Database Users

How to Root Samsung Galaxy J7 (SM-J700H) Exynos 3G Model & TWRP

How to Root Samsung Galaxy J7 (SM-J700H) Exynos 3G Model & TWRP.
Please Follow step by step guides.....
***Things You Need:
Windows PC
USB Cable
80% Battery Charge available
***Please do a backup of your important files, cause if you do anything wrong or softbrick your mobile***
• 1st Download the rar file from Link (Delete Spaces) and extract the folder. Link: https: //mega. nz/#!VFgCGDpS!4fm1uvNRORAkrkQJ0KdaoiRCVS_sCaw3TVYJjHzinAU
• Then into the folder Install Samsung USB drivers in your PC.
• Now go to your mobile Settings>About Device>Build Number (Tap Continuously 7 times to enable Developer Options)
• Then connect your Mobile to your PC via USB cable and copy the "UPDATE-SuperSU-v2.46.zip" file to the internal storage of the phone. Don't extract this file.
• Enable USB Debugging on your device. (Settings > Developer Options > USB Debugging)
• You need to enable OEM bootloader unlock in your developer options to install the TWRP recovery! Go to > ‘Settings’ > ‘Developer Options’ > ‘Turn on OEM unlock’ on.
***Install TWRP Recovery:
1. Open Odin_v3.09 folder on your PC and double click "Odin3 v3.09.exe" file. This will open an Odin window.
2. Boot your Galaxy J7 into Download mode: Turn off your mobile. Press (Volume Down) + (Home) + (Power) button together and hold them until you see Samsung logo. Release them once you encounter a warning screen on your device. Press Volume Up to acknowledge the warning. This takes you to download mode.
3. Connect your Mobile device to the PC using an USB cable and make sure your device is detected. An “Added!! message will appear in Odin’s message box.
4. Now Set up Odin as follows:
Check the AP box add the "twrp-2.8.7.0-j7elte.tar" file. (Do not extract it)
Check Auto Reboot and F.Reset Time options.
See Odin Setup Image Here (Delete Spaces). Link: https: //mega. nz/#!tZ5wkaBa!Ul8cnigZIIOSdPYiIGJvtIzfdf58h_4hWFDbBh1uLb4
5. Then click START button on Odin to begin the installation process.
6. After your device is rebooted you will see “PASS!” message in Odin and quickly remove your battery whenever you see Samsung logo on Startup.
***Rooting Your Device:
• Now put your mobile battery back and press (Volume Up) + (Home) + (Power) buttons together until you see Samsung logo. It will boot your mobile into TWRP recovery mode.
• Select Install Zip from TWRP.
• Now locate to Internal or External storage where you copied the "UPDATE-SuperSU-v2.46.zip" files before and select this file to Install. Slide to unlock, it will install the "UPDATE-SuperSU-v2.46.zip" into your mobile.
• Now reboot your Mobile.
After some minutes your phone will reboot. You will find your device rooted and SuperSU App installed.
You have successfully rooted Samsung Galaxy J7 with TWRP recovery installed.
To check your device rooted or not? You can test it by an app called "Root Checker". You can download this from Play Store.
Hit Thanks Button Please! :good:

What will happen if you don't pull off the battery? Will it softbrick the phone?

Bipinpdl said:
What will happen if you don't pull off the battery? Will it softbrick the phone?
Click to expand...
Click to collapse
It should work fine without removing battery but few phones can't go to TWRP mode. And this tricks wored for them, that's it! Hope you understand. Let me know if it worked for u and Hit the thanks button for me!

ok how to install twrp anyone ?

Hello guys well i am struggling to install twrp after updating from lollipop but when i do it nothing happens i need help i have j500fn mm

By Odin Method On PC

AndroidTutorials said:
Hello guys well i am struggling to install twrp after updating from lollipop but when i do it nothing happens i need help i have j500fn mm
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960
above is the thread link for j5 MM twrp by Ganesh varma.
follow these steps:
1.Download and install Odin,usb drivers.
2.Power off the device and boot into download mode by holding [VOLUME DOWN/HOME & POWER].
3.A Warning screen appears,now press volume up once and connect the phone to the PC.
4.Open Odin with admin rights and you should see the phone added at some ID COM: port if not then you have to download and install the appropriate drivers.
5.Now click on AP and select the downloaded recovery file.
6.UNcheck the ''autostart'' options in odin >> VERY IMPORTANT<<
7.Hit start and the flashing will be done in a few seconds and the device reboots.
8.Hold VOLUME UP+POWER+HOME buttons to boot into recovery.
Enjoy!!
CHECK THE VIDEO FROM BELOW LINK IF STILL HAVE PROBLEMS.
https://youtu.be/z-8CZdwla-A

