Hi.
I was so happy that i for once had a phone where everything just worked.
That was untill the october patch. About 1059 Mb.
Now my magnetic smart cover doesent wake up or shut down the screen anymore.
By the way im totally stock.
Anybody else experienced this?
Thanks
Knievel
i had this on the september update mate
Name of your cover?
Mine was nillkin mate
Sent from my Mi A1 using Tapatalk
Hey, guys, my LeEco 1S died completely and I am thinking to buy this Mi A1.
Would you recommend it from XDA point of view? I am into flashing and modding but plan to after voiding the warranty(after a year).
Please let me know. Also, I didn't know this device supports magnetic covers like Samsung S-series. A Flipkart link would be helpful, I'll add to my cart to buy when I have funds.
Thanks.
I tested the hall sensor and it's working fine but no go with a cover
Sent from my Mi A1 using Tapatalk
KnieveI said:
Hi.
I was so happy that i for once had a phone where everything just worked.
That was untill the october patch. About 1059 Mb.
Now my magnetic smart cover doesent wake up or shut down the screen anymore.
By the way im totally stock.
Anybody else experienced this?
Thanks
Knievel
Click to expand...
Click to collapse
i have same issue on my phone after this update ...
i tested my hall sensor...its working fine
stasevgl said:
i have same issue on my phone after this update ...
can anybody talk how to check my hall sensor?
Click to expand...
Click to collapse
You need a magnet mate the dial *#*#6484#*#* and choose hall sensor then run the magnet all over the front of the phone untill it senses it
Sent from my SHIELD Tablet K1 using Tapatalk
robgee789 said:
You need a magnet mate the dial *#*#6484#*#* and choose hall sensor then run the magnet all over the front of the phone untill it senses it
Sent from my SHIELD Tablet K1 using Tapatalk
Click to expand...
Click to collapse
thank you for answer!
do you know how to fix this issue? just wait new update or there is any easy way to downgrade?
stasevgl said:
thank you for answer!
do you know how to fix this issue? just wait new update or there is any easy way to downgrade?
Click to expand...
Click to collapse
My hall sensor works mate just not with a smart cover so it's pretty useless but yeah hopefully it will work again in an update
Sent from my Mi A1 using Tapatalk
KnieveI said:
Hi.
I was so happy that i for once had a phone where everything just worked.
That was untill the october patch. About 1059 Mb.
Now my magnetic smart cover doesent wake up or shut down the screen anymore.
By the way im totally stock.
Anybody else experienced this?
Thanks
Knievel
Click to expand...
Click to collapse
Same here!
The flip (Nillkin) was ok before and during the upgrade, with factory settings. I was happy for 1-2 hours only....
After November update problem solved.
Good news is that the 1 Dec firmware update resolve the smart cover issue.
Related
Hello!
I have a strange problem.
I bought a S-view cover on ebay, and it ´s not working on my phone.
I tested it on a buddys phone, same model, and then it works.
Now my question...
I guess something is broken on my phone, what is is that make s-view function?
Best regards
Jesper
M1911 said:
Hello!
I have a strange problem.
I bought a S-view cover on ebay, and it ´s not working on my phone.
I tested it on a buddys phone, same model, and then it works.
Now my question...
I guess something is broken on my phone, what is is that make s-view function?
Best regards
Jesper
Click to expand...
Click to collapse
You are on TW Rom or Stock Rom?
1Maxter1 said:
You are on TW Rom or Stock Rom?
Click to expand...
Click to collapse
I´m on custom rom, running Imperium v10.0, and so is my buddy.
M1911 said:
I´m on custom rom, running Imperium v10.0, and so is my buddy.
Click to expand...
Click to collapse
Update the rom to v11.
410
1Maxter1 said:
Update the rom to v11.
Click to expand...
Click to collapse
Done!
However no change, still not working.
I will ask my friend to do the same and then check with his phone.
I don´t understand what´s wrong, it worked on his phone earlier so i don´t think is rom related.
M1911 said:
Hello!
I have a strange problem.
I bought a S-view cover on ebay, and it ´s not working on my phone.
I tested it on a buddys phone, same model, and then it works.
Now my question...
I guess something is broken on my phone, what is is that make s-view function?
Best regards
Jesper
Click to expand...
Click to collapse
Try it in the stock rom and see if it works?
Or maybe you have a bad magnet sensor.
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Is there a way to check if the magnet sensor is broken?
M1911 said:
Is there a way to check if the magnet sensor is broken?
Click to expand...
Click to collapse
Try if any magnet pops up the sview screen?
Plus sensors under *#0*# might help too.
(Not sure)
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
DeepankarS said:
Try if any magnet pops up the sview screen?
Plus sensors under *#0*# might help too.
(Not sure)
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Click to expand...
Click to collapse
Magnet???
*#0*# when testing sensor says "PASS".
M1911 said:
Magnet???
*#0*# when testing sensor says "PASS".
Click to expand...
Click to collapse
Yeah..the sview cover has a magnet in it that makes the screen appear.
So if you have any magnet around..try it by hand..and see if it pops?
