Database Users

Rooting my Pumpkin Android rckPX2 4.4.4

Hi, fellows
I have tried to root my head unit using: KingRoot, TowelRoot, Root Master etc and every single one failed. It is something that I am doing wrong? or it is not possible.
Please help!

Aparently, not possible...

What is a "Pumpkin Android rckPX2 4.4.4?" Searching for rckPX2 on the Pumpkin website turns up nothing.

My unit is this one on their website LM-C0676-US-A GeneralS: Android 4.4 Kit KatCPU: Rockchip PX2 Cortex A9 Dual Core 1.4GHzRAM: DDR3 1GBNand Memory: 8GBAudio output: 4*45W maxScreen Resolution: 800*480 Cold Boot time: about 25-30s - See more at: http://www.autopumpkin.com/car-dvd-...-control-for-toyota.html#sthash.FlVuWSf2.dpuf

Mike the Rockchip 3066 and the Rockchip PX3 seems to be the same processor just that the 3066 is used only in consumer products and the PX2 is used for consumer products and industrial applications.
I did post the link to both processors PDF to see if somebody can compare them and determine if I can use the Malaysk room with my unit.
Thanks for your help!

Sorry is PX2 not PX3.

The first 2 characters of Pumpkin model numbers indicate the OEM. I don't know who "LM" is, but it's not one of the known manufacturers of HuiFei type units. So, Malaysk's firmware is very unlikely to work.

mike.s said:
The first 2 characters of Pumpkin model numbers indicate the OEM. I don't know who "LM" is, but it's not one of the known manufacturers of HuiFei type units. So, Malaysk's firmware is very unlikely to work.
Click to expand...
Click to collapse
Mike I was told by Pumpkin that my unit is made by Senzchen Winmark Electronics Ltd in China. I went to their website and they sell my unit under a different part number DQ6514

mike.s said:
The first 2 characters of Pumpkin model numbers indicate the OEM.
Click to expand...
Click to collapse
Do you know were I can find more info about that? I'm really with itches to flash Malaysk's firmware in my AL-C0241 or AL-5701 (they are the same unit) and I really would love to have the original firmware to put back if something goes wrong...

Unfortunately I have not being able to find a workaround solution yet. I want to flash Malaysk rom like you but I do not want to brick the unit so I keep looking and asking for help. I have read and being told the following:
a) You need to be rooted to be able to backup your original rom.
b) You cannot go back to 4.2 either.
So the only solution is to find someone that can look in my case to both processors the rk3066 and rkpx2 and respond yes they are the same go ahead and do it.

Georgetech said:
Unfortunately I have not being able to find a workaround solution yet. I want to flash Malaysk rom like you but I do not want to brick the unit so I keep looking and asking for help. I have read and being told the following:
a) You need to be rooted to be able to backup your original rom.
b) You cannot go back to 4.2 either.
So the only solution is to find someone that can look in my case to both processors the rk3066 and rkpx2 and respond yes they are the same go ahead and do it.
Click to expand...
Click to collapse
How I understand you! But in my case I have the same CPU and display

nleitao said:
Do you know were I can find more info about that? I'm really with itches to flash Malaysk's firmware in my AL-C0241 or AL-5701 (they are the same unit) and I really would love to have the original firmware to put back if something goes wrong...
Click to expand...
Click to collapse
I just checked your unit in Pumpkin website and it has the rk3188 processor. Malaysk rom is for the rk3188 and 3066. If the only requirement to flash this rom is just about the processor then you should be fine but I do not know this, maybe somebody else in this forum could help with answers.

Georgetech said:
If the only requirement to flash this rom is just about the processor then you should be fine but I do not know this, maybe somebody else in this forum could help with answers.
Click to expand...
Click to collapse
I believe it's not the only but it's the most important. Come on guys, enlight the nooblets here!!! :angel:

Malaysk's firmware is meant for HuiFei type units. It is not known to work with others, even if they happen to use the same processor.
For instance, the Winlink/Ownice units (they have their own thread) will not work with Malaysk's firmware, even though some use the RK3188 and have the same resolution as some HuiFei type units.