androfan86 said:
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960
above is the thread link for j5 MM twrp by Ganesh varma.
follow these steps:
1.Download and install Odin,usb drivers.
2.Power off the device and boot into download mode by holding [VOLUME DOWN/HOME & POWER].
3.A Warning screen appears,now press volume up once and connect the phone to the PC.
4.Open Odin with admin rights and you should see the phone added at some ID COM: port if not then you have to download and install the appropriate drivers.
5.Now click on AP and select the downloaded recovery file.
6.UNcheck the ''autostart'' options in odin >> VERY IMPORTANT<<
7.Hit start and the flashing will be done in a few seconds and the device reboots.
8.Hold VOLUME UP+POWER+HOME buttons to boot into recovery.
Enjoy!!
CHECK THE VIDEO FROM BELOW LINK IF STILL HAVE PROBLEMS.
Click to expand...
Click to collapse
Ive tried that but device says custom and no recovery

AndroidTutorials said:
Ive tried that but device says custom and no recovery
Click to expand...
Click to collapse
Hmm.. nowadays some of the Marshmallow version are coming with locked bootloader.. may be because of that u are getting error.
In such case you need to flash each and every version of marshmallow Firmware and check whether it supports flashing twrp or not from the below link. If you are able to flash twrp or certain frimware, that means its bootloader is not locked.
https://www.sammobile.com/firmwares/database/SM-J500FN/
or simply try this firmware from below link:
https://www.sammobile.com/firmwares/download/113125/J500FNXXU1BPK3_J500FNOXA1BPK3_PHE/
Dont forget to make ''on'' oem unlock and usb debugging from developer option.

This is perfect root tutorial in few minutes and everyone says it works

Ok so I think it's because it's a bug I put lollipop on and now it's all done their must be something wrong unless I have to flash marhmellow first ☺

Downgrade to 5.1.1

Hello,can someone tell me step by step how to downgrade from 6.0.1 to 5.1.1 stock firmware ITV?

bubugaga said:
Hello,can someone tell me step by step how to downgrade from 6.0.1 to 5.1.1 stock firmware ITV?
Click to expand...
Click to collapse
☆Why you want to downgrade your firmware? Nougat is on the way for S6edge plus..Without any proper reason kindly don't try to downgrade your firmware, it will might cause efs corruption for your device as lower modems failed to read newer efs partitions..Still you want to downgrade then follow guide on your own risk with backing up your current stock firmware.
●BACKUP YOUR DATA STORED ON INTERNAL STORAGE AS YOU NEED TO DO FULL WIPE BEFORE DOWNGRADING FIRMWARE
●GUIDE-
1)Download latest odin and samsung usb drivers for your device.
Extract both odin and usb drivers to specific folders(Odin to Odin and Usb drivers to Usb drivers Folder respectively)
Install usb drivers on your pc.
2)Download latest 5.1.1 software for your phone from sammobile.com/firmware section
https://www.sammobile.com/firmwares/download/58989/G928FXXU2AOJ5_G928FITV2AOJ1_ITV/
Check the above link and see you model is SM-G928F and Country is ITALY Csc code-ITV.
If i am not right then download right firmware for your device and country
(Extract firmware file in firmware folder respectively , you will get tar.md5 filein that folder)
3)Press volume up+power+home button simultaneously until you see samsung galaxy s6edge+ logo, release keys.
Your now in stock recovery.
From there wipe data/factory reset, wipe cache,wipe internal storage make full wipe.
Reboot device after wipe and do initial setup.
4)Go to settings>About device>Software info>press build no for 7 times until developers options enabled
6)Go to setting>developers options>enable oem unlocking and usb debugging
7)Now press volume down+power +home button simultaneously.
You are now in download mode.
Press volume up to continue.
8)Now on pc run downloaded odin.exe as device administrator
9)Connect your device using original samsung usb cable through main usb port
10)Let pc to install usb drivers for your device, after installing drivers you will find your device is added in Odin "COM:"
11)Now click AP in odin, go to tar.md5 you previously extracted in firmware folder and add it to AP
It will take some time to b ready
12)From odin options>check auto reset and reboot options selected*Dont select auto repatriation option
13)Hit run in Odin..Your software will start to flash..Wait until flashing complete..Odin will give PASS message after completion And your device will be reboot itself
14)Wait for some time, You will get initial setup wizzard
15)In case you stuck at samsung logo for long time, Press volume down+Power button to switch off device..When screen turns off, immediately press Volume up+power +home buttons simultaneously to get into stock recovery..From there wipe data/factory..After reset complete,reboot your device.
●DO IT AT YOUR OWN RISK!! NO ONE INCLUDING ME OR ANY XDA MEMBER WILL BE RESPONSIBLE FOR ANY DAMAGE OR BRICK TO YOUR DEVICE

