Hello,
I am trying to root my GT P7510, so I can allow it to accept ad hoc wifi connections.
So I tried this link from Android Authority called "How to Root the Samsung Galaxy Tab 10.1 WiFi GT-P7510" ( I can't post links yet).
Anyhoo - did all the steps...and nothing. No errors. A screen said it was done and gave credits. I tried to root check apps - both came up negative.
I tried these steps twice (see full below):
In recovery mode, choose “Install zip from sdcard,” then “Choose zip from sdcard,” locate and select “Samsung_Galaxy_Tab_10.1_root.zip”, and finally confirm flashing the ZIP file.
It says for "Samsung Galaxy Tab 10.1 GT-P7510 WiFi-only (Retail)" which is the version I have (16GB). Anything else I should check for?
Suggestions as to why it failed?
Where should I look? Running Android 4.04, Kernel 3.1.10. Any more info required? Any place I should be looking for a better way to do this?
Thanks,
V
Follow these:
Instructions
Download all the files you need as one package. Get the package here or here.
Extract the contents of the ZIP file into a folder on your computer. You’ll be getting the following components after extracting:
GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe
hc-3.1_ota-full_sam_tab_10.1.zip (Stock ROM) — Copy this to your tablet’s internal storage so that you will have a backup copy of your stock ROM in case you want to revert to it at some future date.
Odin3_v1.85.exe
recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5
stockretail.tar.md5 (stock recovery)
Samsung_Galaxy_Tab_10.1_root.zip
Install the USB drivers for the Galaxy Tab 10.1 (GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe). Or, you can install the drivers by installing Samsung KIES.
Enable USB Debugging on your tablet.
Turn off your tablet.
Reboot the tablet into Download Mode, as follows: hold down the Volume Down and Power buttons. Release the two buttons once you see the two icons on the tablet’s screen. Press the Volume Up button to go into Download Mode.
Run Odin3 on your computer.
Connect your tablet to your PC.
Click the PDA button in Odin3 and load “recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5″.
Under “Option”, check only “Auto Reboot” and “F. Reset Time.” Leave the other options unchecked.
Click the Start button in Odin3. Wait until Odin3 tells you that the process is successful.
Reboot your tablet.
Disconnect the tablet from the PC.
Turn off (disable) USB Debugging on the tablet.
Connect the tablet again to the PC. Choose “USB Mass Storage” as connection type.
Copy “Samsung_Galaxy_Tab_10.1_root.zip” to your tablet and take note of where you copied the file.
Disconnect the tablet from the PC.
Turn off the tablet.
Reboot into recovery as follows: hold down the Volume Down and Power buttons. Release the two buttons once you see the two icons on the tablet’s screen. Select Recovery from the options.
In recovery mode, choose “Install zip from sdcard,” then “Choose zip from sdcard,” locate and select “Samsung_Galaxy_Tab_10.1_root.zip”, and finally confirm flashing the ZIP file.
Reboot into normal mode.
Voila! Your Samsung Galaxy Tab 10.1 WiFi GT-P7510 is now rooted.
FYI - I did upgrade my version of android from 3.1 to 4.04 - does an upgrade - remove root access? Do I need a .zip file for ICS?
Thanks,
V
vivekvp said:
Hello,
I am trying to root my GT P7510, so I can allow it to accept ad hoc wifi connections.
So I tried this link from Android Authority called "How to Root the Samsung Galaxy Tab 10.1 WiFi GT-P7510" ( I can't post links yet).
Anyhoo - did all the steps...and nothing. No errors. A screen said it was done and gave credits. I tried to root check apps - both came up negative.
I tried these steps twice (see full below):
In recovery mode, choose “Install zip from sdcard,” then “Choose zip from sdcard,” locate and select “Samsung_Galaxy_Tab_10.1_root.zip”, and finally confirm flashing the ZIP file.
It says for "Samsung Galaxy Tab 10.1 GT-P7510 WiFi-only (Retail)" which is the version I have (16GB). Anything else I should check for?
Suggestions as to why it failed?
