Database Users

Drivemode jijia apk easy connect

Hi. My head unit use the app easy connect and it install on phone the app Drivemode (yijia) but when i open it show the update screen to 1.5.22 and crash
Someone can pass me the last apk?
Inviato dal mio SM-G920F utilizzando Tapatalk

I am having the same issue
I have attempted to use the MirrorLink fuction with a Joying Quadcore 4.4.4 unit. I tried both an Asus Zenfone 2 and a Nexus 5X. The Drive Mode installs on the mobile phone and then says it requires an update. You have no choice but to update as "Later" will not work. The Drive Mode Version 1.5.22 attempts to download and always sticks at 99%. I have searched all over for this APK unsuccessfully.
If you have any luck please update. Thanks!

wanahike said:
I have attempted to use the MirrorLink fuction with a Joying Quadcore 4.4.4 unit. I tried both an Asus Zenfone 2 and a Nexus 5X. The Drive Mode installs on the mobile phone and then says it requires an update. You have no choice but to update as "Later" will not work. The Drive Mode Version 1.5.22 attempts to download and always sticks at 99%. I have searched all over for this APK unsuccessfully.
If you have any luck please update. Thanks!
Click to expand...
Click to collapse
Hello,
I've tcpdumped the app and found that the app tries to download this apk: source.carbit.com.cn/package/20160127/CarMan.88888888.2.1.27.release_cec7.apk
Good luck.

easy connect app sux mine only shows Chinese characters can make heads or tails of it smh

the drive mode on mine is good. i installed the one it intalls on the phone and installed the one called drive mode ' search for wuhan carbit for the correct one'
worked for me, and i use it loads

Hi everyone I have just taken a beautiful Xiaomi mi5s pro with MIUI 8.3, I come from a Honor 7.
With Honor I was quietly mirroring with the car radio, a Chinese stereo with android 5.1 which, with Honor, worked perfectly with the easyconnect and drive mode.
Actually, by activating USB debugging, the Cell screen is displayed in the car radio and you can control the touch from the car screen.
With the mi5s instead it connects and plays the phone screen but the touch does not work, if I use it from the cellphone it also moves on the radio, but not inverse. Does anyone know how to solve it?
sorry for my english

Can someone with 1024x600 RK3188 Joying try backing up and uploading mirroring app?

Had to do a factory reset on my headunit because it wouldn't boot. After factory reset the mirroring app is gone. Contacted support and they let me know once it has been reset, it's too late. Can someone try backing the app up to an APK and uploading to see if I can use it?

I can do it for ya tomorrow.

ludester said:
I can do it for ya tomorrow.
Click to expand...
Click to collapse
Hey, never heard from you after this; was hoping maybe you could still help me out. Thanks for the offer and no worries if youre busy or something now

imranh101 said:
Hey, never heard from you after this; was hoping maybe you could still help me out. Thanks for the offer and no worries if youre busy or something now
Click to expand...
Click to collapse
files attached, try it out and let me know

The mirror app has not gone (only the shortcut from jeg desktop has gone) you just have to install it again from the OEM icon on the units desktop. Select the OEM icon, select APK and find the Easyconnect app in the listing. Push it to install it.

HenrikH29 said:
The mirror app has not gone (only the shortcut from jeg desktop has gone) you just have to install it again from the OEM icon on the units desktop. Select the OEM icon, select APK and find the Easyconnect app in the listing. Push it to install it.
Click to expand...
Click to collapse
W.... Wow. I contacted the customer support and they said "Once the unit has been factory reset you will not be able to use the connect function anymore"
Thank you, gentleman and scholar! It does not want to see to want to connect to my phone but I'll chalk that up to the program being buggy and needing a different USB cable.

imranh101 said:
W.... Wow. I contacted the customer support and they said "Once the unit has been factory reset you will not be able to use the connect function anymore"
Thank you, gentleman and scholar! It does not want to see to want to connect to my phone but I'll chalk that up to the program being buggy and needing a different USB cable.
Click to expand...
Click to collapse
They say the same on their homepage (that its gone after reset) - but we know better
BTW i haven't succeeded either in connecting my iPhone using the connect function. No big deal, I can't se what i would use it for. Almost any program i could think of mirroring to the unit can be installed directly on the unit, so why bother with mirroring

ludester said:
files attached, try it out and let me know
Click to expand...
Click to collapse
Is it the last in Malaysk?
Inviato dal mio SM-G920F utilizzando Tapatalk

FWIW, the EasyConnected app doesn't work with iOS 9 AirPlay mirroring (same as most other third party mirroring apps).
If you are looking for an alternative, Splashtop's Mirroring 360 works well for me on my Joying HU.

