whenever i click the recieve calls on my universal, i'll click the answer button.. and realize that it takes a lil longer for it to actually connect the call..
anyone here have the same problem here? any solutions??
tend to find it depends on:
1. THe phone skin you are using
2. Ring tone specific to each user
3. Caller id picture displays
4. Large ring tones
5. Other apps running simultaneously
6. How long since your last rom update
I think you will find that everydody experiences a 1 second to 2 second maximum delay
I am havin d same prob
Disable the skin on the dailer, and use a windows default ringtone. And a lot of free memory is always a plus
how to disable the dialer skin?
I believe it can be done here:
HKEY_LOCAL_MACHINE/Security/Phone/Skin
Then look for the DWORD "enabled" set it to 0
I am not sure about this though!!! You have to check google (like I did, and found this: http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=5075&catid=36
I have the same when I get a call, but I can live with that. My problem lately has been that when I get an incoming call my entire device freezes. I can press whichever button I like, but nothing works except a soft reset and then I would have missed the call. Has anyone else had this too? I hope it doesn't happen too often or else I send it off for repair (I pay insurance for a reason).
ng said:
I have the same when I get a call, but I can live with that. My problem lately has been that when I get an incoming call my entire device freezes. I can press whichever button I like, but nothing works except a soft reset and then I would have missed the call. Has anyone else had this too? I hope it doesn't happen too often or else I send it off for repair (I pay insurance for a reason).
Click to expand...
Click to collapse
jup, mine sometimes starts vibrating and just doesn't stop.
Soft reset is the only way to get my phone working again
ng said:
I have the same when I get a call, but I can live with that. My problem lately has been that when I get an incoming call my entire device freezes. I can press whichever button I like, but nothing works except a soft reset and then I would have missed the call. Has anyone else had this too? I hope it doesn't happen too often or else I send it off for repair (I pay insurance for a reason).
Click to expand...
Click to collapse
I have the same problem. When the MDA is open, everything works fine. But when the lid is closed, the mda freezes after an incoming call and softreset is the only solution. Any ideas about that?
I've got a Universal with all the default ROMs and whatnot. I also use SPB PocketPlus and vBar.
Recently, since I got a bluetooth earpiece (Motorola HS820) - though not when the earpiece is turned on/connected - my phone has started rejecting calls when I try and answer.
I normally have my phone closed (screen not showing). Since some bug stopped me from being able to talk on it whilst it is closed, I have been opening it so the screen shows (and the keyboard doesn't) before I press answer. However, now this rejecting problem has arisen. I get a call, I open my phone so the screen shows and then press the answer button on the spine. This stops the ringing, but the incoming call popup stays as though I haven't answered, the person doesn't hear me and I don't hear them, then I get a missed call notification.
This does not happen 100% of the time. So far I have only noticed it when I've been receiving calls from my mother. However, she's pretty much the only person who rings me
Anyone got any ideas as to what is causing this/how I can fix it?
Update: I've done a hard reset and it seems the button still isn't answering the call. It isn't rejecting the call, it just isn't answering it.
This phone is proving to be more trouble than it's worth...
I've just realized that I keep missing calls because it seems to me that the Touch HD takes entirely too long to wake up on an incoming call.
Example:
I called my phone, it rang TWO times before the phone started to wake up, by the time I was able to answer it, it was too late.
Anyway to speed up the waking of this phone on incoming calls. I can't have all these delays. Or is there a way to make it ring LONGER (as a workaround) before going to voicemail?
Does having the phone locked increase the time it takes to wake it up?
Question 2:
It seems like just picking up my phone from my desk answers it. That's no good, sometimes I want to pick it up to look the the caller id but it auto answers upon picking up the phone off my desk. Can this be disabled?
derrickonline said:
I've just realized that I keep missing calls because it seems to me that the Touch HD takes entirely too long to wake up on an incoming call.
Example:
I called my phone, it rang TWO times before the phone started to wake up, by the time I was able to answer it, it was too late.
Anyway to speed up the waking of this phone on incoming calls. I can't have all these delays. Or is there a way to make it ring LONGER (as a workaround) before going to voicemail?
