Related
Hi all,
Ive got an xtrons tda696 with android 4.4.4_22072015
I have root access but wanted to check if there is any firmware or roms I can use.
chip is the rk3188 and mcu is MTCB-HZC-V2.69
Ive looked at all the roms and firmware here but the mcu doesn't appear to be listed.
Any help or suggestions please
compbuilds said:
Hi all,
Ive got an xtrons tda696 with android 4.4.4_22072015
I have root access but wanted to check if there is any firmware or roms I can use.
chip is the rk3188 and mcu is MTCB-HZC-V2.69
Ive looked at all the roms and firmware here but the mcu doesn't appear to be listed.
Any help or suggestions please
Click to expand...
Click to collapse
hello, I have your stereo itself, how did you get the root ??
Inviato dal mio D6503 utilizzando Tapatalk
compbuilds said:
Hi all,
Ive got an xtrons tda696 with android 4.4.4_22072015
I have root access but wanted to check if there is any firmware or roms I can use.
chip is the rk3188 and mcu is MTCB-HZC-V2.69
Ive looked at all the roms and firmware here but the mcu doesn't appear to be listed.
Any help or suggestions please
Click to expand...
Click to collapse
I just installed this, http://forum.xda-developers.com/showpost.php?p=60591423&postcount=12068 and it all works beautifully !! does not change the MCU !!
skizzo_d said:
I just installed this, http://forum.xda-developers.com/showpost.php?p=60591423&postcount=12068 and it all works beautifully !! does not change the MCU !!
Click to expand...
Click to collapse
Hi Glad you managed to get it sorted out.
For root I used the a password which I found on here,but after looking for it again I cant find the thread.
Root gave me the abd shell and then I installed super user.
Reboot and installed root checker to confirm.
Pleased you managed to flash yours but which ver from the link did you use
Did you use the one for 800x480 or can you give the link directly to the download.
I just want to make sure that I install the correct one with no mistakes
Are these the download that you used dated sept 2015??
Download 800X480 with NEXT Launcher: https://yadi.sk/d/AAqeafAvixzHp
Download 800X480 with regular launcher: https://yadi.sk/d/UFXsA6pLixBoq
Thanks
compbuilds said:
Hi all,
Ive got an xtrons tda696 with android 4.4.4_22072015
I have root access but wanted to check if there is any firmware or roms I can use.
chip is the rk3188 and mcu is MTCB-HZC-V2.69
Ive looked at all the roms and firmware here but the mcu doesn't appear to be listed.
Any help or suggestions please
Click to expand...
Click to collapse
compbuilds said:
Hi Glad you managed to get it sorted out.
For root I used the a password which I found on here,but after looking for it again I cant find the thread.
Root gave me the abd shell and then I installed super user.
Reboot and installed root checker to confirm.
Pleased you managed to flash yours but which ver from the link did you use
Did you use the one for 800x480 or can you give the link directly to the download.
I just want to make sure that I install the correct one with no mistakes
Are these the download that you used dated sept 2015??
Download 800X480 with NEXT Launcher: https://yadi.sk/d/AAqeafAvixzHp
Download 800X480 with regular launcher: https://yadi.sk/d/UFXsA6pLixBoq
Thanks
Click to expand...
Click to collapse
yes, 800x480, extract the file "update.iso" and put it in sd_GPS and in settings / system information, updates. after upgrading to Android, restore factory settings and erases data
skizzo_d said:
yes, 800x480, extract the file "update.iso" and put it in sd_GPS and in settings / system information, updates. after upgrading to Android, restore factory settings and erases data
Click to expand...
Click to collapse
Have you found any issue's or problems with the firmware as we seem to be the only users who have this unit.
Also what did you use to make a backup
Thanks for your help
All installed and up and running thanks
But have a problem Lost my 16gig nandflash though.
Any help on this one please
compbuilds said:
All installed and up and running thanks
But have a problem Lost my 16gig nandflash though.
Any help on this one please
Click to expand...
Click to collapse
what does it mean? you lost files? or memory is smaller? or do not see it right ?? did you do the factory reset ??
