Warranty - Need to return to stock? - ZTE Axon 7 Questions & Answers

ZTE axon 7 running Resurrectionremix
Gf dropped it, scratched the top speaker grill and the power button is permanently jammed in. I read that zte has a replacement plan that's like $80 to replace the device. Will I need to return the device to stock before sending it in, or will it be okay?

thehritzinator said:
ZTE axon 7 running Resurrectionremix
Gf dropped it, scratched the top speaker grill and the power button is permanently jammed in. I read that zte has a replacement plan that's like $80 to replace the device. Will I need to return the device to stock before sending it in, or will it be okay?
Click to expand...
Click to collapse
The plan is $80 if it is unlocked. So I think you don't have to restore it to stock. but if you want to, you'll probably need the power button

Related

Volume keys beneath the cover falling apart

I've been using the HD for two months, and the volume keys beneath the cover appear to have their plastic falling apart, revealing the tiny electronic parts underneath.. anyone else encountered it?
cytokine said:
I've been using the HD for two months, and the volume keys beneath the cover appear to have their plastic falling apart, revealing the tiny electronic parts underneath.. anyone else encountered it?
Click to expand...
Click to collapse
I'm also having the same problem. I been using my HD for around 7 months though. The volume down cover cracked and after awhile, the whole cover fell off. I wonder if this is a defect and will be covered by the warranty.
It's strange, but I find the button feels better without the cover. You get a sort of click when you press on it without the cover.
mine did the same after a week, Still works fine though!
Same here had the HD for 7 months, though I think mines related to using the stylus on the vol down button when entering bootloader mode.
Still works fine though.
Did anyone find out if this is warranty repairable? My volume down button came off after 4 months. I'm just concerned about the resale value!
I pay for Orange Care, so I think I can pay £15 for a replacement, but don't see why I should!
I´ve same issue with volume up button but also still working because there are some parts of it still there.
Don´t know if warranty is covering but I wanna know!
Guru Meditation said:
Same here had the HD for 7 months, though I think mines related to using the stylus on the vol down button when entering bootloader mode.
Still works fine though.
Click to expand...
Click to collapse
i second that.
my buttons rubber got demolished by using a fingernail for getting into the bootloader ...
My internal down volume button is also gone leaving the round brass contact exposed. Still works but yes horrible that it has happened.
Did any of you guys try warranty repair through HTC? The cover under mine has also cracked, which for me means it doesn't have that clunk positive feel and I'm just wondering what the process will be.
Thanks,
Jon
Same issue..
I never expected such an expensive HTC phone to have such basic build quality issues ..
Have placed a complaint with HTC support, trust they would be able to help.
Thanks...
ditto..
mine has also fallen off on the vol down button, no problem as it still works, but like it mentioned, would be worth checking out if its reparable under the warranty before it expires (do we get 1 year faulty parts?)
Well I phoned HTC today and their initial argument that if the button is broken due to usage then the warranty is not valid - Eh? I can't see how that's any kind of defence. Looks like they're trying to bypass the devices having to be of merchantable quality and/or fit for purpose.
They also had not heard of any other volume buttons breaking - whether that's true or not who knows.
I'm sending the phone in tomorrow, for an assessment so I'll update how it goes.
Feedback
jontelfer said:
I'm sending the phone in tomorrow, for an assessment so I'll update how it goes.
Click to expand...
Click to collapse
Any news from HTC? The rubber on my volume up buttons has broken away. This looks like a design fault on behalf of HTC... We should get together to let them know they've got a problem...
My VolUp button also is failing but - the internal(the one under the back cover) is kinda soft and it has its middle pushed in... now my VolUp button is hard to press cuz the outer button (the plastic with back cover) pushed the internal in a bit!!! Since I listen to musid a lot with my Touch HD its a pain to always push the VolUp button!! glad that you have the onscreen buttons!!
oh and about the construction : my HD fell out of my hands today from about a meter high - landed on the floor which was full with little pieces of sand, and slided a bit!! now I have some nice little holes on the front cover on the right top (opposite to the Vol buttons) !! glad that my screen had a screen protector , otherwise my screen would be just f***ed up!! (when I picked up the phone the whole screen was with little pieces of sand - like sandpaper-- I just wiped them of plugged my headphones back in, and everything worked like it did before the fall)
I have the exact same problem. The plastic / rubber on my volume down key has disappeared leaving the microswitch exposed and the volume down not feeling as good. It still works though.
Well my initial call with HTC was very negative - saying that if it's damaged due to use then I'll have to pay. I sent it off to be assessed anyway, good news was that they sent it back repaired by return post. Couldn't have been more pleased.
Well worth sending off.
Jon
Both my Up & Down Volume Plastic is gone the Up Still Works but the Down the Little Brass thingie fell off :-( HTC wants $300 to fix!
what should i do?
Me too......
Just when I was about to sell my HD, (a new LEO is on its way) my down volume key began to fail. Exactly the same peeling off the internal microswitch.
Where did you get yours repaired?
Mine was bought free.(Spain)
Regards.
:-(
If your phones are out of warranty and want to do a self repair, here is the part (used) on Ebay (170408817615) for sale. I have looked high and low for months until I finally found it. The guy says he has 237 available.
tacginc said:
If your phones are out of warranty and want to do a self repair, here is the part (used) on Ebay (170408817615) for sale. I have looked high and low for months until I finally found it. The guy says he has 237 available.
Click to expand...
Click to collapse
IMHO this reference shows an HD part not related to the volume keys.
Not to mention the price......
Regards.

