Database Users

guide how to root your s3 mini

this is a guide that helps you to root you gt-i8190 (only)
before we start make sure you have the s3 mini drivers on your pc if you dont have the drivers use this http ://g o o .gl /rZY cG (23 mb)
after this you will need odin h ttp :// goo .gl/T40ow (0.5 mb)
now download the rooted stock rom (android 4.1.1)(450 mb)http ://goo.gl/c 9Tmu
after that open odin in your computer (best option is run as administateur) unzip the rom file you will find a .tar file place it as pda in odin
be sure that only auto reboot and f.reset time and be very sure that you dont check re-partition
now reboot to download mode(power+home+volume down) and conect your phone to the pc
in odin you will see a comxx(xx can be any number)
press start and wait until finish then your phone will reboot
note: you may have a random reboots after rooting your phone to fix the problem go to recovery mode and select wipe data/factory reset
if you cant acces to recovery reboot to download mode and flash this as pda http :// goo.gl/8 s f 9 M (im recently subscribed to xda so icant post links yet:crying
congratulation your phone is now rooted and you can install costum recovery's roms...ect

Unleash your phone (aka install custom recovery). God has forgotten you edition

RECOVERY GUIDE
Flash signed recovery zip - Easiest way
1. The most common way is to simply flash Phil3759's Enhanced ClockWorkMod Touch.
2. Download the .zip file and copy it to your external sdcard
3. Then, reboot into the stock recovery (power off the phone and turn it on with home button and volume+ button pressed)
4. Choose "install zip from external storage" and select the already mentioned zip
5. Reboot. This should be enough!!
This is the easiest method, thus the followings are meant to be attempted only if you had problems with the previous
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Odin - If you have a computer available
1. If you have any errors try going back to the Phil Download Home and instead download the latest i9100 .tar.md5 file
2. Download Odin 1.85 and unzip the archive
3. Open the executable and add the previously downloaded .md5 into the PDA field
4. Put the phone into Download mode (power off the phone and turn it on with home button and volume- button pressed)
5. Connect it to the computer and wait till drivers installation is finished
6. Start flashing
7. (optional) If you want to remove the yellow triangle, check Chainfire's Triangle Away
Mobile Odin - When you have nothing but errors
0. You'll need Chainfire's Mobile Odin. Show him your gratitude and buy the app if you want! :laugh:
1. Root your phone. If that doesn't work, try "Xperia Root by cubeundcube"
2. Download Dorimanx Kernel (one of the .md5 packages)
3. Open Mobile Odin and grant it root permissions
4. "Open file" and select the .md5 file
5. Follow instructions and go!

Reserved.
I would like to point out i made yet another guide for gs2, because yesterday I went to "unlock" my mum's i9100 and I had a very time
If somebody wrote a more comprehensive guide, sorry i miss it

Can not install any other modem

I want to install any other modem but my note 3 does not let me do anything
I use Tweaked S5 Base Note 4 Style rom Android 4.4.2 Version 7.0
Modem is: XXUENB1
Build: KOT49H.G900SKSU1ANI1
I disabled already the reactivation protection, USB DEBUGGING is also enabled.
I use the original USB cable from note 3. KIES is not installed on my pc and I used ODIN as admin.
I got another modem, put my phone into download mode connected of course, and used another modem and put it into (CP/PHONE) in Odin3.10
It says, the flash is successfull but after reboot, the MODEM is NOT changed :"(
I tried several other modems but I can not seem to install any modem! HELP!
I tried to install stock rom via ODIN but it failed as the modem installation...
PS: Safestrap is on my device, my device is of course rooted and I also use PHILZ TOUCH 6

Did you follow this steps?:
1. Download the modem.
2. Unpack the rar file to anywhere on your computer, as long as you can access it.
3. Open up the included Odin and uncheck auto reboot.
4. Click on phone/CP, select the modem.bin, and press start.
5. When you finish the flash, manually reboot your phone back to download mode and flash the modem.bin one more time.
6. When the flash is complete, reboot and you're finished!

It's because you did not power off your phone, or remove the battery before doing the button combo for download mode, let it stay off for 15 seconds then try again.
Should work fine.