thanks for your input Mike! this is the input that was missing.
that means I MUST put my fingers on my original firmware before try a rooted image.
Thanks again
Nuno

mike.s said:
Malaysk's firmware is meant for HuiFei type units. It is not known to work with others, even if they happen to use the same processor.
For instance, the Winlink/Ownice units (they have their own thread) will not work with Malaysk's firmware, even though some use the RK3188 and have the same resolution as some HuiFei type units.
Click to expand...
Click to collapse
Thanks Mike!
That closes this chapter. Next option is to learn how to code.
Thanks
Georgetech

Some posts moved to new thread:
http://forum.xda-developers.com/android-auto/android-head-units/al-c0241-al-5701-t3229364

My 2 cents
I would just try to install the rk3066 version of the ROM and see if it works. I don't think you will have a problem, it should work.
I accidentally was trying to install the wrong one on my radio and it just didn't install didn't mess anything up.
Unzip the Rom and put it on a SD card with nothing else on it.
Put the SD card into the GPS sd card slot while the headunit is on and it will pop up a box saying it found a update or something and
just reboot the until and it should start installing it.
Well at least this worked on mine. Just do it you don't need the old ROM. Hope this helps

Hi all, I've a similiar car unit, same CPU, same screen resolution, I've found a link to sownload an original rom:
http://www.autopumpkin.com/pumpkin-...i-odb2-steering-wheel-control-for-toyota.html
and here direct link:
https://mega.nz/#F!UE9ElapD!A-uTerI11qQ86r2ModVnyg
inside there are both firmware and mcu, but I didn't find something to dump it to explore system files, from images seem to be better than MCU I have mounted on mine (specific Fiat Punto Evo car unit), I cannot Root it, cannot install CWM (bad update.zip message!), please, there is someone that can suggest me with (if there are) utility to use to dump it? it will be interesting also to investigate about it, to try to find some easy ways to root kk 4.4.4 rockchip px2 devices.
Thanks in advances.
here some sources: (JB)
http://www.marsboard.com/marsboard_rk3066_download.html

I rooted mine very easy with couple key presses. There is a youtube video of it, takes 30 seconds

KR-6206 Kaier

Hello Guys
I need some help in flashing my device. I was going to try and flash my head unit today and tried a few things and now i cant even run the restore factory defaults. Well it runs and runs and runs and tells me not to restart the head unit but nothing happens so i switch off and on and its still good. In short i broke it.
The unit switches on and loads up fine but the wifi is all messed up i have to specify ip address to get anything to work.
My aim here is to flash to kitkat if not possible then back to factory. I managed to find this web site with firmware for my radio apparently. I cant find any instructions on how to do the update or do any kind of serial number matching or any kind of identification to avoid flashing wrong. I cannot post the link If you google kr-6206 Firmware its the first link and its by a website firmware-portal. I have registered to there site but cant find any kind of help or contact us. Even tho they say to contact them.
Radio details :
Android 4.2.2
MCU: 4.3.8-11-10-450101 WV(4.3.8, RDS, AD, BC6, Rohm37XXX, TEF662X)
System Version: 2.7.39
1.5GHZ Dual Core Cortex: A9
Ram 1GB DD3
8GB
Car DVD
GPS
TFT LCD 800*480 Screen
For SUBARU FORESTER Impreza 08-10
Bought on ebay in 2014
I realize this question must have been asked but not for this radio. If there is a good guide someone can recommend and also if someone can tell me if i can use the files i downloaded to try restore my radio to a proper working radio. Its really frustrating. I dont wanna brick the radio
Thank you for any help in advance

it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good

D3LTA said:
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
Click to expand...
Click to collapse
Thank you so much the king root managed to root my device. The only thing is none of those radios look just like mine. One very similar but not 100%.
The supplier from eBay sent me the software files but it dose not update android. Still stuck on 4.2.2. Im afraid to update. I need to figure out how to make a backup first before trying.
All and all the radio works now but no audio from the on board amp im guessing the power IC is fried.
Will keep you guys posted and thank you for the help

D3LTA said:
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
Click to expand...
Click to collapse
So the Agent sent me this. V2.9.5_20150513_800X480_SYSTEM_KED.rar. Its only 174.91M and contains 2 files. It did not update Android to higher version just the system version should i use the Version (2.9.1 800x480 - Most likely default software taken from AN-21U
@mxv68 - V2.9.1_20141217_800X480_SYSTEM_KED.rar) From the XDA forum will that work. Sorry to be so noob at this. First android device .
They have really not made this uncomplicated.

