Hi,
Omnia 7 had been working fine up until now, steps leading up to the event:
* Debranded registry using chevron tool to install a regedit app.
* received pre nodo update and installed
* Used vpn workaround to install nodo update
* Phone worked fine for a month then when the 'walsh tool' was released I ran that. Went through OK and phone was still useable.
* A few hours later I was browsing the market place and phone rebooted itself and was stuck at the Omnia7 logo. Started phone in USB mode and connected to Zune to restore - got to 34% and errored saying "phone not responding".
* Power cycled again into usb mode and connected to PC but now the device is not recognised at all in Windows (nothing showing in device manager)
* restore mode is disabled but I have ordered a 'jig' tool.
My concern is that if USB mode is no longer picked up in Windows, that restore mode won't be picked up either. I should have the 'jig' in the next day or so.
I had the same problem about a week after I got my Omnia 7 in October last year.
Obviously I hadn’t used any tools for debranding or anything then, It seems like a fault with the phone to begin with, not due to anything you done.
I rang Orange and they sent me a brand new phone the next day. So try ringing your provider.
I tried connecting the phone again tonight and zune picks it up, gets to 99% complete on restore then stops. Seems the USB is being detected again - I did have the battery out of it overnight.
I have the same exact problem but without any jailbreaking
please I you find any solution just tell me
beacuse I don't have warranty I bought it via Ebay
Using the "jig" tool, I was able to enter download mode and reflash the device. I now have a "Welcome to your Samsung Omnia7" screen.
So I can confirm this method works.
Hi
In the Microsoft answer forum someone wrote that the problem was form the battery. So, I will go first with this one.
Regarding the download mode I have problem as well. When I hold pressing the volume up, camera and the power button it display the USB connection logo same as the one in the update. I don't know why!!!
Abd654 said:
Hi
In the Microsoft answer forum someone wrote that the problem was form the battery. So, I will go first with this one.
Regarding the download mode I have problem as well. When I hold pressing the volume up, camera and the power button it display the USB connection logo same as the one in the update. I don't know why!!!
Click to expand...
Click to collapse
That is because your bootloader does not support the Download Mode and enters the Zune Recovery Mode instead.
Hi! try with this
http://windowsteamblog.com/windows_...spx?utm_source=twitterfeed&utm_medium=twitter
Did you try Hard reset?
1. Press and hold down the Power button + Volume down button + Camera button all at the same time until the device vibrates, then let go of the Power button while continuing to hold down the Volume down button and the Camera button.
2. Shortly you should see the message displaying "Are you sure you want to format?", you can now release the Volume down button + Camera button.
I just formated and same problem appear again and again
I don't what to do
please help
in addition to that I don't have the download mode
You will have to get the jig tool to enter download mode to reflash, or send away for repair.
My phone is still playing up, random crashes then stuck at Omia logo. To get it started again I have to reinsert the battery and even then sometimes it gets stuck at the Windows Phone logo. I will try one more flash and if I still have problems I will be raising a warranty claim.
This happened to my phone this morning. Tried to open Beezz, but it wouldn't start (went right back to home screen).
I obviously tried a reboot, but it got stuck at the Samsung Omnia 7 -screen.
So far I have:
(no difference between the steps)
Installed the samsung update patch\fix
Hard reset
Reflash via download mode to KB2
Hard reset
Reflash via download mode to JK1
No success so far. At the moment I'm letting it stay turned on, and every minute or so it flashes black, but returns to the logo screen.
Any help would be appreciated :d
Mine seems to work for a day or so after a reflash, then starts playing up again. Sometimes stuck at logo until I take the battery out and then put back in. I had a problem opening the messaging app, would get the tile animation then back to homescreen. I have arranged to have my Omnia sent back under warranty so will see what they find.
After a power surge, my Omnia hanged then when I rebooted, its now stuck at that Logo Screen. Did everything possible (hard reset, flash rom, go into recovery mode which gets stuck after zune reboots the phone....)
Used the windows support tool and I get this message: The phone is not in the 'Connect to PC' state. Please, make sure that you follow the instructions and your phone shows the 'Connect To PC' image
Any help would be greatly appreciated
Sounds like you have tried everything I would have already. I would send it for repair / warranty.