[DEBATE NEEDED] Broken Nexus One Power Button

Hey all.
As you all know, the N1 has a design defect that eventually causes the power button to break down after prolonged use. It's a design issue related to wear and tear. No avoiding this one. Just how long.
Mine got lucky, lasted slightly more than a year. Couple of days back, it eventually caved in.
So now, I'm considering a few options and I'd like to get some feedback from anyone.
If you were in my shoes:
1) Would you repair?
Cost being approximately $100-120 USD. With the phone almost certain to be scratched as part of the repair process. And with that, being certain that the battery button will someday eventually break down again due to the design defect.
2) Get a new phone NOW?
Cost being approximately $575-600 USD. Probably get either a MT4G or Desire HD/ACE.
Pros being = better screen type for multitouch, more ram, more internal hd, bigger screen, better cpu, better gpu.
Cons being = bad screen tech (LCD = crap colors & battery vs amoled), slow ROM updates unless you run custom (which is do, running CM, but official drivers, etc aren't out till the official stuff moves forward as well.), uber bad battery life (though this is subjective, let's say - average 8-10 hours a day), no 2nd mic for noise suppression, no trackball.
3) Wait for dual cores to come out in the next 2-3 months and get one then.
Which means buying at potentially up market costs because the tech is considered new and supply will probably be less than demand.
Would like to hear some ideas from the community. =) Thanks br0s. And uh, sis'. Lol.
1.Repair
2.Root
3.Flash CM7
4.Sell on Swappa
5.Make money from the repair with some spare to put twards new phone.
6.Buy New Phone.
7.??????????????????
8. Profit!
ez
shanxybeast said:
1.Repair
2.Root
3.Flash CM7
4.Sell on Swappa
5.Make money from the repair with some spare to put twards new phone.
6.Buy New Phone.
7.??????????????????
8. Profit!
ez
Click to expand...
Click to collapse
Already rooted. Already on CM. I live in Malaysia. No profit due to shipping costs. Lol.
Maybe you want to try local HTC support? Check the cost for the repair 1st before deciding.
I think repair.. u can trade in low yat plaza .. n1 is still rare in malaysia.. mine got n1 too.. but still lucky no power button issue..
Sent from my Nexus One using XDA App
I sent it to Vodafone Spain technical service (it was still under warranty) and got it replaced by a brand new one.
To avoid a new power button failure, I'm using No-Lock widget and Lock Screen.
I repaired mine myself last week, $40 (aprox) part from eBay, 2 hours work tops and it now works perfectly. I did make some very small scratches in the antenne cover, but I can live with that. Don't regret it in the least, now I'm ready to wait for a dual-core "Google experience" phone...
Besides, once you have the phone open you can make sure the small button inside doesn't move around (glue or small piece of paper), as others have said that that helped in not having the problem again.
lenrek said:
Maybe you want to try local HTC support? Check the cost for the repair 1st before deciding.
Click to expand...
Click to collapse
There' no support for Nexus One in Malaysia. I called HTC Malaysia already. They said I'd have to send it to Singapore.
are-red said:
I think repair.. u can trade in low yat plaza .. n1 is still rare in malaysia.. mine got n1 too.. but still lucky no power button issue..
Don't think trade in will give me much sadly. Repair will cost me RM350. Was thinking of picking up Desire HD at RM1750. *Sam tong.*
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
ToxicDude said:
I repaired mine myself last week, $40 (aprox) part from eBay, 2 hours work tops and it now works perfectly. I did make some very small scratches in the antenne cover, but I can live with that. Don't regret it in the least, now I'm ready to wait for a dual-core "Google experience" phone...
Besides, once you have the phone open you can make sure the small button inside doesn't move around (glue or small piece of paper), as others have said that that helped in not having the problem again.
Click to expand...
Click to collapse
Yeah, I'm considering repairing it on my own. Do you have the process guide? I heard you have to disassemble nearly the entire thing just to replace that board. Was hoping to solder the flex cable if possible. Do share your thoughts, am very keen to hear more.
chowlala, the 3 options given are of different magnitude in terms of objective and cost. Don't get me wrong, I have an N1 with broken power button too.
For now, the best option is to install one of those "power button replacement" software such as AnyUnlock.
If you plan to ditch the N1 later, then wait for the dual core phone. Just buy the phone you like, don't worry so much about the price. And buy the phone online or from Singapore (if not commonly available in Malaysia) coz its definitely cheaper compared to places like Low Yat.