[GUIDE][TUTORIALS] Odin & SmartSwitch - Flash Stock Firmwares/TWRP/CF-Autoroot

●BRIEF INTRODUCTION :-
•Here Is All In One Guide For Various Flashing Processes For Samsung Galaxy Devices Using Windows PC
•Official Stock Firmware flashing Including Upgrading And Downgrading Firmwares Using Samsung Odin
Note :-
*Downgrading Of Stock Firmware Is Neither Officially Supported By Samsung Nor By Xda Community.
*Do It At Your Own Risk.
•Emergency Software Recovery Using Samsung SmartSwtich
•TWRP-Custom Recovery Flashing Using Samsung Odin
•CF-Autoroot-Root Tool Flashing Using Samsung Odin
●WHO SHOULD USE THE GUIDES :-
•Users Who Want To Manually Upgrade Their firmware to Higher Android Version OR Users Who want to Manually Downgrade Their firmware to Lower Android Version
•Users Who are facing Various DM-Verity/SW-Check Fail/Custom Binary Blocked by FRP/Bootloops Due to Flashing Wrong Custom Roms Or Mods Or Fixes etc. Hence Unfortunately Have to Flash Stock Official Firmware
•Users Who want to Install TWRP-Custom-Recovery
•Users Who want to Root their devices using CF-Autoroot-Root Tool
●REQUIREMENTS :-
•Samsung Device with OEM Unlocking And USB
Debugging Options Enabled from Developers Options
Note :-
To enable Developers Option Follow The Steps Below
*Go to Settings/About Device
*Press On Build Number For 6-7 Times until you see Developers Options Enabled Popup
*You will be able see Developers Options In Settings
*Go To Settings/ Find Developers Options Mostly At The End
•Device Should Be Charged upto 60-70% as Flashing Process May Sometimes Lengthens according to various Devices/Firmware Sizes As Well As Internet Connection Speed in case of SmartSwitch As It Uses Data For Downloading/Updating Firmwares Online
•Original Samsung OEM Usb Cable As Other Cables Would sometimes Give Device Not Recognized or Flashing Interrupted or Flashing Stuck At Certain Points like Errors
•Windows PC With Samsung Usb Drivers Installed According To your Device Model Number
LINK For Samsung Usb Drivers Download:-
https://androidmtk.com/download-samsung-usb-drivers
•Latest Samsung's Odin Tool For Windows PC
Note :-
*Extract Odin.rar Or Odin.zip to Specific Folder to get Odin.exe File
LINK For Samsung Odin Download:-
http://www.droidviews.com/download-odin-tool-for-samsung-galaxy-devices-all-versions/
• Samsung's Official SmartSwitch Tool For Windows PC
LINK For Samsung SmartSwitch Download:-
http://samsungsmartswitch.org/
Note :-
*If You want to use Odin Then install Odin Only on PC Or If You want to use SmartSwitch then install SmartSwitch Only On PC
*Simultaneous Appearance of Both Tools On PC will Sometimes May probably give Error while Flashing Firmwares through Odin
•Samsung Stock Official Firmware for Your Device Model Number/Country/CSC
LINKS For Samsung Official Stock Firmware Download:-
1)https://www.sammobile.com/firmwares/
2)http://samsung-updates.com/device/
3)http://updato.com/firmware-archive-select-model
4)https://androidmtk.com/download-samsung-stock-rom
Note :-
*The Downloaded Firmware should be Latest According to availability for Your Country
Since Some Courtiers Got Official 7.0 Nougat While Some Are Still Stucked At 6.0.1 Marshmallow Yet
*As well As Firmware should be accurate for Your Device Model Number/Country/CSC to avoid Further Flashing Errors Through Odin
•Trick of booting your Samsung Device into Download Mode using Hardware Key Configuration
Note :-
Follow Below Steps To Boot Your Device Into Download Mode
*Power Off your device
*Press Volume Down+Home+Power Buttons Simultaneously Untill You See Download Mode Window
*Press Volume Up Key To Continue To Download Mode
●CAUTION :-
No One Here Within XDA Community Including Me Will Ever Be Responsible For Bricked Devices
So Kindly Try Any Of Following Guide At Your Own Risk

