Hi I followed lots of guides for the new Oreo update as it wasn't downloading automatically.
Got latest KDZ from here:
https://lg-firmwares.com/lg-vs995-firmwares/firmwares/
Flashed it with LGUP - now I have no phone radio - though wifi and bluetooth are working.
Any idea how I can fix this ?
Did I use the right version of LG UP ? I have tried downgrading KDZs but these also dont have working radios ?
Any idea how I can fix this ?
Thanks,
Rob
Could this be because my phone is VS995S
- when I check IMEI.
Rom I have installed is VS995
I have tried to install others with LGUP - but downgrades dont seem to work.
Ideas ? Anyone have an S qho can share a ROM ?
Anyone?
I don't think the S means anything special regarding firmware. I believe that just means the phone is the silver Verizon version.
Someone correct me if I'm wrong...
pistacios said:
I don't think the S means anything special regarding firmware. I believe that just means the phone is the silver Verizon version.
Someone correct me if I'm wrong...
Click to expand...
Click to collapse
what comes up when you check IMEI, *#06#? is it correct?
ozkaya said:
what comes up when you check IMEI, *#06#? is it correct?
Click to expand...
Click to collapse
It says can't find your current country.
What does this mean ?
If I go into settings the IMEI is correct.
I suspect problem might be as I am in the UK and this phone was obtained from an e-bay seller in Asia I think they flashed something strange which is why it wouldnt update to oreo by itself and why the standard kdz broke it.
Still would like to fix it so it works as a phone again.
i95swervin said:
They probably modified the partitions a bit. My guess is they used a modem from another carrier to get it working.
My advise is for you to downgrade back to nougat and see if the problem persists.
Using a carrier branded usa phone outside of its network brings it's own problems if your carrier doesnt support the proper bands needed.
Click to expand...
Click to collapse
I tried that, and the problem does persist.
Any ideas on how to fix ?
Related
Here new ROM for Mozart
http://www.filefactory.com/file/b48..._1.28.111.03_5.52.09.16_22.33a.50_RELEASE.exe
DO NOT TRY TO FLASH THIS ROM FOR ANY OTHER DEVICE EXCEPT MOZART!
Enjoy!
THNX a LOT!
Hopefully it fixes my problems with sending text messages.
Will I lose my data (mainly my SMSes) if I install this update?
//EDIT -> according to several forums, I will lose my data...
and I haven't found any solution to backup my SMSes - yeah -.-
Is there anything I should regard or be aware of before updating?
//EDIT -> I just tried updating my phone and don't know how. It boots in the bootloader (RGB-test with some data on the device, SPL, the SD card, ...) just fine but the RUU doesn't find it.
I'm trying to flash it from a Windows XP machine - is there anything I have to take care of before I can flash it?
Or is there a real step-by-step manual for total dummies (I've flashed my HTC Diamond several times before without problems and have got no clue, why the PC won't find my Mozart).
The update process cancels with a CONNECTION ERROR [260].
will the hspa work on it from the tmobile usa after flashing this rom???
Invalid vender id
I have
INVALID VENDER ID
T-Mobile
Is there already a solution?
THX
nice greetings
Do you have the German T-Mobile version?
Mine flashed without any problems (after solving the driver problem...).
I have T-Mobile Austria.
but that this should be the same, right?
Greetings
Well, I'm not exactly sure.
However, if you think about the update failing with a wrong VENDOR ID - I guess it makes a difference.
FrozenLord said:
Do you have the German T-Mobile version?
Mine flashed without any problems (after solving the driver problem...).
Click to expand...
Click to collapse
are there any big noticable changes after flashing the new rom?
or is it just a minor security/stability update?
Be careful when uninstalling TMO apps
ROM is working very good, more fluent than stock version 1.25 - no problems found yet.
Still noticed the same problems with the stock ROM after uninstalling TMO shipped apps. When I uninstall Navigon the BING Map "Search" and "get directions" is gone/does not work anymore. When I remove "mediencenter" and plug in the headphones the phone is neither accepting nor able of making calls. However reflashing solves the problem - but you can't get rid of those TMO apps without losing functionality.
cmxqu said:
ROM is working very good, more fluent than stock version 1.25 - no problems found yet.
Still noticed the same problems with the stock ROM after uninstalling TMO shipped apps. When I uninstall Navigon the BING Map "Search" and "get directions" is gone/does not work anymore. When I remove "mediencenter" and plug in the headphones the phone is neither accepting nor able of making calls. However reflashing solves the problem - but you can't get rid of those TMO apps without losing functionality.
