So after i replaced the display on my Pure the phone doesn't start. When i plug the charger led is blinking. I let it charge for night but that didn't help. Does anyone knows what may be the problem?
P.s. The display is working correctly because i can enter fastboot when charger is plugged, but i can't do anything from there, not even enter recovery.
Related
I cant turn on my device, the only thing that seems to work is the led, when I turn it on starts on green then orange and finalley red, Does anyone know what happened?
Does it work at all when plugged in to the mains power? Does teh charge led light up to display what is going on? Do you have another device/a multimeter that you can check the battery with. it could be that the battery has died / needs a long charge / doesn't want to work. Hopefully that is what it is, as if not, it could be something a lot more severe.
Stu
I have a Mytouch 4g (I got it in this condition from somebody else, so i dont know the history).. phone seems be in mint condition and from what i can tell it never got disassembled.
Phone seems to be completely dead, when i power on, nothing comes up, no boot splash etc.. but something odd happened when i plug it in to my computer.. it started blinking orange light and i noticed that my computer detected a USB mass storage device and such. still the phone wont boot for any combination of buttons. the orange blinking light stops few seconds after i remove the cable. Battery seems to have gotten charged by this phone. My computer shows a new "removable drive".. but my SD card that i put in it cannot be accessed.
anything i can try? any ideas? i do see that when its plugged in, if i hold power button down, it will stop blinking and then starts blinking again.
cganesh75 said:
I have a Mytouch 4g (I got it in this condition from somebody else, so i dont know the history).. phone seems be in mint condition and from what i can tell it never got disassembled.
Phone seems to be completely dead, when i power on, nothing comes up, no boot splash etc.. but something odd happened when i plug it in to my computer.. it started blinking orange light and i noticed that my computer detected a USB mass storage device and such. still the phone wont boot for any combination of buttons. the orange blinking light stops few seconds after i remove the cable. Battery seems to have gotten charged by this phone. My computer shows a new "removable drive".. but my SD card that i put in it cannot be accessed.
anything i can try? any ideas? i do see that when its plugged in, if i hold power button down, it will stop blinking and then starts blinking again.
Click to expand...
Click to collapse
You're battery is completely drained. If you have an HTC charger plug it in and let it sit. After awhile the blinking orange light will turn in to a steady orange light to indicate that it is charging. It has nothing to do with bricking, you just have a dead battery
bas3balman said:
You're battery is completely drained. If you have an HTC charger plug it in and let it sit. After awhile the blinking orange light will turn in to a steady orange light to indicate that it is charging. It has nothing to do with bricking, you just have a dead battery
Click to expand...
Click to collapse
negative on that. i put a fully charged battery from my other MT4G into this one. when its not plugged in, i dont get any blinking light. when i have it plugged in, its constantly blinking.
also, everytime i connect it the computer, it does detect the USB . i get the connection sound through the PC speaker
I have Pdanet installed.. I tried with my other mt4g, powered it off, connected to the computer.. USB is detected and the PDANet detects the phone being attached (even though the phone is off), orange light stays solid
when i connect the MT4G (bricked).. USB gets detected, Pdanet never detects a phone being attached.. orange light keeps blinking
is it possible that the phone is not detecting the battery? or the battery status?
From what I've read, a bricked phone and the known battery issue seem to have very similar symptoms.
Long story short: I was running a benchmark and the phone turned off and would not turn back on, and there was no red charging indicator. I let it charge overnight and now I have a blinking red charging indicator and I can get into Bootloader and Recovery while plugged in to the stock charger (5V 1.2 amp), but not when plugged into the computer (5V 500mA). I tried restoring AND full wipe/ fresh install and it still won't boot. When plugged into the computer I can get to the bootloader for about half a second and it will turn off. Also I can get into "download mode" on either connection, and I did not have "USB Debugging" enabled when it first turned off. What is download mode and how do I use it?
What do you guys think?
dailydR1ver said:
Long story short: I was running a benchmark and the phone turned off and would not turn back on, and there was no red charging indicator. I let it charge overnight and now I have a blinking red charging indicator and I can get into Bootloader and Recovery while plugged in to the stock charger (5V 1.2 amp), but not when plugged into the computer (5V 500mA). I tried restoring AND full wipe/ fresh install and it still won't boot. When plugged into the computer I can get to the bootloader for about half a second and it will turn off. Also I can get into "download mode" on either connection, and I did not have "USB Debugging" enabled when it first turned off.
What do you guys think?
Click to expand...
Click to collapse
flash the factory img via fastboot.
I have the similar issue, I can't charge the battery, while charging there's about 3mins RED LED last(not flash), hold the three buttons, but just a black screen, no bootloader no download mode.
sato84 said:
I have the similar issue, I can't charge the battery, while charging there's about 3mins RED LED last(not flash), hold the three buttons, but just a black screen, no bootloader no download mode.
Click to expand...
Click to collapse
bootloader is power button + volume down
How? I can't get to fastboot while its hooked up to the computer. It will only go into the bootloader when its hooked to the stock charger.
Sent from my Nexus 7 using Tapatalk 2
I was replacing a screen on my friends lg g2 and when i put it back tgheter it didnt boot up, when i plug it in to charge a red light starts blinking.I tore it down again checked if everything was connected properly and then plug it int again but it i still get the red flashing light.Im confident that i didnt damage any components while taking it apart.Does anyone know what this is and how to fix it?
looks like he battery was just so emty it wouldnt even boot when plugged in
thepilot234 said:
I was replacing a screen on my friends lg g2 and when i put it back tgheter it didnt boot up, when i plug it in to charge a red light starts blinking.I tore it down again checked if everything was connected properly and then plug it int again but it i still get the red flashing light.Im confident that i didnt damage any components while taking it apart.Does anyone know what this is and how to fix it?
Click to expand...
Click to collapse
If you are sure you install it right, and you can see the screen and access to the system , you nedd to know that there is an option on every stock rom that when you connect a charger the red led appear.
Go to settings, screen , led , and uncheck the "led when charging"
Otherwise, could be an hardware problem. But if that appears only when it´s charging, I think that this is what happens
My Axon was at the twrp menu at 1% this morning so i went to shut it down to charge it but i havent been able to get it back on since. At first, plugging in the charger would prompt a light vibrate and red LED every few seconds but this has slowly stopped and the red LED only flashes every so often when i hold the power button. I've been trying to get into EDL Mode but with no indication from the phone, along with no indication of connection from the computer, I've been unsuccessful. If anyone could offer me some help to even get into EDL mode so i can flash out of this, that would be great. Thanks
Maybe forcing the EDL mode, using a moded USB cable:
https://forum.xda-developers.com/showthread.php?t=3537990
Search for the cable and instructions on that link
It seems like it's trying to boot into EDL mode but the battery isn't taking a charge. Have you tried connecting the phone to the wall charger for like an hour and then connect it to the PC?