Try to use the navi IQ software from the 4pda forum, it's a hybrid rom.. it updates just Android so if it doesn't boot I can always go back if u have the old files.. with Phoenix suit u can make a backup.. but I didn't try it.

D3LTA said:
Try to use the navi IQ software from the 4pda forum, it's a hybrid rom.. it updates just Android so if it doesn't boot I can always go back if u have the old files.. with Phoenix suit u can make a backup.. but I didn't try it.
Click to expand...
Click to collapse
Thank you
I will only be able to check this out in a weeks time. I am going to be away. Will let you know as soon as im able to test.

A-Sure S3 - 5.1.1 Intel head unit KYD - How to root and rom update.

After a lot of time trying to find out more about this unit, I thought I would create a thread and start it off with what I now know.
The unit is similar to the Joying unit, it uses the Intel processor and is non mcd. The manufacture is Kaiyide (KYD) the rom is again similar to the joying but not quite the same.
Passwords are 3368 for the main car settings and 0808 to change launcher. There is a password for something to do with the door locking, which I dont know.
Root is achieved the same way as the joying using the method posted by MMTK84 https://forum.xda-developers.com/showpost.php?p=69648860&postcount=84&nocache=1&z=8361786322568856
The latest rom is available using the link below, extract the folders and load content into root on on a usb stick put it into the unit and it will auto detect and update.
https://mail.qq.com/cgi-bin/ftnExs_...18440714350f&t=exs_ftn_download&code=0c66ff52
When i installed the rom, I used the apps and boot animation from the latest Joying rom download both have installed correctly. Im unable to load the mcu update as it searches the manufactures info and as its not JY it wont update. If anyone can help with this I would like to try it as the MCU software is a lot older than the Joying. Can this be achieved by editing the build.prop file?
Please add to this thread and edit as necessary. I hope this helps A-Sure unit owners as the information is very difficult to find.

Hi,
Thanks for this post.
can i manuelly flashen? the auto flash not work by me.
i have extract the package and copy on the usb stck(fat32)
abload.de/img/img_20170407_143842g1u2p.jpg
thanks
Ps:sorry for my bad english

New user
Hi Rick,
I'm interested in making this thread too, there seems to be no resources for this unit whatsoever.
Have just purchased an A-sure unit, ball ache trying to figure it all out without a manual. Although, A-Sure have now sent me one.
Have updated the ROM with your help, looks quite a bit different now.
I'm not a developer, more of a meddler, am too old now to take it in like I once did.
Cheers for now,
Alan.

Hi Alan, thank you for adding to the thread! You are quite right there is almost no information available for the A-Sure unit. Fortunately the information can be put together from various threads here on the XDA forum. But having it in one place makes sense.
I know exactly where you are coming from and I am the same more meddler than developer and also a lot older than when i used to install car audio and security for a profession. Im pleased that you found my info useful.
I would very much like to modify the DAB app so that it shows the station logos - or use another one if anyone knows an app that will work.
I have updated the iGO app on my unit - ugh took me a while to get it working. for that you need root access.
Most of the issues are now cured on my unit, I just have a problem with loosing gps when going between apps ie from iGo to poweramp and back (music player - way way better then stock app)
Best regards
Rick.

extract the package then open the first folder / second until you see a group of files, put those onto the fat32 usb stick and then try to update
ichhalt88 said:
Hi,
Thanks for this post.
can i manuelly flashen? the auto flash not work by me.
i have extract the package and copy on the usb stck(fat32)
abload.de/img/img_20170407_143842g1u2p.jpg
thanks
Ps:sorry for my bad english
Click to expand...
Click to collapse

Hi Rick, I also have a S3 unit of A-Sure (Intel sofia, 1GB, 16GB, WiFi Version). It looks like that A-sure offers currently no updates. I wrote 12 emails with no satisfactory answer to my questions. The system of A-Sure is very bad translated in German and contains many software problems. I would also like to update my system, as you have done it. Unfortunately the download link is offline. Can you put it online again? I have the S3 unit with the physical buttons. This information is based in the MCU, isn´t it? The android System is the same one? Can I set the Android system in German?
Thank you very much.