Tabs78 said:
Is it the last in Malaysk?
Inviato dal mio SM-G920F utilizzando Tapatalk
Click to expand...
Click to collapse
Yes it is, and it is working:good:

Can you confirm either installing from the OEM folder, or the download worked? I want to install malaysk ROM, but I have the same issue, need the mirroring, and now joying have also responded "fac reset will erase license and you only get 1". I really dont get this approach, they shpuld give better info, but anyway, hoping you had an update on this.
Also, how well does it work overall? I am just getting started, so any heads up would be great.

I had the Easy Connect app working fine with my phone prior to installing Malaysk's ROM. After reinstalling Easy Connect, I had my phone connect once, then the HU told me that the cable was bad, and now I cannot connect at all (Keep getting 0x11 error).
Any suggestions on how to make it work again?

I can now state that installing Malaysk's ROM and reinstalling Easy Connect does work*. I am pleased to say that I have used the screen mirroring to my satisfaction. (But, I cannot say what happened to get it to work, it just kind of happened).
Unfortunately, the phone initially goes into "Drive Mode" which, aside from being annoying, does not allow use of the Head Unit's screen. So, I must fiddle with my phone even longer in order to get out of that mode so I can use the mirroring correctly.
I also have not found a good way to force the phone to be in landscape mode. The one app I found that put it into that mode correctly had issues that interfered with other phone features to such an extent that I decided removing the app was my best option.
*This assumes the phone and Head Unit paired in the first place. My first Head Unit (Single Core) would never pair at all (before or after root).

My phone (HTC M8) just updated to the latest ROM (Marshmallow, maybe), and now Easy Connected does not work. It goes through all the motions, but the Head Until stays dark. Hopefully something changes soon.

NYCAR said:
My phone (HTC M8) just updated to the latest ROM (Marshmallow, maybe), and now Easy Connected does not work. It goes through all the motions, but the Head Until stays dark. Hopefully something changes soon.
Click to expand...
Click to collapse
Same issue here with the head unit staying dark. Any update here?

Update EasyConnected.
See this thread

Hey everybody i have a problem with Easy connected in Honda connect by HRV and i have an error 0x11 its adb-ec not found not exist. Whats is this?

Mirror Link on Nexus 6P?

Has anyone been able to get Mirror Link up and running on the 6P? It's not one of the certified products for Mirror Link but there are zips to get the server and apk running.
I would try it but I dont have a compatible car yet, hopefully soon XD

Add persist.debug.wfd.enable=1 to the bottom of your build.prop file in the system folder, save, and reboot. Enable miracast in the cast settings in the settings app as well with the 3 dot menu. You'll need root to do it.
I'm using miracast to cast to my appradio

Yup this works
Sent from my Nexus 6P using XDA Premium HD app

crash822 said:
Add persist.debug.wfd.enable=1 to the bottom of your build.prop file in the system folder, save, and reboot. Enable miracast in the cast settings in the settings app as well with the 3 dot menu. You'll need root to do it.
I'm using miracast to cast to my appradio
Click to expand...
Click to collapse
Sorry if this is redundant or off track, but could you please explain further. I added "persist.debug.wfd.enable=1" to build.prop via root explorer text editor and saved. I rebooted the phone then navigated to Settings/Display/Cast, hit the three dot menu and selected "Enable wireless display", nothing appeared. Am I missing something? I'm on 6.0.1, rooted, stock with a 2016 Subaru with Clarion HU.

The only other thing I did was turn Wi-Fi on

Mirrorlink (usb connection) is different to Miracast (WIFI) so are people giving advice on getting Miracast working when the OP asked about Mirrorlink?

Zetsubou Sensei said:
Has anyone been able to get Mirror Link up and running on the 6P? It's not one of the certified products for Mirror Link but there are zips to get the server and apk running.
I would try it but I dont have a compatible car yet, hopefully soon XD
Click to expand...
Click to collapse
Bump

@OP
Can you provide the ZIPs, so I can try in my car?

