I got a LG K8 K350n S/N: 604CYUK133022
Starting it into system it goes into a infinite bootloop.
Starting it into Recovery or Download mode it just turns off.
Every start there is the alert about the device being corrupt.
If you need further Information just write me.
I want to flash stock firmware, but have several problems with it:
The bootloader and the recovery doesnt start. So I need a solution without them. Could the SP Flashtool be a solution for me and if, do I need a MT6735 or a MT6735m Scatter?
I dont know, if its possible to flash kdz images with SP Flashtool. So i propably have also an Problem finding a matching image. On https://lg-firmwares.com/lg-k350n-firmwares/ are only kdz images. What are the differences between the images in the same language and which image do i need?
Thank you for reading my bad english and for helping
Related
hey guys I have a lg e445 somewhat soft brick
it stuck in boot loop no recovery no fastboot
only I can go into download mode
but I have tried to flash with lg support tool, lg software updater etc.
when flashing started it goes to 4% to 5% and then says phone not found
so I want to ask you people
since this phone has a mediate (mtk6575) processor can I flash it with spflash tool
if yes then where I go to download firmware files to be used in sp flash tool
if no then what I have to do to revive phone again
note:- in past I have successfully recover this phone from soft brick 2 times. but this times problem level is little bit high.
help me.....
Well, I searched for a solution for a long time but I couldn't find one.
I accidentally flashed CloudyG3 2.5 on my LG G2 Korean LG U+ Variant (F320L).
I got HS-USB Diagnostics 9006 on my device manager and I managed to recover it via this thread.
I couldn't use the tool right way cause they didn't have my variant, so I extracted images from F320L TOT and replaced those aboot.img, laf.img, etc.
I got into the download mode and launched LG FlashTool (the TOT FlashTool) and loaded up my TOT and DLL on the tool and attempted to flash.
BUT the error "CrossDL [F400] to [F320L]" was shown in the log.
I think this problem is caused by flashing G3 ROM on my G2, changing the model name in system partition.
I have no idea how to solve this problem.
I tried flashing all kinds of g2 dll, but failed.
I considered flashing the G3 firmware, change the information on the phone, and re-flash g2 firmware, but I think that's gonna make the problem more difficult...
I tried booting into recovery and flash g2 custom firmware, but no recovery mode.
I tried fastboot mode, but phone just says "Security Error" and won't let me get into fastboot mode.
What should I do?
Please ask me if you don't understand exact situation. Sorry for my bad english...
try https://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033
amin44 said:
try https://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033
Click to expand...
Click to collapse
Thanks. I had a different problem, but fixed it.
Could you write how did you fix it so if someone need it
Hello mates, I have problem and I hope that someone can help me.
I have samsung sm-j5008 dual sim and someone messed about software. the phone memory was full and cpu rate terible.
I have tried with Odin but the phone didn't want to go to download mode. I have found so called clone with boot, recovery ana scatter files and flashed it with SP flash tool
now the pc recognize it and starts. wondershare mirror also shows picture buy the display does not show picture, the touch works.
DOes someone have original firmware or custom rom with recovey, boot. scatter files so I could flash it with SP flash tool?
pleasee....
Hello if you want original firmwares go there https://www.sammobile.com/firmwares/
I mistakenly flash the wrong recovery image (twrp, then back to stock when twrp did not work) using fastboot. Just gave up on flashing the recovery and after a few months, I need to factory reset my phone and forgot that my recovery is corrupted or not working. After resetting and my phone rebooted, it just bootloop in the asus logo.
tried entering fastboot and recovery mode but it is no longer working.
So I googled and read that the only way to unbrick my phone is flash it with SP Flash tool. Can you help me find the correct firmware for my device? Or maybe i just need the stock recovery.img and flash it with SP flash tool with the correct scatter file.
My device is running the latest firmware when it was bricked.
Please help. Thanks.
Flash this Rom. It will unbrick your phone and back to 6.0. You'll need to update your firmware again manually.
H t t p s : / / drive.google.com/open?id=0BzBzT9RsAkiganBJUV8xZVRKUEE
lazysnake said:
Flash this Rom. It will unbrick your phone and back to 6.0. You'll need to update your firmware again manually.
H t t p s : / / drive.google.com/open?id=0BzBzT9RsAkiganBJUV8xZVRKUEE
Click to expand...
Click to collapse
Thanks, already restored my phone by flashing it with SP Flash tool and updating it manually with the official firmware.
Thanks for the information and ROM provided using SP Flash. I am now back at 6.0. What tools/firmware is required to update it manually to the latest 7.0 version? Tapping Settings -> System -> Check for Updates does not appear to do anything.
Hi, i've got a Zenfone 3 Max ZC520 bricked (it stucks on ASUS logo after i tried to install the SuperSU), when trying to install this firmware it shows me ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004).
How can I unbrick it?
Thank you.
Hi,
By mistake i've locked my bootloader with twrp custom recovery installed and now every time i boot my device it stays stuck in boot screen.
I've tried to change the firmware via download mode using LGUP but every time i try to change it i get the "error: 0x81000302, please use latest dll. LAF protocol version is not match, dll= 101671104, device= 104521760" which seems to be because of the common.dll file that i can't find.
Whilst searching for an answer i've came across this tutorial: https://forum.xda-developers.com/lg-v30/how-to/using-lgup-crossflashing-t3780969 but i can't find "Partition Dl" option in LGUP.
So can you please help me to unbrick my device?
Thanks.
I managed to unbrick it in the end. this topic can be deleted.
I got a better idea.
Before closing this thread, why don't you write what you did to unbrick the phone?
How does that sound?
Lg bridge would probably unbrick phones with most issues
https://www.reddit.com/r/lgg6/comments/dkjhdl
His topic on reddit if someone needs. LG Bridge worked for him.