Where should I look? Running Android 4.04, Kernel 3.1.10. Any more info required? Any place I should be looking for a better way to do this?
Thanks,
V
Follow these:
Instructions
Download all the files you need as one package. Get the package here or here.
Extract the contents of the ZIP file into a folder on your computer. You’ll be getting the following components after extracting:
GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe
hc-3.1_ota-full_sam_tab_10.1.zip (Stock ROM) — Copy this to your tablet’s internal storage so that you will have a backup copy of your stock ROM in case you want to revert to it at some future date.
Odin3_v1.85.exe
recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5
stockretail.tar.md5 (stock recovery)
Samsung_Galaxy_Tab_10.1_root.zip
Install the USB drivers for the Galaxy Tab 10.1 (GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe). Or, you can install the drivers by installing Samsung KIES.
Enable USB Debugging on your tablet.
Turn off your tablet.
Reboot the tablet into Download Mode, as follows: hold down the Volume Down and Power buttons. Release the two buttons once you see the two icons on the tablet’s screen. Press the Volume Up button to go into Download Mode.
Run Odin3 on your computer.
Connect your tablet to your PC.
Click the PDA button in Odin3 and load “recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5″.
Under “Option”, check only “Auto Reboot” and “F. Reset Time.” Leave the other options unchecked.
Click the Start button in Odin3. Wait until Odin3 tells you that the process is successful.
Reboot your tablet.
Disconnect the tablet from the PC.
Turn off (disable) USB Debugging on the tablet.
Connect the tablet again to the PC. Choose “USB Mass Storage” as connection type.
Copy “Samsung_Galaxy_Tab_10.1_root.zip” to your tablet and take note of where you copied the file.
Disconnect the tablet from the PC.
Turn off the tablet.
Reboot into recovery as follows: hold down the Volume Down and Power buttons. Release the two buttons once you see the two icons on the tablet’s screen. Select Recovery from the options.
In recovery mode, choose “Install zip from sdcard,” then “Choose zip from sdcard,” locate and select “Samsung_Galaxy_Tab_10.1_root.zip”, and finally confirm flashing the ZIP file.
Reboot into normal mode.
Voila! Your Samsung Galaxy Tab 10.1 WiFi GT-P7510 is now rooted.
Click to expand...
Click to collapse
You need to update Superuser. Go to the Superuser site Here and download 3.1.3 ARM signed. Save it on your tablet's root, go into recovery, flash it and reboot...you should be fine after that. Come on back and let us know you're OK when you're done.
And guess what...it is Android verions specific....so Galaxy Tab Hacks .com helped me to do it.
Hopefully this thread helps someone else....
/galaxytabhacks.com/galaxy-tab-10-1-root/how-to-root-ics-on-galaxy-tab-10-1/
Thanks,
V
vivekvp said:
Hello,
I am trying to root my GT P7510, so I can allow it to accept ad hoc wifi connections.
So I tried this link from Android Authority called "How to Root the Samsung Galaxy Tab 10.1 WiFi GT-P7510" ( I can't post links yet).
Anyhoo - did all the steps...and nothing. No errors. A screen said it was done and gave credits. I tried to root check apps - both came up negative.
I tried these steps twice (see full below):
In recovery mode, choose “Install zip from sdcard,” then “Choose zip from sdcard,” locate and select “Samsung_Galaxy_Tab_10.1_root.zip”, and finally confirm flashing the ZIP file.
It says for "Samsung Galaxy Tab 10.1 GT-P7510 WiFi-only (Retail)" which is the version I have (16GB). Anything else I should check for?
Suggestions as to why it failed?
Where should I look? Running Android 4.04, Kernel 3.1.10. Any more info required? Any place I should be looking for a better way to do this?
Thanks,
V
Follow these:
Instructions
Download all the files you need as one package. Get the package here or here.
Extract the contents of the ZIP file into a folder on your computer. You’ll be getting the following components after extracting:
GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe
hc-3.1_ota-full_sam_tab_10.1.zip (Stock ROM) — Copy this to your tablet’s internal storage so that you will have a backup copy of your stock ROM in case you want to revert to it at some future date.