JoeyXD said:
@OP
Can you provide the ZIPs, so I can try in my car?
Click to expand...
Click to collapse
Zips to what?

400ixl said:
Zips to what?
Click to expand...
Click to collapse
Has anyone been able to get Mirror Link up and running on the 6P? It's not one of the certified products for Mirror Link but there are zips to get the server and apk running.
I would try it but I dont have a compatible car yet, hopefully soon XD
Click to expand...
Click to collapse
I guess it's a zip archive with APK and some other stuff?

JoeyXD said:
I guess it's a zip archive with APK and some other stuff?
Click to expand...
Click to collapse
What exactly are you trying to do? The tweak to the build.prop listed above is all you need to enable Miracast devices on the 6P. And that is the only way to do it, AFAIK. It worked for my phone to cast my phone to my Pioneer NEX stereo.

jejb said:
What exactly are you trying to do? The tweak to the build.prop listed above is all you need to enable Miracast devices on the 6P. And that is the only way to do it, AFAIK. It worked for my phone to cast my phone to my Pioneer NEX stereo.
Click to expand...
Click to collapse
OP is talking about MirrorLink (mirrorlink.com), not Miracast and as far as I know, those two are different things. What i'm trying to do is connect my phone to my car with MirrorLink technology (which is more than just screen casting).

Mirrorlink is something built into the device, either your car has it, or it doesn't. There are no zip files to install. On the phone side you need the appropriate vendor client app installed. It isn't more than screen casting really, it just has a wrapper that controls what the casting apps can and can't do like chromecast. What mirrorlink enabled car stereo do you have JoeyXD?

My car does have MirrorLink built-in and it works with other phones (i.e. Galaxy S5). But as OP mentioned in his first post, Nexus 6P is not certified MirrorLink device. So to put it simple, is there any way, to make Nexus 6P work with MirrorLink enabled car "stereos"?

JoeyXD said:
OP is talking about MirrorLink (mirrorlink.com), not Miracast and as far as I know, those two are different things. What i'm trying to do is connect my phone to my car with MirrorLink technology (which is more than just screen casting).
Click to expand...
Click to collapse
I was referring to it as how I use it, sorry. My Pioneer NEX stereo has Mirror Link and I connect to it using a Miracast device, Screen Beam Mini2 plugged into the HDMI port. Or at least, that's how I believe it works, using Mirror Link.
And you're right, it can do more than mirroring with the right app. I use App Radio Unchained and have the full functionality of my phone on my NEX. Pretty neat stuff.

jejb said:
I was referring to it as how I use it, sorry. My Pioneer NEX stereo has Mirror Link and I connect to it using a Miracast device, Screen Beam Mini2 plugged into the HDMI port. Or at least, that's how I believe it works, using Mirror Link.
And you're right, it can do more than mirroring with the right app. I use App Radio Unchained and have the full functionality of my phone on my NEX. Pretty neat stuff.
Click to expand...
Click to collapse
If you are using Miracast into HDMI then you are not using Mirrorlink. That is done over USB. AppRadio Unchained does not support Mirrorlink
---------- Post added at 08:19 PM ---------- Previous post was at 08:15 PM ----------
JoeyXD said:
My car does have MirrorLink built-in and it works with other phones (i.e. Galaxy S5). But as OP mentioned in his first post, Nexus 6P is not certified MirrorLink device. So to put it simple, is there any way, to make Nexus 6P work with MirrorLink enabled car "stereos"?
Click to expand...
Click to collapse
What car is it? How are you launching it on the S5? Most head units need the phone to have the application also on the phone end to initiate and control the Mirrorlink connectivity.
The 6P is not Miracast certified either, but that doesn't mean it doesn't work. Maybe a description of how it does work on other phones for that particular car will help diagnose. Mirrorlink essentially works in a similar way to Chromecast without the need for the internet connection. It still needs a client at the phone end to work.

Has anyone figured if nexus 6p can have mirrorlink enabled ?
Thanks

I have a Screen Beam Mini2 and when my nexus tried to connect to the Screen Beam Mini2 it reboots.. I have enabled the wireless display option...