Inviato dal mio D6503 utilizzando Tapatalk
skizzo_d said:
what does it mean? you lost files? or memory is smaller? or do not see it right ?? did you do the factory reset ??
Inviato dal mio D6503 utilizzando Tapatalk
Click to expand...
Click to collapse
Hi again.
flash memory had increased form 1 to 2 gig as expected but the memory in the unit is 16gig was no longer showing or accessible.
Also yes after flash I did factory reset.
So what I have done now is reflash the unit again but used the rom with next launcher built in and then factory reset.
Full memory is now visible and usable.
I have noticed that my obd software will not find the blooth elm even though it is paired, I will have a play around with today to see if I can find the problem.
Also did you make a note of your units factory settings?? Maybe that could be the Bluetooth issue with obd.
Thanks again and I'm glad somebody else has the same unit as me so now I don't feel alone
https://drive.google.com/folder/d/0B1BfJCD_1o9Gd2VNYzdVVHhiWnc/edit
skizzo_d said:
https://drive.google.com/folder/d/0B1BfJCD_1o9Gd2VNYzdVVHhiWnc/edit
Click to expand...
Click to collapse
Many thanks
I took pictures myself of all other settings but forgot about the factory settings.
Because it seems we are the only two that has the unit so far what do you think about it.
I changed from a pioneer appradio to have this instead.
So far I don't regret the choice
I feel too late to find this thread but...
Don't flash Malaysk ROM on Xtrons HU with MTCB-HZC.
Obviously they have fatal issue at screen backlight.
I confirmed same issue on TD696A and TD101A both of them.
Dear Users,
I have an Xtrons TD696A MTCB-HZC-v2.65 with current buildnumber rk3188-eng.4.4.4 22102015.20.28.27.
I'd like to install the Malaysk image on my unit but before I do this I would like to know a few things:
1). First I have to get root access on my device and install the application SuperSU (I have managed to do this)
2). After that I have to create a back-up but which application is the best to do this?
I have tried nandroid but it gives me an error 127.
Changing the shell did not make any difference.
Do I have to install busy box for this?
I have also red that making a back-up of a device is normaly done by booting the device with a rom manager.
But which rom manager could I youse for my Xtrons unit?
3). Could I install update_4_4_4_FUSE_800X480_RK3188_15_MAL_23_04_2016.rar on this unit?
After expanding the rar file I have red the readme file but I'm not sure which method is the best method to choose:
* Installing from the system
* Installing from Recovery
4). Are there any other steps that I have to make or have to know or do before I'm going to flash my unit?
Please help me so I could use the incredible Malaysk rom.
Kind regards,
Kenneth de Vries
Hello Guys
I need some help in flashing my device. I was going to try and flash my head unit today and tried a few things and now i cant even run the restore factory defaults. Well it runs and runs and runs and tells me not to restart the head unit but nothing happens so i switch off and on and its still good. In short i broke it.
The unit switches on and loads up fine but the wifi is all messed up i have to specify ip address to get anything to work.
My aim here is to flash to kitkat if not possible then back to factory. I managed to find this web site with firmware for my radio apparently. I cant find any instructions on how to do the update or do any kind of serial number matching or any kind of identification to avoid flashing wrong. I cannot post the link If you google kr-6206 Firmware its the first link and its by a website firmware-portal. I have registered to there site but cant find any kind of help or contact us. Even tho they say to contact them.
Radio details :
Android 4.2.2
MCU: 4.3.8-11-10-450101 WV(4.3.8, RDS, AD, BC6, Rohm37XXX, TEF662X)
System Version: 2.7.39
1.5GHZ Dual Core Cortex: A9
Ram 1GB DD3
8GB
Car DVD
GPS
TFT LCD 800*480 Screen
For SUBARU FORESTER Impreza 08-10
Bought on ebay in 2014
I realize this question must have been asked but not for this radio. If there is a good guide someone can recommend and also if someone can tell me if i can use the files i downloaded to try restore my radio to a proper working radio. Its really frustrating. I dont wanna brick the radio
Thank you for any help in advance
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
D3LTA said:
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
Click to expand...