Rom Offline?
Cant download the File

YorkshireGrilla said:
Hi Rick,
I'm interested in making this thread too, there seems to be no resources for this unit whatsoever.
Have just purchased an A-sure unit, ball ache trying to figure it all out without a manual. Although, A-Sure have now sent me one.
Have updated the ROM with your help, looks quite a bit different now.
I'm not a developer, more of a meddler, am too old now to take it in like I once did.
Cheers for now,
Alan.
Click to expand...
Click to collapse
Pls upload the Firmware. Original link Down

WTF, no answer

Because no one answer here, I tried to update the ROM on myself. I have downloaded the ROM of Joying 20170328 and unpacked. I Have deleted the directory MCU, and the files 0308 STM8UD.BIN and STM8_PROJECT cov.s19 (I read that must be the original of A-Sure). I copy the files on a SD card and put it into the GPS slot. Unit is switched on and the update has started. After 10 minutes, on the screen was: Please remove SD card. I have done it. Nothing happens. Reset. Unit rebooted and has Android further installed. Then black screen. Reset again. Android starts, everything seems to work . In the info bar is in bold red font: MCU and UI do not fit together. Looks stupid ... But ok.
The physical keys work, only the DVD drive does not work. Apparently no driver in the Android system available. TOMTOM can not be installed (here you have to root the device and change the serial number). The translation of Chinese in German is clearly better than in A-Sure, in the radio app the RDS text is also no longer overlapping. More I have not tested yet, I'm glad that I have not shot the device.
I Think, i´m waiting for the offical update of A-Sure (if there will be one, I don´t think so...)
Yes, these were my first experiences.
Whether I would recommend it, I do not know.
Many advantages I have not recognized so far ...

Good news from A-Sure. They have a new firmware, directly to Android 6. No problems with updating, even TOMTOM works without routing and changing the ID...

Good news, thank you.
I have a problem with german text to speech in google navigation.
I tryed also the update to joying, but wifi didn't work.
Is there a download link for the update available?
Grettings from Hannover.

holzwuermchen76 said:
Good news from A-Sure. They have a new firmware, directly to Android 6. No problems with updating, even TOMTOM works without routing and changing the ID...
Click to expand...
Click to collapse
Hallo, wo bekomme ich das update?
Gruss

Fliesenleger said:
Hallo, wo bekomme ich das update?
Gruss
Click to expand...
Click to collapse
I would also like to know, please.:confuso::Boa:

Upgrade
I have used this upgrade, works perfectly but erases the IGO satnav.
I'd love to know how to put TomTom on this unit instead.
Alan.
My unit is an A Sure AS-S3A3 Picture in my Album, see profile.

I have updated my Asure Opel headunit Type S3OVG.
Before the update the text to speech from google navigation didn't work. There was also an update shown, but updatescreen crashes when opened.
Now, after the update, all seems to work.

I have updated my A-Sure Android 7 Zoll Unit.
All working.

where are you getting this update from ?
i have a a-sure and need to update

I got mine from holzwuermchen76 pm him.
Alan.
smileyuk said:
where are you getting this update from ?
i have a a-sure and need to update
Click to expand...
Click to collapse
---------- Post added at 08:31 PM ---------- Previous post was at 08:28 PM ----------
I got mine from holzwuermchen76
Pm him.
Alan.
smileyuk said:
where are you getting this update from ?
i have a a-sure and need to update
Click to expand...
Click to collapse

Please share the update link in this tread so it can be usefully with all A-Sure owners

[HELP] Root and Install FCC for sc9853

I everybody, i have this model, is JUNSUN, and i want to know if its possible to root and install fcc launcher, thanks in advance.

navi91 said:
I everybody, i have this model, is JUNSUN, and i want to know if its possible to root and install fcc launcher, thanks in advance.
Click to expand...
Click to collapse
broken photo
Inviato dal mio ONEPLUS A6003 utilizzando Tapatalk

sorry now its ok

navi91 said:
I everybody, i have this model, is JUNSUN, and i want to know if its possible to root and install fcc launcher, thanks in advance.
Click to expand...
Click to collapse
You can root it, i rooted my junsun 2gb / 32gb.
Check the root instructions for the joying sc9853i, there is a manual (developer.zip).
I don't had the luck to get an update file from supplier.... but I found a matching update file for the junsun unit.
I can upload the K924B-91212 firmware which I have rooted, if you want.