Still waiting on some kind of solution here.
Any updates, guys?

alexandruvlad said:
Still waiting on some kind of solution here.
Any updates, guys?
Click to expand...
Click to collapse
Had MirrorLink functioning on my 2016 Toyota Aygo with a Samsung S7. This was my bosses phone, I have a Nexus 5 - Searching, fruitlessly for a solution. But here is how MirrorLink (Not MirrorCast!!!!!) seems to work in my car.
Hit connection button on screen in car
Connect phone
Wait a few seconds until connection made
MirrorLink apps appear on in-car screen. Phone screen goes black with S7.
Note - It doesn't seem to mirror. It uses certified apps. Which is fine, if the phone even works.
I did read that Google deactivated MirrorLink on their Nexus line because it is illegal to have a MirrorLink device forward of the drivers seat in California. This could just be internet speak.
I am dying to use this feature and not replace my phone

Samsung S7 mirrorlink support Appradio 4

Hope someone could help me with this. I have been using an iPhone for the last 5 years and in such I have a Pioneer Appradio 4. I am trying to see if I could make the android jump and purchase a S7 edge.
My Appradio supports mirrorlink as well as Appradio live which is garbage.
What I have been reading is there is no Mhl / hdmi support on an s7. However mirrorlink is available on the phone. Is anyone able to confirm that the S7 will connect via mirrorlink on my Appradio? I have been looking everywhere for an answer but most of the stuff is for the older galaxy phones. Sorry if I'm a bit ignorant to searching android stuff I've been chained to iOS and CarPlay for too long.
*Side question-- with Miracast do you lose all connectivity to cell data?
Thanks for all the help in advance

If your Pioneer Carplay head unit supports also Android Auto you can use this method for connecting.
Miracast doesn't interfere with the phone running data connections (wifi or mobile).

Unfortunately it doesn't support android auto. Which is pretty lame.

I dont't know about your head unit, but generally Mirrorlink should work also with the Samsung S7 Edge.

Thanks for the info now my only question is will it work with ARunchained reloaded once this is set I'll be ordering my Galaxy and getting off this iOS nonsense

cynes85 said:
will it work with ARunchained reloaded
Click to expand...
Click to collapse
For that app to work it's required to root the Galaxy S7Edge.
Anyway, if you're not used with Galaxy rooting, Knox and related possible Samsung warranty limitations, you can find these information on the forum. Moreover, to be able to root you need to buy the Exynos version, not the Qualcomm 820.
http://forum.xda-developers.com/s7-edge/how-to/index-samsung-galaxy-s7-edge-t3382679

Okay good I found it on the website it has the exynos processor. Once it's rooted and I change everything I should be able to run this app then? I messaged Area51 hopefully he will message back regarding it. Thanks again for all the info and help.

cynes85 said:
Once it's rooted and I change everything I should be able to run this app then?
Click to expand...
Click to collapse
IMHO yes.

themissionimpossible said:
IMHO yes.
Click to expand...
Click to collapse
Thanks again for all the info! Hopefully it works out well.

Yes it works
I can confirm you that Galaxy S7 works with mirrorlink and the AppRadio 4. The sound and video quality are simply perfect. I have been using MHL before with Sony Xperia and ARU, mirrorlink is better. The only issues are the restrictions that mirrorlink implements in the navigation, no recent apps none slide notifications, etc. Hope some friend could mod "Samsung Mirriorlink.app" to break freee these limitations but also in the current situation i recomend you to use mirrorlink with Galaxuy S7 because as I said, the stability and quality are just perfect.

appradio 4 mirror link
did u have to disable android auto?
lacalo said:
I can confirm you that Galaxy S7 works with mirrorlink and the AppRadio 4. The sound and video quality are simply perfect. I have been using MHL before with Sony Xperia and ARU, mirrorlink is better. The only issues are the restrictions that mirrorlink implements in the navigation, no recent apps none slide notifications, etc. Hope some friend could mod "Samsung Mirriorlink.app" to break freee these limitations but also in the current situation i recomend you to use mirrorlink with Galaxuy S7 because as I said, the stability and quality are just perfect.
Click to expand...
Click to collapse

so it will only work with rooting your s7 edge? if so how do I root my s7 edge? I to want to use mirrorlink with the sph-da120

I Just installed the SPH-120 and I can only get my Galaxy s7 to connect to blue tooth. Tried the developer mode with USB debugging, Switched to MTP configurations, and both USB ports along with multiple APPS. and I cannot get it to connect.
When I connect to the second USB port, Both the phone and radio attempt to connect but the phone screen shuts off and the radio says incompatible USB (original cable).

