Ts9 sp9853i_1h10_vmm mazda 6 2003 - Android Head-Units

Hi,
The unit is THIS
I've got my unit, installed it, changed the info display from a facelift model to match the conections with the following diagram D1 , D2 and D3 .
The only issue is that the climate controls have a mind of their own, they change the setting to a/c auto, a/c eco, etc.
I talked to a guy that told me to change the car model from "machine settings" to solve the climate control, i entered a menu but it has everything in Chinese HERE .
In that menu the selected model is 04-15 mazda 6, in the CanBox category are a lot of i guess "firmwares". Should i take them one at a time?
What can i do to make it work? I also changed the climate control from a facelift model when other guy told me that could be a issue
More photos here and here and here from my install.
Thank you.

vlad_skz said:
Hi,
The unit is THIS
I've got my unit, installed it, changed the info display from a facelift model to match the conections with the following diagram D1 , D2 and D3 .
The only issue is that the climate controls have a mind of their own, they change the setting to a/c auto, a/c eco, etc.
I talked to a guy that told me to change the car model from "machine settings" to solve the climate control, i entered a menu but it has everything in Chinese HERE .
In that menu the selected model is 04-15 mazda 6, in the CanBox category are a lot of i guess "firmwares". Should i take them one at a time?
What can i do to make it work? I also changed the climate control from a facelift model when other guy told me that could be a issue
More photos here and here and here from my install.
Thank you.
Click to expand...
Click to collapse
Yes, you need to install one at time, the HU do an automatic reset and after that you check the functions; if everything it's ok you don't need to do nothing, if not, try other configuration.
By the way, you need to be connected to the wifi or gsm.

Yes, you need to install one at time, the HU do an automatic reset and after that you check the functions; if everything it's ok you don't need to do nothing, if not, try other configuration.
By the way, you need to be connected to the wifi or gsm.
Click to expand...
Click to collapse
I am connected to wifi, i tried anything that was my car model and close to my year, steering wheel buttons work everytime however the A/C commandsare still changing their own.

Related

Android PX3 head unit changed speedo to KM from MPH

Hi ive recently bought a android PX3 head unit, installed it ok but it has changed my milage into KM as im in the UK i need the speedo in MPH, there is a app installed called control settings, in this there is a milage setting set to < KM > but it wont change, most of the settings in the control settings app like temp set to C wont change to F either, indicators set to one flash etc the only setting that i can change is CD indicator.
would anyone know if this could be a software bug with the MCU or the android version?
where would i look for a update? i dont even know who the manifacturer is.
The head unit has no physical buttons only a reset hole so can anyone please tell me how i would get to the recovery screen?
ive never had a android head unit before so dont know much about these units.
Can anyone please help me change/fix this setting or another app or update i can install that can change the milage back from KM to miles,
model px3
android 7.1.2
kernel 3.0.101+
mcu MTCE_KSP2_V2.70a_1
thanks for any help
regards
aliexpress.com/item/Android-7-1-7-Car-DVD-player-GPS-Navigation-Stereo-Audio-Radio-DVD-for-Ford-Fiesta/32839001963.html?ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_5000015_10151_10344_10068_10130_10324_10342_10547_10325_10343_51102_10340_10341_10548_5130015_10192_10190_10084_10083_10307_10301_10303_10312_10059_10313_10314_10184_10534_5790011_100031_10604_10103_10605_10594_5060015_10142,searchweb201603_36,ppcSwitch_5&algo_expid=239a9acb-5370-48d4-8bfa-8a9d42e57358-35&algo_pvid=239a9acb-5370-48d4-8bfa-8a9d42e57358&transAbTest=ae803_5&rmStoreLevelAB=5
https://www.ebay.co.uk/itm/CTSFO004...sh=item4413f7f882:g:bXAAAOSwhChZrEtd#shpCntId
would this work with the HU, just connect upthe 3 wires? and not connect the HU plug connector that goes to my info screen?
regards
I have the same problem, in the US with a BMW 90 android head unit. I think there is a bug in the MCU firmware that reverts back to Metric units on boot. Lucky for me, I am able to change things from Control Settings app but I do have to do it every time the unit boots. I have reported this to the seller of my head unit but they don't have any solutions. I am hoping they will fix it in the near future.
did you ever get your problem sorted as I now have the same problem
Hi no the seller didnt want to know and just fobbed me off for months before blanking me on whatsapp, no firmware updat as promised, nothing, so what i did was got a set of these:T - 3 Car Intelligent Steering Wheel GPS, hang up/answer, volume setting, music Controller with Noctilucent Function buttons https://www.aliexpress.com/item/Zee...191.html?spm=a2g0s.9042311.0.0.68734c4dUQL81J whicc work quite well, ive also recently ordered a button stalk like how the older radion buttons were: Car steering wheel button remote control lights car navigation DVD / 2 din android Bluetooth wireless Universal remote control,
https://www.aliexpress.com/item/Car...596.html?spm=a2g0s.9042311.0.0.68734c4dUQL81J but im still awaiting delivery of it.
ill be very happy with the stalk as well as the buttons ive stuck to the centre consol, no where near as cool as the steering wheel controls but i really needed my speedo in MPH
anyways hope this helps somewhat not perfect but better than the speedo flashing between KM/MPH
regards
shadowfoxmi said:
I have the same problem, in the US with a BMW 90 android head unit. I think there is a bug in the MCU firmware that reverts back to Metric units on boot. Lucky for me, I am able to change things from Control Settings app but I do have to do it every time the unit boots. I have reported this to the seller of my head unit but they don't have any solutions. I am hoping they will fix it in the near future.
Click to expand...
Click to collapse
I know this is old but I have the same issue with my Joying head unit and my BMW e90. On start up, I have to go into my settings and set everything to American/Imperial units. Did you ever find a fix to this? It's driving me nuts.

