Hello guys i got a Z2 2 weeks ago and i got a problem with the touch screen! I just hover my finger over the screen for example over the phone app and it opens! I dont even touch it! Its so annoying especially when typing because random letters are being pressed! What should i do? I did factory reset didnt help .
Should i send to service?? Any solutions?
What's your firmware? Mine used to do that but with the latest firmware update stopped.
Enviado do meu D6503
diecast said:
Hello guys i got a Z2 2 weeks ago and i got a problem with the touch screen! I just hover my finger over the screen for example over the phone app and it opens! I dont even touch it! Its so annoying especially when typing because random letters are being pressed! What should i do? I did factory reset didnt help .
Should i send to service?? Any solutions?
Click to expand...
Click to collapse
Check to see if glove mode is ON. That can cause Z2 to behave like that.
Thanks
Sent from my D6503 using XDA Free mobile app
Miroslav.Cvejic said:
Check to see if glove mode is ON. That can cause Z2 to behave like that.
Click to expand...
Click to collapse
I have checked it but its off i even did factory reset but nothing!
SolidSnake1976 said:
What's your firmware? Mine used to do that but with the latest firmware update stopped.
Enviado do meu D6503
Click to expand...
Click to collapse
My firmware was the last i i dont remember i took the latest 17 mb update with the close all function on multitask but the problem still there !!
I send it to service hope they will give me a new replacement or at least they will change the screen
Miroslav.Cvejic said:
Check to see if glove mode is ON. That can cause Z2 to behave like that.
Click to expand...
Click to collapse
Confirm. I activate glove mode and start happening again. As soon as I switched it off stopped.
Enviado do meu D6503
SolidSnake1976 said:
Confirm. I activate glove mode and start happening again. As soon as I switched it off stopped.
Enviado do meu D6503
Click to expand...
Click to collapse
Seriously??? Maybe it a bug in.my device [emoji20] [emoji20]
Apparently...
Enviado do meu D6503
Actually most z2 devices have this bug when you are putting them on a flat surface..a hardware bug.
Luc.Nex said:
Actually most z2 devices have this bug when you are putting them on a flat surface..a hardware bug.
Click to expand...
Click to collapse
Flat surface? Seriously? This is a disappointment! Mine did it not only in surface but always and everywhwre
Also guys has anyone else has the power button and the volume buttons more pressed inside than normal but working like normal
Some other xperias i saw have their power button more out than mine! And when u press it it makes a clicking sound mine doesnt make that clicking sound
Is it normal?
My screen works that way too..I can use the screen by hovering only I think it's like this because you can use it with different odjects like a pencil, the headphone's jack, etc..
antkalaitzakis96 said:
My screen works that way too..I can use the screen by hovering only [emoji14] I think it's like this because you can use it with different odjects like a pencil, the headphone's jack, etc..
Click to expand...
Click to collapse
Well ok i dont like it its a bug! Especially when you typing it messes everything up! How about the buttons dude?
diecast said:
Well ok i dont like it its a bug! Especially when you typing it messes everything up! How about the buttons dude?
Click to expand...
Click to collapse
Are you using a screen protector. As using a tempered glass screen protector would solve 80-95% of the problem, as it increases the distance between the actual screen the touch surface. thus, making it less sensitive and smooth.
karim-ps said:
Are you using a screen protector. As using a tempered glass screen protector would solve 80-95% of the problem, as it increases the distance between the actual screen the touch surface. thus, making it less sensitive and smooth.
Click to expand...
Click to collapse
No i dont use anything! I send it to service! For me tempered glass its not the solution! They have to fix it ! The phone is new i dont want any future problems! I hope you understand what i mean
hey guys i got an update! i sent the device for repair,they changed me screen they put a new screen and the problem still there i am very dissapointed because i told them that the problem still there and i sent again back and they couldnt find the problem..thats unbelievable!!!
what can i do now? put a tempered glass can fix it? or a screen protector?
please give me an advice
diecast said:
hey guys i got an update! i sent the device for repair,they changed me screen they put a new screen and the problem still there i am very dissapointed because i told them that the problem still there and i sent again back and they couldnt find the problem..thats unbelievable!!!
what can i do now? put a tempered glass can fix it? or a screen protector?
please give me an advice
Click to expand...
Click to collapse
It's not a hardware issue, it's a software issue.
V4LKyR said:
It's not a hardware issue, it's a software issue.
Click to expand...
Click to collapse
software bug? seriously? and how it can be fixed??
diecast said:
software bug? seriously? and how it can be fixed??