The above is what I will do
colins said:
chowlala, the 3 options given are of different magnitude in terms of objective and cost. Don't get me wrong, I have an N1 with broken power button too.
For now, the best option is to install one of those "power button replacement" software such as AnyUnlock.
If you plan to ditch the N1 later, then wait for the dual core phone. Just buy the phone you like, don't worry so much about the price. And buy the phone online or from Singapore (if not commonly available in Malaysia) coz its definitely cheaper compared to places like Low Yat.
The above is what I will do
Click to expand...
Click to collapse
Agreed. Very true.
Everybody would love to save money obviously.
I can live with the broken power button. I believe it's only a matter of getting used to it. And I'm pretty alright with ADB and running mods on the phone. So updating, etc will still be fine. And I'm currently using the Lock Widget, with Sleep on the pull down notification bar and long press Home to sleep the phone as well. Lol.
Only concern now then would be, how to power up the phone when I'm not near a cable. Anyone got any ideas?
I would love to keep the n1 if I can figure this one out. As of this point, everything is still alright as long as I'm near a cable. But if the phone hangs when I'm not near a cable.
That's a problem. =(
You certainly can live without the power button (I did for over two months) but it is a pain every time you have to power it off/on. The problem became too bothersome for me when needing to fly and when needing to swap sim cards, and not always having a pc at hand.
In any case, the replacement process does need for the entire phone to be disassembled, but the guide at ifixit was detailed enough for me. I did try to solder or otherwise fix the cable before replacing it, but it was impossible (very small, short, flexible and, in my case, it was completely severed). To see the cable you don't need to dismantle the whole phone, just the battery cover and the screws behind it.
After changing the board, I used some cable coating to make sure the button sat firmly and that cable was under as little stress as possible. Lets hope this time it lasts more than 8 months.
Can someone explain what the method is to reinforce the power button (with pictures if possible)?
Also, does this apply to the volume buttons too? On one of my refurbs, the top volume button got unresponsive and was probably dying the same way these power buttons do.
EDIT: didn't see you post before I did. I wonder if it's possible to secure the power button and volume button boards in a way that prevents stress on the cables.
I've been "living" without a power button for more than 4 months now, using a combination of "no lock" and "lock 2.0" to turn the device on and off.
As for the reboot issue, i always have a usb cable at hand and a small portable usb/dc charger when there's no laptop around.
PS I'm on stock.
I don't know of there being a generally accepted way to reinforce the power button. If you search you'll find very different ideas and opinions.
I think that the problem is that the button in the board rests over a metallic support that is part of the structure of the phone. However, the button just rests there, and depending on how you press the power button on top it can move around stressing the cable in the process. After spending some time with the phone open, I think that any solution that fixes the button in its place (glue, paper, o cable coating like I used) should help in reducing cable stress and extending its life. In any case, I don't think any of these solutions are permanent and eventually the cable will break again.
As for the volumen buttons, I have not heard about problems with them as they are are much better supported and there is no movement, cable stress or anything in that part of the phone. If you are having problems with them, maybe it's just dust or something else that got into your phone?
I'm still using widgets and trackball wake (I'm in CM7, so...), just to extend the useful life of the button as much as possible.
elio said:
I've been "living" without a power button for more than 4 months now, using a combination of "no lock" and "lock 2.0" to turn the device on and off.
As for the reboot issue, i always have a usb cable at hand and a small portable usb/dc charger when there's no laptop around.
PS I'm on stock.
Click to expand...
Click to collapse
Yeah, I've got trackball wake and lock widgets and stuff. But I can't be carrying around a usb cable and charger all the time. Lol. I have a set in my car though.
OJ in Compton said:
Can someone explain what the method is to reinforce the power button (with pictures if possible)?
Also, does this apply to the volume buttons too? On one of my refurbs, the top volume button got unresponsive and was probably dying the same way these power buttons do.
