Database Users

Mk808 android 4.1 mini pc

http://www.geekbuying.com/item/MK80...ip-RK3066-Cortex-A9-Mini-PC-stick-307415.html
What everyone think? Anybody took the leap and bought it yet? I was thinking about getting one so I don't have to hookup my laptop to my TV anymore
Sent from my SGH-T999 using xda premium

nice gadget!!
richeazy said:
http://www.geekbuying.com/item/MK80...ip-RK3066-Cortex-A9-Mini-PC-stick-307415.html
What everyone think? Anybody took the leap and bought it yet? I was thinking about getting one so I don't have to hookup my laptop to my TV anymore
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I got mine mk808 yesterday. I bought a mk802 in august but it "burned" after 1 week. I also think that the mk802 was very laggish... The mk808 is far much better!!!
So far I am very very very happy with it!
regards

gillidk said:
I got mine mk808 yesterday. I bought a mk802 in august but it "burned" after 1 week. I also think that the mk802 was very laggish... The mk808 is far much better!!!
So far I am very very very happy with it!
regards
Click to expand...
Click to collapse
gillidk, Did you buy yours from geekbuying? How long was the delivery and which country are you
I was about to order the similar GV-20 mk808 based device from gadgetgreats but poeple have mentioned fraud etc
http://www.gadgetgreats.com/gv-20-a...i-a9-dual-core-android-4-0-mini-pc-gv-20.html
many thanks

I got mine today. I ordered it over a week ago. Weird because I didn't get my shipping information until last night, and when I tracked it, it was already out for delivery.
My Measy Air Mouse R11 is screwed though I think. It keeps sliding to the left hand side. I even tried on my PC and it does the same thing. I've tried to resync it and screw with it, but it keeps moving. Very hard to use a mouse that doesn't stay still. The MK808 is fun. I just got it tonight. I haven't had the time to get really crazy with it. Seems to run ok and would be far more enjoyable with a good input device.

Ordered mine today (only $60), if it really works as reviews say, it's quite a bargain

Do you still have problems with the rc11 or are they solved ?
send by an 42y old gio junkie™

player911 said:
I got mine today. I ordered it over a week ago. Weird because I didn't get my shipping information until last night, and when I tracked it, it was already out for delivery.
My Measy Air Mouse R11 is screwed though I think. It keeps sliding to the left hand side. I even tried on my PC and it does the same thing. I've tried to resync it and screw with it, but it keeps moving. Very hard to use a mouse that doesn't stay still. The MK808 is fun. I just got it tonight. I haven't had the time to get really crazy with it. Seems to run ok and would be far more enjoyable with a good input device.
Click to expand...
Click to collapse
Did you get it by express delivery or normal delivery
send by an 42y old gio junkie™

I fixed my Measy Air Mouse R11.
To reset the Gyros, you lay it flat and press and hold LEFT ARROW + G for a few seconds... making sure it is flat. Now it works great.
I'm having some weird issues with some misbehaving apps. Root explorer started freaking out. And now my FPse won't use OpenGL for the life of me. I'm interested in trying the CM10 build for it but the operation requirements are bland. Supposedly it requires CWM recovery, which is supplied but doesn't give specifics how or what order or process to get it done.
I have to say that it is a fun unit to work with and chews through FPse roms. I'm surprised how well it runs for a chinese chipset.
Flashing is a bit of a chore and instructions aren't very clear, so I'll post them here:
With the unit OFF:
Insert a paper clip into the reset hole and press it in and HOLD IT down.
Awkwardly insert the MicroUSB-PC cable into the OTG. This will power the unit and it should boot into Flash mode given you've held the paperclip down properly.

Trying to install eGalax Touch Screen linux driver
I'm trying to install the eGalax Touch Screen driver for Linux 2.6 that came with my liliput 7 inch touch screen. The touch screen is for use in my car. Using the mk802 II or ug808 to replace my audio system. I just need to get the driver installed. The driver installation script is looking for the locations "usr/local" and "usr/bin", but the only "usr" directory I can find is in "system/usr"... I'm not sure if I should use that location and create the local and bin directories there or not. But when I created the usr/local and usr/bin at the same level as system (which is in the "mnt" directory which is also at the same level as "root" directory (btw, I cannot find a "home" directory), the install seemed to work fine using Better Terminal Pro android app with the bash shell. However, when I restarted the device, the "usr" directory that I create was gone, so the driver install was wiped apparently, and the usb HDMI touch screen still does not work... I can post the bash script if that helps. This is the last thing I need to get this to work, then I can have a full Android ICS system in my car. Thanks in advance.
FYI The HDMI works great to view and use a usb mouse or the RII keyboard. they work great. It's just the touch screen input does not work. It used to when I first turned on the device with the touch screen on, but the x-y coordinates were reversed, hence attempting to install the driver. I have ICS compiled from source and may attempt to add the drivers into it and create an img to them load on the mk802 II, but I fear that I'll loose any proprietary hardware drivers that came with the mk802 II.
I also wanted to make a img backup using ROM Manager, but ClockworkMod is not available for the MK802 II. ANy leads on this would help. Been researching and testing this for a month now.