Hi how do you connect wich cables you use to get it working like you say?
lacalo said:
I can confirm you that Galaxy S7 works with mirrorlink and the AppRadio 4. The sound and video quality are simply perfect. I have been using MHL before with Sony Xperia and ARU, mirrorlink is better. The only issues are the restrictions that mirrorlink implements in the navigation, no recent apps none slide notifications, etc. Hope some friend could mod "Samsung Mirriorlink.app" to break freee these limitations but also in the current situation i recomend you to use mirrorlink with Galaxuy S7 because as I said, the stability and quality are just perfect.
Click to expand...
Click to collapse

josay89 said:
I Just installed the SPH-120 and I can only get my Galaxy s7 to connect to blue tooth. Tried the developer mode with USB debugging, Switched to MTP configurations, and both USB ports along with multiple APPS. and I cannot get it to connect.
When I connect to the second USB port, Both the phone and radio attempt to connect but the phone screen shuts off and the radio says incompatible USB (original cable).
Click to expand...
Click to collapse
I just created an account here so I can add a reply in case anyone struggles to get MirrorLink to work. I got an SPH-DA120 to work with my Samsung S7 Edge. I went through the same process of connecting the phone, seeing the connected message on the phone screen, and then the SPH-DA120 screen says "Incompatible USB." I thought it was an error but it was simply my failure to understand MirrorLink. You have to first get a certified MirrorLink app on your phone and then choose the home button (or whatever it is...looks like a Windows 7 start menu) and your certified MirrorLink apps will show up there. When you choose the USB/Ipod2 source the HU will always say "Incompatible USB." In my case I used RockScout, which then gives you access to everything on the phone by selecting a "Choose Source" option--that mirrors your phone's screen and provides a gateway to everything on your phone.
Maybe this process is common knowledge about MirrorLink but I spent way too much time googling this and trying random things to get the phone to connect. Something else worth noting is you need a high quality USB cable. The HU seems fine with USB extensions (even cheap ones) but it requires a high quality cable to connect to the phone. Some work, some don't. Not even all Samsung cables work.
One more thing...I actually contacted Pioneer's customer support to get assistance with this. To my surprise they replied to my initial email within an hour. That's impressive for customer support at a large company like that. Admittedly I figured out that the USB cable was the problem shortly after I sent the email but the quick response from them was nice.

Can somebody confirm if a non rooted Galaxy S7 can MirrorLink using rockscout while in motion using the 7000nex soft touch bypass? Trying to mirror every app and function while in motion using the nex. This includes YouTube, Google maps, chrome etc

Great information here. I just started driving a Jeep with appradio 4 in it . I have a galaxy s8 plus. Any advice what to do?

Still stuck with my note 8. Stock android Mirrorlink works but very limited. I tried with rockscout, button savior, LG mirrordrive app etc to screen mirror my phone but n way. The only fault is with Messenger pop-up showing nicely on my car screen. So I tried rooting my phone with magisk and hide my root but the Mirrorlink app is not working anymore. When connected to my phone it says authentification not valid... and the database is no more the same when I want to add some apps in pkgnames...

Hi,
I have problem with mirrorlink pioneer sph-da110 with galaxy s7 edge when I connet via usb I see mirrorlink in appradio. I click in mirrorlink then I see Lg Mirrordrive an I choose this after that I have dark screen and nothing else happens. Somebody can help my where is problem?

New apple CarPlay usb dongle for android headhunts and tablets.

The above video is my review, i have it working great with my ownice c200 headunit. the usb seems to register that to the iPhone that it is a CarPlay device. the CarPlay UI apparently is stored and sent from the iPhone its self to the usb dongle and then sent to the android app. the app then sends touch and audio commands back to the usb dongle and then to the iPhone.
i can send photos of the internals of the device to any one who wants and a link to the APK.
MOD EDIT: removed email address and mention of selling head units. XDA is not a place to make money!

great !!!

i can send photos of the internals of the device to any one who wants and a link to the APK.
Can you send me?