EDIT: didn't see you post before I did. I wonder if it's possible to secure the power button and volume button boards in a way that prevents stress on the cables.
Click to expand...
Click to collapse
Your ribbons in the flex cable are probably fraying. That's what happened with mine. It slowly became more and more unresponsive until one point it just chucked out.
ToxicDude said:
You certainly can live without the power button (I did for over two months) but it is a pain every time you have to power it off/on. The problem became too bothersome for me when needing to fly and when needing to swap sim cards, and not always having a pc at hand.
In any case, the replacement process does need for the entire phone to be disassembled, but the guide at ifixit was detailed enough for me. I did try to solder or otherwise fix the cable before replacing it, but it was impossible (very small, short, flexible and, in my case, it was completely severed). To see the cable you don't need to dismantle the whole phone, just the battery cover and the screws behind it.
After changing the board, I used some cable coating to make sure the button sat firmly and that cable was under as little stress as possible. Lets hope this time it lasts more than 8 months.
Click to expand...
Click to collapse
Hmm. Very interesting. I'm not keen on opening up the entire unit to fix the flex cable though. And I was at the repair shop when the guy told me the process, and I pulled back. I would go crazy if there was dust UNDER the screen. Hence why I would like to try soldering the cables first. Any idea on how to go about with that?
chowlala said:
Only concern now then would be, how to power up the phone when I'm not near a cable. Anyone got any ideas?
Click to expand...
Click to collapse
One of those USB battery pack will do.
e.g. Sanyo Eneloop Mobile Booster
How to Manage a Nexus One with a broken Power Button
Here's how I manage my Nexus One to "PREVENT" the power button failure.
http://www.androidguys.com/2010/09/08/manage-nexus-broken-power-button/
colins said:
One of those USB battery pack will do.
e.g. Sanyo Eneloop Mobile Booster
Click to expand...
Click to collapse
Yeah, but like I said, would be difficult to carry around. I hate having stuff in my pockets. If only like some sdcard-eject-reinsert or SIM card thing could work. That would be perfect. But of course I'm probably asking for too much already. Haha.
zekers said:
Here's how I manage my Nexus One to "PREVENT" the power button failure.
http://www.androidguys.com/2010/09/08/manage-nexus-broken-power-button/
Click to expand...
Click to collapse
Yeah, that's a really good write up. I read that the instant my power button broke and has helped me reorientate real quick. I highly recommend the article to those who are facing the same problem.
I actually just sent my nexus one in for repair (I'm in Singapore, just bring the phone to the center). I complained about my phone was just a few days out of warranty (3 days) though I had no receipt with me. They waived the shipping fee (S$53.50 since it's an import phone). Got the phone back a week later with a quote of S$41.50 (not bad at all). The only down size is that the technician somehow didn't plug the cable in all the way. Now I have random flash light when booting up the phone and when picking up the call. Might have to open it up to secure the connection or to send it in for repair again (I have 3 moths of warranty for this part anyhow)
Hope it can help. I had the button failure as well. At the time I send the phone in, MIUI was installed and I did not get any complain about that.
popophobia said:
I actually just sent my nexus one in for repair (I'm in Singapore, just bring the phone to the center). I complained about my phone was just a few days out of warranty (3 days) though I had no receipt with me. They waived the shipping fee (S$53.50 since it's an import phone). Got the phone back a week later with a quote of S$41.50 (not bad at all). The only down size is that the technician somehow didn't plug the cable in all the way. Now I have random flash light when booting up the phone and when picking up the call. Might have to open it up to secure the connection or to send it in for repair again (I have 3 moths of warranty for this part anyhow)
Hope it can help. I had the button failure as well. At the time I send the phone in, MIUI was installed and I did not get any complain about that.
Click to expand...
Click to collapse
I would send it in if I was in Singapore. Not sure how they'd deal with someone from Malaysia though. Repairs + travel/postage would cost quite a bomb. Though I've seen the board part costing about 30 euros. And I would be quite mad if I was returned a phone that has a random flash of light. Lol.
I thought hardware warranty and software warranty were two different issues? Besides, it's a well documented fact that the Nexus One and Desire suffer the same problem... no?
Maybe I can call in and report the phone as a Desire for repairs. LOL.

