Hello everyone. It is a BMW X5 E70 2008, ccc. I bought HU on Aliexpress (the version is in the picture). After installation, the OEM BMW menu does not work (no signal), the usb does not show and the electronic steering wheel adjustment does not work. All cables well connected, checked several times. Can someone help me enable these functions? Thanks in advance
Hi , did you get CANBUS box with this unit?
Canbus is used to connect multimedia device with car functions and car ECU.
If you have one installed probably wrong settings are set for car. You can change it in factory settings menu (hidden menu with PIN code access).
And consult with your seller about bought head unit rather than writing problems here on forum.
As for system update, you can ask seller for update or find on this forum or net, by search term "ZLH_BMH" - that's your version of software for unit.
Hello and thanks for your reply. I have the canbus and it is connected properly. Checked several times by an auto electrician. Everything works as it should except the oem bmw menu. In the factory settings you're talking about, I tried all the options, but it's always the same - no signal. I think it's definitely a software problem and I can't find an update here or anywhere. And the seller is completely useless
serbia4ever said:
Hello and thanks for your reply. I have the canbus and it is connected properly. Checked several times by an auto electrician. Everything works as it should except the oem bmw menu. In the factory settings you're talking about, I tried all the options, but it's always the same - no signal. I think it's definitely a software problem and I can't find an update here or anywhere. And the seller is completely useless
Click to expand...
Click to collapse
I would try to change canbus box with other one, another model like HIworld or Simplesoft, obviously there is no communication between ecu of car and head unit or cables behind unit for keys / steering wheel are misconnected or misswired. Check for wiring diagram for this device, find it one net somewhere.
Related
Hello, I'm writing here with a hope that somebody can diagnose the problem I have.
Recently I bought a android head unit radio that is based on joying os (it looks the same actually). I have a canbus box and I think everything is connected properly, however the swc control is not working. I checked all the canbus decoder protocols that are for my car brand in factory settings.
I managed to find an option "print protocol" which shows a can signals that gets through to radio. I can't post videos but it prints all the buttons presses and releases in hex format, but the headunit is not responding to them. Does this mean that canbus decoder is faulty? Or this mean that I'm missing something software wise?
I ask this question because I still have a dispute time on aliexpress and if this is hardware issue I might be able go get canbus box replacement.
Thanks in advance.
Hey guys,
I recently bought a Headunit for my Opel/Vauxhall/GM Vectra C by the brand Autotop on AliExpress.
More information here : https://www.aliexpress.com/item/33064243426.html?spm=a2g0s.9042311.0.0.4d374c4djb2lMm
It is a RK3368 unit with 4gb RAM and 64gb ROM and Carplay function. I mainly bought this unit because I expected two main features from it.
Firstly I wanted to be able to have plug and play Android Auto and the unit came with a dedicated usb cable that had the label carplay on it which only fit in one slot on the back of the radio. Sadly when I plugged my phone in nothing happened so I assume that the unit is in fact not Android Auto ready even though the description says so. Am I doing something wrong/ Do I have to set up Android Auto in some way, first?
I also want to install a backup camera and I saw in some other youtube videos that the PX5 Android 9 and Android 10 devices have something called "Extra Settings" where different parameters of the backup camera can be adjusted. One of the things that can be adjusted is the calculation of the reverse trajectory of the car which is a feature that I would really like to have.
Unfortunately my headunit only has "General Settings" "Factory Settings" and "Steering Wheel" settings. And none of these settings contain any adjustments for the backup camera.
Is there a way to "unlock" these extra settings or are they just not present in my Android Build ?
Ive attached my Build Number for further information down below
Thanks in advance for your help!
Yesterday i also got my PX5 4GB/64GB for my Vauxhall Insignia / Buick Regal 2016.
1. I am also missing the "extra settings". There are some options that might solve my other problem with my...
2. Steering wheel Buttons not working. They are working but not in the android Unit, just in my Board Computer
3. The Board Computer doenst seem to communicate with my new Android Radio ...
It was also said Plug and play and in the Describtion they had an image of exactly the same original Radio that i have/had...