tchleb said:
You can root it, i rooted my junsun 2gb / 32gb.
Check the root instructions for the joying sc9853i, there is a manual (developer.zip).
I don't had the luck to get an update file from supplier.... but I found a matching update file for the junsun unit.
I can upload the K924B-91212 firmware which I have rooted, if you want.
Click to expand...
Click to collapse
I only want root it, i'm now in android 9.0, sc9853i root joying is valid also for mine? Thanks

navi91 said:
I only want root it, i'm now in android 9.0, sc9853i root joying is valid also for mine? Thanks
Click to expand...
Click to collapse
On fake 9.0 in real it is android 8.1
For rooting you need an valid bootloader image. This you will found in the update file from the supplier. You need to patch the boot image with magisk and flash the patched image back.

tchleb said:
On fake 9.0 in real it is android 8.1
For rooting you need an valid bootloader image. This you will found in the update file from the supplier. You need to patch the boot image with magisk and flash the patched image back.
Click to expand...
Click to collapse
ops, i didn't know that:crying:, ok i will ask from the supplier, Would there be a possibility to install youtube vanced? always give me an error.

navi91 said:
ops, i didn't know that:crying:, ok i will ask from the supplier, Would there be a possibility to install youtube vanced? always give me an error.
Click to expand...
Click to collapse
It's possible to install the yt vanced. I use it on my junsun unit.
If I remember right you need to use the Legacy version. I had also problems to install it...

tchleb said:
It's possible to install the yt vanced. I use it on my junsun unit.
If I remember right you need to use the Legacy version. I had also problems to install it...
Click to expand...
Click to collapse
wuo!! legacy it's ok, thanks!!!

tchleb said:
You can root it, i rooted my junsun 2gb / 32gb.
Check the root instructions for the joying sc9853i, there is a manual (developer.zip).
I don't had the luck to get an update file from supplier.... but I found a matching update file for the junsun unit.
I can upload the K924B-91212 firmware which I have rooted, if you want.
Click to expand...
Click to collapse
Hi,
My unit is Junsun V1 Pro 4GB/64GB.
Did you manage to upgrade the firmware?
Do you know if the Joying sc9853i firmware matches Junson?

grzech666 said:
Hi,
My unit is Junsun V1 Pro 4GB/64GB.
Did you manage to upgrade the firmware?
Do you know if the Joying sc9853i firmware matches Junson?
Click to expand...
Click to collapse
No I don't upgraded my firmware, I only wanted root permissions.
Check @surfer63 post he wrote that it should possible to upgrade to joying / teyes firmware.
Before that try I would make an backup of the single partitions.

tchleb said:
No I don't upgraded my firmware, I only wanted root permissions.
Check @surfer63 post he wrote that it should possible to upgrade to joying / teyes firmware.
Before that try I would make an backup of the single partitions.
Click to expand...
Click to collapse
Hey, tchleb. That sounds interesting about the Teyes firmware. I went and saw a page for their unit. It looks like theirs comes with a front DVR cam app that also has ADAS (lane detection collision warning).
Do you know if there's somewhere I can find out more about that? I can't find any ADAS app that will let me use one of the USB DVR cams. All the ones I can find seem to be designed only for phones and want to use the built-in internal camera of a phone to work.
What's your name, by the way? I'd like to address you with something that sounds like a name. ?
I'm Stephen.

LunaEros said:
Hey, tchleb. That sounds interesting about the Teyes firmware. I went and saw a page for their unit. It looks like theirs comes with a front DVR cam app that also has ADAS (lane detection collision warning).
Do you know if there's somewhere I can find out more about that? I can't find any ADAS app that will let me use one of the USB DVR cams. All the ones I can find seem to be designed only for phones and want to use the built-in internal camera of a phone to work.
What's your name, by the way? I'd like to address you with something that sounds like a name. ?
I'm Stephen.
Click to expand...
Click to collapse
I would say 4pda is the right place for that.
I don't know if it's possible to use the ADAS App from the Teyes firmware.