rscreen said:
gillidk, Did you buy yours from geekbuying? How long was the delivery and which country are you
I was about to order the similar GV-20 mk808 based device from gadgetgreats but poeple have mentioned fraud etc
http://www.gadgetgreats.com/gv-20-a...i-a9-dual-core-android-4-0-mini-pc-gv-20.html
many thanks
Click to expand...
Click to collapse
Ordered on the 26th for 65$ (actually cost £42 through paypal),
they shipped on the 29th (tracking never worked).
And it arrived on the 6th. So quicker than expected.
I've applied the firmware update which was a slightly newer build of 4.1. Mentioned in both these places (applied the tweaked one from deadhp1 for the play store location fix in case needed)
http://blog.geekbuying.com/index.php/2012/11/03/mk808-mini-pc-firmware-update-on-3th-nov/
http://www.armtvtech.com/armtvtechforum/viewtopic.php?f=13&t=53
It now seems to play any avi / mkv / mp4 i've given it (usually on a usb stick or micro SD). It happily plays avi's over the network (using ES file explorer).
Its definitely better than the out of sync UG802 which wasn't quite right and the power lead came out too easily.
I use the custom stock video app (seems to come with most of the RockChip devices) and MX player (it looks a lot nicer)

I was looking for a device like this one and the reviews are really helpful

Anyone know of GPS that works with these?
jcps said:
I was looking for a device like this one and the reviews are really helpful
Click to expand...
Click to collapse
Anyone know of GPS (USB or embedded) that works with these? Thanks for your help.

So confused... it's a USB drive that turns a TV into an Android PC? Does the TV require any special functionality to allow for that?

Avuja said:
So confused... it's a USB drive that turns a TV into an Android PC? Does the TV require any special functionality to allow for that?
Click to expand...
Click to collapse
It is a mini PC that has HDMI output. Your TV must have a vacant HDMI input so you can plug the mini PC into it. My TV supports 1080p. And so I can set the output resolution on the mini PC to 1080p. But it also could be set to 720p as well. These don't come with any display so you have to plug it in to your TV or a monitor that supports HDMI. The audio is pushed through the HDMI as well. To control it you can use a USB mouse and/or USB keyboard. Your cheap wireless mouse will work but the USB ports do not have power to them so I've had to use a powered USB hub to make my wireless keyboard work further than a foot away from the USB dongle for the keyboard. The hub also allows you to plug in other devices like a USB camera. But the ones that work are somewhat limited , be aware. Does that help you understand it?

Maxx57 said:
I'm trying to install the eGalax Touch Screen driver for Linux 2.6 that came with my liliput 7 inch touch screen. The touch screen is for use in my car. Using the mk802 II or ug808 to replace my audio system. I just need to get the driver installed. The driver installation script is looking for the locations "usr/local" and "usr/bin", but the only "usr" directory I can find is in "system/usr"... I'm not sure if I should use that location and create the local and bin directories there or not. But when I created the usr/local and usr/bin at the same level as system (which is in the "mnt" directory which is also at the same level as "root" directory (btw, I cannot find a "home" directory), the install seemed to work fine using Better Terminal Pro android app with the bash shell. However, when I restarted the device, the "usr" directory that I create was gone, so the driver install was wiped apparently, and the usb HDMI touch screen still does not work... I can post the bash script if that helps. This is the last thing I need to get this to work, then I can have a full Android ICS system in my car. Thanks in advance.
FYI The HDMI works great to view and use a usb mouse or the RII keyboard. they work great. It's just the touch screen input does not work. It used to when I first turned on the device with the touch screen on, but the x-y coordinates were reversed, hence attempting to install the driver. I have ICS compiled from source and may attempt to add the drivers into it and create an img to them load on the mk802 II, but I fear that I'll loose any proprietary hardware drivers that came with the mk802 II.
I also wanted to make a img backup using ROM Manager, but ClockworkMod is not available for the MK802 II. ANy leads on this would help. Been researching and testing this for a month now.
Click to expand...
Click to collapse
probably you will need the kernel sources. also, you need root access. that error (directories that get lost after reboot) might be due to yo need to remount the /system partition in rw mode (by default is ro) and perhaps you will neet to do some symlinks on /bin to /system/xbin.
other thing you..must get in considwration is that android is different from linux.. and that you might need to compile the kernel module, such thiing im not sure that is posible from within the device itself...
or.. i just might be way off track, in which case jyst dismiss my answer
Enviado desde mi MB860 usando Tapatalk 2

Maxx57 said:
Anyone know of GPS (USB or embedded) that works with these? Thanks for your help.
Click to expand...
Click to collapse
I'm very interested to know as well, I have an MK808 and would love to add a GPS dongle.