Turns out my phone WAS faulty and it has been replaced - should receive replacememnt today (Has taken over a month)
My phone was working okish before but it kept frezzing or i would click on contacts and then it would just go back to the home screen, so i pluged it in to the laptop and followed this http://forum.xda-developers.com/show...hing+with+odin
Now i can get my phone into download mode and connect it to the laptop, i click start on Odin and then get a yellow box in first box and it also says dont turn off target but the screen on the phone goes black? if i discount the phone it come up on odin that its failed so i reconnect but still the phone screen goes blank???
And now i get is a phone picture and pc screen which i belive means its soft blocked?
I can still get to downlaod mode
Brian
Yes soft bricked. Just flash another firmware.. stock is best bet, and then move on from there.
BTW link doesn't work
Long story short my wife damaged her phone and while waiting to get a new one she used my vibrant after I flashed it back to stock however I did have GB bootloaders flashed before I flashed to stock so I am not sure if that was still resident on the phone or not? And I did root it again before I gave it to her. She got the notification that there was an update from T-Mobile and installed it and then she said the screen went black and now it won't turn on at all. Is it bricked at this point?
Did she use the Kies program to do the update??
If so so there is a very strong possibility that it is hard bricked, because Kies is notorious for corrupting the Primary and SBL [boot loaders] The primary actually powers on the phone, and the secondary boot loader initiates the boot sequencing!
So in short once the Primary is corrupted it will never power on until the phone is J-Tagged by a specialist. Which he overwrites a fresh new primary to get it to power on! But again you need to post all the symptoms and the sequence of events she did to hose your phone.
All I know is that she got the notification from T-Mobile say there was a software update for the phone and she said that she said ok and then the phone rebooted and went to a white progress screen and once it finished the phone went black and now it won't turn on at all...
I am assuming that the T-mobile update is applied via Kies? If that is the case and that white screen that my wife saw was the Kies update then I am also assuming my phone is bricked? I have it plugged in right now and computer doesn't recognize it and there are no lights or anything coming on on the phone at all...
No kies is a program that is downloaded from Samsung to your pc. Have Odin ready. Then pull your battery sim card out. Put battery in hold down both volume rockers and then plug USB cord into phone. If Odin recognizes it your good.
No luck. ODIN doesn't recognize the phone. Called T-mobile and they are doing an exchange and sending me the HTC Sensation next day air for free... Guess it could be worse.. The wife just got the Galaxy S II so maybe I can trade her...
Hi,
unfortunately I have a problem with my Galaxy S5 running CM.
Some days ago, the power button got stuck in the case so that it was pressed for quite a long time. When I tried to turn the phone back on it only showed the logo for a while, vibrated and rebooted.
I tried to boot the phone in safe mode which didn't help and then in 'transfer mode' (sorry, I don't know the right term. I think it's the mode where I transfer a custom ROM). The latter without connecting to a computer so it said something like 'transfering, don't turn off' for a while. Eventually, I had to turn off the phone cause nothing happened.
Now, when I try to boot the phone it just vibrates and stays black. Not even a LED flashes. When I connect it to my PC it vibrates and the PC recognizes something but doesn't show any connected hardware. It just installs a driver.
People at a repair store said the screen is dead but I don't really believe it because there was no physical damage of any sort.
Is there a way to repair my phone?
If you turned it off mid flash you have no ROM. There's nothing to boot. Use volume up, power and home while booting. Load recovery. Flash the ROM and don't stop it. If it doesn't work get a different ROM and try again
My phone started behaving very strangely, turning on/off randomly and freezing for long periods. I used twrp to wipe my phone in a desperate attempt to get it working again, but unfortunately it only made my device worse. I tried to flash stock firmware since it started acting up but the device isn't able to connect to my computer as I had usb debugging switched off, the phone is in such a state where I can't get past my sim pin screen as it freezes then turns itself off each time. I wish I had thought really cannot afford another phone just now so I would like to know if it is salvageable or if it's a complete write off.
Moto G4 Athene