●SAMSUNG ODIN FLASHING GUIDE TO FLASH STOCK OFFICIAL FIRMWARES ON SAMSUNG DEVICES FOR COMPLETE STOCK/UNROOTED EXPERIENCE
●IMPORTANT NOTE :-
This Guide Can Be Used For Both Upgrading And Downgrading Of Stock Official Firmwares
Only Precaution Should Be Taken Is That In Case Of Upgrading Firmware Kindly Choose Latest Dated Higher Version Of Android OS While In Case Of Downgrading Firmware Kindly Choose Latest Dated Lower Version Android OS Available For Your Device/Country/CSC
●INSTRUCTIONS :-
•As Per Requirements I assume You have
*Enabled OEM Unlocking And USB Debugging Options From Developers Options
*Downloaded/Installed Latest Samsung Usb Drivers For Your Device on PC
*Downloaded/Extracted/Installed Samsung Odin On Your PC
*Downloaded/Extracted Latest Official Stock Firmware For Your Model Number/Country/CSC
•Run Odin.exe as Administrator
•You Will See Odin Window with Various TABS like BL/AP/CP/CSC/UMS As Well As Certain Odin Options like Auto Reboot/F-Reset Time/Re-Partion/PIT File Add etc.
•Extract the Downloaded Stock Official Firmware in Specific Folder And You will get ***.tar.md5 like file of Stock Firmware in Specific Extracted Folder
•Add the Extracted ***.tar.md5 Firmware File in AP TAB of Odin
Note :-
*It will take Some Time to Add Firmware file into Odin According To Firmware Size
*So Keep Some Patience And Let Odin Ready For Flashing Process
•Be sure in Odin Options Only Auto-Reboot/F-Reset Time options are Ticked
•DON'T SELECT Re-Partion Or PIT File Add Options Unless Your Facing Null/Generic IMEI Or Baseband Unknown Related issues only
Note :-
*You Will Need to Download PIT files for Your Specific Device Model Numbers For Re-Partion of Partion Table In Case Of Null/Generic IMEI Or Baseband Unknown Issues
•Boot Your device into Download Mode Connect To PC using Original OEM Samsung Usb Cable Into Main Usb Port Of PC
Note :-
*Secondary Usb Hubs Sometimes May Produces error Of Device Not Recognized etc.
•Allow PC to install Samsung Usb Drivers for your Device
•You can see Your Device is added in Odin as its Highlighted in ID:COM Section on Left corner of Odin Windows
•Now your ready to flash Stock Firmware
Note :-
*ID:COM Will Look Like for eg. IDORT21 Etc.
•Press on Start Button in Odin, It will automatically start flashing process And You can see flashing log in Odin Side Window
•It will take some time to flash Stock firmware according to Device/Odin version/Firmware Size So Keep Some Patience And Stay Relax
•After flashing process gets complete, You will see "Pass" Message at the top of Odin Window
•Your Device will Reboot automatically
•Disconnect Your Device from PC
•Wait untill Software Updating/Installing Process Gets Completes on Device
•Afterwards Your device will Booup normally to Initial Setup Wizzard
•If In Case Your Device gets Stuck at Samsung Galaxy Logo For Long Time More than 10-20 minutes
Don't Worry Your Device Is in Soft BootLoop And There Is A Solution to fix it
Note :-
To Get Out Of Bootloop Follow The Steps Below
*Press Volume Down+Power Button Untill Screen gets Turned Off to Power Off Your Device
*Quickly Press Volume Up+Power+Home Buttons Simultaneously untill You See Samsung Galaxy Logo
*Release Keys Now
*You will Get Into Stock Recovery
*Select Wipe Data/Factory Reset Option There
*Wait Until Wiping Process get Completes
*After Wiping Process Get Completes Reboot your Device
*This time Your Device should BootUp normally without any issues