I am so dissapointed but i think there is a wrong Setting in the Factory Settings (code 126) - here a Video of my Settings:
and this is waht i see, when i try to programm the steerin wheel buttons (attachement)
I think it comes all togehter on either the missing "Extra Settings" or in a wrong setting in the Factory Settings :-(
I have the same problem with steering wheel buttons. I got a PX5 4GB/64GB Erisin
Carplay dont work at moment, I am thinking to update de firmware...
https://www.aliexpress.com/item/1005001834561873.html
i found out that a cable was not connected to the steering wheel.
I had to open the plastic-frame above the steering wheel and there was a connector.
Now they work but i still can not programm each button to another function. Still grey screen.
I
DaGamma said:
i found out that a cable was not connected to the steering wheel.
I had to open the plastic-frame above the steering wheel and there was a connector.
View attachment 5216727
Now they work but i still can not programm each button to another function. Still grey screen.
Click to expand...
Click to collapse
I can to program each button in Factory settings --- key --- canbus key setting, they work for me
Can you change the language of the car? After installing the language changed to english from the tachometre. In the car app there is no setting to change language.
I dont mean the android language,
Hi,
The unit is THIS
I've got my unit, installed it, changed the info display from a facelift model to match the conections with the following diagram D1 , D2 and D3 .
The only issue is that the climate controls have a mind of their own, they change the setting to a/c auto, a/c eco, etc.
I talked to a guy that told me to change the car model from "machine settings" to solve the climate control, i entered a menu but it has everything in Chinese HERE .
In that menu the selected model is 04-15 mazda 6, in the CanBox category are a lot of i guess "firmwares". Should i take them one at a time?
What can i do to make it work? I also changed the climate control from a facelift model when other guy told me that could be a issue
More photos here and here and here from my install.
Thank you.
vlad_skz said:
Hi,
The unit is THIS
I've got my unit, installed it, changed the info display from a facelift model to match the conections with the following diagram D1 , D2 and D3 .
The only issue is that the climate controls have a mind of their own, they change the setting to a/c auto, a/c eco, etc.
I talked to a guy that told me to change the car model from "machine settings" to solve the climate control, i entered a menu but it has everything in Chinese HERE .
In that menu the selected model is 04-15 mazda 6, in the CanBox category are a lot of i guess "firmwares". Should i take them one at a time?
What can i do to make it work? I also changed the climate control from a facelift model when other guy told me that could be a issue
More photos here and here and here from my install.
Thank you.
Click to expand...
Click to collapse
Yes, you need to install one at time, the HU do an automatic reset and after that you check the functions; if everything it's ok you don't need to do nothing, if not, try other configuration.
By the way, you need to be connected to the wifi or gsm.
Yes, you need to install one at time, the HU do an automatic reset and after that you check the functions; if everything it's ok you don't need to do nothing, if not, try other configuration.
By the way, you need to be connected to the wifi or gsm.
Click to expand...
Click to collapse
I am connected to wifi, i tried anything that was my car model and close to my year, steering wheel buttons work everytime however the A/C commandsare still changing their own.
Hi there. I searched (at least I tried for several hours without luck) this forum and the internet in general.
I have bought a ES8113M from Erisin (https://erisin.de/products/-655) with Android 10 preinstalled and a RN-SS-01 canbus decoder. The issue is that the steering wheel controller is not working. Does anyone have managed to connect the canbus of their Megane to the Android head unit?
Please tell me if you need more info. I am happy for every litte hint on PIN Layouts, factory setting, firmware upgrades or anything else.
Thanks in advance
What did seller suggest when contacted for support?
Is this an FYT based unit?
Thanks @marchnz for your quick reply and thereby help .
Support is poor. I asked two times over two different channels but did not get any answer yet.
Sorry to ask, I am new to Android head units. What do you mean FYT unit? Do you mean the MicroControlerUnit (MCU)-type? Then it's a S32F0 or LEIMA?
It says S32F0_LEIMA-W 20201020-17:05 HD1_7708_D_FF_C8
Oh I see you may ask because I posted to FYT Android head units. If this was wrong sorry and maybe a moderator will provide help and move to the appropriate sub forum (thanks).
@Badger50 thanks for moving this thread to the right forum. I hope someone still reads older (like in days ;-) threads and is able to help and or ask questions for me to better understand and hopefully solve my issue....
neobond said:
@Badger50 thanks for moving this thread to the right forum. I hope someone still reads older (like in days ;-) threads and is able to help and or ask questions for me to better understand and hopefully solve my issue....
Click to expand...