Hi guys,
do you also have a bluetooth problem? I have one that I can only pair one device at a time. In addition, it happens that after pairing the phone, all contacts are lost.
I asked the seller for a new soft, he sent me ver. K989B, in theory this ver.is for Yunsun 4G 4/64, but when I compare it with ver. K924B both are identical except the config.txt file in the main folder:
K989B:
Code:
#test
sys.fyt.bluetooth_type = 1
com.fyt.android.firmare.version = 9.0
K924B:
Code:
#test
sys.fyt.bluetooth_type = 0
com.fyt.android.firmare.version = 9.0
I'm a little afraid to use the software I received.

grzech666 said:
Hi guys,
do you also have a bluetooth problem? I have one that I can only pair one device at a time. In addition, it happens that after pairing the phone, all contacts are lost.
I asked the seller for a new soft, he sent me ver. K989B, in theory this ver.is for Yunsun 4G 4/64, but when I compare it with ver. K924B both are identical except the config.txt file in the main folder:
K989B:
K924B:
I'm a little afraid to use the software I received.
Click to expand...
Click to collapse
Your both problems are common known problems, for more infos read @surfer63 faq.
Can you please post a Screenshot from your complete systeminfo here, maybe I have an update / or the same version to downgrade it if the new fw will not fit.

tchleb said:
Can you please post a Screenshot from your complete systeminfo here, maybe I have an update / or the same version to downgrade it if the new fw will not fit.
Click to expand...
Click to collapse
Thanks for helping, please find attached screenshots,

@ grzech666 Thank you very much for the firmware, the devices are identical.
Although my device is updated to date 29-2-2020, makes me think if that could be the reason for your problems with OBD contacts and connection?
continue with the problem ?.
Have you tried checking for updates through the device?.
Regards, and thank you very much.

Mine is dated 2020-04-09 and the only different I see is the Bluetooth version, 8.1.7-27_Built-in and MCU 19.12.24 13:49:27 NOR_53_L82_G23P48F64_V:1.0_FYT
OBD connection work together with phone, did not switch it on in settings.
Bluetooth contact sync did wipe out my Google contacts, I have restored them and turned off Google sync.

Bună, pozele postate sunt de calitate slabă. Nu se pot vedea specificațiile.
Pune alte poze, te rog.
Mulțumiri.

HELP! Flased a YT9213AJ firmware on a YT9216B, Now I have black screen

Hello, I'm neewbie on this unit.
I have a YT9216B unit and I made a mistake flashing a YT9213AJ full fimware. Now my unit is on black screen and it does not conect with my PC. There is any way to flash it again with the correct firmware?
I have read a lot but I don't find the solution
Thank you so much

EL_SANTO said:
Hello, I'm neewbie on this unit.
I have a YT9216B unit and I made a mistake flashing a YT9213AJ full fimware. Now my unit is on black screen and it does not conect with my PC. There is any way to flash it again with the correct firmware?
I have read a lot but I don't find the solution
Thank you so much
Click to expand...
Click to collapse
You have bricked your unit. If you haven't done proper backup you will need to restore it from scratch. There is loads of info here on how to do it - https://forum.xda-developers.com/an...-firmware-chinese-7-head-unit-ac8227-t3931863
And once it's restored, flash it with this file which is by far the best mod I've seen here for your model.

SOLVED!!
Updated wuth a dump of yt9216b 16/1 ant then updated with full fimrare 16/2
Thanks

EL_SANTO said:
SOLVED!!
Updated wuth a dump of yt9216b 16/1 ant then updated with full fimrare 16/2
Thanks
Click to expand...
Click to collapse
You should probably use the proper YT9213AJ dump to recover your unit, even if other mods might work, you will encounter issues. I created the perfect mod for your unit (ROOT, TWRP, ViperFx, Android 9.1 Aug2020) and you can checkout the post here. I suggest you use it instead.

iceblue1980 said:
You should probably use the proper YT9213AJ dump to recover your unit, even if other mods might work, you will encounter issues. I created the perfect mod for your unit (ROOT, TWRP, ViperFx, Android 9.1 Aug2020) and you can checkout the post here. I suggest you use it instead.
Click to expand...
Click to collapse
But my unit is 2GB ram

In that case sorry

EL_SANTO said:
SOLVED!!
Updated wuth a dump of yt9216b 16/1 ant then updated with full fimrare 16/2
Thanks
Click to expand...
Click to collapse
Can you describe how you did it?