I will pay for help plzzz

I recently purchased a chogath a7 for 03 Accord first is it any good secondly I cannot get the climate display to show for anything the buttons work but no display for it. It's running Oreo with octa core also when I connect to WiFi the time goes back to something not my region in USA NJ I'm willing to pay anyone who can help me.
If
you mean that the AC is not displaying, there is a couple of things you could try but it's not guaranteed it will work. Go to settings, then find car settings and in that menu go into the Factory Settings option. The code is something that you need to find out from the manufacturer. In there there is a canbus menu option. I suppose it will say "No" in there so just try to find the one matching your car. Then press apply and restart the unit. Try to see if the wheel controls work. If not then try to find an app called vehicle information or something similar. Enter that app and see if you get any info. If you dont then get back to the factory settings again and try another CANbus setting. There might be 2-3 that work on your make/model.
If nothing works and you lose the wheel controls, just change that setting back to "No" and you will need to live without AC and open door information
About the steering wheel controls... You mean that you dont get the volume changer graphic on your head unit?
For the wifi issue, you can just disable the auto time setting in the settings and it will never revert back again
Yes and no
With climate my ac works when I got the button but as far as coming up on the screen I just don't know how high or low it is. Like fan speed whether it's dash or dash and feet. The temperature it's set to those things. I get WiFi. And when I go into my settings I don't have any user settings and I do see ether canbus model selections but only one for 7 gen Accord. Is this something a update would fix or a custom rom
Anyone ?
[email protected] said:
Anyone ?
Click to expand...
Click to collapse
Did you ever find a solution? I'm in the same boat as you.
N
Nope i went on eBay and asked other sellers to help me but in the mean time the control for climate stopped working completely. It was only the display but now it don't even control it the lights don't light up when i push the button like they used to either. You can't get any help for these units anywhere. It's frustrating. I can't find ROMs updates help information. Apparently all winner makes cops for more then just head units. The brand don't really mean much because underneath there all the same. I have been trying to find any help at all for one of these units and a 03 Accord ex that has factory navigation and i can't get any help and this site is usually pretty good with help. I learned allot about phones on here but it got nothing with help for the head unit or wiring or anything.
You're best bet is to take it to a mechanic, or a person who deals with chinese head units in real life, and get them to set it up for a small fee
Chinese headunits are pretty wierd, you'll most likely be having to experiment on your own..
[email protected] said:
Anyone ?
Click to expand...
Click to collapse
I may have a solution for you. Solution is a new CANBUS deocder , the one that supports all settings from your car MCU (decoder interacts with your car computer, some cheap Chinese stuff that came originally with multimedia device are somewhat limited - cheap but expensive in hole multimedia order).
Had similar problems and my seller choosen one of the expensive ones, but I did not order it yet, but told me that this one limited in my car cannot get all the functions from car MCU.
It gave me specs for a most possible replacement so all of you in need of a new canbus to resolve your issues look on Ali Express by this :
- origin : CN
- Year : 2019
- External testing certification : CCC
- Model name: ASPI decoder
The Store on Ali Express is called NEVEGETOR STORE
NOTE: generally this one described works with ALPS multimedia devices
Good luck and tell me if your problem is fixed, post here !