Odin3_v1.85.exe
recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5
stockretail.tar.md5 (stock recovery)
Samsung_Galaxy_Tab_10.1_root.zip
Install the USB drivers for the Galaxy Tab 10.1 (GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe). Or, you can install the drivers by installing Samsung KIES.
Enable USB Debugging on your tablet.
Turn off your tablet.
Reboot the tablet into Download Mode, as follows: hold down the Volume Down and Power buttons. Release the two buttons once you see the two icons on the tablet’s screen. Press the Volume Up button to go into Download Mode.
Run Odin3 on your computer.
Connect your tablet to your PC.
Click the PDA button in Odin3 and load “recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5″.
Under “Option”, check only “Auto Reboot” and “F. Reset Time.” Leave the other options unchecked.
Click the Start button in Odin3. Wait until Odin3 tells you that the process is successful.
Reboot your tablet.
Disconnect the tablet from the PC.
Turn off (disable) USB Debugging on the tablet.
Connect the tablet again to the PC. Choose “USB Mass Storage” as connection type.
Copy “Samsung_Galaxy_Tab_10.1_root.zip” to your tablet and take note of where you copied the file.
Disconnect the tablet from the PC.
Turn off the tablet.
Reboot into recovery as follows: hold down the Volume Down and Power buttons. Release the two buttons once you see the two icons on the tablet’s screen. Select Recovery from the options.
In recovery mode, choose “Install zip from sdcard,” then “Choose zip from sdcard,” locate and select “Samsung_Galaxy_Tab_10.1_root.zip”, and finally confirm flashing the ZIP file.
Reboot into normal mode.
Voila! Your Samsung Galaxy Tab 10.1 WiFi GT-P7510 is now rooted.
Click to expand...
Click to collapse
Yep, that works too. Only difference is this guy's root zip contains SuperSU rather than Superuser. Either way works congratulations, you're rooted!
djmatt604 said:
Yep, that works too. Only difference is this guy's root zip contains SuperSU rather than Superuser. Either way works congratulations, you're rooted!
Click to expand...
Click to collapse
I was struggling with a similar issue, the Superuser root failed in spite of repeated attempts. This one worked first try!
thanks vivekvp, this tutorial WORKS!
for others, be sure to run supersu after and grant what you want
No go
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> recovery-CWM5504-P4-P7500.tar.md5 is invalid.
<OSM> End...
Gives me invalid MD5.
Problem solved! Renamed to recovery-CWM5504-P4-P7500.tar
Installed fine, and the root worked fine as well. All good, and thanks.
Yippee
Thanks heaps vivekvp. I've rooted my tablet about 20 times, managed to soft brick it in the process, restored the firmware and still had no SU privileges until I found this thread. This is would appear is all I required in the first place. I can now get su working and can copy up DB's I require for development purposes.
Thanks a bundle.:good:
RECOVERY GUIDE
Flash signed recovery zip - Easiest way
1. The most common way is to simply flash Phil3759's Enhanced ClockWorkMod Touch.
2. Download the .zip file and copy it to your external sdcard
3. Then, reboot into the stock recovery (power off the phone and turn it on with home button and volume+ button pressed)
4. Choose "install zip from external storage" and select the already mentioned zip
5. Reboot. This should be enough!!
This is the easiest method, thus the followings are meant to be attempted only if you had problems with the previous
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Odin - If you have a computer available
1. If you have any errors try going back to the Phil Download Home and instead download the latest i9100 .tar.md5 file
2. Download Odin 1.85 and unzip the archive
3. Open the executable and add the previously downloaded .md5 into the PDA field
4. Put the phone into Download mode (power off the phone and turn it on with home button and volume- button pressed)
5. Connect it to the computer and wait till drivers installation is finished
6. Start flashing
7. (optional) If you want to remove the yellow triangle, check Chainfire's Triangle Away
Mobile Odin - When you have nothing but errors
0. You'll need Chainfire's Mobile Odin. Show him your gratitude and buy the app if you want! :laugh:
1. Root your phone. If that doesn't work, try "Xperia Root by cubeundcube"
2. Download Dorimanx Kernel (one of the .md5 packages)
3. Open Mobile Odin and grant it root permissions
4. "Open file" and select the .md5 file
5. Follow instructions and go!
Reserved.