Does having the phone locked increase the time it takes to wake it up?
Question 2:
It seems like just picking up my phone from my desk answers it. That's no good, sometimes I want to pick it up to look the the caller id but it auto answers upon picking up the phone off my desk. Can this be disabled?
Click to expand...
Click to collapse
Try using 3rd party apps like 'Advanced Config', 'HD Tweak' and 'SKTools' to tweak to optimise your HD performance.
I know HD Tweak has the option to enable or disable ring delay for incoming calls
I have tweak HD now. So let me ask you, why would anyone want a ring delay in the first place?
I hate how long it takes to answer a call. Sometimes i answer on the first ring and the caller says "what took you so long?".
What's even worse is, if the phone is doing something and someone rings, i can press the answer button all i like but nothing happens...the phone seems to clogged up with other tasks. This may just be the ROM though, i'm about to flash the new Touch of HD rom so i'll see how it goes.
Gat, I'm pretty sure it's a power issue. Windows Mobile is slow and clunky especially on a 528Mhz processor. Can't wait for tegra or snapdragon. I don't think another rom will help you.
derrickonline said:
I have tweak HD now. So let me ask you, why would anyone want a ring delay in the first place?
Click to expand...
Click to collapse
Personally I don't why, but I can't answer for everyone!
I hate how long it takes to answer a call. Sometimes i answer on the first ring and the caller says "what took you so long?".
What's even worse is, if the phone is doing something and someone rings, i can press the answer button all i like but nothing happens...the phone seems to clogged up with other tasks. This may just be the ROM though, i'm about to flash the new Touch of HD rom so i'll see how it goes.
Click to expand...
Click to collapse
Try using Dutty's Xtreme V1.8 ROM, link below. I haven't experienced any delays since I started using this ROM. May be a coincidence, but worth a try!
With Dutty's V1.8 rom it takes half-a-ring before the screen wakes up, and then a whole ring on silent before it makes any sound. So 1 1/2 rings before I know some-one is calling.
Guys, don't. This is a issue and fixed by HTC, there's a official patch for this problem: htc.com/www/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
fixed my equal problems at once!
The delay is caused by the HTC dialer and all the stuff it needs to load on an incomming call.
If it is a serious problem for you, use HD tweak to change the phone dialer back to WM6. This will give you instant ring on incomming call, but you will lose some features provided by the HTC dialer such as volume control during call, bluetooth notification on top bar,video calling and possibly mute on face down.
If you don't want to use HD Tweak the reg key is
HKLM\security\phone\skin_enabled
Option is 0 (disabled) 1 (enabled)
Soft reset to make the changes.
ardsar said:
The delay is caused by the HTC dialer and all the stuff it needs to load on an incomming call.
If it is a serious problem for you, use HD tweak to change the phone dialer back to WM6. This will give you instant ring on incomming call, but you will lose some features provided by the HTC dialer such as volume control during call, bluetooth notification on top bar,video calling and possibly mute on face down.
If you don't want to use HD Tweak the reg key is
HKLM\security\phone\skin_enabled
Option is 0 (disabled) 1 (enabled)
Soft reset to make the changes.
Click to expand...
Click to collapse
Hi, I tried this from HDTweak but it did not seem to make a difference. The phone still takes about 1.5 rings before it starts to ring itself. I have lost the bluetooth icon.
Hmmm - I think I will just go back to the HTC dialer
This post should be deleted, but I don't know how.
Sorry
This is a issue and fixed by HTC, there's a official patch for this problem: htc.com/www/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
fixed my equal problems at once!
Click to expand...
Click to collapse
bazzxdahtc, I can't find the patch for this issue under your link
This one should work: http://www.htc.com/europe/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
Look for:
- Hot fix for improving the on-screen slider feature for answering calls
and
- Hot fix to enhance response time for HTC Touch HD
These two made my HD work a lot better then before! I used to miss calls often due to the lag in answering incoming calls.
bazzxdahtc said:
This one should work: http://www.htc.com/europe/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
Look for:
- Hot fix for improving the on-screen slider feature for answering calls
and
- Hot fix to enhance response time for HTC Touch HD
These two made my HD work a lot better then before! I used to miss calls often due to the lag in answering incoming calls.