Okay, I will try to do the dual Flash and tell you if it works!

stock kernel on S6 edge+?

hey guys, i just tryed to install a rooted kernel on my s6 edge s6+ (g928f) and now it just says "kernel is not seandroid secure" what to do? i have tryed different kernels... and it wont start at all do you guys have an idea of what to to? its all stock firmware, no CWM or anything installed

you make a nandroid backup bevor?

Same problem
Verstuurd van mijn SM-G928F met xda-developers.com, mogelijk gemaakt door appyet.com

Same problem x2

In a other post some one tell me how to fix it , and it works for mee my sm g928f is rooted later today i will post it in this threat

Originally Posted by agantal864
Note: i am not responsible for any damage taken using this method just follow the instruction properly and you will not have any problems
Your phones version should be marshmallow 6.0.1 dont use this if your version is lollipop
Prerequisites:
Odin,Twrp,samsung usb drivers,supersu beta by chainfire,a computer and usb cable
Links for download is below
Procedures:
1.install samsung usb drivers to your computer
2.copy twrp file to your computer in desktop(if its extension is .zip then extract it, then if its .img then leave it)
3.copy odin file to your pc in desktop and extract it
4.copy supersu file to your internal memory, be sure to memorize where you put the file
5.open odin.exe file in desktop, go to option, untick auto reboot,and leave everything else.
6.from your phone go to developer options, (to go there click build number many times) now find oem unlocking and enable it .. (Just to be sure remove google account and screen lock to avoid frp lock)
7.power off your phone and go to download mode(to go there,hold power button,volume down button,and home button simultaneously, and press volume up to enter dl mode)
8.plug your phone to pc (be sure you followed step 4 or else you may get dm verification) just follow everything else correctly and your good to go
9.now go to odin and click AP button,a file explorer will appear and find the twrp file and select it and then click start
10.you will see the message in odin PASS
11.this is important step.... Now click all the button of your phone, as soon as it gets out to download mode quickly unpress volume down leaving only power,home,volume up button
12 keep pressing those 3 buttons until you will see red message in upper left but just ignore it and keep pressing the button
13 and now twrp will be open and it will say allow modification? Be sure supersu file is already stored in your phone storage to apply patch
Now swipe right to allow
14. Now go to the box saying install and find your supersu file and select and install it(swipe right to install)
15.Super su file will be installed and patch will be applied and after it is done, click reboot system..
Now your phone will reboot and wait
You now have root access and custom recovery installed , to check root, download supersu in play store and root checker,
Download link:
ODIN link: http://uploaded.net/file/6xtojk1o
TWRP link: https://dl.twrp.me/noblelte/twrp-3.0...eltezt.img.tar
supersu: https://download.chainfire.eu/924/Su...0228150503.zip
USB drivers link: http://developer.samsung.com/technic...o?v=T000000117
REFERENCE: http://www.androidsis.com/recovery-r...-s6-edge-plus/
THIS one works for me