New firmware update allowing the box application to work in the background.
https://drive.google.com/drive/folders/0Bym9XrdeViekOTF1VWRoaTlkb1E?usp=sharing
First Step: updating the CAR PLAY USB DONGLE
Plug in the car play usb dongle on the PC, copy the "update.bin" file under the root of the dongle, no extra file folder and no any operation, just wait for 5 minutes, it will be quit automatically after updating, then pull off the USB dongle.
Second Step: Uninstall the old version ZBOX softare from the car audio, then intall the new one, then it will be ok to work.(With the new APK in the attachment and follow the manual)

Hey all, I made a quick video review on the usb dongle

vassandrei said:
Hey all, I made a quick video review on the usb dongle
Click to expand...
Click to collapse
I'm interested in one of these units, how can I purchase? Thanks.

URL REMOVED

[/COLOR]
vassandrei said:
Hey all, I made a quick video review on the usb dongle
Click to expand...
Click to collapse
The issue you are experiencing with the zbox having 'stage-fright' has to do with the power requirements of the zbox device. Some USB bus' don't provide enough power (or borderline) so functionality is intermittent. If you use a powered USB hub, that provides additional power to the USB ports, you'll have almost no issues.

I have connected a y USB adapter.

Has anyone tried one of these on a PX3 RK3166 head unit?
I have one but cant get it to work.
It connects to the apk but wont connect to the iphone.
Tried the update to firmware and apk, still no joy.
Not sure if i have a faulty dongle or it's a compatibility issue with these head units.
Alibaba seller suggested not enough power on head units usb?

I have the same problem with one of these.....
I have tried three android units now and I still can’t get them to work....
Android 4.4 it says its connect but the iPhone just shows as not found....
The other two are both 6.0.1 and the zbox just shows connecting all the time!
If any one has any help it would greatfully be received..
Or for that matter any software updates.....
Mine is showing apk: 2.1.0
Zbox versions: 2.1.0
Many thanks and kind regards

Mine works and I have a px3. I updated the device and installed the latest zbox app before I tried it. I would try swapping out cords and making sure they are certified by Apple. The only issue I have with mine is that it cannot be controlled from the steering wheel.
Sent from my iPhone using Tapatalk

I use a second usb-plug and a y-cable to provide sufficient power to the device.
What do you guys do with regards to phone calls? My phone is obviously paired to the head unit via Bluetooth, so whenever I get a Call, it jumps out of CarPlay/zbox to the Stock phone interface, however the phone still transmits the audio to carplay and not via Bluetooth by default.
How any of you solved that problem?

If you are using CarPlay why do you have Bluetooth paired? Every car I've been in with CarPlay diconnects the phone from Bluetooth.
Sent from my iPhone using Tapatalk

Android Auto
Is there also a solution for Android Auto on Android Head Units ?

MarciDev said:
Is there also a solution for Android Auto on Android Head Units ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/ge...ndroid-4-1-headunit-reloaded-android-t3432348

I have an Eonon GA7157 running a:
CPU: Allwinner R16 1.6GHz Cortex A7 Quad-Core
RAM: SAMSUNG DDR3, 1GB
Storage: 16GB
I have tried App and Firmware 2.x and 3.x. No joy. All I get is "Connecting" when the usb dongle and app is started. It never gets passed this "Connecting..." stage. USB devices like keyboards, mice, USB Flash drives, and even video camera work fine on this headunit. The Zbox Z1 and an OTA tuner don't work for some reason.
I did some more troubleshooting and found out the following: The dongle works perfectly on my PC running Remix. I also tried it on Samsung Table A; on this one, same symptom as the head unit, so I tried using an OTG cable and what do you know, it worked perfectly.
Therefore, I have 2 possible explanations: The headhunt's USB cable needs to be hardwire as OTG or Eonon somehow has decided to block certain type of USB devices that request data asynchronously. Why? I have not clue... I wish I could disable this flag in the OS, but I have not clue where it can be done. My headunit is rooted, so it should be possible in theory.

Hello, could you post pictures of the internals? I'm very curious what's inside the lil dongle. Also: do you still have some of the dongles? haha

osxdude said:
Hello, could you post pictures of the internals? I'm very curious what's inside the lil dongle. Also: do you still have some of the dongles? haha
Click to expand...
Click to collapse
You can buy one for $75 from Aliexpress. There is a video of the internals: check this out:
https://www.youtube.com/watch?v=VnS_TP18VBk
This guy has done a few videos on the unit.

Hey, can someone help me to find the Zbox Z APK 3.0 to Download in English?
I have the 3.0 in Chinese only. And the 2.1 doesn’t work. My Firmware is 3.0