●SAMSUNG SMARTSWITCH GUIDE FOR EMERGENCY SOFTWARE RECOVERY ON SAMSUNG DEVICES
●INSTRUCTIONS :-
•Open Samsung SmartSwitch You have installed On Your PC
•You will see SmartSwitch Window
•Click On the More Option at the top Right Corner in SmartSwitch Window
•Select Emergency Software Recovery And Initialization Option From Menu
•You will See Emergency Software Recovery And Initialization Window
•Select Device Initialization Option
•You will be Asked to Enter Your Device Model Number
Note :-
*Device Model Number Should Be Like For Eg. SM-N920C/I/G/F
•In Next Step It will ask You to Enter Device Serial Number Which You Can Find Printed On OEM Original Box Or On the Back Panel Of Device Or In Settings> About Device> Status> Serial Number
Note :-
*Device Serial Number Should Like For Eg. RZ8G*****
•Click Ok For Approval Whenever It Will Be Asked Until You See Some Instructions Window in SmartSwitch
Note :-
*Instructions Should Look Like "Make Sure Your Device Is Turned Off/Put Your Device Into Recovery Mode i.e.Download Mode" Etc.
•Put Your Device into Download Mode As per Instructed Into 'REQUIREMENTS' Section Using Hardware Keys Configuration
•Connect Your Device to PC using Original OEM Samsung Usb Cable To PC
•Click On "OK" Button In Instructions Windows
•SmartSwitch Will Automatically Detect/Download/Install Latest Available Stock Official Firmware for Your Device
•Wait And Keep Patience Untill Whole Process is Being Completed
•Your Device will Reboot Automatically After Installation Process Completes Successfully
•If In Case Your Device Stuck at Samsung Galaxy Logo For Long Time More than 10-20 minutes Then Don't Worry Your Device Is in Soft Bootloop AND There is A Way to fix it
Note :-
To Get Out Of Bootloop Follow The Steps Below
*Press Volume Down+Power Button Untill Screen gets Turned Off to Turn Off Your Device
*Quickly Press Volume Up+Power+Home Buttons Simultaneously Untill You See Samsung Galaxy Logo
*Release Keys Now
*You will Get Into Stock Recovery
*Select Wipe Data/Factory Reset Option There
*Wait Until Wiping Process Get Completes
*After Wiping Process Get Completes Reboot Your Device
*This Time Your Device Should Bootup Normally Without Any Issues

●TWRP-CUSTOM-RECOVERY FLASHING GUIDE USING ODIN ON SAMSUNG DEVICES
●INSTRUCTIONS :-
•First Step is to Download Latest TWRP-Custom-Recovery For Your Specific Device Model Number
•You Can Grab Latest Version Of TWRP-Custom-Recovery From Official TWRP Website Below Posted
Note :-
*Select And Download Latest twrp***.img.tar File for Your Device Model Number Correctly
Official Website For TWRP-Custom Recovery Download:-
https://twrp.me/Devices/
•Open Odin On PC As Administrator And Add twrp***.img.tar into AP TAB of Odin
Note :-
*In case If You have downloaded twrp***.zip Then
Extract it to Specific Folder to get twrp***.img.tar file
•In Odin Options Be Sure To Un-Tick Auto-Reboot Option Also Don't Select Re-Partion Option
So Make Sure You Have Only Ticked F-Reset Time Option In Odin Options
Note :-
*If You Tick Auto-Reboot Option Then You will Get into Stock Recovery Again Even After flashing TWRP Using Odin
*So Better to Un-Tick Auto-Reboot Option And Manually Boot Into TWRP-Custom Recovery After Flashing Successfully By Hardware Keys Configuration
•Boot Your Device Into Download Mode And Connect To PC Using Original OEM Samsung Usb Cable
•You will See Your Device Is Added And Highlighted In ID:COM Port
•Click On "Start" Button In Odin And Wait Untill Odin will Flash TWRP-Custom-Recovery
After Flashing Completes Successfully You will See "Pass" Message In Odin
•Disconnect Your Device From PC Even if Its in Download Mode
•You Have To Boot Your Device Into TWRP-Custom-Recovery Manually By Using Hardware Keys Configuration
Note :-
To Get Into TWRP-Custom-Recovery Manually Follow The Steps Below
*Press Volume Down+Power Button To Turn Off Device
*Immediately Press Volume Up+Power+Home Buttons simultaneously After Device Screen Gets Turned Off
*You Will See Samsung Galaxy Logo
*Release Keys Now
•Your now in TWRP Recovery And Ready To Flash
*Custom Roms/Mods/Fixes
*Systemless SuperSU/Magisk Root Zips
Note :-
*If Your Planning To Flash Any Custom Roms/Mods/Fixes Or Systemless SuperSu/Magisk Root Zips Files Using TWRP
*Then Make Sure You Have Downloaded Those Files And Saved Them Already Into Your Internal Storage/External SD-Card Before Flashing TWRP-Custom-Recovery

