hi
i'm having some issue with my head unit that i can't solve by myself
1)usb debugging code, can't find it online
2)usb port can't see the tpms reciever, work's great with S7edge, what can be the problem?
thank's for your help!!!
Related
Hello,
Does anyone have a good solution how to make Bluetooth LED strips (example the Govee LED strip) work with the Dasaita PX6 Android 10 Head Unit (or any other comparable HU).
Bluetooth works with my phone and my OBD2 device, but the head unit does not find the LED strips.
I'm really trying to find a solution here - so please reply if you have a solution. I am also wondering if head unit developers read the issues we post here and try to fix them?
Thanks!
Hey everyone,
I was wondering if anyone was successful with setting up an external bluetooth dongle for the Dasaita PX6 MAX10 (the hardware seems to be the same with VIVID10, MAX11, VIVID11).
My Bluetooth built-in hardware seems to be WQ_RF210 but it's limited and can connect to only phones and OBD devices, as far as I tested.
I would like to extend the BT capabilities to operate LED strips and other non-phone devices.
Anyone tried something and could share experiences?
Thanks!
The solution is to buy a UIS7862 FYT type unit as discussed in the FYT forum.
MTCD platform devices bluetooth is severely cropped and cannot be fixed.
Hello,
I bought a ES2652 (10.25" Display) for my Mercedes W207 from Erisin. Unfortunately I get so sound. The wires are connected correct and the Mercedes Setting is on AUX.
So the problem must be the head unit. I think I have to change the Audiooutput setting.
The problem is I cant access the factory settings. I have no code.
Erisin dont reply to my E-mails. I tried some codes i found online but i had no success.
Any suggestions?
I have just bought a Junsun V1 Pro Android Radio for my Renault Megane 3.
After installing the unit it does not start. But when I then pull the plug on the canbus out a little, a screen image comes on. Hope you can help me. Thanks
Did you manage to fix the issue? Otherwise the pic you posted would indicate that the unit thinks the car is shifted in Reverse.
Thanks for your reply.
And no didn't really solve the problem. How do I solve the problem if it thinks I'm in reverse gear?
If I cut one of the wires on the canbus, it wants to run but can't be turned off again.
Have you checked that your canbus settings are correct? Maybe try a different vehicle. Is your car equipt with parking sensors or a camera?. I had a similar issue with my unit (altough in a peugeot), where the headunit was set from factory to be ready for a backcam and sensors, which my car doesn't have.
Thanks for your reply. It has been a bit difficult to change the canbus settings when I couldn't get the start screen on at all. After I have cut a wire on the canbus, I can get the start screen on and have to try different settings.
And I have written to Junsun with the problem. Thought it might be a wrong cunbus/Cable.
And they write back that it's the right thing and I should try not to be in reverse gear, but I'm not in reverse gear??
hi all! I bought a BMW x6 head unit based on android. The description says that 825x_pro 4/64.
I have a problem with connecting the USB DAC Fiio K3, the head unit detects it as headphones, but the sound does not play, but it transmits sound through the UAPP application. The system and other applications do not give any sound. I certainly apologize, I have been looking for a solution for a week now. I am attaching a photo of the head unit. maybe I'm doing something wrong. thank you in advance!
Check Usb Audio Routing in the developer settings. Maybe it's deactivated there.
No is activated
Did you figure this out? Having the same issue.
Hello everyone. It is a BMW X5 E70 2008, ccc. I bought HU on Aliexpress (the version is in the picture). After installation, the OEM BMW menu does not work (no signal), the usb does not show and the electronic steering wheel adjustment does not work. All cables well connected, checked several times. Can someone help me enable these functions? Thanks in advance
Hi , did you get CANBUS box with this unit?
Canbus is used to connect multimedia device with car functions and car ECU.
If you have one installed probably wrong settings are set for car. You can change it in factory settings menu (hidden menu with PIN code access).
And consult with your seller about bought head unit rather than writing problems here on forum.
As for system update, you can ask seller for update or find on this forum or net, by search term "ZLH_BMH" - that's your version of software for unit.
Hello and thanks for your reply. I have the canbus and it is connected properly. Checked several times by an auto electrician. Everything works as it should except the oem bmw menu. In the factory settings you're talking about, I tried all the options, but it's always the same - no signal. I think it's definitely a software problem and I can't find an update here or anywhere. And the seller is completely useless
serbia4ever said:
Hello and thanks for your reply. I have the canbus and it is connected properly. Checked several times by an auto electrician. Everything works as it should except the oem bmw menu. In the factory settings you're talking about, I tried all the options, but it's always the same - no signal. I think it's definitely a software problem and I can't find an update here or anywhere. And the seller is completely useless
Click to expand...
Click to collapse
I would try to change canbus box with other one, another model like HIworld or Simplesoft, obviously there is no communication between ecu of car and head unit or cables behind unit for keys / steering wheel are misconnected or misswired. Check for wiring diagram for this device, find it one net somewhere.