Database Users

[Q] Grand Prime boot problem

I have Galaxy Grand prime duos stuck at booting animation
I try to enter recovery mode (press and hold the Volume Up, Home and Power buttons together till Samsung logo flash twice then leave Power button) but it keeps restarting and i can't reach recovery mode
any help plz

No one answered me
my mobile still dying :crying:

I think u have to press volume - instead of volume +..
if still it don't open.
Try to flash a new rom from download mode..

Your rom get corrupted you been to flash a New rom trought odin and download Mode in the device

Fixing
Hello ..
*Your current firmware is looks to be damaged or corrupted
*You need to flash the official Firmware again using ODIN software
------------------------------------------------------------------------------------
*Download the latest Compatible ODIN Version With Galaxy Grand Prime
---> goo.gl/cjglQW
*Download the latest Firmware available for the Galaxy Grand Prime [25/1/2015]
---> goo.gl/Vq8dvt
-------------------------------------------------------------------------------------
*Download Both files ..
*Run ODIN
*Put your device into the Download mode (Power+Home+Volume Down)
*Flash your new Firmware
*Wait ..! Done !
*Enjoy

check url
louis0 said:
I have Galaxy Grand prime duos stuck at booting animation
I try to enter recovery mode (press and hold the Volume Up, Home and Power buttons together till Samsung logo flash twice then leave Power button) but it keeps restarting and i can't reach recovery mode
any help plz
Click to expand...
Click to collapse
AmGaD-SaLaH said:
Hello ..
*Your current firmware is looks to be damaged or corrupted
*You need to flash the official Firmware again using ODIN software
------------------------------------------------------------------------------------
*Download the latest Compatible ODIN Version With Galaxy Grand Prime
---> goo.gl/cjglQW
*Download the latest Firmware available for the Galaxy Grand Prime [25/1/2015]
---> goo.gl/Vq8dvt
-------------------------------------------------------------------------------------
*Download Both files ..
*Run ODIN
*Put your device into the Download mode (Power+Home+Volume Down)
*Flash your new Firmware
*Wait ..! Done !
please check URL website
Click to expand...
Click to collapse

kindly give again the website of the firmware.. thankyou

Look at my grand prime original developers where I show to flash and from where to downloads firmware

You'd better download a firmware backup of your Handheld and install Odin in your PC in case there's something wrong happens in your device.
Sent from my SM-G530H using XDA Free mobile app

i have hold the power botton and home botton but it only boot to factory mode please help me

nelvicv3 said:
i have hold the power botton and home botton but it only boot to factory mode please help me
Click to expand...
Click to collapse
Home, Volume Down and Power buttons.

Abd El -Rahman Alswaf said:
AmGaD-SaLaH said:
Hello ..
*Your current firmware is looks to be damaged or corrupted
*You need to flash the official Firmware again using ODIN software
------------------------------------------------------------------------------------
*Download the latest Compatible ODIN Version With Galaxy Grand Prime
---> goo.gl/cjglQW
*Download the latest Firmware available for the Galaxy Grand Prime [25/1/2015]
---> goo.gl/Vq8dvt
-------------------------------------------------------------------------------------
*Download Both files ..
*Run ODIN
*Put your device into the Download mode (Power+Home+Volume Down)
*Flash your new Firmware
*Wait ..! Done !
please check URL website
Click to expand...
Click to collapse
Go here http://www.sammobile.com/firmwares/
Make account and search your model number ie; sm-g531h
Click to expand...
Click to collapse

grand prime 4g
nelvicv3 said:
i have hold the power botton and home botton but it only boot to factory mode please help me[/QUO
check once by changing touch display...or remove touch connector from display and try on.....
Click to expand...
Click to collapse