I would like to point out i made yet another guide for gs2, because yesterday I went to "unlock" my mum's i9100 and I had a very time
If somebody wrote a more comprehensive guide, sorry i miss it
This is similar but not same http://forum.xda-developers.com/showthread.php?t=2088427 BK201EKY' s guide
the difference you will get the non-touched latest stock rom rooted and cwm recovery enabled.
(this means no visual and other modifications, pure stock rom & rooted & cwm installed)
What we need?
1. Latest stock rom "P1010KPO_P1010XEUKPO_HOME.tar.md5"
Download from : http://www.sammobile.com
2. Root and CWM for KPI Rom "madteam-cwm-p1010-kpi.tar"
Download from madteam: http://sourceforge.net/projects/jbro...i.tar/download
3. Wifi Fix for KPO rom "wifi.zip"
Download form: https://www.dropbox.com/s/n69ulrcts1h7ue2/wifi.zip
(This file need to be pasted to fix Wifi error after the madteam-cwm-p1010-kpi.tar flashed on KPO ROM - how to explained in the step)
4. Odin and USB drivers if you need
For odin: http://sourceforge.net/projects/jbro...1.zip/download
For USB drivers: http://hotfile.com/dl/133929348/9107...300_0.zip.html
Steps:
1. Flash the latest KPO rom with odin.
-Turn off tablet and turn it on while volume key is down. (Download mode) then Connect to your computers usb port
- run odin exe see the yellow com port (if not load the usb drivers first and if you have kies installed disable or uninstall it before)
- uncheck te reparitition only only auto restart and f. reset time is checked
- click to the pda buton and slect the "P1010KPO_P1010XEUKPO_HOME.tar.md5 file then click start and wait for the tablet boots and home screen shows
2. Download and install es file manager from play store
3. Create a folder Extract the wifi zip into a sd-card then instert the card to your tablet (or use internal memory)
4. Flashing the KPI rooted kernel and CWM
-Turn off tablet and turn it on while volume key is down. (Download mode) then Connect to your computers usb port
- run odin exe see the yellow com port (if not load the usb drivers first and if you have kies installed disable or uninstall it before)
- uncheck te reparitition only only auto restart and f. reset time is checked
- click to the pda buton and slect the madteam-cwm-p1010-kpi.tar file then click start and wait for the tablet boots and home screen shows
5. Run ES file manager and get the root access, (get the RW access "/" and "/system" )
6. Copy& paste the extracted files in step 3 to te /system/etc/wifi (replace files when asked)
7. reboot your tablet and now you have non touched stock rom, rooted, cwm installed and wifi error fixed.
if duplicated sorry. İ searched but not found a root methot for the KPO rom without any modifications, then found the non-english sites for the wifi.zip trick and it worked for me then i want to share.... :good:
Xposed framework for GB devices can be found here --> http://forum.xda-developers.com/showpost.php?p=44034334
How to Root Samsung Galaxy J7 (SM-J700H) Exynos 3G Model & TWRP.
Please Follow step by step guides.....
***Things You Need:
Windows PC
USB Cable
80% Battery Charge available
***Please do a backup of your important files, cause if you do anything wrong or softbrick your mobile***
• 1st Download the rar file from Link (Delete Spaces) and extract the folder. Link: https: //mega. nz/#!VFgCGDpS!4fm1uvNRORAkrkQJ0KdaoiRCVS_sCaw3TVYJjHzinAU
• Then into the folder Install Samsung USB drivers in your PC.
• Now go to your mobile Settings>About Device>Build Number (Tap Continuously 7 times to enable Developer Options)
• Then connect your Mobile to your PC via USB cable and copy the "UPDATE-SuperSU-v2.46.zip" file to the internal storage of the phone. Don't extract this file.