Click to expand...
Click to collapse
Strange, i deleted all the default T-mobile stuff and everything works just fine..
I also have the german T-mobile Mozart 16GB because it isn't released in the netherlands yet. I uninstalled all the programs Tmo ships. directions work just fine, very strange
hi
hi bro.. i have a question, first.
1- How to flash this ROM in my HTC 7 MOZART?
2- What news have this ROM? it is possible that my phone is blocked trying to flash this rom?
3- What fix this ROM in my cellphone?
thanks bro...
fabrifox said:
hi bro.. i have a question, first.
1- How to flash this ROM in my HTC 7 MOZART?
2- What news have this ROM? it is possible that my phone is blocked trying to flash this rom?
3- What fix this ROM in my cellphone?
thanks bro...
Click to expand...
Click to collapse
According to some other sites (just google the version number), this rom ships out with new devices. So no, it should not get you blocked, as it's a legit update.
Flashing is fairly easy: Backup everything you can, start you Mozart in Bootloader mode (pressing volume down while powering it on), plug it into your PC via USB, install the drivers if needed (done by installing Active Sync in XP, Windows Vista and newer should automatically find the needed drivers), start the updater and follow the instructions.
There is no official changelog, but several people think that the animations are smoother, the touchscreen reacts faster, ...
Seeing that there is no official changelog and the only thing we can do is assume what could have changed, I think there's no sense in discussing this. Especially since you can find several threads in other forums that discuss the changes in various lengths...
I haven't noticed any new problems after the update, so I guess it's at least as good as the previous version.
But this are just my thoughts
hi
FrozenLord said:
According to some other sites (just google the version number), this rom ships out with new devices. So no, it should not get you blocked, as it's a legit update.
Flashing is fairly easy: Backup everything you can, start you Mozart in Bootloader mode (pressing volume down while powering it on), plug it into your PC via USB, install the drivers if needed (done by installing Active Sync in XP, Windows Vista and newer should automatically find the needed drivers), start the updater and follow the instructions.
There is no official changelog, but several people think that the animations are smoother, the touchscreen reacts faster, ...
Seeing that there is no official changelog and the only thing we can do is assume what could have changed, I think there's no sense in discussing this. Especially since you can find several threads in other forums that discuss the changes in various lengths...
I haven't noticed any new problems after the update, so I guess it's at least as good as the previous version.
But this are just my thoughts
Click to expand...
Click to collapse
Thank you so much!!! Ure a bad man =) i try to flash and later i said ok....
if i have a german t-mobile device, do I have to flash my mozart at first? Or can _I just install the new firmware without doing anything before??
edit: and is this version newer or this one: [ROM]RUU_Mozart_HTC_Europe_1.28.401.04_5.52.09.16_22.33 a.50_RELEASE
am I able to install both on my german tmobile mozart?
WinUser009 said:
if i have a german t-mobile device, do I have to flash my mozart at first? Or can _I just install the new firmware without doing anything before??
edit: and is this version newer or this one: [ROM]RUU_Mozart_HTC_Europe_1.28.401.04_5.52.09.16_22.33 a.50_RELEASE
am I able to install both on my german tmobile mozart?
Click to expand...
Click to collapse
No you can't flash the HTC_Europe version, only the TMO_DE version.
TMO_DE stands for T-mobile Germany
HTC_Europe is the generic software for the non branded devices.
Doesn't make any difference except the useless apps you get from t-mobile.
But after you delete them everything is the same.
And for the record, You don't have to flash your phone at first... Installing new firmware IS flashing. so you just run the RUU and make sure zune is running and phone is running, not in stand-by.
And be sure to backup everything you want to keep, haven't flashed my mozart, but i think you lose all data when you flash it.
Sure someone else knows that.
Aerox912 said:
No you can't flash the HTC_Europe version, only the TMO_DE version.
TMO_DE stands for T-mobile Germany
HTC_Europe is the generic software for the non branded devices.
Doesn't make any difference except the useless apps you get from t-mobile.
But after you delete them everything is the same.
And for the record, You don't have to flash your phone at first... Installing new firmware IS flashing. so you just run the RUU and make sure zune is running and phone is running, not in stand-by.
And be sure to backup everything you want to keep, haven't flashed my mozart, but i think you lose all data when you flash it.
Sure someone else knows that.
Click to expand...
Click to collapse
Thanks for the answer!