EXACTLY!!!!!
louis0 said:
I have Galaxy Grand prime duos stuck at booting animation
I try to enter recovery mode (press and hold the Volume Up, Home and Power buttons together till Samsung logo flash twice then leave Power button) but it keeps restarting and i can't reach recovery mode
any help plz
Click to expand...
Click to collapse
Yes bro i am facing same problem i cant reach my bootloader option. plz help us guyz

Devansh11 said:
Yes bro i am facing same problem i cant reach my bootloader option. plz help us guyz
Click to expand...
Click to collapse
Try to enter download mode. HOME+VOLUME DOWN + POWER
Also when entering either recovery or download mode I find it helps to hold HOME+VOLUME UP and then press POWER.
If you can enter download mode but not recovery maybe your recovery is corrupt, reflash your firmware using ODIN

Well that literally happened to me and I fixed it by installing a custom recovery but its cuz of installing a wrong root version for android. U can flash a custom recovery and tell us.

ty bro
u0aol said:
Home, Volume Down and Power buttons.
Click to expand...
Click to collapse
CAN u plz tell how to reinstall flash

Devansh11 said:
CAN u plz tell how to reinstall flash
Click to expand...
Click to collapse
www.sammobile.com/tag/galaxy-grand-prime - Download the correct firmware for your device.
Ensure all of the Samsung USB drivers have been installed on your computer.
Place your phone into download mode (Home+Volume Down+ Power)
Open ODIN on your computer (Version 3.10 works best for the Grand Prime, but the newest version would be optimal)
Plug your USB cable into your cellphone and into your computer.
ODIN will say *ADDED* in its text output.
Press AP or PDA (Depending on ODIN version)
Select your downloaded firmware packet (It is either a .md5 file or a .md5.tar)
Press start and ODIN will automatically flash your firmware for you.
ODIN will say *SUCCESS* if completed and will automatically restart your phone.
Wait until your phone boots.
That is how you flash firmware using ODIN. I hope it helps.
Please in future search these forums as there are a hundred different tutorials on flashing.
:good::good:
---------- Post added at 04:46 AM ---------- Previous post was at 04:36 AM ----------
Honex98 said:
Well that literally happened to me and I fixed it by installing a custom recovery but its cuz of installing a wrong root version for android. U can flash a custom recovery and tell us.
Click to expand...
Click to collapse
Corrupting your recovery is NOT an issue that would happen because of a bad flash of root files.
Flashing a custom recovery such as TWRP will NOT solve issues with root or any issues caused by flashing the wrong root file.
Firmware corruption caused by flashing an incorrect root file is only fixable by reflashing your firmware and starting from the begining, custom recovery has nothing to do with that.
TWRP makes it easier to fix the issue, but it is not itself a fix for the issue.

hi i am using grand prime galaxy . but i got some text with blue and red it shows muticore odin mode etc

i am not able to enter recovery mode of smG530h
i can enter recovery mode of my smg 530h dous it just reboot and also dont show anything after rebooting black screen appears it is going in download mode pls help me :crying::crying::crying::crying:

S5 Stuck on samsung logo after flashing Philz recovery

This is the first time I'm rooting my phone. Process went smooth upto granting Super user excess to RashR (Flash Tool). And Download Philz Recovery Zip. After that I can only see Samsung Logo. Please Help!
PS: It's not going into Recovery Mode.

What S5 variant do you have and what version of Android are you running?

InsanePostman said:
What S5 variant do you have and what version of Android are you running?
Click to expand...
Click to collapse
G900H. Lollipop. I used Odin with this file - CF-Auto-Root-k3g-k3gxx-smg900h.tar (the process I used for rooting). It has come out of boot sleep. When I'm trying to go into recovery mode, it gets stuck at Logo. My phone is working right now but doesn't go into recovery mode. Can you help me solve this? I want to try Marshmallow. Thanks!