Anyone know if a headset can be paired over bt for voip calls and or voice commands and search /google now?
Sent from my GT-N8013 using XDA Premium HD app

killerskincanoe said:
Anyone know if a headset can be paired over bt for voip calls and or voice commands and search /google now?
Sent from my GT-N8013 using XDA Premium HD app
Click to expand...
Click to collapse
just so you know it doesn't have built in bluetooth.

if you need bluetooth google for imito mx1. this one seems to be the best mk808 model so far. i got mine last month but haven't tried bluetooth yet. antutu gives a score around 6500. it's a nice toy to play with on bigscreen tvs.

I read up on this one. Good vid review at http://youtu.be/X8pozwuAq7w
Anyone know the spec diff between this and the MX2?
and is geekbuying the best seller for this device or ???
c
h-guy said:
if you need bluetooth google for imito mx1. this one seems to be the best mk808 model so far. i got mine last month but haven't tried bluetooth yet. antutu gives a score around 6500. it's a nice toy to play with on bigscreen tvs.
Click to expand...
Click to collapse
---------- Post added at 11:31 AM ---------- Previous post was at 11:24 AM ----------
can anyone comment on this non-support of XBMC for Rockchip? and if not Rockchip, which stick-PC gets it right?
one comment also that I would like more info on is that both iMITO units underperform compared to MK808
"Lack of XBMC support for HD hardware acceleration is a major issue that Rockchip needs to address if they want to keep selling SoC chips to the Stick PC mfgrs. Stick PC makers need 2 take action on this as well and if Rockchip won't play ball, they need to consider alternative SoC. We need more processing power anyway to get close to current smart-phone level and play the latest 3D games."

Easy connected problem with android 6.0.1 "m"

I got a Samsung Galaxy S7 EDGE and Easy Connected can not start screen. I know that this is the fault of the new Android "M" 6.0.1. Does anyone know the method to fix this?

The problem might be also caused by the S7 Edge QHD 1440 x 2560 screen resolution, in this case there might be no solution.
I often had problems with QHD screens and Miracast...

themissionimpossible said:
The problem might be also caused by the S7 Edge QHD 1440 x 2560 screen resolution, in this case there might be no solution.
I often had problems with QHD screens and Miracast...
Click to expand...
Click to collapse
I have been having the same problem. Black screen with a LG G4. Also with QHD Screen and also Android 6.0
I did not Test yet the Nexus 6P or the Nexus 5, but both are using Android 6.0.1 from April. So I do not think they will have better luck.
Nexus 5 Only have 1080p resolution, I'll see if things are better with this one and Let you know.
I cannot make the january version 3.4.X of easyconneted to work because of a failled certificate message.
Maybe if this one works, our problems can be fixed.
Regards,
Santroph

dropbox.com/s/63nlyxn0er4cjvb/EasyConnected.151230.apk?dl=0 follow this link and install to the headunit and it will fix the issue on android 6.0

searching for answer, thank u will try it cause my unit would just turn black after my phone goes into drive mode
Sent from my S7-Edge using Xparent Skyblue Tapatalk 2

themissionimpossible said:
The problem might be also caused by the S7 Edge QHD 1440 x 2560 screen resolution, in this case there might be no solution.
I often had problems with QHD screens and Miracast...
Click to expand...
Click to collapse
Its the app on HU needs updating to communicate properly with the new android on cellphone nothing to do with resolution
Sent from my SM-G925T using XDA-Developers mobile app

Can't get it to connect to my phone
Sent from my Galaxy S7using Xparent Skyblue Tapatalk 2

petes21st said:
dropbox.com/s/63nlyxn0er4cjvb/EasyConnected.151230.apk?dl=0 follow this link and install to the headunit and it will fix the issue on android 6.0
Click to expand...
Click to collapse
I can't install it -- b/c Easy Connected is installed as a system app and I get Signature Error

Hi, almost same problem here, samsung s7 edge. When I plug the phone into the player, it recognizes a phone, but doesn't get past step 2 (install something). I enabled developer options-us debugging as the app asks, but doesn't get over it. I downloaded this apk from the Dropbox link you posted, but the unit doesn't install the new version. Any help?
My unit is android 5.1.1, RK3188 processor, 1024×600 resolution.

petes21st said:
dropbox.com/s/63nlyxn0er4cjvb/EasyConnected.151230.apk?dl=0 follow this link and install to the headunit and it will fix the issue on android 6.0
Click to expand...
Click to collapse
This worked great for me thanks for posting this!! :good:
Downloaded the apk to usb stick. Plugged usb into head unit. Used head unit file manager to open the apk and updated the app from there.
The newer Easy Connected interface is a lot faster and smoother with Marshmallow! I love my chinese pumpkin head unit again!