I thought that I have to set the mozart in the bootloader mode, in order to flash. When I was telling it "flashing" I meant something like hspl like we had to do on the HD2, befor we could flash custom roms or htc roms on it.
edit: and is there any possibility to go back to: 1.25.2250.5 firmware (now installed on my phone)?
and last question this 1.28 version will not breake my warranty, right? It'S a normal t-mobile rom, isn't it?
Guys, I'm not sure I fully understand everything so far.
I basically have a Telstra (Australian) HTC 7 Mozart. From what I gather, I cannot flash this on my device until it is unbranded, is that correct?
hello to everyone.
I have a htc t-mobile mozart Germany but I live in Venezuela and I can assure you and proven DepNet.com for both 1.25 and 1.28
posted on this page to a friend Football and run to perfection
and also I can tell you that my phone came with 1.25 and the 1.28 istale him but then return to 1.25 and all is well.
and the echo for several times trying to place the Spanish language and if anyone can help I'd appreciate it forever
@ WinUser009:
HSPL was needed because we used to flash cooked (and therefore custom-made) ROMs, which were not signed by HTC or any other company able to sign them. These ROMs are unmodified and signed, which is why you can flash them without flashing any unlocked HSPL first.
Bootloader-mode is just a different mode to boot in - it does not need any changes to your phone!
I don't think that there is a possibility to go back to 1.25.xxx - but honestly why would you want to? But I have to admit that I have not yet tried it...
As to the warranty: that's a complicated matter...
This firmware is not official and my new Mozart (I got a new one after sending it in) still had the 1.25 firmware installed (someone posted that newer phones should ship with the 1.28). So there might be a person detecting that you flashed it yourself, if they keep sending out new phones with 1.25 preinstalled.
However, the phone I turned in had 1.28 flashed and I have not received any complaints when I sent it in for a replacement. So I guess it is up to your shop but it should not pose any problems!
@ameel
You can flash as soon as one of these things happen:
- custom roms are released that don't check for the carrier information
- you unlock your phone (somehow)
- Telstra releases an update
But as of now you can't flash these T-Mobile roms on your Mozart.
@minino405
Sorry, but I didn't understand your post. What did you try to tell / ask us?
I hope I could help you with some of your questions
hi everyone, after reading through some of the post , i was confuse on which method to use, currenly i'm with Bell canada running 7.10.8107 , i read that telstra enable me to use wifi tether. here the step if i'm not mistaken
1. download latest LG C900K Firmwares
LG-C900kAT-00-V10d-TEL-AU-AUG-15-2011+0_DZ.zip
2. use nasirahmed method with correct DLL (LGC900KB_100927_MP.zip) to install
3. after use zune to update to latest firmware or download
WIFI Tethering Drivers - 1.0.5.10 (December 2011)
Code:
http://download.windowsupdate.com/msdownload/update/software/dflt/2011/12/437223_lg-c900k_telstra_australia_1.0.5.10.pks_1e2a877b551d2497396bf1d07bf19c833d78381a.cab
and use this method to update
http://forum.xda-developers.com/showthread.php?t=1306415
please confirm if this the right way to do, is there any risk involve in this, will this relock firmware
thanks
Steps are correct. You might find some hurdles hear and there but just be patient and read ALL instuctions.
I did it and it's working but I'm now in the process of reverting my phone back to C900B because I'm not able to unlock C900K. Also, Zune will not update to latest firmware so you will have to do that manually.
If you don't have full backup you will lose everything from your phone.
Good luck.
Klikerko said:
Steps are correct. You might find some hurdles hear and there but just be patient and read ALL instuctions.
I did it and it's working but I'm now in the process of reverting my phone back to C900B because I'm not able to unlock C900K. Also, Zune will not update to latest firmware so you will have to do that manually.
If you don't have full backup you will lose everything from your phone.
Good luck.
Click to expand...
Click to collapse
thanks for reply Klikerko, so there still minor issue , and this firware will not let you use developer unlock, if that the case then i'll wait for bell to update, i rather have it unlock than tether
dev unlock works fine on telstra rom
bobzero said:
dev unlock works fine on telstra rom
Click to expand...
Click to collapse
so is ther any other issue that you using telstra rom, thanks
phihung07 said:
so is ther any other issue that you using telstra rom, thanks
Click to expand...
Click to collapse
voice mail number is not set up, you must add it yourself. Other than that, I can't think of any problem.
phihung07 said:
thanks for reply Klikerko, so there still minor issue , and this firware will not let you use developer unlock, if that the case then i'll wait for bell to update, i rather have it unlock than tether
Click to expand...