make sure the MD5 hash matches, if you don't know how to hash MD5 look it up, if it fails just redownload the recovery tar because your download was corrupted
---------- Post added at 02:48 PM ---------- Previous post was at 02:48 PM ----------
and don't use download managers

complexiscool said:
G900H. Lollipop. I used Odin with this file - CF-Auto-Root-k3g-k3gxx-smg900h.tar (the process I used for rooting). It has come out of boot sleep. When I'm trying to go into recovery mode, it gets stuck at Logo. My phone is working right now but doesn't go into recovery mode. Can you help me solve this? I want to try Marshmallow. Thanks!
Click to expand...
Click to collapse
Try to flash TWRP recovery

Use ODIN to flash recovery, not some flash tool from G Play, it might have flashed the wrong version recovery
With ODIN, you do it manually, so if you flash the wrong version, it's because you didn't check it first, not because you let some random app do it for you

*Detection* said:
Use ODIN to flash recovery, not some flash tool from G Play, it might have flashed the wrong version recovery
With ODIN, you do it manually, so if you flash the wrong version, it's because you didn't check it first, not because you let some random app do it for you
Click to expand...
Click to collapse
Hi,
Can you please refer a link which I can follow. I followed steps from a youtube video(with a good number of likes and views) which lead to this. I've zero experience in rooting and all. Any help will be highly appreciated. Thanks!

complexiscool said:
Hi,
Can you please refer a link which I can follow. I followed steps from a youtube video(with a good number of likes and views) which lead to this. I've zero experience in rooting and all. Any help will be highly appreciated. Thanks!
Click to expand...
Click to collapse
Loads of guides kicking about here in the S5 forum
Basically grab TWRP 2.8.7.0 .TAR for your model S5, load it into the AP or PDA section of ODIN, put your phone in download mode (Vol down & Home & Power from a powered off state), connect phone to PC USB, make sure drivers are installed, then hit start on ODIN
It should start the flashing process, and say success once done

*Detection* said:
Loads of guides kicking about here in the S5 forum
Basically grab TWRP 2.8.7.0 .TAR for your model S5, load it into the AP or PDA section of ODIN, put your phone in download mode (Vol down & Home & Power from a powered off state), connect phone to PC USB, make sure drivers are installed, then hit start on ODIN
It should start the flashing process, and say success once done
Click to expand...
Click to collapse
I tried using Odin and nothing happened. Tried using TWRP Manager. Getting this error - "Either you already have this recovery installed or another error has occured. Would you like to attempt rebooting to recovery now?"

complexiscool said:
I tried using Odin and nothing happened. Tried using TWRP Manager. Getting this error - "Either you already have this recovery installed or another error has occured. Would you like to attempt rebooting to recovery now?"
Click to expand...
Click to collapse
What do you mean, nothing happened with ODIN?
Did you add the TWRP .TAR (Do not extract)?
Phone was in download mode?
Drivers were installed?
Could ODIN see the phone? Did it show the COM port at the top?

*Detection* said:
What do you mean, nothing happened with ODIN?
Did you add the TWRP .TAR (Do not extract)?
Phone was in download mode?
Drivers were installed?
Could ODIN see the phone? Did it show the COM port at the top?
Click to expand...
Click to collapse
1. I meant when I clicked on Start, a blue bar came in download mode, and phone restarted.
2. Yes
3. Yes
4. Yes

complexiscool said:
1. I meant when I clicked on Start, a blue bar came in download mode, and phone restarted.
2. Yes
3. Yes
4. Yes
Click to expand...
Click to collapse
OK, a common problem
Uncheck the "Auto reboot" setting in ODIN
When it's finished flashing, unplug the phone and pull the battery out of the phone, replace it, and boot straight into recovery with vol up, Home and Power

stock kernel on S6 edge+?

hey guys, i just tryed to install a rooted kernel on my s6 edge s6+ (g928f) and now it just says "kernel is not seandroid secure" what to do? i have tryed different kernels... and it wont start at all do you guys have an idea of what to to? its all stock firmware, no CWM or anything installed

you make a nandroid backup bevor?