Anyway to get the main app out of Chinese?

RedLdr said:
Anyway to get the main app out of Chinese?
Click to expand...
Click to collapse
You mean the pumpkin head unit itself?
If so, yes go to settings, language, and change it. You'll might have to use google translate on your phone to navigate if it's in chinese, but the combination of buttons to get to the language screen is the same on most androids.

Should I downgrade Easy Connected App?
Birdmantamu said:
This worked great for me thanks for posting this!! :good:
Downloaded the apk to usb stick. Plugged usb into head unit. Used head unit file manager to open the apk and updated the app from there.
The newer Easy Connected interface is a lot faster and smoother with Marshmallow! I love my chinese pumpkin head unit again!
Click to expand...
Click to collapse
I have just bought an Erisin es4698V head unit, with android 5.1.
With my OnePlus One with Android 6.0.1, Easy Connected app does not work (it doesn't install when connected).
Easy Connected app version is HT03.4.2.2, AFAIK latest available.
Should I install an older version of the app?
My head unit's brand is erisin not pumpkin. Is this apk valid?

EasyConnected version FY7.4.3.1 doesnot connect to Android 7
I have a Joying UL JY-UL135N2 with Lollipop 5.1.1 with EasyConnceted VFY7.4.3.1 and does not connect with my Lg G5 Android 7. I would liek to find if anybody else have the same problem. Is there a solution or another way to get the phone connected to my Head Unit.

Birdmantamu said:
This worked great for me thanks for posting this!! :good:
Downloaded the apk to usb stick. Plugged usb into head unit. Used head unit file manager to open the apk and updated the app from there.
The newer Easy Connected interface is a lot faster and smoother with Marshmallow! I love my chinese pumpkin head unit again!
Click to expand...
Click to collapse
Is 1.5.1.2.30 newer than HT03.4.2.2?

s7 edge nougat not pass step 2 (install service , but it installed easyconnect service and drivemode on phone!).
s7 edge mm works only usb mode
some idea?

Same problem with my Nexus 6P phone on Android 7, cant pass step 2 but drivemode is showing on phone
Thanks

DanB0y said:
Same problem with my Nexus 6P phone on Android 7, cant pass step 2 but drivemode is showing on phone
Thanks
Click to expand...
Click to collapse
sama problem here can you send the updated apk???
thanks very much

What updated apk ? I just said I have the same problem, its not working...

Yea i know im not asking you i mean tgat i have the same problem you have and am asking people here about another apk of that app that support android 7
Thanx very much

I4 smartwatch

Hi all I just got my 16gb IQI I4 its a sweet watch using the same launcher as the kw88 so all the themes work... I ordered mine from aliexpress and got luck that I didn't have to pay any customs on it. but after 2 days of usage I have to say its totally,,, as with most of the watches in this class the only drawback in the battery... but im getting about 8 hours of average usage double on light usage so its ok for me...

torchwolfery said:
Hi all I just got my 16gb IQI I4 its a sweet watch using the same launcher as the kw88 so all the themes work... I ordered mine from aliexpress and got luck that I didn't have to pay any customs on it. but after 2 days of usage I have to say its totally,,, as with most of the watches in this class the only drawback in the battery... but im getting about 8 hours of average usage double on light usage so its ok for me...
Click to expand...
Click to collapse
Hi I'm interested in using it as a GPS Golf watch. Can you check if any of the golf apps install OK, like Hole 19?

ok so i downloaded the app, it installed and ran ok. i couldn't really test the full functions as there are no courses nearby ... i can tell you that when using wifi i get a flawless gps fix in seconds... i havent tried it with mobile cause my phone has lte network so i just use the wifi and connect this way...
my only negative is that there is one dead pixel but i just put a green watch face so i cant see it lol...

Help
Hi how to add watchfaces besides the original one?
thanks mate

update
so it seems the I4 got an update from v4 to v5... seem to be some changes to the tethering app and it gives you an option at the start to download it as you set up the watch... For some reason I couldn't get the wireless update to work so I downloaded the files from the china gadgets website and used SP Flash tool...
including a link here
HTML:
http://chinagadgetsreviews.com/download-android-5-1-stock-firmware-iqi-i4-smartwatch-2.html