Click to collapse
Here's hoping that LG Canada will recognize that it can be updated to have tethering at all. So far they've told me it's physically impossible. Twice. Even after I've tried to tell them that it works fine with the Telstra firmware.
Good luck with the switch over if you chose to go that route.
Okay, so hear me out guys. I have a I9505 (duh) running the foxhoundrom, but when I tried to update from 2.0 - 3.0 I got a bootloop, but the problem is. When I got out of the bootloop, I didn't have any mobile connections.. (screenshot one) Me being such a dork as I am, thought I could fix it on my own, in the settings for changing Network Operators. It takes ages to load them upm and if I connect to one of them, I get and can use the connectivity for a while. Until I lock my phone and unlock it again actually. I heard something about IMEI? No idea what that is, but my IMEI code found via *#06#
But I have a original sim card, it's right and stuff, I have no idea what happend...
I really need help fixing this..
Android 4.3
Foxhound
Philz Recovery
Norwegian Operator: 4g.tele.se (tele2)
warrip said:
Okay, so hear me out guys. I have a I9505 (duh) running the foxhoundrom, but when I tried to update from 2.0 - 3.0 I got a bootloop, but the problem is. When I got out of the bootloop, I didn't have any mobile connections.. (screenshot one) Me being such a dork as I am, thought I could fix it on my own, in the settings for changing Network Operators. It takes ages to load them upm and if I connect to one of them, I get and can use the connectivity for a while. Until I lock my phone and unlock it again actually. I heard something about IMEI? No idea what that is, but my IMEI code found via *#06# is 35************* / 0* (hope that's nto supposed to be private)
But I have a original sim card, it's right and stuff, I have no idea what happend...
I really need help fixing this..
Android 4.3
Foxhound
Philz Recovery
Norwegian Operator: 4g.tele.se (tele2)
Click to expand...
Click to collapse
Firstly, Remove your IMEI number from your post. It's confidential information and someone can use it illegally if they wanted to.
Secondly, To fix your issue of connection the new 4.3 based ROMs need the new MJ5 Modem to work properly.
Flash the MJ5 modem and your problems will be gone
Obagleyfreer said:
Firstly, Remove your IMEI number from your post. It's confidential information and someone can use it illegally if they wanted to.
Secondly, To fix your issue of connection the new 4.3 based ROMs need the new MJ5 Modem to work properly.
Flash the MJ5 modem and your problems will be gone
Click to expand...
Click to collapse
Thanks so much, where can I find the MJ5 modem?
It's because of people like you my phone is still alive!
Found it, thanks a lot again!
Display is not working but sound, touch , volume keys are working after flashing stock ROM.
Please help me.
munsuyog said:
Display is not working but sound, touch , volume keys are working after flashing stock ROM.
Please help me.
Click to expand...
Click to collapse
Contact service center
Please be clear with your problem If you need help
munsuyog said:
Display is not working but sound, touch , volume keys are working after flashing stock ROM.
Please help me.
Click to expand...
Click to collapse
Mine worked perfectly after I have flashed stock rom but now again I have flashed MiUI 8 for it.
May be you have been using over charging.
munsuyog said:
Display is not working but sound, touch , volume keys are working after flashing stock ROM.
Please help me.
Click to expand...
Click to collapse
Please tell me the link you downloaded the stock ROM then maybe I can help.
Sharath Guddad said:
Please tell me the link you downloaded the stock ROM then maybe I can help.
Click to expand...
Click to collapse
I have flashed a stock ROM on my mobile phone with S/N: HB0M78ZW(10). its a dual sim. Previosuly I have rooted the phone and put back to original state (unroot). I am not sure if I flashed the correct version/baseband (if there is) as right now even though I turned the mobile data in the settings I cannot see any display on my screen that I am connected to it. Worse is, my network signal is on the maximum level and I cannot receive and make outgoing calls as well.
Can someone help me to solve this problem? or can some of youu tell me what is the problem? As I already tried to reflash with other version of ROM and just last night my phone got updated to S036_160822.
I don't need an updated rom I just wanted my phone to work correctly as I bought it for the first time. and I don't know which stock rom should I download as I am seeing a lot of it in the internet.
Question:
1.Did I flashed a wrong baseband?
2. If I will file a complain to lenovo and have it warrantied will they be see that I flashed or roorted my phone previously on my own?