Click to collapse
Thank you so much the king root managed to root my device. The only thing is none of those radios look just like mine. One very similar but not 100%.
The supplier from eBay sent me the software files but it dose not update android. Still stuck on 4.2.2. Im afraid to update. I need to figure out how to make a backup first before trying.
All and all the radio works now but no audio from the on board amp im guessing the power IC is fried.
Will keep you guys posted and thank you for the help
D3LTA said:
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
Click to expand...
Click to collapse
So the Agent sent me this. V2.9.5_20150513_800X480_SYSTEM_KED.rar. Its only 174.91M and contains 2 files. It did not update Android to higher version just the system version should i use the Version (2.9.1 800x480 - Most likely default software taken from AN-21U
@mxv68 - V2.9.1_20141217_800X480_SYSTEM_KED.rar) From the XDA forum will that work. Sorry to be so noob at this. First android device .
They have really not made this uncomplicated.
Try to use the navi IQ software from the 4pda forum, it's a hybrid rom.. it updates just Android so if it doesn't boot I can always go back if u have the old files.. with Phoenix suit u can make a backup.. but I didn't try it.
D3LTA said:
Try to use the navi IQ software from the 4pda forum, it's a hybrid rom.. it updates just Android so if it doesn't boot I can always go back if u have the old files.. with Phoenix suit u can make a backup.. but I didn't try it.
Click to expand...
Click to collapse
Thank you
I will only be able to check this out in a weeks time. I am going to be away. Will let you know as soon as im able to test.
Hi I followed lots of guides for the new Oreo update as it wasn't downloading automatically.
Got latest KDZ from here:
https://lg-firmwares.com/lg-vs995-firmwares/firmwares/
Flashed it with LGUP - now I have no phone radio - though wifi and bluetooth are working.
Any idea how I can fix this ?
Did I use the right version of LG UP ? I have tried downgrading KDZs but these also dont have working radios ?
Any idea how I can fix this ?
Thanks,
Rob
Could this be because my phone is VS995S
- when I check IMEI.
Rom I have installed is VS995
I have tried to install others with LGUP - but downgrades dont seem to work.
Ideas ? Anyone have an S qho can share a ROM ?
Anyone?
I don't think the S means anything special regarding firmware. I believe that just means the phone is the silver Verizon version.
Someone correct me if I'm wrong...
pistacios said:
I don't think the S means anything special regarding firmware. I believe that just means the phone is the silver Verizon version.
Someone correct me if I'm wrong...
Click to expand...
Click to collapse
what comes up when you check IMEI, *#06#? is it correct?
ozkaya said:
what comes up when you check IMEI, *#06#? is it correct?
Click to expand...
Click to collapse
It says can't find your current country.
What does this mean ?
If I go into settings the IMEI is correct.
I suspect problem might be as I am in the UK and this phone was obtained from an e-bay seller in Asia I think they flashed something strange which is why it wouldnt update to oreo by itself and why the standard kdz broke it.
Still would like to fix it so it works as a phone again.
i95swervin said:
They probably modified the partitions a bit. My guess is they used a modem from another carrier to get it working.
My advise is for you to downgrade back to nougat and see if the problem persists.
Using a carrier branded usa phone outside of its network brings it's own problems if your carrier doesnt support the proper bands needed.
Click to expand...
Click to collapse
I tried that, and the problem does persist.
Any ideas on how to fix ?
Hello, I have DZ09 with MT6250 chip. Smartwatch have bluetooth and bt dialer but I don't have those apps, calibration code #*0123# shows:
imgur.com/g23THgk
this means BT driver is not loaded?
I tried to flash another ROM but I cant . I read lot of topic on XDA and what I have achived:
- readback mine ROM
- I'm able flash mine ROM only and nothing else :/
Maybe someone could help me or explain how to flash different ROM or maybe there is a way to install missing BT apps .
Link to mine ROM: www83.zippyshare.com/v/oK7rMFyG/file.html
Thanks in advice!
Hi,
I have the same watch and the same issue with Bluetooth.
Do you finf a solution?