Volume Down Button Stuck - Volume Rocker Issue

Well, my vol down button is totally stuck now. It's rock solid. Volume up is fine. I can't do anything to get it to work again.
And I am past the 15-day warranty, so I can't RMA.
Is my only option taking it apart myself and attempting to fix it? Ugh. This is horrible. The phone is in pristine condition and has never been dropped. I have been using the bumper pretty much since I got it.
Rikusaki said:
Well, my vol down button is totally stuck now. It's rock solid. Volume up is fine. I can't do anything to get it to work again.
And I am past the 15-day warranty, so I can't RMA.
Is my only option taking it apart myself and attempting to fix it? Ugh. This is horrible. The phone is in pristine condition and has never been dropped. I have been using the bumper pretty much since I got it.
Click to expand...
Click to collapse
Send it in for repair under warranty.
I've had the same problem with mine from time to time. If you feel comfortable doing it, lightly slapping the palm of your hand with the phone might free it up. Otherwise, I'd totally try for a warranty repair if I were you.
I called Google Device support (855-836-3987), explained the issue, and they are sending me a new device. The service was fast and easy. Google rocks. :good:

Frozen screen w/ horizontal green lines

My phone suddenly froze and started displaying horizontal green lines. They range from darker at top to lighter at the bottom. There isn't anything recognizable behind them, but swiping from the top does show motion as if the notification shade was moving.
No drops or sudden impacts
"OK Google" still responds with the confirmation tone that it is listening, but doesn't seem to respond to any further commands.
It can receive calls, sound quality is fine.
Doesn't seem to reboot from holding the power button
I don't have an authorized device to connect via ADB. It did recognize it at first, but didn't accept commands, but now it doesn't show up when listing ADB devices.
I recently had it repaired by Huawei to replace the battery, and i still have extended warranty coverage on it. Really hoping to avoid shipping it back though. Any ideas?
The photo is from my laptop webcam. Really crappy quality but its the best I can get at the moment.
I have the same problem although my screen has a tiny crack but it looks like it wouldn't effect it. Have you sent it in? If so what was their solution?
I eventually sent it in. I had the battery replaced a month before (yay for credit card extended warranty) so this was free due to the 90 warranty after the first repair. I suspect they just replaced the screen. So now I have a new battery and new screen free of charge. ?
No idea what they would charge out of pocket.
maghig said:
I eventually sent it in. I had the battery replaced a month before (yay for credit card extended warranty) so this was free due to the 90 warranty after the first repair. I suspect they just replaced the screen. So now I have a new battery and new screen free of charge.
No idea what they would charge out of pocket.
Click to expand...
Click to collapse
@maghig - i tried to do the credit card extended warranty on my nexus 6P battery - they refused to pay for it as they claimed it wasn't covered under the initial warranty. I couldn't find proof that it would of been covered under initial warranty. Did you need to prove that the initial battery issue was covered under the initial phone warranty? If so, what was the proof? For context - I had battery issues and just paid to have it repaired thinking CC extended warranty would cover (~$160) and then after the repair warranty expired my screen got the solid lines. Huawei wanted to charge me another $160.. so here I am looking at two solid lines on my screen...
I didn't have to give any proof that it would have been covered. They honored it without issue. Did you have it done by huawei or a third party? That might be the difference.
I gave up on it though. After getting it back for the screen replacement it lasted about a month before the lines came back. Not solid as before, but intermittently. Did the project fi trade in to get what I could out of it while it was still worth something.
Thanks for the response. I had it done by Huawei itself - but looks like my cc extended warranty is worthless and Huawei support sucks. I was hoping the to get a new battery and have my 6P last all the way to Pixel 3...I guess I do have a new battery but a crappy display...

How to totally kill my S7 edge?