I hope someone will help me on this as I am desperate to solve this problem.
ralphsales said:
I have flashed a stock ROM on my mobile phone with S/N: HB0M78ZW(10). its a dual sim. Previosuly I have rooted the phone and put back to original state (unroot). I am not sure if I flashed the correct version/baseband (if there is) as right now even though I turned the mobile data in the settings I cannot see any display on my screen that I am connected to it. Worse is, my network signal is on the maximum level and I cannot receive and make outgoing calls as well.
Can someone help me to solve this problem? or can some of youu tell me what is the problem? As I already tried to reflash with other version of ROM and just last night my phone got updated to S036_160822.
I don't need an updated rom I just wanted my phone to work correctly as I bought it for the first time. and I don't know which stock rom should I download as I am seeing a lot of it in the internet.
Question:
1.Did I flashed a wrong baseband?
2. If I will file a complain to lenovo and have it warrantied will they be see that I flashed or roorted my phone previously on my own?
I hope someone will help me on this as I am desperate to solve this problem.
Click to expand...
Click to collapse
You said display isn't working. Please be clear.
what do you mean by "display not working?" , you said touch is working how did you confirm ? be specific.
ralphsales said:
I have flashed a stock ROM on my mobile phone with S/N: HB0M78ZW(10). its a dual sim. Previosuly I have rooted the phone and put back to original state (unroot). I am not sure if I flashed the correct version/baseband (if there is) as right now even though I turned the mobile data in the settings I cannot see any display on my screen that I am connected to it. Worse is, my network signal is on the maximum level and I cannot receive and make outgoing calls as well.
Can someone help me to solve this problem? or can some of youu tell me what is the problem? As I already tried to reflash with other version of ROM and just last night my phone got updated to S036_160822.
I don't need an updated rom I just wanted my phone to work correctly as I bought it for the first time. and I don't know which stock rom should I download as I am seeing a lot of it in the internet.
Question:
1.Did I flashed a wrong baseband?
2. If I will file a complain to lenovo and have it warrantied will they be see that I flashed or roorted my phone previously on my own?
I hope someone will help me on this as I am desperate to solve this problem.
Click to expand...
Click to collapse
if your bootloader is unlocked then warranty gets void
Hi,
I have demo unit with demo softvare that realy anoying me and lot of settings are disabled. If someone know haw can it change with original lg stock rom. Can it done with lg up or it can be done only via box?
I know how to use lg up and fladh but someone told me not to do it because I will only get dead phone after that.
Waiting someone to replay
mikkica said:
Hi,
I have demo unit with demo softvare that realy anoying me and lot of settings are disabled. If someone know haw can it change with original lg stock rom. Can it done with lg up or it can be done only via box?
I know how to use lg up and fladh but someone told me not to do it because I will only get dead phone after that.
Waiting someone to replay
Click to expand...
Click to collapse
even if you flash the damn G6 KDZ on it, maybe you never get network to work, that phone is just a music player, a internet browser, vamera, etc etc, mobile network maybe never get working if you flash this.
sun_is_shinning said:
even if you flash the damn G6 KDZ on it, maybe you never get network to work, that phone is just a music player, a internet browser, vamera, etc etc, mobile network maybe never get working if you flash this.
Click to expand...
Click to collapse
of course i know that demo is without sim support but retail software is anoying even to use like tablet, because lot of restrictions in settings.thats the reason i want stock rom
mikkica said:
of course i know that demo is without sim support but retail software is anoying even to use like tablet, because lot of restrictions in settings.thats the reason i want stock rom
Click to expand...
Click to collapse
you can try but, i am not 100 sure it will work, maybe you brick the phone and then you have a brick, so...
even more you didnt know what variant is more close to your device and things get worse then.
sun_is_shinning said:
you can try but, i am not 100 sure it will work, maybe you brick the phone and then you have a brick, so...
even more you didnt know what variant is more close to your device and things get worse then.
Click to expand...
Click to collapse
did the flash and everything is ok
You can flash your LG G6 H870V demo with https://dc5.androidfilehost.com/dl/...58994092/H87020a_OREO_00_OPEN_EU_OP_0423.kdz?
Lgup option upgrade
You have to do a factory reset .
https://www.youtube.com/watch?v=gM8sQiyHM_4
No network because modem chip is missing on the motherboard.
can i flash custom firmware on demo unit?
hugoboss224 said:
can i flash custom firmware on demo unit?
Click to expand...
Click to collapse
hi,
and possible to flash this for Lg Q6 M700V ?
thats all
thanks all