torchwolfery said:
ok so i downloaded the app, it installed and ran ok. i couldn't really test the full functions as there are no courses nearby ... i can tell you that when using wifi i get a flawless gps fix in seconds... i havent tried it with mobile cause my phone has lte network so i just use the wifi and connect this way...
my only negative is that there is one dead pixel but i just put a green watch face so i cant see it lol...
Click to expand...
Click to collapse
Many thanks mate, do you have a good support site link for ROMs rooting etc please?
---------- Post added at 07:40 PM ---------- Previous post was at 07:33 PM ----------
coffer said:
Hi I'm interested in using it as a GPS Golf watch. Can you check if any of the golf apps install OK, like Hole 19?
Click to expand...
Click to collapse
torchwolfery said:
ok so i downloaded the app, it installed and ran ok. i couldn't really test the full functions as there are no courses nearby ... i can tell you that when using wifi i get a flawless gps fix in seconds... i havent tried it with mobile cause my phone has lte network so i just use the wifi and connect this way...
my only negative is that there is one dead pixel but i just put a green watch face so i cant see it lol...
Click to expand...
Click to collapse
It should run the app in standalone mode as it is on the watch as long as a course is downloaded and only needs to access the GPS module on the watch. Thanks for the info anyway.

torchwolfery said:
so it seems the I4 got an update from v4 to v5... seem to be some changes to the tethering app and it gives you an option at the start to download it as you set up the watch... For some reason I couldn't get the wireless update to work so I downloaded the files from the china gadgets website and used SP Flash tool...
including a link here
HTML:
http://chinagadgetsreviews.com/download-android-5-1-stock-firmware-iqi-i4-smartwatch-2.html
Click to expand...
Click to collapse
what scatter-loading file did you used in the Smart phone flash tool?
Thnx

coffer said:
Many thanks mate, do you have a good support site link for ROMs rooting etc please?
---------- Post added at 07:40 PM ---------- Previous post was at 07:33 PM ----------
sadly no i do not...
It should run the app in standalone mode as it is on the watch as long as a course is downloaded and only needs to access the GPS module on the watch. Thanks for the info anyway.
Click to expand...
Click to collapse
marwin1981 said:
what scatter-loading file did you used in the Smart phone flash tool?
Thnx
Click to expand...
Click to collapse
MT6580_Android_scatter when you unpack the firmwear its in the main folder

Newbe here. But I received my new I4 yesterday. Usi. G wiiwatch 1.0 to connect, I can't. My samsung S4 won't run the apk file. Says it's not the right format and my galaxy tablet crashes everytime it connects to the I4.
My Q is is there anothe .apk app that emulates the wiiwatch app ?
Q2, is there a way you brainiacs(I use this term in the highest regard ) have figured out (besides rooting) .
I did connect my PC to the I4 via BT but to transfer 80 files it was going to take 400 hours. WTF man!
One more Q. Has anyone gotten inside the I4 to see if u can swap out the sd (tf) card ?
Thata my next step. I did that on the ZGPAX 3G Smartwatch Phone .
Any way please HELP!. I got this to load up with mp3's Id reather put a 32gb card in.

Make it square
I also have the wonderful I4 even thought this thing is buggy. Just bought it and problem after problem
Another question please. The round display of this watch cuts off the corners of what would be a square screen. Is there an app that compresses the screen to a square one . please get back.

torchwolfery said:
Hi all I just got my 16gb IQI I4 its a sweet watch using the same launcher as the kw88 so all the themes work... I ordered mine from aliexpress and got luck that I didn't have to pay any customs on it. but after 2 days of usage I have to say its totally,,, as with most of the watches in this class the only drawback in the battery... but im getting about 8 hours of average usage double on light usage so its ok for me...
Click to expand...
Click to collapse
How the heck r u connecting with wiiwatch? I can't it keeps disconnecting. Do u know of a work around?
Thnks deputydaves

StoutDave said:
How the heck r u connecting with wiiwatch? I can't it keeps disconnecting. Do u know of a work around?
Thnks deputydaves
Click to expand...
Click to collapse
Is this because the supplied app is "ancient" and built when marshmellow was around . . . . and not "nougat' ? ? ? Did the app get to beta ?
.
It burns me up we got "crap" for apps . . . Hello China, are you awake over there ? Do you care ?

I have to return yet another smartwatche to GB. I can't download to memory. It keeps fibulating, connected not connect ed. This watch has givin me such big hemmaroids its unbelievable. Do u know which Microsoft OS will this work on?