Click to collapse
Is there a possibility to connect the shown connector directly to the radio?
Did you get the right cable tree from the seller? Normally the CAN adapter is connected in between the car-cable tree and the radio.
Is this the right CAN adapter for this radio, provided by the radio seller?
Thank you @rigattoni for your reply. And yes, the Canbus-Decoder ist connected to the Megane on the one side (for power and canbus signal) and the radio (see pinout picture from erisin). I would confirm this as you say it's "normally". I think and hope I have the right harness. At least the QR code says for MEGANE 2 and the website / the seller state it is especially designed and adapted for the Megane 2 (https://erisin.de/products/erisin-e...wifi-4g-dvd-obd-canbus-swc-für-renault-megane).
I did some more digging and analising today. Here are the colors of the ISO-Adapter with the according functions as far as I could find out on the internet (First screenshot). I also compared the cables from the harness and the radio to the canbus adapter (second screenshot). And finally I checked the connections to the radio and the link from there to the canbus adapter again (third screenshot).
It would be nice if someone could confirm some functions and if especially the canbus connections from the harness are the same with your knowledge (at best from another Renault Megane CC2 driver ).
Also I am curious if someone can shre more intel on the canbus cables of a Megane convertible 2.
What if the wiring is fine. I measured 5V between RN-SS-01 PIN3 / PIN4 and GND. To me that makes sense for a canbus information channel... Lots of messages on high...
Can someone provide the correct parameters for the Android head unit? I did a factory reset, an android reset and a SD0 card wipe. Unfortunately the car settings and factory settings remain as I did set them during testing.
For the canbus type (in the factory settings) I think it was 0x00 OFF when I first installed it. I cannot select it from the "select your model" screen (see above, RN-SS-01 missing). But I can set it to 0x85 RENAULT MEGANE SP...
Any intel on what canbus type should work? And how can I test it? In the car settings there is a menu entry steering wheel settings... I did reset it during testing and now even if I press a button on the steering wheel control, nothing happens. I would assume it should pop up a message on which button recognized and ask for what to map it to...
Sorry I am a bloody n00b here....
Sorry for starting this thread, but I would like to finish it with an easy statement: My car hasn't CANBUS (because manufactured >>before 2005<<). So I needed to go with an analogue adapter.
After a very friendly and productive phone call with a German vendor I bought this one here:
https://www.niq.de/lenkradfernbedie...---Scenic---Trafic-Bj--Ab-2000-fuer-auna.html.
From there on very easy to install. Connect the ISO cables from the car to the ISO adapter from NIQ and the departing cables to the ISO connector from the ERISIN head unit. Additionally and to get the steering wheel control working I had to connect SWC1, SWC2 and GND from the NIQ-adapter to the head unit.
Thanks for everyone reading and helping. CASE_SOLVED
Hello, I ordered multimedia for megane 2 ( https://www.aliexpress.com/item/100...020888279!sea!BG!0&curPageLogUid=eazK1RuTtlpe) but the can-bus decoder doesn't work, I ordered another one from another dealer but the coupler is smaller, is it possible to connect the wires to the new one. The new one is labeled "Megane 2" and I got it with cables but they don't fit...
Hi all just fitted a Sinosmart head unit for a Nissan quashqui j10 but the steering wheel buttons will not program any ideas how to fix this ? Purchased from Ali Express. Info supplied not great.
What does seller suggest
what has been tried
what is head unit - post android system head unit including MCU version
Said they are sending ma a new cable but not sure that’s going to work as canbus not recognising
Have you connected to power to the canbus unit. Mine hasa separate power connector. Took me weeks to realise I had not connected it.
Mike Tigerman said:
Hi all just fitted a Sinosmart head unit for a Nissan quashqui j10 but the steering wheel buttons will not program any ideas how to fix this ? Purchased from Ali Express. Info supplied not great.
Click to expand...
Click to collapse
Hii, first check canbus if connected right, then when in Androisd go to car settings / infotainment - info of device and enter factory settings with pin 123456 or 8888, find canbus menu for updating (not system !) and update online (choose your model of your car and year, canbus name must be exact as says at the background of the canbus box - raise, general, hiworld etc.) or offline (via USB DRIVE if seller sent you to import correct files into unit).
When downloaded correct settings for canbus , updated and restarted with correct settings car functions will work.