Click to expand...
Click to collapse
You need to change the values of the touchscreen controller file. Do you have root?
V4LKyR said:
You need to change the values of the touchscreen controller file. Do you have root?
Click to expand...
Click to collapse
No i am not root!seriously only root is the solution ?
Στάλθηκε από το D6503 μου χρησιμοποιώντας Tapatalk
Related
I posted a question in regards to this on Q&A section of the forum but no one was answering my question. I went ahead and did a bit more research. I finally figured out the way to change the sensitivity.
I have seen people asking in the past about this so I decided to post it here.
Note: root is required unfortunately. You will need a root file manager in order to save the file after editing. (Es file Explorer works well for me and it's free)
First, if you are using Es file Explorer, you need to enable root explorer on the manu, then locate the file:
/system/usr/idc/max1187x_touchscreen_0.idc
Opened it as text, I chose to use Es note editor that came with the Es file Explorer
Under '# Touch Filter' you can see
'touch.filter.level = 2'
Change the number to higher to make the screen less sensitive and lower to make the screen more sensitive.
Save and restart the phone.
Sent from my D6503 using Tapatalk
To clarify, this is to change how far your finger(s) have to be from the screen to be registered as a 'touch', correct? I've had an issue where my thumb would hover over a button and accidentally press it, more than a few times. If this fixes that then I guess I don't have to make a question thread of my own haha
What value did you end up settling on for sensitivity?
Dude. I thought I was going crazy. The screen is too sensitive on mine. A zillion times it would register a touch when my thumb hovered over it, sometimes a long press response. Glad to see I wasn't imagining it.
Sent from my D6503 using XDA Free mobile app
ricebun said:
To clarify, this is to change how far your finger(s) have to be from the screen to be registered as a 'touch', correct? I've had an issue where my thumb would hover over a button and accidentally press it, more than a few times. If this fixes that then I guess I don't have to make a question thread of my own haha
What value did you end up settling on for sensitivity?
Click to expand...
Click to collapse
well sort of...I think it's related to how hard you need to press the screen as well, so I would call it sensitivity instead.
I had the same issue as you that's why I tried to figure out a way to make it better.
3 works fine for me, but you might want to change it to your liking. don't go nuts and set it to 10 or something. otherwise, you will have to press the screen really hard to get some a response.
Sent from my D6503 using Tapatalk
dante2086 said:
Dude. I thought I was going crazy. The screen is too sensitive on mine. A zillion times it would register a touch when my thumb hovered over it, sometimes a long press response. Glad to see I wasn't imagining it.
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
I know right? when someone else was posting on the forum I remember someone said it was a feature and we just had to get used to it...-_-
Sent from my D6503 using Tapatalk
jeremy.shi said:
I posted a question in regards to this on Q&A section of the forum but no one was answering my question. I went ahead and did a bit more research. I finally figured out the way to change the sensitivity.
I have seen people asking in the past about this so I decided to post it here.
Note: root is required unfortunately. You will need a root file manager in order to save the file after editing. (Es file Explorer works well for me and it's free)
First, if you are using Es file Explorer, you need to enable root explorer on the manu, then locate the file:
/system/usr/idc/max1187x_touchscreen_0.idc
Opened it as text, I chose to use Es note editor that came with the Es file Explorer
Under '# Touch Filter' you can see
'touch.filter.level = 2'
Change the number to higher to make the screen less sensitive and lower to make the screen more sensitive.
Save and restart the phone.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Thank you SO MUCH for this. Finally I can use my stylus and scroll without selecting stuff!!!! Much appreciated.
---------- Post added at 08:51 AM ---------- Previous post was at 08:39 AM ----------
PS : How do i reduce the touch area needed for a registered touch?
Puffin617 said:
PS : How do i reduce the touch area needed for a registered touch?
Click to expand...
Click to collapse
Hmmm...Sorry I don't really know how to do that. I assume it's one of those parameters in that file.
It's also a good thing tho I'm thinking it's super sensitive so that a pencil could work. I use my pencil so often I thinks it's so cool and don't understand why Sony didn't advertise this pencil feature because it does work really well.
sfex3best said:
It's also a good thing tho I'm thinking it's super sensitive so that a pencil could work. I use my pencil so often I thinks it's so cool and don't understand why Sony didn't advertise this pencil feature because it does work really well.
Click to expand...
Click to collapse
Not to me. If they want it to be a feature, at least give people an option to disable it. It really irritates me.