HandmadeSoapman said:
Newbe here. But I received my new I4 yesterday. Usi. G wiiwatch 1.0 to connect, I can't. My samsung S4 won't run the apk file. Says it's not the right format and my galaxy tablet crashes everytime it connects to the I4.
My Q is is there anothe .apk app that emulates the wiiwatch app ?
Q2, is there a way you brainiacs(I use this term in the highest regard ) have figured out (besides rooting) .
I did connect my PC to the I4 via BT but to transfer 80 files it was going to take 400 hours. WTF man!
One more Q. Has anyone gotten inside the I4 to see if u can swap out the sd (tf) card ?
Thata my next step. I did that on the ZGPAX 3G Smartwatch Phone .
Any way please HELP!. I got this to load up with mp3's Id reather put a 32gb card in.
Click to expand...
Click to collapse
i have no idea why it wont install, it worked for me on g3 and redmi note 4 but as others have observed the app doesnt work.. i actually use the watch as a back up phone so that at the weekends i can leave my main phone at home... transfering files i just use the cable that came with the watch as it works fine and transfer rate is very high...
StoutDave said:
I also have the wonderful I4 even thought this thing is buggy. Just bought it and problem after problem
Another question please. The round display of this watch cuts off the corners of what would be a square screen. Is there an app that compresses the screen to a square one . please get back.
Click to expand...
Click to collapse
not sure i understand what you mean you can switch between full and square screen for apps that get cut off
StoutDave said:
How the heck r u connecting with wiiwatch? I can't it keeps disconnecting. Do u know of a work around?
Thnks deputydaves
Click to expand...
Click to collapse
as i said I'm not using it using wifi or 3g to sync with google fit...
sorry i cant be more help for me its just a backup and watch really

Fluff!
---------- Post added at 08:57 PM ---------- Previous post was at 08:47 PM ----------
I4. PROBLEM: I thought the usb magnetic contacts weren't making contact with watch.
This is another problem solved. But… another probable problem shot to hell lol.
As always its usually something completely diff. As in this case.
Solution: it turns out my 2 year old PC (where my songs r stored) had troubles communicating with the I4. I followed instructions from , forum.xda-developers.com - Windows 10 MTK VCOM USB Drivers for 32 & 64 bit + Driver install tutorial M2
As usual they had the answer. But! I still don't know if this was the solution because after following instructions it still didn't work using my normal usb 2.0 ports. I thought, "I wonder how my usb3.0 wouldhandle this" and BOOM! IT WORKED.
So in the long run I got my music to my I4.
So maybe u can pass this on.
Windows 10 MTK VCOM USB Drivers for 32 & 64 bit + Driver install tutorial M2
Windows 10 MTK VCOM USB Drivers for 32 & 64 bit + Driver install tutorial M2
forum.xda-developers.com

Hi Guys!
some answers on your questions. you can make the screen rectangle if you keep pushed the button . above you see a watch and there you can chose this option.
I have some questions for you. Do you have any workaroud to decrase the vibration? it s really terrible!!!!!
How long juice do you have? i reach max 8 hours of battery... really bad! i thought you can reach a day (12 hours)
is any custom rom/firmware for this device? i have the i4 air (no pro)
Thank you!

hi, to the forum,
I did try to flash my i4 (i4p) but the update stopped at 61% while doing the download Flash part.
now the watch won't start up anymore. screen just flashes for an instant but nothing happens. while keeping the button pressed for 30 seconds it seems as if it is resetting by flashing and vibrating again for an instant but same effect.
i tried flashing again but allways get stuck at 61%.
I have don't flashing multiple times before on other android devices. Maybe it's something with the drivers? the device manager does however show the COM4 port identified correctly.
I would be grateful if anybody could help me.
BTW. I did the update bc i had the V1 firmware and the gps was not working at all.
thanks.
edit: i just realized i might have downloaded the 2 gb version but actually have the 1 gb version. Does anybody know a ways to fix it? i will try getting the 1GB Firmware and flash that.

Hello. I hoe somebody in this Forum can help me. I get for some weeks my IQI i4 Air. The Watch works very well until I install an app from teh google play store. The watch hanging up. I tried to reboot but now the watch ist hanging in the boot routine. The watch update the Apps and than the Apps will be started - here the watch ist hanging. I do not find some help how I can do a factory reset. I will remember: I could not go into the Android Settings while the watch can't boot completely. So I'm here now. Can somebody help me?

I4 air sensors
Hi i have my i4 air smartwatch for about a month.suddenly the autolight feature not working properly. And my pedometer didn't work properly by not increasing the steps when walking.it stays zero.
Anybody have the same issues?
I'd already tried to restart and turn on off the watch. I dont wanna to reset all the factory setting coz i already download many themes.anybody help?

[Request] AIDA64 Usb devices screenshot - Xbox One Controller OTG connected

Hi Guys,
Since an Xbox One Controller cannot be connected over bluetooth to this device (check out other thread here), I was wondering if the ZTE Axon 7 does pick up the device when connected over USB-C otg.
I know that button mapping is incorrect or that the controller doesn't seem to work with android games. I only intend to use it with moonlight, which has its own built-in driver.
What I'm looking for is confirmation that the Axon 7 does pick up a USB device when the controller is connected, you can see that if you use the AIDA64 app, under the USB devices section. I'm looking for a screenshot of this app on the Axon 7 with the xbox one controller connected.
You can find an example here.
Thanks in advance!