Hi team. My S7 edge has been rooted plenty of times, tons of custom roms, etc etc. I have owned the phone for 23 months now. The battery is dying, home button peeled, usb dropping connection, and I just found warranty card stating that is still one month under warranty. But due to rooting havoc I inflicted to my phone, knox is deeply tripped. I am trying to find a way to break my phone so badly that it is not even possible to go to download mode so that the service centre cannot check knox status.
Any ideas? Removing cable while flashing bootloader? Undercharging the battery to kill it? Did anyone try?
extract sboot.bin from firmware and flash it with odin very quickly, when it is in middle or between flashing remove the cable immediately and hopefully your phone will die repeat this again and again also try with cm.bin too. You have to hard brick your phone don't try to damage battery or break anything physically it will void your warranty straight away.
PS: I think knox will show tripped if they did't replaced the motherboard and used another method to flash it and you have to blame them that they did it not you.:victory::victory:
It seems to be difficult to hard brick the phone. I tried many times - in Odin, I selected BL button, selected the BL archive from stock firmware, then during flashing I was disconnecting the phone. I tried it several times at several stages of flashing (once i hit the sboot.bin) but the download mode still works and displays warranty void 1. I can't kill off that download mode. I am starting to worry that it is hardcoded into some ROM module that just cannot be written and so it is running from hardware. This factory flashing through odin is doing everything with NAND memory that is read-writable but it looks that the download mode "partition" is not writable at all. Despite I break bootloader or whatever else, i just cannot destroy download mode, hence it is impossible to hard brick the phone. I was thinking of overclocking the CPU to destroy it but i think it would be too obvious.
If you are based in the EU, then Samsung needs to repair under warranty regardless whether you have rooted your phone or not.
Darkjamzi said:
If you are based in the EU, then Samsung needs to repair under warranty regardless whether you have rooted your phone or not.
Click to expand...
Click to collapse
Well, I am based in EU. Can you support your statement by any source?
Anyway I flashed stock rom and brought it to the carrier's store for repair. Let's see.
wratnik said:
Well, I am based in EU. Can you support your statement by any source?
Anyway I flashed stock rom and brought it to the carrier's store for repair. Let's see.
Click to expand...
Click to collapse
Well, it is the law...... a vendor can't just invalidate your statutory warranty, because they don't like what you did........
https://www.piana.eu/root/
https://forum.xda-developers.com/showthread.php?t=1998801
https://www.xda-developers.com/xda-external-link/rooting-cannot-legally-void-your-warranty/
If they refuse (which they probably will) take them to court. Just to be clear, you need to take whoever supplied the phone to court, as you'll have warranty with them.
wratnik said:
Hi team. My S7 edge has been rooted plenty of times, tons of custom roms, etc etc. I have owned the phone for 23 months now. The battery is dying, home button peeled, usb dropping connection, and I just found warranty card stating that is still one month under warranty. But due to rooting havoc I inflicted to my phone, knox is deeply tripped. I am trying to find a way to break my phone so badly that it is not even possible to go to download mode so that the service centre cannot check knox status.
Any ideas? Removing cable while flashing bootloader? Undercharging the battery to kill it? Did anyone try?
Click to expand...
Click to collapse
Use a USB killer. Simple.
how about give it to somebody who really could use a phone?