Steering wheel buttons bmw E90

Hi, the steering wheel buttons dont work after I put Android 10 multimedia with built-in canbus. I checked factory settings and I cant find bmw e90 in canbus settings. Any ideas ?
no ideas...
Hi,
if the E90 is not there, you should try a similar model from that model year. Usually BMW are using the same platform across the models. Is the E60 there? Or more to the point, which BMWs are available in the settings?
Bmw (Union), Mini (MiXun), 13 Bmw Mini (Bagoo), 15 Bmw mini (Bagoo), Bmw E46 (LZ), I tried all of them
That's odd. The car types are defined in the MCU, so perhaps your's is not up-to-date. Can you go to the "about this device" section in the options and post the MCU version?
f465gt said:
That's odd. The car types are defined in the MCU, so perhaps your's is not up-to-date. Can you go to the "about this device" section in the options and post the MCU version?
Click to expand...
Click to collapse
Ok, the MCU is not that old, actually. I thing the latest are 3.45 or there about. Did you check if your CANBus module is the right one for your car and that it is wired in correctly? If so the "about machine" screen should also show the successful connection.
f465gt said:
Ok, the MCU is not that old, actually. I thing the latest are 3.45 or there about. Did you check if your CANBus module is the right one for your car and that it is wired in correctly? If so the "about machine" screen should also show the successful connection.
Click to expand...
Click to collapse
I know that multimedia has built-in canbus module ( I am not sure that this is correct name), other guy wired the media, because I am not good in this things. You mean that in "About machine" I should have something about Canbus successful connection ?
I don't think so. The CANBus module is a black box that is connected to the back of the radio. In your case it may be, that the steering wheel uses a resistor network. In that case the wires go directly to the plug on the radio, I think they are called Key1/2, or K1/2.
And yes usually in the "About machine" menu there is an entry that tells you if the CANBus is connected or not.
If you go to the settings where you can assign the physical buttons, it shows you on the upper right-hand side if it is a resistor value or a CANBus value. If you push a button you can see the values change if everything works.
f465gt said:
I don't think so. The CANBus module is a black box that is connected to the back of the radio. In your case it may be, that the steering wheel uses a resistor network. In that case the wires go directly to the plug on the radio, I think they are called Key1/2, or K1/2.
And yes usually in the "About machine" menu there is an entry that tells you if the CANBus is connected or not.
If you go to the settings where you can assign the physical buttons, it shows you on the upper right-hand side if it is a resistor value or a CANBus value. If you push a button you can see the values change if everything works.
Click to expand...
Click to collapse
I will show you more pictures of the screen tomorrow, but I dont have anything like Conected CANBus in About machine

[PX5] [RK3368] [S32F0] Autotop Android Headunit - Backup Camera Trajectory Settings and Carplay / Android Auto not working