Click to expand...
Click to collapse
These 2 fixes have nothing to do with the famous 2 ring delay. The response time improvement was to solve the latency when using the keyboard - ie sometimes it would appear to freeze. The second fix is for the slider only.
Suggest you guys do a bit of searching as there are a lot of threads relating to this famous 2 ring delay with wm6. The first incomming call always seems to take a bit longer after the phone has been switched off or soft reset - did you try and see what the delay is several times? Appologies that using the wm6 dialer did not work for you - it certainly does for me and many others.
Just trying to help...
I run stock ROM(1.14.404.3(V2227)NLD)+regular updates/patches and this works on my device, you doubt my experiences?
Have you actually tried these yourself? Or are you just reasoning from your cooked ROM...
Suggest you stay nice to everyone.
No i dont doubt your experience apart from the fact that htc fixes are not specific to the 2 ring delay. It also has nothing to do with the fact im using non stock rom .i applied these tweeks to the standard rom before flashing my device. if you do a search for 2 ring deLay, you will see that this is a common problem. Also other sites such as www.pocketshield.netserver01.com/readme.aspx make reference to this exact problem
I'm only tryin to help, and ive spent a lot of my time investigating this issue.
Just a quick thought.. do you have an MP3 assigned as ringtone? I recently added an MP3 ringtone and suddenly it took a lot longer before the phone started ringing..
Changed it back to one of the standard tones and it was much faster.
I agree about the MP3 issue.
I often see my Touch HD waking up to handle the call 1-2 seconds before I hear the ringtone. As soon as the dialler skin is up (or S2U2 application) then I am able to answer the call without the MP3 ring kicking in.
Before I use S2U2, Pocketshiel and Inesoft programs in the same time..it takes at least 4 seconds to starts ring. but now only S2U2 its only 1 sec.
Guys I'm using 1.19.831 stock ROM, applied ONLY Slider hotfix from HTC, ringing with mp3 file (around 900kb size) and do these tweaks in HDtweak and Advanced Config 3.3:
Incoming ring delay = no;
Battery icon in phone menu = no;
Filesystem cache: enabled
Filesystem cache size: 8 mb;
File system filter chace: 131072 sectors;
Glyph cahce: 64 kb;
The delay is around 1.5 ring BEFORE it start ringing. 1 ring before display answer slider. I'm not 100% sure if all of above settings have any connection with the problem, but with these one --> a whole 1 ring delay is gone away...
Hi
I've got a Htc Touch HD from orange and maybe twice a day when I try to answer a call (either by sliding or pressing the hard button) the phone will freeze. It will still vibrate and ring but I have to do a soft reset to get it out of that state.
Nothing responds on the phone at all.
Sometimes it also cuts the other person off and doesn't crash, (so it looks like the other person hung up just before you answered it when they didn't)
Verrrry irratating! Esp when someone rings from withheld number!
Any ideas?
BTW, Making calls is fine no crashes, and experienced no other crashes on any other part of the phone except for this.
try downloading the patches from the HTC webby
Hi all,
After a lot of work and a phone exchange I got cyanogenmod to work on my phone, but now when I want to call someone the phone gets stuck!
This is what happens:
When I turn the phone on and try to call someone I get the normal metallic voice, after that I hang up (as instructed in some thread in this forum), but when I try to dial again the phone freezes on the dialer. The odd thing is when I press the home key or red key it responds nicely, and all the other apps work fine! Also, when I receive a call after this; the phone will ring, but when I answer -- total silence, I can't here the person on the other line nor can they hear me!
What can this be????
Thanks!
Hi,
I use MDJs_CyanogenMod7_v.2.6_NAND_A2SD+. in my HTC HD2.
the above problem rarely occure, if occure reboot the device may correct this problem.
Yup, I had to reboot it twice, but now it works great!