhone also, and do not experience this problem.
Unfortunately, I still believe that a HR is the only way you can prove that the problem is caused by software you have installed and not the hardware. It sounds drastic, but you must start from a clean PPC and prove that it works, then figure out which software is causing the problem.
ok,i'll soon try it.
BUT i wanna hear from chriswo what to do,cos he got the same bug. :arrow:
I've got a similar sort of bug, not sure what causes it though and its a pain,
I cant get the volume slider for the phone to stay above zero, i raise it and it beeps as i do it, and i close the volume control, open it againg and it back at the bottom, If i recieve an incomming call, all that happens is the screen flashes with the incomming call alert but no ringing tone at all?
how are the phone settings set ?
as in ring type ?
and how are the sounds and notifications settings
just checked them and they all appeared to be ok, but i wend back in and changed my ring tone and then tried to change it back and it said
'this ring tone is not working properly, You may want to choose a different one to use.'
Very strange, so i am now using oldphone as my ring tone and it is working perfectly!, looks like one of my ring tones has got corrupted somehow
I had the same problem also
Fix by HARD RESET.
At that time I try to test many Phone edition program. (on XDA 1 2002).
After that everytime when I try to install some new program, I'll backup my data first.
so,i still waiting for chriswo,cos he knows this sort of bug...
Well i think it happened after i installed the new Hotfix that improves the slide feature because i don't remember seeing this before installing it.
The problem is when i press the phone button, my video calling logo has "Call History" written over it. Now of course before i pressed it, the "Talk" changed to something else so i can make a video call.
Now whenever i press it, i go into call history.
Even going to Menu>Video Calling makes a normal phone call.
What do i do?
I even uninstalled the hotfix but the problem still exists, though the slide problem is now gone so i'm guessing the uninstall didn't work.
I have the exact same issue.
Same here!
Same here!
Go here for the fix.
Hi
since i use android for hd2 i have this strange problem with almost all version and it happen frequently on sense versions,
when the phone rings when i press answer i hear a parazit voice and after a while the phone app force close and the phone become unresponsive for one minute then it response normally except the phone app (dial etc) so i have to reboot the device to make it work again.
thank you
any answer?
I think you're facing the so called "robot voice".
To get ride of this, when you receive a call, put the speaker on and hand up to end the conversation. It should work normally for all call.
Try also to disable the tone sound while pressing numbers...
i will try to disable the dialpad tones thank you
I have the solution fot the loudspeaker issue. It's very simple (sorry if my english is not so good, but I'm a mexican dude)
*Steps:
1.- Open the "Device Help" app
2.- Go to "FIX" and then open "Hardware Test"
3.- Touch the "Speakers" option and clic on "Begin test"
4.- Wait a few seconds. Then clic on "No" when the sign appears.
5.- Clic on "Check again" and wait. Then clic on "YES"
6.- IMPORTANT: the volumen keys maybe stop working, because only shows the volume of call option. You need restar your device.
7.- After turning your device, go to "Device Help" and make the process only one time and restart again.
8.- READY! This should work.
Issues: The BT audio meaybe don't working. This fix is only temporary solution.
I HOPE THIS INFORMATION HELPS YOU.
Sorry again for my bad english
I tried this and it seems to be working. My notifications don't seem as loud as they were when I first started my phone but I can switch from vibrate to audible notifications without issue so far. Thanks!
What's the problem you're talking to
Sent from my XT1635-02 using XDA-Developers mobile app
I think one should avoid this fix as there are side effects with regard to hearing incoming callers and losing Bluetooth. Let's wait and see if Nougat fixes things for us.
This has just been posted on the Moto Forum by the Motorola Admin Manager: 'I'm happy to report that we're finalizing a software change that will address this issue and restore the notification volume to previous levels. We expect to start final testing very soon. I'll provide more information when I have details on delivery of the software. '
Hey all--
I've been unsuccessfully trying to troubleshoot this for a week or two to no avail, so I thought I'd reach out.
My phone ringtone no longer plays when I receive phone calls. Volume is up, no DoNotDisturb or silence settings on, and EVERY OTHER SOUND works just fine (e.g. app notifications, music/video, etc). If I go to my ringtone settings and try to select ANY option, NO audio plays for anything. However, I DO hear audio when trying to choose a new notification sound. Just nothing on the ringtone.
I acknowledge it may be due to some app I've installed recently, but I can't seem to trace it back to any one in particular. Next step is a full reset, which I'd prefer not to do... Anyone experienced this?
blynkofaneye said:
Hey all--
I've been unsuccessfully trying to troubleshoot this for a week or two to no avail, so I thought I'd reach out.
My phone ringtone no longer plays when I receive phone calls. Volume is up, no DoNotDisturb or silence settings on, and EVERY OTHER SOUND works just fine (e.g. app notifications, music/video, etc). If I go to my ringtone settings and try to select ANY option, NO audio plays for anything. However, I DO hear audio when trying to choose a new notification sound. Just nothing on the ringtone.
I acknowledge it may be due to some app I've installed recently, but I can't seem to trace it back to any one in particular. Next step is a full reset, which I'd prefer not to do... Anyone experienced this?
Click to expand...
Click to collapse
I've dealt with a few ringtone-related issues in the past, but not a prolonged one like you are describing.
Try this:
1. Clear all recent (open) Apps using the recent Apps button.
2. reboot: turn your phone off, and back on
3. do the Apps drawer>Device Help>Fix>Hardware Test>Speaker Test (even if you hear it, answer " no" and leave it marked as if the hardware test failed, continue to operate your phone full-time with this marked as fail)
4. Go to select your ringtone, tap once on desired ringtone and give it about 3 seconds, then tap a second time on same ringtone and it should play at normal volume. Press ok. ringtone should be working...If not, reboot phone and try #3. speaker test again.
DUDE. I don't really understand how, but that totally worked (first time on step 4, too)! You are a scholar and a gentleman, and I send you many real (and one digital) thanks. ???