After playing around with the "touch.filter.level", I realised it makes NO improvement on the stylus...
My issue I have with the stylus is that when scrolling, it often registers a "lift" and "touch", thus selecting stuff inadvertently...
I need to reduce the touch area that registers a constant touch, like a scroll...
Anyone clued up with the other settings? SONY Devs?
UPDATE: I turned on GLOVE MODE in Settings-->Display and then changed touch.gloveMode.deflatePressure = 1 to 0.1. Working like a charm now.
My Z2 also has this hypersensitivity problem, it reacts without my thumb even touching the screen, just by getting close to it. This is extremely annoying.
I'm trying this to solve my problem, but the screen sensitivity doesn't change, no matter which value I put in the touch.filter.level, I tried from 0.1 to 50 and nothing changed.
Is this really a software problem? or is it a hardware problem?
Was this made on porpose by Sony? Because for me it is really annoying, the screen registers unwanted touches all the time and when i'm playing something, it also annoys me.
screen sensitivity is a Firmware issue with Xperia Z2. sony has said they are working on fixing in upcoming firmwares (it had a s at the end so this probably means that sony ment it wont ever be fixed... any time soon)
static can cause ghost touched with xperia Z2 to my experiance.
I also have the screen sensitive issue. Have tried to change some values from the file, but no effect. Finally, I've solved the issue by using a tempered glass
mrhoibq said:
I also have the screen sensitive issue. Have tried to change some values from the file, but no effect. Finally, I've solved the issue by using a tempered glass
Click to expand...
Click to collapse
??? Explain please?
Puffin617 said:
??? Explain please?
Click to expand...
Click to collapse
Yeap...
I can confirm that really works.
Just buy screen protector and apply it on the screen.
I'm using Nillkin tempered glass from the day one and never had any problems with screen or touch sensitivity...
Sent from my D6503 using Tapatalk
funky0308 said:
Yeap...
I can confirm that really works.
Just buy screen protector and apply it on the screen.
I'm using Nillkin tempered glass from the day one and never had any problems with screen or touch sensitivity...
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
THIS one or THIS
What is this L50, L50t & L50w on all the links?
Puffin617 said:
THIS one?
Click to expand...
Click to collapse
I bought this one but I believe they are the same (just don't know are those Canadian or some other country $ or what on your link)
I like to buy from Australia on ebay, I receive items in ten days (EU)
Sent from my D6503 using Tapatalk
funky0308 said:
I bought this one but I believe they are the same (just don't know are those Canadian or some other country $ or what on your link)
I like to buy from Australia on ebay, I receive items in ten days (EU)
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
That is US dollars. I buy just from US Amazon because a friend can fly it in with him...
Puffin617 said:
That is US dollars. I buy just from US Amazon because a friend can fly it in with him...
Click to expand...
Click to collapse
40$?
That's three times expensive than usual..
But OK...that will help you for sure, that's great SP and it helps with sensitivity problem on Z2
Sent from my D6503 using Tapatalk
Is there a difference between "Anti-Explosion" and "Tempered" Glass?
What is L50, L50W?
So here's a little video of me checking the time while sitting on the couch. Very frustrating. Any tips or fixes available to make it better?
https://youtu.be/iukYtlqDww4
clouds5 said:
So here's a little video of me checking the time while sitting on the couch. Very frustrating. Any tips or fixes available to make it better?
https://youtu.be/iukYtlqDww4
Click to expand...
Click to collapse
make it unprivate
DrEzkimo said:
make it unprivate
Click to expand...
Click to collapse
Done :angel:
clouds5 said:
Done :angel:
Click to expand...
Click to collapse
With what firmware do you have that issue? Maby factory reset can help
Whitefoxy said:
With what firmware do you have that issue? Maby factory reset can help
Click to expand...
Click to collapse
Did a clean install when 5.1.1 came out... just upgraded to most recent fw but it's been like this since I upgraded to lollipop.
My Z3C never had this issue. DT2W works flawlessly but it's disabled on my phone because it was waking up too often while in my pocket
The thing is DT2W worked flawlessly on the first kitkat FW when this phone came out... After the upgrades you'll hv to move it like pick it up then it'll work properly. If you leave it on a flat surface for awhile and tap it without moving it then it'll be like in the OP's video.
Sent from my SM-T705 using XDA Free mobile app
It's the same for me. Worked very good on 4.4, now only with movement before on 5.0, 5.1. I think they tried to make it less sensitive to waking the screen in the pocket or something. Though not the best solution.
romcio47 said:
My Z3C never had this issue. DT2W works flawlessly but it's disabled on my phone because it was waking up too often while in my pocket
Click to expand...