• Enable USB Debugging on your device. (Settings > Developer Options > USB Debugging)
• You need to enable OEM bootloader unlock in your developer options to install the TWRP recovery! Go to > ‘Settings’ > ‘Developer Options’ > ‘Turn on OEM unlock’ on.
***Install TWRP Recovery:
1. Open Odin_v3.09 folder on your PC and double click "Odin3 v3.09.exe" file. This will open an Odin window.
2. Boot your Galaxy J7 into Download mode: Turn off your mobile. Press (Volume Down) + (Home) + (Power) button together and hold them until you see Samsung logo. Release them once you encounter a warning screen on your device. Press Volume Up to acknowledge the warning. This takes you to download mode.
3. Connect your Mobile device to the PC using an USB cable and make sure your device is detected. An “Added!! message will appear in Odin’s message box.
4. Now Set up Odin as follows:
Check the AP box add the "twrp-2.8.7.0-j7elte.tar" file. (Do not extract it)
Check Auto Reboot and F.Reset Time options.
See Odin Setup Image Here (Delete Spaces). Link: https: //mega. nz/#!tZ5wkaBa!Ul8cnigZIIOSdPYiIGJvtIzfdf58h_4hWFDbBh1uLb4
5. Then click START button on Odin to begin the installation process.
6. After your device is rebooted you will see “PASS!” message in Odin and quickly remove your battery whenever you see Samsung logo on Startup.
***Rooting Your Device:
• Now put your mobile battery back and press (Volume Up) + (Home) + (Power) buttons together until you see Samsung logo. It will boot your mobile into TWRP recovery mode.
• Select Install Zip from TWRP.
• Now locate to Internal or External storage where you copied the "UPDATE-SuperSU-v2.46.zip" files before and select this file to Install. Slide to unlock, it will install the "UPDATE-SuperSU-v2.46.zip" into your mobile.
• Now reboot your Mobile.
After some minutes your phone will reboot. You will find your device rooted and SuperSU App installed.
You have successfully rooted Samsung Galaxy J7 with TWRP recovery installed.
To check your device rooted or not? You can test it by an app called "Root Checker". You can download this from Play Store.
Hit Thanks Button Please! :good:
What will happen if you don't pull off the battery? Will it softbrick the phone?
Bipinpdl said:
What will happen if you don't pull off the battery? Will it softbrick the phone?
Click to expand...
Click to collapse
It should work fine without removing battery but few phones can't go to TWRP mode. And this tricks wored for them, that's it! Hope you understand. Let me know if it worked for u and Hit the thanks button for me!
First and most important thing for installing/upgrading to Stock MM is clean install (even for Odin flash). That`s why we need a WIPED device. And if you fellow this step, then hopefully you`ll never get any issues (bootloop, abnormal battery drain etc). and this is for rooted devices with custom recovery (TWRP).
I always follow these setps.
DO it at your own risk.
1. Go to TWRP Recovery mode (by pressing volume up + power + home button)
2. Enter in Wipe menu
3. Advance wipe
4. Tick Cashe,Data, System, Internal Storage (except external storage/ Micro SD Card) and swipe to wipe.
5. Go to Reboot menu.
6. Power off the device. (Ignore " No OS Installed " message).
7. Open back cover and pull out Sim cards and Memory card(if any).
8. Download Odin ( I use v.3.11.1).
http://forum.xda-developers.com/showthread.php?t=2711451
9. Install essential drivers for your device in your PC/Laptop..
10. Download Stock MM (latest) Firmware for your Device from sammobile.
http://www.sammobile.com/firmwares/database/SM-J700F/
11. Extract (.tar.md5) it in Odin folder.
12. Go to Download Mode (volume down + power + home button and then volume up)
13. Open odin
14. Connect your device with Original Usb cable.
15. Odin will say "Added" once you connected your device. If not, then check all the drivers and Usb cable.
16. In Odin, make sure "Auto Reboot " and "F. Reset Time" options are Ticked.
17. And make sure "Re Partition" option is not ticked Or marked (checke twice). Don`t touch any other options in Odin.
18. Click on "AP" tab and select the firmware you extracted earlier for your device (.tar).
19. check again everything.