How to install Stock MM Successfully (Odin) In J700F

First and most important thing for installing/upgrading to Stock MM is clean install (even for Odin flash). That`s why we need a WIPED device. And if you fellow this step, then hopefully you`ll never get any issues (bootloop, abnormal battery drain etc). and this is for rooted devices with custom recovery (TWRP).
I always follow these setps.
DO it at your own risk.
1. Go to TWRP Recovery mode (by pressing volume up + power + home button)
2. Enter in Wipe menu
3. Advance wipe
4. Tick Cashe,Data, System, Internal Storage (except external storage/ Micro SD Card) and swipe to wipe.
5. Go to Reboot menu.
6. Power off the device. (Ignore " No OS Installed " message).
7. Open back cover and pull out Sim cards and Memory card(if any).
8. Download Odin ( I use v.3.11.1).
http://forum.xda-developers.com/showthread.php?t=2711451
9. Install essential drivers for your device in your PC/Laptop..
10. Download Stock MM (latest) Firmware for your Device from sammobile.
http://www.sammobile.com/firmwares/database/SM-J700F/
11. Extract (.tar.md5) it in Odin folder.
12. Go to Download Mode (volume down + power + home button and then volume up)
13. Open odin
14. Connect your device with Original Usb cable.
15. Odin will say "Added" once you connected your device. If not, then check all the drivers and Usb cable.
16. In Odin, make sure "Auto Reboot " and "F. Reset Time" options are Ticked.
17. And make sure "Re Partition" option is not ticked Or marked (checke twice). Don`t touch any other options in Odin.
18. Click on "AP" tab and select the firmware you extracted earlier for your device (.tar).
19. check again everything.
20. If everything is OK. then click on "Start" and sit back.
Odin will display "PASS", when it completed.
And your device will reboot.
After setting your device, power off your device and insert Sim cards (must) and Memory card (optional).
Switch on your device.
Here you can check for the latest software update for your device again. If any update is available, it`ll ask for download and install the latest OS. you should install this update (if available) with wifi/data connection. I`ve installed the latest "J700FXXU2BPG3_J700FODD2BPF9_INS.zip" and after setting the device for the first time, it asked for the OS update again. I downloaded and installed the update and it was "BPH2" with "August Security Patch".. And now I`ve "BPH2" in my device. And I think this the latest update from samsung for J700F.
AND AFTER THAT YOU SHOULD DO FACTORY RESET.
Now you can setup your device according to your wish. And enjoy new stock MM.
These are the steps , I always follow when installing /upgrading any samsung device and really it always provides a very stable and smooth performance.
I just share my procedures.Hope it helps.

HOW TO INSTALL TWRP RECOVERY IN MM J700F
----------------------------------------------------------------------
I`ve installed TWRP in J700F in MM successfully through this procedures.
I just share. Hope it helps.
Do it at your own risk.
1. Download Odin (I use v.3.11.1).
2. Download TWRP for samsung galaxy J7 (Just google it and you`ll find).
3. Open odin
4. Make sure only "F. Reset Time" option is ticked/marked. Here you should untick all options except "F. Resaet Time" ( "Auto Reboot" option should be unticked). And "Re-Partion" option must be unticked. Don`t touch any other options in Odin.
5. Switch off your device
6. Go to Download mode in your device
7. Click on "AP" tab and select "twrp-3.0.2-0-j7elte.img.tar".
8. Check again everything.
9. If everything is OK, then click on "Start".
10. Odin will display "PASS', when it completed.
11. After that unplug your device from PC and press volume down + power button and let your device reboot forcefully. Release volume down button and press volume up + home button as soon as you see the black screen. And your device should now be in TWRP mode.
Now you`ve TWRP in your device.
And Make a Nandroid backup first (it`s for future and safety).

HOW TO ROOT J700F IN STOCK MM
---------------------------------------------
You`ve install latest Stock MM and latest TWRP Recovery in your device successfully. Now you can root your device (certainly if you want).
I`ve rooted my J700f successfully (latest "BPH2" with "August Security Patch") with this procedure.
Do at your own risk.
1. Download Chainfire superSu ( I use BETA-SuperSU-v2.77-20160827190633.zip) and it will give you systemless root ( if you want to learn about systemlees root , here you go
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
2. Copy supersu.zip in your sd card
3. Go to TWRP
4. Select SuperSu.zip and Flash.
5.Reboot your device, when it completted.
And your device is now rooted and you`ll find SuperSu app in your app drawer. You can check rooting status with Root Checker App from google PlayStore.

HOW TO INSTALL XPOSED IN J700F IN STOCK MM
-------------------------------------------------
You can install Xposed in your device (J700F) in stock MM.
I`ve installed xposed in my J700F in Stock MM successfully.
Do it at your own risk.
1. Download "xposed-v86.1-sdk23-arm-custom-build-by-wanam-20160904.zip", " xposed-uninstaller-20150831-arm.zip" and "XposedInstaller_3.0_alpha4.apk".
Please follow this thread :
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
2. copy all the files in your sd-card.
3. Install "XposedInstaller_3.0_alpha4.apk" normally.
4. Switch off your device.
5. Go to TWRP.
6. Select "xposed-v86.1-sdk23-arm-custom-build-by-wanam-20160904.zip" and flash.
7. Reboot your device when it completted.
It`ll take some times to boot your device. After booting, you`ll find Xposed app in your app drawer. Install Modules according to your requirement and compatibility. And enjoy.