●CF-AUTOROOT- ROOT TOOL FLASHING GUIDE USING ODIN ON SAMSUNG DEVICES
●INSTRUCTIONS :-
•First Step Is To Download Official CF-Autoroot-Root Tool For Your Device Model Number According To Android Version And Build Number
•You Can Download Official CF-Autoroot-Root Tool for Your Device Model Number And Android Version From Official Website Listed Below
Official Website For CF-Autoroot-Root Tool Download:-
https://autoroot.chainfire.eu/
•Extract CF-Autoroot.Zip in Specific Folder to get CF-Autoroot.tar file to be Flashed Using Odin
•Open Odin On PC As Administrator And Add CF-Autoroot.tar into AP TAB of Odin
•Make Sure To Tick Only Auto-Reboot And F-Reset Time Options In Odin Options
Dont Tick Re-Partion Option In Odin Options
•Put Your Device Into Download Mode And Connect To PC Using Original OEM Samsung Usb Cable
•You Will Eee Your Device Is Added And Highlighted In
ID:COM Port
•Click On "Start" Button In Odin
Wait Untill Odin will flash CF-Autoroot
You See "Pass" Message In Odin After Successful Flashing
•Your Device Will Reboot Automatically After Flashing Completes
Disconnect It From PC
You Wipl See On Device Screen That CF-Autoroot is Rooting Your Device
Note :-
*You Will See Some Red Command And Process Logs On Your Device Screen While CF-Autoroot Is Rooting Your Device
•Keep Patience untill Rooting process completes
Don't Turn Off Device while Process is going on Even if it will lead to some BootLoops
Your device will Reboot Automatically after Rooting Process completes.
•You Will See SuperSU Wpp In Default App-Drawer After Your Device Bootup

Could you tell me even though i took ota update to naugat, if i could downgrade back to marshmallow by flashing throught odin?, and if i do what could happen if anything?

desmond462 said:
Could you tell me even though i took ota update to naugat, if i could downgrade back to marshmallow by flashing throught odin?, and if i do what could happen if anything?
Click to expand...
Click to collapse
1)To be say honestly downgrading is not officially supported by Samsung also But yes you can successfully downgrade to 6.0.1 from 7.0 (I personally downgraded to 6.0.1 once successfully due to issues on stock 7.0)
2)You only need to follow the guide as instructed carefully Also the version of 6.0.1 MM you will choose to downgrade to should be latest dated (I mean the latest 6.0.1 firmware for your device and country available on Sammobile.com casually)
3)Hence you can find some instructions within my own Post in which i mentioned step by step installations instructions (Go To Page No 65 And Find My Post In Reply To Okiera29 There Regarding Downgrading To MM From Nougat)
https://forum.xda-developers.com/note5/help/help-thread-question-noob-friendly-t3220229/page65

DayDreamer said:
1)To be say honestly downgrading is not officially supported by Samsung also But yes you can successfully downgrade to 6.0.1 from 7.0 (I personally downgraded to 6.0.1 once successfully due to issues on stock 7.0)
2)You only need to follow the guide as instructed carefully Also the version of 6.0.1 MM you will choose to downgrade to should be latest dated (I mean the latest 6.0.1 firmware for your device and country available on Sammobile.com casually)
3)Hence you can find some instructions within my own Post in which i mentioned step by step installations instructions (Go To Page No 65 And Find My Post In Reply To Okiera29 There Regarding Downgrading To MM From Nougat)
https://forum.xda-developers.com/note5/help/help-thread-question-noob-friendly-t3220229/page65
Click to expand...
Click to collapse
Ok thank you for your reply, I understand. I also had some trouble with drk verity fail issue when I factory reset because I run into issue with my efs, it was failing to boot ,but after searching the internet I found out how to fix the efs issue and then I flash stock over and then run into trouble with drk verity fail issue, but found a script to bypass this error ,but I read that whenever I flash or factory reset I will run into this drk verity fail issue again, so I must flash this script to bypass this error.
So my question after all i have explain is, will it be a problem to downgade to 6.0 because of those previous issues ?