I'll try it tonight

Znuf said:
I'll try it tonight
Click to expand...
Click to collapse
Thanks in advance !

Znuf said:
I'll try it tonight
Click to expand...
Click to collapse
Ey Znuf, did it work? Apologies for pushing, but I'll have to make a decision on new phone soon, and if aida64 does not pick it up, would be kind of a dealbreaker .
Thanks !

Here your screen sorry. Last night I didn't go to my home

Znuf said:
Here your screen sorry. Last night I didn't go to my home
Click to expand...
Click to collapse
Ey Znuf! Thank you so much, no problem at all .
My last questions and then I'll stop bothering you: which android version/custom rom/device (A2017G/A2017U/A2017) are you using? Specific otg cable that you were using?
Thanks

I'm on G variant with stock room.
The USB cable is a icy box cable ref ib-cb006

Znuf said:
I'm on G variant with stock room.
The USB cable is a icy box cable ref ib-cb006
Click to expand...
Click to collapse
You've been a great help Znuf, thank you so much!
Have a month XDA ad free on me .

Wow thanks a lot. <3

@Znuf @TimoVerbrugghe (when you can finally test).
Are you able to play android games when connected over otg?
Like GTA, PPSSPP etc. Android apps...

Ravi2078 said:
@Znuf @TimoVerbrugghe (when you can finally test).
Are you able to play android games when connected over otg?
Like GTA, PPSSPP etc. Android apps...
Click to expand...
Click to collapse
Will do, will probably arrive in the course of next week.

Ravi2078 said:
@Znuf @TimoVerbrugghe (when you can finally test).
Are you able to play android games when connected over otg?
Like GTA, PPSSPP etc. Android apps...
Click to expand...
Click to collapse
I've not been able to test OTG yet, will do tomorrow. But already tested with Bluetooth, and it's picked up as a regular controller with correct button mapping for several Android Apps (tried Moonlight & Mupen64).

I can now sadly confirm that while running LineageOS 14.1 (based on Android 7.1.2) on the phone, my XBOX One Controller DOES NOT WORK while connected over OTG, even more, I experience the reboot loop issue.
I've not tried it on the stock rom, but will stay on LineageOS for now. The controller does work over Bluetooth (with correct button mapping in my experience).

Redmi note 7 - ps4 controller

Hello I really need some insight with this. I just bought an otg cable for pairning my redmi note 7 with my ps4 controller because I couldnt fix the input delay via blutooth and the continuous connect fix was not working for me(with both new and old version of the program) . When I paired the controller with the cable nothing happened, I then tried with my ps3 controller again nothing happened.They just charge and that's it, no inputs. When i put a mouse on the otg cable the mouse worked normally. When I tried it with my friend's Mi9t everything worked fine ! I tried the USB debugging settings etc, still the same. Is there any way to fix this?

i haven't tried it myself but maybe this could help you :
https://in.c.mi.com/thread-221458-1-1.html

Thanks I will try this when I get off work and will post the results. I hope this works cause I use my device as an emulation station and this is a big problem for me.

Tsibosp said:
...and the continuous connect fix was not working for me(with both new and old version of the program) .
Click to expand...
Click to collapse
What program are you using and what ROM?
Sent from my lavender using XDA Labs

hello, I used the Bluetooth Auto Connect (both the most recent version and an old one which some people said that works better) with no luck. Everything works as it should for a minute or so and then lags kick in and everything is unplayable. I use the most recent MIUI Global 10.3.10. Waiting for thw MIUI 11 update any day now.

EgyBob said:
i haven't tried it myself but maybe this could help you :
https://in.c.mi.com/thread-221458-1-1.html
Click to expand...
Click to collapse
Hey it kinda works that way. I mean you have to set it up time after time, after time but it works. So it is the same uncompatibility with the ps4 controller the owners of K20 and K20 Pro are posting about, I just cant figure out why it works fine via bluetooth(minus the insane lag) and not with the otg cable. It's a pain in the ass to set it all over again every time you need to play something in an emulator, but hey, it works I guess. I really hope they will fix this with the imminent MIUI 11 and add native support of the ps4 controller on this model cause I will be forced to sell it and I really like my note 7. Thanks again for your help!