20. If everything is OK. then click on "Start" and sit back.
Odin will display "PASS", when it completed.
And your device will reboot.
After setting your device, power off your device and insert Sim cards (must) and Memory card (optional).
Switch on your device.
Here you can check for the latest software update for your device again. If any update is available, it`ll ask for download and install the latest OS. you should install this update (if available) with wifi/data connection. I`ve installed the latest "J700FXXU2BPG3_J700FODD2BPF9_INS.zip" and after setting the device for the first time, it asked for the OS update again. I downloaded and installed the update and it was "BPH2" with "August Security Patch".. And now I`ve "BPH2" in my device. And I think this the latest update from samsung for J700F.
AND AFTER THAT YOU SHOULD DO FACTORY RESET.
Now you can setup your device according to your wish. And enjoy new stock MM.
These are the steps , I always follow when installing /upgrading any samsung device and really it always provides a very stable and smooth performance.
I just share my procedures.Hope it helps.
HOW TO INSTALL TWRP RECOVERY IN MM J700F
----------------------------------------------------------------------
I`ve installed TWRP in J700F in MM successfully through this procedures.
I just share. Hope it helps.
Do it at your own risk.
1. Download Odin (I use v.3.11.1).
2. Download TWRP for samsung galaxy J7 (Just google it and you`ll find).
3. Open odin
4. Make sure only "F. Reset Time" option is ticked/marked. Here you should untick all options except "F. Resaet Time" ( "Auto Reboot" option should be unticked). And "Re-Partion" option must be unticked. Don`t touch any other options in Odin.
5. Switch off your device
6. Go to Download mode in your device
7. Click on "AP" tab and select "twrp-3.0.2-0-j7elte.img.tar".
8. Check again everything.
9. If everything is OK, then click on "Start".
10. Odin will display "PASS', when it completed.
11. After that unplug your device from PC and press volume down + power button and let your device reboot forcefully. Release volume down button and press volume up + home button as soon as you see the black screen. And your device should now be in TWRP mode.
Now you`ve TWRP in your device.
And Make a Nandroid backup first (it`s for future and safety).
HOW TO ROOT J700F IN STOCK MM
---------------------------------------------
You`ve install latest Stock MM and latest TWRP Recovery in your device successfully. Now you can root your device (certainly if you want).
I`ve rooted my J700f successfully (latest "BPH2" with "August Security Patch") with this procedure.
Do at your own risk.
1. Download Chainfire superSu ( I use BETA-SuperSU-v2.77-20160827190633.zip) and it will give you systemless root ( if you want to learn about systemlees root , here you go
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
2. Copy supersu.zip in your sd card
3. Go to TWRP
4. Select SuperSu.zip and Flash.
5.Reboot your device, when it completted.
And your device is now rooted and you`ll find SuperSu app in your app drawer. You can check rooting status with Root Checker App from google PlayStore.
HOW TO INSTALL XPOSED IN J700F IN STOCK MM
-------------------------------------------------
You can install Xposed in your device (J700F) in stock MM.
I`ve installed xposed in my J700F in Stock MM successfully.
Do it at your own risk.
1. Download "xposed-v86.1-sdk23-arm-custom-build-by-wanam-20160904.zip", " xposed-uninstaller-20150831-arm.zip" and "XposedInstaller_3.0_alpha4.apk".
Please follow this thread :
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
2. copy all the files in your sd-card.
3. Install "XposedInstaller_3.0_alpha4.apk" normally.
4. Switch off your device.
5. Go to TWRP.
6. Select "xposed-v86.1-sdk23-arm-custom-build-by-wanam-20160904.zip" and flash.
7. Reboot your device when it completted.
It`ll take some times to boot your device. After booting, you`ll find Xposed app in your app drawer. Install Modules according to your requirement and compatibility. And enjoy.