desmond462 said:
Ok thank you for your reply, I understand. I also had some trouble with drk verity fail issue when I factory reset because I run into issue with my efs, it was failing to boot ,but after searching the internet I found out how to fix the efs issue and then I flash stock over and then run into trouble with drk verity fail issue, but found a script to bypass this error ,but I read that whenever I flash or factory reset I will run into this drk verity fail issue again, so I must flash this script to bypass this error.
So my question after all i have explain is, will it be a problem to downgade to 6.0 because of those previous issues ?
Click to expand...
Click to collapse
1)Can't say exactly without trying or downgrading firmware as i said already neither samsung nor any community will officially support downgrading of firmware as it may cause various baseband and imei related issues due to downgrading of bootloader
2)But for safety you can take full Nandroid backup of your current stable rom using TWRP and Try to downgrade firmware at your own risk
Regards

DayDreamer said:
1)Can't say exactly without trying or downgrading firmware as i said already neither samsung nor any community will officially support downgrading of firmware as it may cause various baseband and imei related issues due to downgrading of bootloader
2)But for safety you can take full Nandroid backup of your current stable rom using TWRP and Try to downgrade firmware at your own risk
Regards
Click to expand...
Click to collapse
ok thank you. So i end up downgrading back to marshmallow and i did run into the issue with drk and i flash the script to bypass that error and boot up successfully, but at the moment am searching for a fix to the drk failing on the internet, i found that alot of persons have run into this problem, but i see wat i can find.

desmond462 said:
ok thank you. So i end up downgrading back to marshmallow and i did run into the issue with drk and i flash the script to bypass that error and boot up successfully, but at the moment am searching for a fix to the drk failing on the internet, i found that alot of persons have run into this problem, but i see wat i can find.
Click to expand...
Click to collapse
You can find more information in below listed thread about DM-verity with DRK check
https://forum.xda-developers.com/note5/help/how-to-solve-dm-verity-verification-t3293306

Gr3atGeek said:
•You will See Emergency Software Recovery And Initialization Window
•Select Device Initialization Option
Click to expand...
Click to collapse
What version of Smart Switch offers initialization for SM-N920C Note 5's? The latest version doesn't include initialization anymore at all, and an older version I tried stated that initialization was not supported for Note 5's.

All right, I'll see what i do.
Thank you very much.

[HELP] TWRP Recovery for J5 Prime (SM-G570F) ???

Hello.
I own a Samsung Galaxy J5 Prime 2016 SM-G570F
I'm looking to flash it with the latest TWRP recovery but sadly I couldnt find it on the official website
I want to install the latest version of twrp 3.2.1
On my phone, can anyone help me please

Someone help please

There is no TWRP 3.2.1.0 for your phone, but I found 3.1.1, it works with almost every custom ROM and other flashable things, like root manager. https://forum.xda-developers.com/galaxy-j5/samsung-galaxy-j5-prime-roms-kernels-recoveries--other-development/twrp-twrp-galaxy-j5-prime-t3605990
If you want a root manager, I recommend Magisk Manager, the best of the best for me.
If you want a custom ROM, download Resurrection Remix, so amazing!
You know how to flash TWRP?
- You must have Samsung Odin, TWRP MD5 (TAR) file.
- DISABLE OEM UNLOCK in Developer Settings in your phone. (Tap 7 times the build number in your phone (Settings -> About device))
- Turn off the phone
- Click Vol- , Home and Power buttons at once
- When you'll see warning message, click Vol+
- Open Odin, make sure you have "F. Reset Time" confirmed.
- Click PDA button (can be AP) and select your TWRP file
- Now connect your phone to the computer
- You should see "Added!" in Odin
- Now click the "Start" button
- If it's failed, remove battery from the phone for 5 minutes and put it back again
* Remove the cable too
- Turn the Download Mode again
- Connect the phone, you should see "Added!" again
- Click the "Start" button
- It it failed again, just restart flashing
- You should see "All threads completed (succeed 1 / failed 0)
- Be happy of your new TWRP on the phone!