Tsibosp said:
Hey it kinda works that way. I mean you have to set it up time after time, after time but it works. So it is the same uncompatibility with the ps4 controller the owners of K20 and K20 Pro are posting about, I just cant figure out why it works fine via bluetooth(minus the insane lag) and not with the otg cable. It's a pain in the ass to set it all over again every time you need to play something in an emulator, but hey, it works I guess. I really hope they will fix this with the imminent MIUI 11 and add native support of the ps4 controller on this model cause I will be forced to sell it and I really like my note 7. Thanks again for your help!
Click to expand...
Click to collapse
no problem , happy to help.
as i said before , i haven't tried it myself but maybe someone else can help with that other issue .
you can also post on xiaomi's reddit thread , maybe someone have a solution for it .

ghst7 said:
What program are you using and what ROM?
Sent from my lavender using XDA Labs
Click to expand...
Click to collapse
hello, I used the Bluetooth Auto Connect (both the most recent version and an old one which some people said that works better) with no luck. Everything works as it should for a minute or so and then lags kick in and everything is unplayable. I use the most recent MIUI Global 10.3.10. Waiting for the MIUI 11 update any day now.

The last time I used my Xbox One S controller was fine (I know its not your case) but I flashed a module from magisk to use it, and I see one for the ps4 controllers in the repos. Maybe it helps?

Tatoh said:
The last time I used my Xbox One S controller was fine (I know its not your case) but I flashed a module from magisk to use it, and I see one for the ps4 controllers in the repos. Maybe it helps?
Click to expand...
Click to collapse
do you have to be rooted for that? I run official MIUI 10, soon 11. I really dont want to bother with roots, custom APKs etc.

Tsibosp said:
Hello I really need some insight with this. I just bought an otg cable for pairning my redmi note 7 with my ps4 controller because I couldnt fix the input delay via blutooth and the continuous connect fix was not working for me(with both new and old version of the program) . When I paired the controller with the cable nothing happened, I then tried with my ps3 controller again nothing happened.They just charge and that's it, no inputs. When i put a mouse on the otg cable the mouse worked normally. When I tried it with my friend's Mi9t everything worked fine ! I tried the USB debugging settings etc, still the same. Is there any way to fix this?
Click to expand...
Click to collapse
i just bought an otg cable and i'm facing the same problem as you , did you fix it yet ?
if so please share the solution . thanks in advance.

EgyBob said:
i just bought an otg cable and i'm facing the same problem as you , did you fix it yet ?
if so please share the solution . thanks in advance.
Click to expand...
Click to collapse
https://in.c.mi.com/thread-221458-1-1.html
It works for me this way but you have to set it up every time and it's kinda annoying. Sometimes it takes a minute or two once im in the emulators to recognise the control schemes.

Tsibosp said:
https://in.c.mi.com/thread-221458-1-1.html
It works for me this way but you have to set it up every time and it's kinda annoying. Sometimes it takes a minute or two once im in the emulators to recognise the control schemes.
Click to expand...
Click to collapse
i tried that method but the controller ps3 isn't being detected by the phonenor in the app -when i connect it it says "device is dead" , and the ps4 controller is detected in the app but not in game nor controlling the phone/home screen .
which controller is working for you ? is it working for you outside the emulator games ? if so , which games ?
and btw , is your phone rooted or not ?

EgyBob said:
i tried that method but the controller ps3 isn't being detected by the phonenor in the app -when i connect it it says "device is dead" , and the ps4 controller is detected in the app but not in game nor controlling the phone/home screen .
which controller is working for you ? is it working for you outside the emulator games ? if so , which games ?
and btw , is your phone rooted or not ?
Click to expand...
Click to collapse
Im using the PS4 controller. Sadly my PS3 controller is busted and I cannot test it in order to help you. Yes it is working outside of games with the method described above. You just use it as an alternative input method, so in other words you forfeit the keyboard and you use the controller as an input method. You cannot use the keyboard at the same time and after you disconnect the controller you need to reverse the default input method back to the keyboard in order to use the phone. Its not plug and play, you have to set it every time as I mentioned above but at least it works this way with little to no lag. I have tried it with Mame, Epsxe, Retroarch, PPSSPP, everything works I had no problems with any of the games I tried. My redmi Note 7 is not rooted and runs all the latest updates.

Tsibosp said:
Im using the PS4 controller. Sadly my PS3 controller is busted and I cannot test it in order to help you. Yes it is working outside of games with the method described above. You just use it as an alternative input method, so in other words you forfeit the keyboard and you use the controller as an input method. You cannot use the keyboard at the same time and after you disconnect the controller you need to reverse the default input method back to the keyboard in order to use the phone. Its not plug and play, you have to set it every time as I mentioned above but at least it works this way with little to no lag. I have tried it with Mame, Epsxe, Retroarch, PPSSPP, everything works I had no problems with any of the games I tried. My redmi Note 7 is not rooted and runs all the latest updates.
Click to expand...
Click to collapse
thanks for the respond , i got the ps4 controller to work in the emulator PPSSPP . although that's not what i was trying to solve , i wanted to use the controller in games/apps -the ones you download from the play store like FIFA,NFS etc.. - outside the emulator. but i think i'll have to root my phone to remap the touch control for these games.
i'll have to wait for a week to unlock the bootloader then i'll try again after rooting.
thanks again bro <3