Click to collapse
If it wakes up in your pocket, then make the screen face outwards when you put it in your pocket problem solved :'D That's what i do anyway.
Sent from my D5833 using XDA Free mobile app
Sadman Khan said:
If it wakes up in your pocket, then make the screen face outwards when you put it in your pocket [emoji14] problem solved :'D That's what i do anyway.
Sent from my D5833 using XDA Free mobile app
Click to expand...
Click to collapse
I'd rather not, I scratched my previous phone's screen really bad when doing this. I got out of my way for someone and ground with my hip against a stone wall.
Sadman Khan said:
If it wakes up in your pocket, then make the screen face outwards when you put it in your pocket problem solved :'D That's what i do anyway.
Sent from my D5833 using XDA Free mobile app
Click to expand...
Click to collapse
GravityBox has this "Proximity wake-up" feature.
The phone will never wake-up when the proximity sensor is covered (even when you use the power button instead of double-tap)
Sometimes the double tap doesn't respond well at all.
doubletakeit said:
GravityBox has this "Proximity wake-up" feature.
The phone will never wake-up when the proximity sensor is covered (even when you use the power button instead of double-tap)
Click to expand...
Click to collapse
Nice find. But isn't that going to be a big battery drain?
clouds5 said:
Nice find. But isn't that going to be a big battery drain?
Click to expand...
Click to collapse
I didn't notice any battery drain using that feature.
It seems the sensor is not used all the time. Maybe it is used only when there's an attempt to wake up the phone.
Testing now
najodleglejszy said:
I'd rather not, I scratched my previous phone's screen really bad when doing this. I got out of my way for someone and ground with my hip against a stone wall.
Click to expand...
Click to collapse
Well okay. Umm what :| Disclaimer: I am not to be held responsible for any kind of freak accident like this :'D
Sent from my D5833 using XDA Free mobile app
najodleglejszy said:
I'd rather not, I scratched my previous phone's screen really bad when doing this. I got out of my way for someone and ground with my hip against a stone wall.
Click to expand...
Click to collapse
Do your phone a favour and get a tempered glass screen protector http://allegro.pl/nillkin-9h-h-szklo-folia-lcd-xperia-z3-compact-i5660652914.html
adamk7 said:
Do your phone a favour and get a tempered glass screen protector http://allegro.pl/nillkin-9h-h-szklo-folia-lcd-xperia-z3-compact-i5660652914.html
Click to expand...
Click to collapse
I already got one, along with CaseMate Barely There. don't wanna repeat that Mini Pro mistake.
lol so you have a case and a tempered glass screen protector and you are adjusting the way you put your phone in your pocket in order to avoid the possibility of grinding your hip into a wall whilst avoiding someone. wow. you are one cautious individual.
Just get gravity box. Once you have that tap to wake is perfect.
jarayn said:
lol so you have a case and a tempered glass screen protector and you are adjusting the way you put your phone in your pocket in order to avoid the possibility of grinding your hip into a wall whilst avoiding someone. wow. you are one cautious individual.
Just get gravity box. Once you have that tap to wake is perfect.
Click to expand...
Click to collapse
yes I am cautious, this phone was quite expensive and I'm going to use it for as long as possible. and yes, I've already enabled the proximity wake in GB.
Hello guys,
Need a help.
I am facing a weird issue that sometimes when I get a call, the phone switches off within the first 1-2 secs abruptly and doesn't power on again, this has occurred many a times and I have no idea why the problem exists so I went ahead to reset the phone to factory settings but with no luck as after 1 day it gave me the same issue.
Would be of great help if someone provides me a solution to this.
Regards,
Suvojit
No idea..have never faced this kind of issues
Sent from my Moto G (4) using Tapatalk
I have the same problem after 500mb update
Sent from my Moto G (4) using Tapatalk[/QUOTE]
That's maybe because proximity sensor might be sensing the wrong distance.....are you using anything to cover your screen or have something between the speaker and the front camera?
I am also facing the same problem from evening.
sshock said:
That's maybe because proximity sensor might be sensing the wrong distance.....are you using anything to cover your screen or have something between the speaker and the front camera?
I am also facing the same problem from evening.
Click to expand...
Click to collapse
No bro I dot think that it would be an issue with the proximity sensor as it is not only when my phone is in my pocket but otherwise also its getting switched off like that.