Rest even Im not sure whats blocking the sensors..might be the hardware
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
DeepankarS said:
Yeah..the sview cover has a magnet in it that makes the screen appear.
So if you have any magnet around..try it by hand..and see if it pops?
Rest even Im not sure whats blocking the sensors..might be the hardware
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Click to expand...
Click to collapse
I ran the the magnet test and it worked,,,,and now the mysterius thickens,,,,now the s-view works.
Is it possible the magnet somehow triggerad it to work?
Well, now it works so i´m happy :laugh:
M1911 said:
I ran the the magnet test and it worked,,,,and now the mysterius thickens,,,,now the s-view works.
Is it possible the magnet somehow triggerad it to work?
Well, now it works so i´m happy :laugh:
Click to expand...
Click to collapse
Hahaha it must be a block brother then
Im glad this trigger sirta thing worked for you
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Hello guys i got a Z2 2 weeks ago and i got a problem with the touch screen! I just hover my finger over the screen for example over the phone app and it opens! I dont even touch it! Its so annoying especially when typing because random letters are being pressed! What should i do? I did factory reset didnt help .
Should i send to service?? Any solutions?
What's your firmware? Mine used to do that but with the latest firmware update stopped.
Enviado do meu D6503
diecast said:
Hello guys i got a Z2 2 weeks ago and i got a problem with the touch screen! I just hover my finger over the screen for example over the phone app and it opens! I dont even touch it! Its so annoying especially when typing because random letters are being pressed! What should i do? I did factory reset didnt help .
Should i send to service?? Any solutions?
Click to expand...
Click to collapse
Check to see if glove mode is ON. That can cause Z2 to behave like that.
Thanks
Sent from my D6503 using XDA Free mobile app
Miroslav.Cvejic said:
Check to see if glove mode is ON. That can cause Z2 to behave like that.
Click to expand...
Click to collapse
I have checked it but its off i even did factory reset but nothing!
SolidSnake1976 said:
What's your firmware? Mine used to do that but with the latest firmware update stopped.
Enviado do meu D6503
Click to expand...
Click to collapse
My firmware was the last i i dont remember i took the latest 17 mb update with the close all function on multitask but the problem still there !!
I send it to service hope they will give me a new replacement or at least they will change the screen
Miroslav.Cvejic said:
Check to see if glove mode is ON. That can cause Z2 to behave like that.
Click to expand...
Click to collapse
Confirm. I activate glove mode and start happening again. As soon as I switched it off stopped.
Enviado do meu D6503
SolidSnake1976 said:
Confirm. I activate glove mode and start happening again. As soon as I switched it off stopped.
Enviado do meu D6503
Click to expand...
Click to collapse
Seriously??? Maybe it a bug in.my device [emoji20] [emoji20]
Apparently...
Enviado do meu D6503
Actually most z2 devices have this bug when you are putting them on a flat surface..a hardware bug.
Luc.Nex said:
Actually most z2 devices have this bug when you are putting them on a flat surface..a hardware bug.
Click to expand...
Click to collapse
Flat surface? Seriously? This is a disappointment! Mine did it not only in surface but always and everywhwre
Also guys has anyone else has the power button and the volume buttons more pressed inside than normal but working like normal
Some other xperias i saw have their power button more out than mine! And when u press it it makes a clicking sound mine doesnt make that clicking sound
Is it normal?
My screen works that way too..I can use the screen by hovering only I think it's like this because you can use it with different odjects like a pencil, the headphone's jack, etc..
antkalaitzakis96 said:
My screen works that way too..I can use the screen by hovering only [emoji14] I think it's like this because you can use it with different odjects like a pencil, the headphone's jack, etc..
Click to expand...
Click to collapse
Well ok i dont like it its a bug! Especially when you typing it messes everything up! How about the buttons dude?
diecast said:
Well ok i dont like it its a bug! Especially when you typing it messes everything up! How about the buttons dude?
Click to expand...
Click to collapse
Are you using a screen protector. As using a tempered glass screen protector would solve 80-95% of the problem, as it increases the distance between the actual screen the touch surface. thus, making it less sensitive and smooth.
karim-ps said:
Are you using a screen protector. As using a tempered glass screen protector would solve 80-95% of the problem, as it increases the distance between the actual screen the touch surface. thus, making it less sensitive and smooth.
Click to expand...
Click to collapse
No i dont use anything! I send it to service! For me tempered glass its not the solution! They have to fix it ! The phone is new i dont want any future problems! I hope you understand what i mean
hey guys i got an update! i sent the device for repair,they changed me screen they put a new screen and the problem still there i am very dissapointed because i told them that the problem still there and i sent again back and they couldnt find the problem..thats unbelievable!!!
what can i do now? put a tempered glass can fix it? or a screen protector?
please give me an advice
diecast said:
hey guys i got an update! i sent the device for repair,they changed me screen they put a new screen and the problem still there i am very dissapointed because i told them that the problem still there and i sent again back and they couldnt find the problem..thats unbelievable!!!
what can i do now? put a tempered glass can fix it? or a screen protector?
please give me an advice
Click to expand...
