(sry for my bad English)
Hi everybody,
Normaly I have a CAN-L01.
My Huawei are bricked and with so many manipulation my product Model are changed on CAZ-(????) (saw by dc unlocker ) (no exactly)
And even if I extract img to Official firmware B100 Can L01 : CUST, boot, recovery, userdata, system and flash it with any error, my products model stay in CAZ-... Help me please.
I think that if i don't correct the problem, I I don't unbricked my huawei...
Related
Hola everybody.
I have a Huawai P8 (EU) with 5.0.1 Lollipop stock firmware (B200). I've installed it with fastboot (flash recovery, boot, system and cust) and it works (my recovery is TWRP). Now I want to do the same but with Android 6 (B321). I've tried to install with fastboot but i'm stuck in bootloop. I've also tried to put the UPDATE.app it the dload/ folder but i'm stuck at 90% of the installation (with the huawai recovery).
Anyone can help me ?
Thanks !
PS : All firmware are from hxxp://huaweifirmware.com/huawei-p8
Hi brother,I got the almost the same problem with you. I just know that,Android 6 and Android 5 are very different .If you have updated to 6, go back is very difficult,and also use three buttons to flash can't be work. I'm in trouble too and good luck !
Hi,
I have an unlocked and rooted P8 Lite (ALE-L21) with TWRP 2.8.7.0 (I think that's the version) and I had a google play problem so after trying all solutions that I found it didn't work so i used the advanced wipe function that offers TWRP but accidently i wiped system part so I don't have any OS in my phone and now I have a bootloop. I downloaded a firmware "ALE-L21 V100R001C432B052 Europe channel dual sim" but I didn't know how to flash it because i'm new at huawei phones i was an expert in samsung devices however i don't know how to flash the UPDATE.APP file that I found in the dload folder with TWRP can you help me ? (I can't boot into the bootloader mode i can only boot recovery mode (TWRP) )
Thanks for reading that post ^^
Hello,
You can unbrick your device using this method Unbrick Huawei P8 Lite Ale-L21
Simply boot into bootloader(Plug phone into PC and hold volume down+power button, when phone vibrating release the buttons) when is in bootloader run bat(FLASH-ALL.bat) file in archive
This will install Firmware version C432B052 after that you can update via OTA
Regards
Thanks for replying to this post, I searched a little bit more and I found a software called "HuaweiUpdateExtractor" I extracted 4 files from my UPDATE.APP with that software : system, cust, recovery, boot and then flashed them with fastboot but I can't acces to my bootloader with the 2 volume buttons + power it give me an error so i used TWRP I went to Reboot then Bootloader ^^
Hello,
My honor 8 lite was bricked recently and I tried almost every method to unlock but unfortunately nothing worked. I have my bootloader key also and dc phoenix for 72 hours but nothing working my way. Tried almost every update file available for my build and nothing worked. Help required from genius developers of XDA. My region is Pakistan.
Please anyone suggest me the correct firmware link and the whole procedure otherwise my money will be wasted.. bootloader is unlocked and frp locked..
I'm on it via PM, we'll post result once repaired with method used.
He's not replying now.. anyone else can help?
I replied 10 minutes ago..
Sorry I got it now
So, while your downloading firmwares, i'll post what I told you on PM.
"
Ok, so I think you did not rebrand your phone:
-You installed wrong region with FF (in fact right region but for huawei variant not honor variant). So your phone does not boot to normal mode anymore, it's normal.
-You then flashed different firmware via DC-Phoenix.
These steps alone does not rebrand your phone...
I think your honor 8 lite c185 honor variant is LA1 or L21HN (and not the huawei gr3 2017 variant).
1) Download this oreo service repair firmware 8.0.0.363(C185)*:
http://androidhost.ru/9dg
To install, you will have to boot in 'firmware mode' aka dload mode, and used an exfat formatted SDcard or USB-OTG. There is 3 flashes to do ; instructions are inside.
2)If working with this oreo service repair firmware, we'll then unlock Bootloader and bootloader's FRP, then we'll use Normal ota or twrp+HuRUpdater to update to 8.0.0.382(C185) with these 3 files:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2312/g1699/v172010/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...10/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/..._meafnaf/update_full_PRA-L21HN_hw_meafnaf.zip[/QUOTE]
3)OREO service repair may not work if you are still with nougat partition scheme,
if so you'll have to download a NOUGAT service repair : https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=53498
Done doing 1)
First, big .app flash via dload
Second, small . app flash via dc-phoenix as device won't boot to firmware mode
Third, big .app flash via dload
Device restored !
Honor 8 lite back alive again with oreo..
But I am going warn everyone who's new to all of this.. Don't try to update by yourself.. Get guidence from someone here and then try to update your phone only if you have bootloader unlocked and frp too..
oslo83 said:
Done doing 1)
First, big .app flash via dload
Second, small . app flash via dc-phoenix as device won't boot to firmware mode
Third, big .app flash via dload
Device restored !
Click to expand...
Click to collapse
Thank you very much for all your support..
I got a LG K8 K350n S/N: 604CYUK133022
Starting it into system it goes into a infinite bootloop.
Starting it into Recovery or Download mode it just turns off.
Every start there is the alert about the device being corrupt.
If you need further Information just write me.
I want to flash stock firmware, but have several problems with it:
The bootloader and the recovery doesnt start. So I need a solution without them. Could the SP Flashtool be a solution for me and if, do I need a MT6735 or a MT6735m Scatter?
I dont know, if its possible to flash kdz images with SP Flashtool. So i propably have also an Problem finding a matching image. On https://lg-firmwares.com/lg-k350n-firmwares/ are only kdz images. What are the differences between the images in the same language and which image do i need?
Thank you for reading my bad english and for helping
Hi everyone
I hope someone can help me with this:
I'm trying to root my huawei p9 lite vns-l31 C185 B397
1- FRP and bootloader unlocked
2- I tried flashing and booting into TWRP recovery in fastboot mode using (twrp-3.5.2_9-0-a5y17lte.img) latest version but the phone always gets back to (erecovery)
and i wasn't able to validate the link for the specific device model
download twrp-3.1.1-0-venus.img
3- I tried rooting using Magisk by patching and flashing the (boot.img) file from (UPDATE.APP) file from this ROM (Huawei_P9_Lite_VNS-L31_C636B170_Asia_6.0) which is in different region than my original firmware
eventually I got stuck at ("Your device is booting now")
does anyone have an idea how to fix the problem?
aramous said:
Hi everyone
I hope someone can help me with this:
I'm trying to root my huawei p9 lite vns-l31 C185 B397
1- FRP and bootloader unlocked
2- I tried flashing and booting into TWRP recovery in fastboot mode using (twrp-3.5.2_9-0-a5y17lte.img) latest version but the phone always gets back to (erecovery)
and i wasn't able to validate the link for the specific device model
download twrp-3.1.1-0-venus.img
3- I tried rooting using Magisk by patching and flashing the (boot.img) file from (UPDATE.APP) file from this ROM (Huawei_P9_Lite_VNS-L31_C636B170_Asia_6.0) which is in different region than my original firmware
eventually I got stuck at ("Your device is booting now")
does anyone have an idea how to fix the problem?
Click to expand...
Click to collapse
- Install TWRP 3.1.0.2
Link
- Download Magisk.zip file
https://androidfilehost.com/?fid=673791459329054316
- Download and install Magisk manager 5.4.0
- Enter TWRP and flash Magísk.zip
- Reboot
Or, you can root your phone by installing SuperSu 2.8.2.zip in TWRP.
Awesome ! all done ! thanks a lot for your help !