Same problem
Verstuurd van mijn SM-G928F met xda-developers.com, mogelijk gemaakt door appyet.com

Same problem x2

In a other post some one tell me how to fix it , and it works for mee my sm g928f is rooted later today i will post it in this threat

Originally Posted by agantal864
Note: i am not responsible for any damage taken using this method just follow the instruction properly and you will not have any problems
Your phones version should be marshmallow 6.0.1 dont use this if your version is lollipop
Prerequisites:
Odin,Twrp,samsung usb drivers,supersu beta by chainfire,a computer and usb cable
Links for download is below
Procedures:
1.install samsung usb drivers to your computer
2.copy twrp file to your computer in desktop(if its extension is .zip then extract it, then if its .img then leave it)
3.copy odin file to your pc in desktop and extract it
4.copy supersu file to your internal memory, be sure to memorize where you put the file
5.open odin.exe file in desktop, go to option, untick auto reboot,and leave everything else.
6.from your phone go to developer options, (to go there click build number many times) now find oem unlocking and enable it .. (Just to be sure remove google account and screen lock to avoid frp lock)
7.power off your phone and go to download mode(to go there,hold power button,volume down button,and home button simultaneously, and press volume up to enter dl mode)
8.plug your phone to pc (be sure you followed step 4 or else you may get dm verification) just follow everything else correctly and your good to go
9.now go to odin and click AP button,a file explorer will appear and find the twrp file and select it and then click start
10.you will see the message in odin PASS
11.this is important step.... Now click all the button of your phone, as soon as it gets out to download mode quickly unpress volume down leaving only power,home,volume up button
12 keep pressing those 3 buttons until you will see red message in upper left but just ignore it and keep pressing the button
13 and now twrp will be open and it will say allow modification? Be sure supersu file is already stored in your phone storage to apply patch
Now swipe right to allow
14. Now go to the box saying install and find your supersu file and select and install it(swipe right to install)
15.Super su file will be installed and patch will be applied and after it is done, click reboot system..
Now your phone will reboot and wait
You now have root access and custom recovery installed , to check root, download supersu in play store and root checker,
Download link:
ODIN link: http://uploaded.net/file/6xtojk1o
TWRP link: https://dl.twrp.me/noblelte/twrp-3.0...eltezt.img.tar
supersu: https://download.chainfire.eu/924/Su...0228150503.zip
USB drivers link: http://developer.samsung.com/technic...o?v=T000000117
REFERENCE: http://www.androidsis.com/recovery-r...-s6-edge-plus/
THIS one works for me

root zte v6 plus?

Anyone know if there is root for ZTE Blade v6 Plus, thank you.

Anyone? I Tried kingroot didnt work

checho5123 said:
Anyone? I Tried kingroot didnt work
Click to expand...
Click to collapse
same here tried with several rooting apps still nothing

I get something
First activate the debbug usb and the bootloader, get a custom recovery (twrp for ZTE blade v7 lite), and flash with sp flash tool, activate the usb debbug and bootloader, then having the beta supersu install it since twrp. The files you use are the same as the ZTE BLADE V7 Lite as they have the same SOC MT6735 and andriod 6.0 ... look for them in google
I regret to say that the operation is successful but the device continues with the same stock recovery.
Try it and tell me if it works for you.

Zaidlion said:
First activate the debbug usb and the bootloader, get a custom recovery (twrp for ZTE blade v7 lite), and flash with sp flash tool, activate the usb debbug and bootloader, then having the beta supersu install it since twrp. The files you use are the same as the ZTE BLADE V7 Lite as they have the same SOC MT6735 and andriod 6.0 ... look for them in google
I regret to say that the operation is successful but the device continues with the same stock recovery.
Try it and tell me if it works for you.
Click to expand...
Click to collapse
but you were able to get rooted on account of this?