SuvojitAown said:
No bro I dot think that it would be an issue with the proximity sensor as it is not only when my phone is in my pocket but otherwise also its getting switched off like that.
Click to expand...
Click to collapse
Are you using a screen protector?
doomed151 said:
Are you using a screen protector?
Click to expand...
Click to collapse
Yes I am using tempered glass screen protector. But in the initial 1 month I didn't any issue even if having the screen protector.
SuvojitAown said:
Yes I am using tempered glass screen protector. But in the initial 1 month I didn't any issue even if having the screen protector.
Click to expand...
Click to collapse
It is very, very, very likely that the screen protector is the issue.
Same problem
i have the same problem i thought it was a bug in marshmallow so i update my device to 7.0 and i still having the same problem ?:crying::crying: any ideas , how to solve it ?
Hi.
I was so happy that i for once had a phone where everything just worked.
That was untill the october patch. About 1059 Mb.
Now my magnetic smart cover doesent wake up or shut down the screen anymore.
By the way im totally stock.
Anybody else experienced this?
Thanks
Knievel
i had this on the september update mate
Name of your cover?
Mine was nillkin mate
Sent from my Mi A1 using Tapatalk
Hey, guys, my LeEco 1S died completely and I am thinking to buy this Mi A1.
Would you recommend it from XDA point of view? I am into flashing and modding but plan to after voiding the warranty(after a year).
Please let me know. Also, I didn't know this device supports magnetic covers like Samsung S-series. A Flipkart link would be helpful, I'll add to my cart to buy when I have funds.
Thanks.
I tested the hall sensor and it's working fine but no go with a cover
Sent from my Mi A1 using Tapatalk
KnieveI said:
Hi.
I was so happy that i for once had a phone where everything just worked.
That was untill the october patch. About 1059 Mb.
Now my magnetic smart cover doesent wake up or shut down the screen anymore.
By the way im totally stock.
Anybody else experienced this?
Thanks
Knievel
Click to expand...
Click to collapse
i have same issue on my phone after this update ...
i tested my hall sensor...its working fine
stasevgl said:
i have same issue on my phone after this update ...
can anybody talk how to check my hall sensor?
Click to expand...
Click to collapse
You need a magnet mate the dial *#*#6484#*#* and choose hall sensor then run the magnet all over the front of the phone untill it senses it
Sent from my SHIELD Tablet K1 using Tapatalk
robgee789 said:
You need a magnet mate the dial *#*#6484#*#* and choose hall sensor then run the magnet all over the front of the phone untill it senses it
Sent from my SHIELD Tablet K1 using Tapatalk
Click to expand...
Click to collapse
thank you for answer!
do you know how to fix this issue? just wait new update or there is any easy way to downgrade?
stasevgl said:
thank you for answer!
do you know how to fix this issue? just wait new update or there is any easy way to downgrade?
Click to expand...
Click to collapse
My hall sensor works mate just not with a smart cover so it's pretty useless but yeah hopefully it will work again in an update
Sent from my Mi A1 using Tapatalk
KnieveI said:
Hi.
I was so happy that i for once had a phone where everything just worked.
That was untill the october patch. About 1059 Mb.
Now my magnetic smart cover doesent wake up or shut down the screen anymore.
By the way im totally stock.
Anybody else experienced this?
Thanks
Knievel
Click to expand...
Click to collapse
Same here!
The flip (Nillkin) was ok before and during the upgrade, with factory settings. I was happy for 1-2 hours only....
After November update problem solved.
Good news is that the 1 Dec firmware update resolve the smart cover issue.
Did anyone face a problem where the touch screen won't get clicked?
It happened sometimes to me when I was try to type and it always happen in the same spot and that is when I try to type "I"( this also happen right now btw ). Thx for the answer
Adityagiann said:
Did anyone face a problem where the touch screen won't get clicked?
It happened sometimes to me when I was try to type and it always happen in the same spot and that is when I try to type "I"( this also happen right now btw ). Thx for the answer
Click to expand...
Click to collapse
did your screen had tampered glass?
No I'm using a plastic one
Adityagiann said:
No I'm using a plastic one
Click to expand...
Click to collapse
i didnt have any problem with touchscreen..try send to samsung center and tell them what your problem..they will check for you
This also is happening to me after I put screen protect on my screen.
This is not problem with the touch screen.
---------- Post added at 05:24 PM ---------- Previous post was at 05:19 PM ----------
I think my glass protect is too much thick, I think I need get <0.2mm glass protect, sry for bad english..
khaisttj92 said:
i didnt have any problem with touchscreen..try send to samsung center and tell them what your problem..they will check for you
Click to expand...