Hey guys,
I recently bought a Headunit for my Opel/Vauxhall/GM Vectra C by the brand Autotop on AliExpress.
More information here : https://www.aliexpress.com/item/33064243426.html?spm=a2g0s.9042311.0.0.4d374c4djb2lMm
It is a RK3368 unit with 4gb RAM and 64gb ROM and Carplay function. I mainly bought this unit because I expected two main features from it.
Firstly I wanted to be able to have plug and play Android Auto and the unit came with a dedicated usb cable that had the label carplay on it which only fit in one slot on the back of the radio. Sadly when I plugged my phone in nothing happened so I assume that the unit is in fact not Android Auto ready even though the description says so. Am I doing something wrong/ Do I have to set up Android Auto in some way, first?
I also want to install a backup camera and I saw in some other youtube videos that the PX5 Android 9 and Android 10 devices have something called "Extra Settings" where different parameters of the backup camera can be adjusted. One of the things that can be adjusted is the calculation of the reverse trajectory of the car which is a feature that I would really like to have.
Unfortunately my headunit only has "General Settings" "Factory Settings" and "Steering Wheel" settings. And none of these settings contain any adjustments for the backup camera.
Is there a way to "unlock" these extra settings or are they just not present in my Android Build ?
Ive attached my Build Number for further information down below
Thanks in advance for your help!
Yesterday i also got my PX5 4GB/64GB for my Vauxhall Insignia / Buick Regal 2016.
1. I am also missing the "extra settings". There are some options that might solve my other problem with my...
2. Steering wheel Buttons not working. They are working but not in the android Unit, just in my Board Computer
3. The Board Computer doenst seem to communicate with my new Android Radio ...
It was also said Plug and play and in the Describtion they had an image of exactly the same original Radio that i have/had...
I am so dissapointed but i think there is a wrong Setting in the Factory Settings (code 126) - here a Video of my Settings:
and this is waht i see, when i try to programm the steerin wheel buttons (attachement)
I think it comes all togehter on either the missing "Extra Settings" or in a wrong setting in the Factory Settings :-(
I have the same problem with steering wheel buttons. I got a PX5 4GB/64GB Erisin
Carplay dont work at moment, I am thinking to update de firmware...
https://www.aliexpress.com/item/1005001834561873.html
i found out that a cable was not connected to the steering wheel.
I had to open the plastic-frame above the steering wheel and there was a connector.
Now they work but i still can not programm each button to another function. Still grey screen.
I
DaGamma said:
i found out that a cable was not connected to the steering wheel.
I had to open the plastic-frame above the steering wheel and there was a connector.
View attachment 5216727
Now they work but i still can not programm each button to another function. Still grey screen.
Click to expand...
Click to collapse
I can to program each button in Factory settings --- key --- canbus key setting, they work for me
Can you change the language of the car? After installing the language changed to english from the tachometre. In the car app there is no setting to change language.
I dont mean the android language,

Bmw x5 e70 problem mit android HU

Hello everyone. It is a BMW X5 E70 2008, ccc. I bought HU on Aliexpress (the version is in the picture). After installation, the OEM BMW menu does not work (no signal), the usb does not show and the electronic steering wheel adjustment does not work. All cables well connected, checked several times. Can someone help me enable these functions? Thanks in advance
Hi , did you get CANBUS box with this unit?
Canbus is used to connect multimedia device with car functions and car ECU.
If you have one installed probably wrong settings are set for car. You can change it in factory settings menu (hidden menu with PIN code access).
And consult with your seller about bought head unit rather than writing problems here on forum.
As for system update, you can ask seller for update or find on this forum or net, by search term "ZLH_BMH" - that's your version of software for unit.
Hello and thanks for your reply. I have the canbus and it is connected properly. Checked several times by an auto electrician. Everything works as it should except the oem bmw menu. In the factory settings you're talking about, I tried all the options, but it's always the same - no signal. I think it's definitely a software problem and I can't find an update here or anywhere. And the seller is completely useless
serbia4ever said:
Hello and thanks for your reply. I have the canbus and it is connected properly. Checked several times by an auto electrician. Everything works as it should except the oem bmw menu. In the factory settings you're talking about, I tried all the options, but it's always the same - no signal. I think it's definitely a software problem and I can't find an update here or anywhere. And the seller is completely useless
Click to expand...
Click to collapse
I would try to change canbus box with other one, another model like HIworld or Simplesoft, obviously there is no communication between ecu of car and head unit or cables behind unit for keys / steering wheel are misconnected or misswired. Check for wiring diagram for this device, find it one net somewhere.

Categories

Resources