Put 12v ping from old pc psu on usb 5v and +data (red and green wire in cable) rail ,it will kill it,work with my old LG G4 whenn LG wont replace via rma screen with red retentions,fry it on 12v for few miliseconds do not for longer time or will be start smoking
Hello all, just an update,
they totally repaired my phone, no questions asked. Replaced the battery, entire front panel with screen, home button, and they even replaced the chassis (metal frame) so it looks like new. A pity that the back cover remained old, scratched.
Samsung rulez.
wratnik said:
Hello all, just an update,
they totally repaired my phone, no questions asked. Replaced the battery, entire front panel with screen, home button, and they even replaced the chassis (metal frame) so it looks like new. A pity that the back cover remained old, scratched.
Samsung rulez.
Click to expand...
Click to collapse
Just wondering if it's still waterproof
Aashish.007 said:
Use a USB killer. Simple.
Click to expand...
Click to collapse
At most, all he will accomplish with an USB Killer stick is to fry the contacts on the USB port if it's not securely plugged in. The S7 is immune to the USB killer stick.
Seicer said:
Just wondering if it's still waterproof
Click to expand...
Click to collapse
I confirm it's waterproof as before. Since repair, I had it with me several times in wellness tub, sauna, jacuzzi (warm water - more risk to "loosen" the adhesive), also took some slo-mo videos during water sliding and there is no sign of water / drops / mist in the phone. I am taking it to the sea in 3 weeks (for the 3rd summer in a row). The phone is holding together like new. It also suffered a few drops - no damage.
Just a note - USB charging is not working several hours after bath. It must dry completely. So bring a wireless charger if you plan to bathe with your s7 edge.
The best phone in my life. It's so durable. Although.. note 8 would be a nice upgrade
I have been using my phone for 2 years last month I thought will replace battery, in local Samsung shop battery replacement cost £60 together with the battery but I thought I will try it myself. Bought battery for £20
Few tools to open the phone, hair dryer. Tube of silicone, double sided tape.
Local shops are filled up with spare parts for s7 edge back plate motherboards etc and they're cheap in case if I damaged anything.
It took me around 2 hours to replace the battery and haven't damaged anything, was thinking will test if my phone is still waterproof. Well Samsung says originally I can put my phone underwater 0.5m deep for 30 min and it should still work.
I did extended water resistance test. Used fishing rod and there's lake just behind my house. Attached my phone and dropped it I think around 4m deep and went back home and came back in the evening around 8 hours later thinking either fish ate my phone or surely it died, pulled it back and there were few messages on the screen, someone texted me while my phone was on the bottom of the lake.
I guess I have waterproofed my phone better than Samsung
wratnik said:
Hello all, just an update,
they totally repaired my phone, no questions asked. Replaced the battery, entire front panel with screen, home button, and they even replaced the chassis (metal frame) so it looks like new. A pity that the back cover remained old, scratched.
Samsung rulez.
Click to expand...
Click to collapse
The back glass is extremely easy to repair though, I'd know since i've replaced it myself on my S7E about 5 times now. Usually a new OEM glass battery cover replacement only costs about 20 bucks.
S7 edge
Hello I'm in the same situation and i am based in the eu to do i still have to hard brick the device or just send it to samsung thanks in advance
Thijs
no need to hard brick, just send it as is.
wratnik said:
no need to hard brick, just send it as is.
Click to expand...
Click to collapse
Thanks for replying so fast, I'll post an update about the "possible" repair of my device!
Hello, did they change your motherboard and knox is 0 now or you received it with same motherboard with knox 1 ?
Microwave? Cook some chips..

Categories

Resources