Click to collapse
It's not a hardware issue, it's a software issue.
V4LKyR said:
It's not a hardware issue, it's a software issue.
Click to expand...
Click to collapse
software bug? seriously? and how it can be fixed??
diecast said:
software bug? seriously? and how it can be fixed??
Click to expand...
Click to collapse
You need to change the values of the touchscreen controller file. Do you have root?
V4LKyR said:
You need to change the values of the touchscreen controller file. Do you have root?
Click to expand...
Click to collapse
No i am not root!seriously only root is the solution ?
Στάλθηκε από το D6503 μου χρησιμοποιώντας Tapatalk
Hello guys,
Need a help.
I am facing a weird issue that sometimes when I get a call, the phone switches off within the first 1-2 secs abruptly and doesn't power on again, this has occurred many a times and I have no idea why the problem exists so I went ahead to reset the phone to factory settings but with no luck as after 1 day it gave me the same issue.
Would be of great help if someone provides me a solution to this.
Regards,
Suvojit
No idea..have never faced this kind of issues
Sent from my Moto G (4) using Tapatalk
I have the same problem after 500mb update
Sent from my Moto G (4) using Tapatalk[/QUOTE]
That's maybe because proximity sensor might be sensing the wrong distance.....are you using anything to cover your screen or have something between the speaker and the front camera?
I am also facing the same problem from evening.
sshock said:
That's maybe because proximity sensor might be sensing the wrong distance.....are you using anything to cover your screen or have something between the speaker and the front camera?
I am also facing the same problem from evening.
Click to expand...
Click to collapse
No bro I dot think that it would be an issue with the proximity sensor as it is not only when my phone is in my pocket but otherwise also its getting switched off like that.
SuvojitAown said:
No bro I dot think that it would be an issue with the proximity sensor as it is not only when my phone is in my pocket but otherwise also its getting switched off like that.
Click to expand...
Click to collapse
Are you using a screen protector?
doomed151 said:
Are you using a screen protector?
Click to expand...
Click to collapse
Yes I am using tempered glass screen protector. But in the initial 1 month I didn't any issue even if having the screen protector.
SuvojitAown said:
Yes I am using tempered glass screen protector. But in the initial 1 month I didn't any issue even if having the screen protector.
Click to expand...
Click to collapse
It is very, very, very likely that the screen protector is the issue.
Same problem
i have the same problem i thought it was a bug in marshmallow so i update my device to 7.0 and i still having the same problem ?:crying::crying: any ideas , how to solve it ?
Hey guys,
My Oneplus 5 is working fine without issues but when I make a phone call and have the phone up to my face on almost every call the speaker phone ends up going on by itself. I think this is because the screen is turning on even though the phone is up to my face which would probably be the proximity sensor. It might be worth noting that i use the phone on my left ear as I am a lefty. Is anyone else having this problem and does anyone know a solution to this problem?
Thanks!
NYFan said:
Hey guys,
My Oneplus 5 is working fine without issues but when I make a phone call and have the phone up to my face on almost every call the speaker phone ends up going on by itself. I think this is because the screen is turning on even though the phone is up to my face which would probably be the proximity sensor. It might be worth nothing that i use the phone on my left ear as I am a lefty. Is anyone else having this problem and does anyone know a solution to this problem?
Thanks!
Click to expand...
Click to collapse
Me too... The only solution i find its block the screen
Enviado do meu ONEPLUS A5000 através de Tapatalk
Are you using a screen protector that covers the sensor?
Sent from my ONEPLUS A5000 using Tapatalk
Devhux said:
Are you using a screen protector that covers the sensor?
Click to expand...
Click to collapse
No I'm not using anything but a cheap gel back protector.
I have the same problem. But I thought the screen was turning on because of double tap to wake .
Same issue here, I even started a thread about it weeks ago. Seems like there must be a dodgy batch of sensors.
I'm going to send mine back under warranty once I can get my 6o back from my daughter so I have a backup phone.
Sent from my OnePlus5 using XDA Labs
I have the same issue. I used *#808# to check whether the Proximity sensor is working as it should. And it does. For me it more looks like a software issue
Had the screen replaced on my MiA1 recently.
Initially when I got it back the fingerprint sensor worked, but seemingly not as well as it had. I put it down to the hot weather. Now, 3days later it's not working at all
Could this be related to the screen repair? (Assuming yes), if so, is it a fix I can do myself out do I need to try argue it out with the shop?
Ta
Sent from my Mi A1 using Tapatalk
vaderag said:
Had the screen replaced on my MiA1 recently.
Initially when I got it back the fingerprint sensor worked, but seemingly not as well as it had. I put it down to the hot weather. Now, 3days later it's not working at all
Could this be related to the screen repair? (Assuming yes), if so, is it a fix I can do myself out do I need to try argue it out with the shop?
Ta
Click to expand...
Click to collapse
open back cover
check fingerprint connector attached or not....its very simple....
Silly question maybe but is there any instructions on removing the back cover??
Sent from my Mi A1 using Tapatalk