Xavier
No :-/
Sp3cyfik said:
Hello, I have DZ09 with MT6250 chip. Smartwatch have bluetooth and bt dialer but I don't have those apps, calibration code #*0123# shows:
imgur.com/g23THgk
this means BT driver is not loaded?
I tried to flash another ROM but I cant . I read lot of topic on XDA and what I have achived:
- readback mine ROM
- I'm able flash mine ROM only and nothing else :/
Maybe someone could help me or explain how to flash different ROM or maybe there is a way to install missing BT apps .
Link to mine ROM: www83.zippyshare.com/v/oK7rMFyG/file.html
Thanks in advice!
Click to expand...
Click to collapse
Firmware K50-HYBR-V06.577-1225 does not have bluetooth application. You need download and flash K50-WB-V06_1282-0103.
Slavich90 said:
Firmware K50-HYBR-V06.577-1225 does not have bluetooth application. You need download and flash K50-WB-V06_1282-0103.
Click to expand...
Click to collapse
Do you link the firmware?
here you are
I everybody, i have this model, is JUNSUN, and i want to know if its possible to root and install fcc launcher, thanks in advance.
navi91 said:
I everybody, i have this model, is JUNSUN, and i want to know if its possible to root and install fcc launcher, thanks in advance.
Click to expand...
Click to collapse
broken photo
Inviato dal mio ONEPLUS A6003 utilizzando Tapatalk
sorry now its ok
navi91 said:
I everybody, i have this model, is JUNSUN, and i want to know if its possible to root and install fcc launcher, thanks in advance.
Click to expand...
Click to collapse
You can root it, i rooted my junsun 2gb / 32gb.
Check the root instructions for the joying sc9853i, there is a manual (developer.zip).
I don't had the luck to get an update file from supplier.... but I found a matching update file for the junsun unit.
I can upload the K924B-91212 firmware which I have rooted, if you want.
tchleb said:
You can root it, i rooted my junsun 2gb / 32gb.
Check the root instructions for the joying sc9853i, there is a manual (developer.zip).
I don't had the luck to get an update file from supplier.... but I found a matching update file for the junsun unit.
I can upload the K924B-91212 firmware which I have rooted, if you want.
Click to expand...
Click to collapse
I only want root it, i'm now in android 9.0, sc9853i root joying is valid also for mine? Thanks
navi91 said:
I only want root it, i'm now in android 9.0, sc9853i root joying is valid also for mine? Thanks
Click to expand...
Click to collapse
On fake 9.0 in real it is android 8.1
For rooting you need an valid bootloader image. This you will found in the update file from the supplier. You need to patch the boot image with magisk and flash the patched image back.
tchleb said:
On fake 9.0 in real it is android 8.1
For rooting you need an valid bootloader image. This you will found in the update file from the supplier. You need to patch the boot image with magisk and flash the patched image back.
Click to expand...
Click to collapse
ops, i didn't know that:crying:, ok i will ask from the supplier, Would there be a possibility to install youtube vanced? always give me an error.
navi91 said:
ops, i didn't know that:crying:, ok i will ask from the supplier, Would there be a possibility to install youtube vanced? always give me an error.
Click to expand...
Click to collapse
It's possible to install the yt vanced. I use it on my junsun unit.
If I remember right you need to use the Legacy version. I had also problems to install it...
tchleb said:
It's possible to install the yt vanced. I use it on my junsun unit.
If I remember right you need to use the Legacy version. I had also problems to install it...
Click to expand...
Click to collapse
wuo!! legacy it's ok, thanks!!!
tchleb said:
You can root it, i rooted my junsun 2gb / 32gb.
Check the root instructions for the joying sc9853i, there is a manual (developer.zip).
I don't had the luck to get an update file from supplier.... but I found a matching update file for the junsun unit.
I can upload the K924B-91212 firmware which I have rooted, if you want.
Click to expand...
Click to collapse
Hi,
My unit is Junsun V1 Pro 4GB/64GB.
Did you manage to upgrade the firmware?
Do you know if the Joying sc9853i firmware matches Junson?
grzech666 said:
Hi,
My unit is Junsun V1 Pro 4GB/64GB.