Smashhead85 said:
but you were able to get rooted on account of this?
Click to expand...
Click to collapse
I already did root zte blade v6 plus, the process is very simple only the most recent spflash tool is needed, that you have MTK drivers well installed, I have recovery and supersu v2.78. At first I put the stock recovery but I would flash it but just change pc and I went back to do the process and it worked.
I do not know, can I link here? Or how can I help you?

Zaidlion said:
I already did root zte blade v6 plus, the process is very simple only the most recent spflash tool is needed, that you have MTK drivers well installed, I have recovery and supersu v2.78. At first I put the stock recovery but I would flash it but just change pc and I went back to do the process and it worked.
I do not know, can I link here? Or how can I help you?
Click to expand...
Click to collapse
For sure a link or two would be appreciated...bcuz i have not been able to root my zte v6 plus

Smashhead85 said:
For sure a link or two would be appreciated...bcuz i have not been able to root my zte v6 plus
Click to expand...
Click to collapse
On some devices the root can not be installed, because they have blocked the flash but I am seeing how to modify this and so share it with you.
1.- activate usb debugging
2.-put the supersu file in the root of sd or internal memory
2.- install mtk DRIVERS on your pc
4.-Unzip the rar file on your desktop
3.-open spflashtool and select scatter-loading, load the file MT6735P_Android_scatter.txt
4.-turn off your device, and do not connect ...
5.-In spflashtool press the DOWNLOAD button, then connect your device and do not disconnect until a green thing appears ..
6.-When the green thing appears, disconnect the cable and press the UP VOLUME button + POWER button, you will see in the lower left a few letters that you say Recovery Mode, you have to appear the TWRP recovery, if you have the stock Recovery means that your device has write protection, but if it appears you proceed to install the supersu that is very easy you can check some video on YouTube how to install it using the TWRP.
Nota,: how do i pass the files???

Zaidlion said:
On some devices the root can not be installed, because they have blocked the flash but I am seeing how to modify this and so share it with you.
1.- activate usb debugging
2.-put the supersu file in the root of sd or internal memory
2.- install mtk DRIVERS on your pc
4.-Unzip the rar file on your desktop
3.-open spflashtool and select scatter-loading, load the file MT6735P_Android_scatter.txt
4.-turn off your device, and do not connect ...
5.-In spflashtool press the DOWNLOAD button, then connect your device and do not disconnect until a green thing appears ..
6.-When the green thing appears, disconnect the cable and press the UP VOLUME button + POWER button, you will see in the lower left a few letters that you say Recovery Mode, you have to appear the TWRP recovery, if you have the stock Recovery means that your device has write protection, but if it appears you proceed to install the supersu that is very easy you can check some video on YouTube how to install it using the TWRP.
Nota,: how do i pass the files???
Click to expand...
Click to collapse
thank you it was successful and i searched Youtube and everybody seems to be using this method although the videos are in spanish
also for those wishing to follow suit
splflashtool,scatter, recovery TWRP: http://*******/1iawZh
SuperSU.zip: http://*******/1iax2p
credits to Noomkrad or whoever they belong to

Issue regarding flash twrp recovery

I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help

Salmaster007 said:
I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help
Click to expand...
Click to collapse
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy

aslam4580 said:
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy
Click to expand...
Click to collapse
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help

Salmaster007 said:
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help
Click to expand...
Click to collapse
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.

aslam4580 said:
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.
Click to expand...
Click to collapse
Still Im facing same issue

Which recovery are you using ? The one from Nick Verse won't work with the secure bootloader of the latest Mashmallow updates , when I tried i could not boot into recovery using that one ...
The one from this thread is working perfectly for me at the moment :
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960

Try the twrp made by ganesh varma.

1-in odin Untick Auto reboot option.
2-After flushing twrp by Odin, remove the battery and insert it again .
3- press volume up+ home+power button to go to twrt.
4- install supersu.zip
I had this issue on j5h but after doing that i could root my phone.

Thanks Guys for your help..