Click to collapse
Yea i was already did it and took 4 days to run a test on my phone and do the fix bro.. damn ??
Davva said:
This also is happening to me after I put screen protect on my screen.
This is not problem with the touch screen.
---------- Post added at 05:24 PM ---------- Previous post was at 05:19 PM ----------
I think my glass protect is too much thick, I think I need get <0.2mm glass protect, sry for bad english..
Click to expand...
Click to collapse
Well if I remember, it has already happened on the day i bought the phone but i didn't really excpecting this to be the screen problem that is really annoyed me. So i think its's not because the screen protector, rather the screen itself because it only happen in 1 spot, not the entire screen.
Adityagiann said:
Well if I remember, it has already happened on the day i bought the phone but i didn't really excpecting this to be the screen problem that is really annoyed me. So i think its's not because the screen protector, rather the screen itself because it only happen in 1 spot, not the entire screen.
Click to expand...
Click to collapse
first day i bought the phone has flicker when unlock tbe phone then send to samsung center they change the screen..then flicker still exist then send back again..they change motherboard then still flicker...then got software update flicker doesnt exist anymore..so i dont know about the screen..because i had change my screen earlier..btw did you have problem in greyish aod when your surronding is dark?
khaisttj92 said:
first day i bought the phone has flicker when unlock tbe phone then send to samsung center they change the screen..then flicker still exist then send back again..they change motherboard then still flicker...then got software update flicker doesnt exist anymore..so i dont know about the screen..because i had change my screen earlier..btw did you have problem in greyish aod when your surronding is dark?
Click to expand...
Click to collapse
What is flicker? Like blinking? I don't experienced it. And software update?? I didn't get that until today. For aod I thought it happened because my eyeglasses a bit dirty but it is greyish. I try install always on amoled app on s6 phone and its clear. No greyish thing around it dude
Adityagiann said:
What is flicker? Like blinking? I don't experienced it. And software update?? I didn't get that until today. For aod I thought it happened because my eyeglasses a bit dirty but it is greyish. I try install always on amoled app on s6 phone and its clear. No greyish thing around it dude
Click to expand...
Click to collapse
last year update december..j7 pro..because of aod greyish in the dark so i turn of aod
khaisttj92 said:
last year update december..j7 pro..because of aod greyish in the dark so i turn of aod
Click to expand...
Click to collapse
Ohh i bought this phone on 2 january. Is it really bother you?? ? it's not like you always do your activity in the dark place
Adityagiann said:
Ohh i bought this phone on 2 january. Is it really bother you?? ? it's not like you always do your activity in the dark place
Click to expand...
Click to collapse
it kill your battery and mybe will get other issu..not do activity inn dark place i mean when at night..before you sleep..
khaisttj92 said:
it kill your battery and mybe will get other issu..not do activity inn dark place i mean when at night..before you sleep..
Click to expand...
Click to collapse
Well with my aod on it survive 1 day full and i just realise on ehat you mean. Well the i see the difference when aod turn on and when i got Line(chat application) pop up
Adityagiann said:
Well with my aod on it survive 1 day full and i just realise on ehat you mean. Well the i see the difference when aod turn on and when i got Line(chat application) pop up
Click to expand...
Click to collapse
now u realise..that why im off my aod..if im using only at day and turn off at night
Adityagiann said:
Did anyone face a problem where the touch screen won't get clicked?
It happened sometimes to me when I was try to type and it always happen in the same spot and that is when I try to type "I"( this also happen right now btw ). Thx for the answer
Click to expand...
Click to collapse
Confirmed. So what would be the best way to solve this problem?
final_triumph said:
Confirmed. So what would be the best way to solve this problem?
Click to expand...
Click to collapse
You face this problem too? Well i bring my phone into samsung service center since it's the product disability (my sister face this problem too and ofc same phone)
Adityagiann said:
You face this problem too? Well i bring my phone into samsung service center since it's the product disability (my sister face this problem too and ofc same phone)
Click to expand...
Click to collapse
I see, yes I do. Will have to bring it to the repair center as well :/
final_triumph said:
I see, yes I do. Will have to bring it to the repair center as well :/
Click to expand...
Click to collapse
I suddenly regret my choice to bought this phone ?
Guys, just update and it will be fine. Last kernel included in january firmware fixed all bugs (aod grayishness, screen flickering etc.) You can flash Luxembourg firmware if you have carrier unlocked j730.
I the most times you just need to do factory reset