Did you manage to upgrade the firmware?
Do you know if the Joying sc9853i firmware matches Junson?
Click to expand...
Click to collapse
No I don't upgraded my firmware, I only wanted root permissions.
Check @surfer63 post he wrote that it should possible to upgrade to joying / teyes firmware.
Before that try I would make an backup of the single partitions.
tchleb said:
No I don't upgraded my firmware, I only wanted root permissions.
Check @surfer63 post he wrote that it should possible to upgrade to joying / teyes firmware.
Before that try I would make an backup of the single partitions.
Click to expand...
Click to collapse
Hey, tchleb. That sounds interesting about the Teyes firmware. I went and saw a page for their unit. It looks like theirs comes with a front DVR cam app that also has ADAS (lane detection collision warning).
Do you know if there's somewhere I can find out more about that? I can't find any ADAS app that will let me use one of the USB DVR cams. All the ones I can find seem to be designed only for phones and want to use the built-in internal camera of a phone to work.
What's your name, by the way? I'd like to address you with something that sounds like a name. ?
I'm Stephen.
LunaEros said:
Hey, tchleb. That sounds interesting about the Teyes firmware. I went and saw a page for their unit. It looks like theirs comes with a front DVR cam app that also has ADAS (lane detection collision warning).
Do you know if there's somewhere I can find out more about that? I can't find any ADAS app that will let me use one of the USB DVR cams. All the ones I can find seem to be designed only for phones and want to use the built-in internal camera of a phone to work.
What's your name, by the way? I'd like to address you with something that sounds like a name. ?
I'm Stephen.
Click to expand...
Click to collapse
I would say 4pda is the right place for that.
I don't know if it's possible to use the ADAS App from the Teyes firmware.
Hi guys,
do you also have a bluetooth problem? I have one that I can only pair one device at a time. In addition, it happens that after pairing the phone, all contacts are lost.
I asked the seller for a new soft, he sent me ver. K989B, in theory this ver.is for Yunsun 4G 4/64, but when I compare it with ver. K924B both are identical except the config.txt file in the main folder:
K989B:
Code:
#test
sys.fyt.bluetooth_type = 1
com.fyt.android.firmare.version = 9.0
K924B:
Code:
#test
sys.fyt.bluetooth_type = 0
com.fyt.android.firmare.version = 9.0
I'm a little afraid to use the software I received.
grzech666 said:
Hi guys,
do you also have a bluetooth problem? I have one that I can only pair one device at a time. In addition, it happens that after pairing the phone, all contacts are lost.
I asked the seller for a new soft, he sent me ver. K989B, in theory this ver.is for Yunsun 4G 4/64, but when I compare it with ver. K924B both are identical except the config.txt file in the main folder:
K989B:
K924B:
I'm a little afraid to use the software I received.
Click to expand...
Click to collapse
Your both problems are common known problems, for more infos read @surfer63 faq.
Can you please post a Screenshot from your complete systeminfo here, maybe I have an update / or the same version to downgrade it if the new fw will not fit.
tchleb said:
Can you please post a Screenshot from your complete systeminfo here, maybe I have an update / or the same version to downgrade it if the new fw will not fit.
Click to expand...
Click to collapse
Thanks for helping, please find attached screenshots,
@ grzech666 Thank you very much for the firmware, the devices are identical.
Although my device is updated to date 29-2-2020, makes me think if that could be the reason for your problems with OBD contacts and connection?
continue with the problem ?.
Have you tried checking for updates through the device?.
Regards, and thank you very much.
Mine is dated 2020-04-09 and the only different I see is the Bluetooth version, 8.1.7-27_Built-in and MCU 19.12.24 13:49:27 NOR_53_L82_G23P48F64_V:1.0_FYT
OBD connection work together with phone, did not switch it on in settings.
Bluetooth contact sync did wipe out my Google contacts, I have restored them and turned off Google sync.
Bună, pozele postate sunt de calitate slabă. Nu se pot vedea specificațiile.
Pune alte poze, te rog.
Mulțumiri.