This is similar but not same http://forum.xda-developers.com/showthread.php?t=2088427 BK201EKY' s guide
the difference you will get the non-touched latest stock rom rooted and cwm recovery enabled.
(this means no visual and other modifications, pure stock rom & rooted & cwm installed)
What we need?
1. Latest stock rom "P1010KPO_P1010XEUKPO_HOME.tar.md5"
Download from : http://www.sammobile.com
2. Root and CWM for KPI Rom "madteam-cwm-p1010-kpi.tar"
Download from madteam: http://sourceforge.net/projects/jbro...i.tar/download
3. Wifi Fix for KPO rom "wifi.zip"
Download form: https://www.dropbox.com/s/n69ulrcts1h7ue2/wifi.zip
(This file need to be pasted to fix Wifi error after the madteam-cwm-p1010-kpi.tar flashed on KPO ROM - how to explained in the step)
4. Odin and USB drivers if you need
For odin: http://sourceforge.net/projects/jbro...1.zip/download
For USB drivers: http://hotfile.com/dl/133929348/9107...300_0.zip.html
Steps:
1. Flash the latest KPO rom with odin.
-Turn off tablet and turn it on while volume key is down. (Download mode) then Connect to your computers usb port
- run odin exe see the yellow com port (if not load the usb drivers first and if you have kies installed disable or uninstall it before)
- uncheck te reparitition only only auto restart and f. reset time is checked
- click to the pda buton and slect the "P1010KPO_P1010XEUKPO_HOME.tar.md5 file then click start and wait for the tablet boots and home screen shows
2. Download and install es file manager from play store
3. Create a folder Extract the wifi zip into a sd-card then instert the card to your tablet (or use internal memory)
4. Flashing the KPI rooted kernel and CWM
-Turn off tablet and turn it on while volume key is down. (Download mode) then Connect to your computers usb port
- run odin exe see the yellow com port (if not load the usb drivers first and if you have kies installed disable or uninstall it before)
- uncheck te reparitition only only auto restart and f. reset time is checked
- click to the pda buton and slect the madteam-cwm-p1010-kpi.tar file then click start and wait for the tablet boots and home screen shows
5. Run ES file manager and get the root access, (get the RW access "/" and "/system" )
6. Copy& paste the extracted files in step 3 to te /system/etc/wifi (replace files when asked)
7. reboot your tablet and now you have non touched stock rom, rooted, cwm installed and wifi error fixed.
if duplicated sorry. İ searched but not found a root methot for the KPO rom without any modifications, then found the non-english sites for the wifi.zip trick and it worked for me then i want to share.... :good:
Xposed framework for GB devices can be found here --> http://forum.xda-developers.com/showpost.php?p=44034334
Hello ppl,
Please help me route me to the rooting my lollipop stock rom of N9005 LTE model with steps.
I've found lot of threads but most of them are not for stock rom and few of them is not clear enuf sorry to say that.
Thanks in Advance for your help.
Flash a custom recovery, TWRP.
Flash the SuperSU zip from the following link from that recovery, https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Done.
There are some theads about that. I had the same question today (for me) and searched here
But, I'm answering to help you.
Since i've Stock Lollipop and LTE version (N9005) and rooted a few hours ago, here's the simpliest method I've found: http://forum.xda-developers.com/showthread.php?t=2466423
Resuming for you from that topic you only need to download this:
SM-N9005 (International Qualcomm): CF-Auto-Root-hlte-hltexx-smn9005.zip
That rar have the img file you need, and the executable ODIN too.
How to root with odin:
-First extract all rar files (to a folder for example)
-Execute ODIN
-Power your Note 3 into Download Mode (vol down , front key, and power button at the same time for 3 secs)
-Connect it to your PC (if on the phone says to confirm entering to Download Mode (vol up) do it too)
-Check in ODIN if you phone was detected (on ID:COM appear blue, or on the message log appear <ID:.....> Added!!)
-On ODIN click on PDA, choose the CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 that you extracted from the rar file.
-Make sure that ONLY auto-reboot and f .reset time are checked.
-Press START.
Now If it fails because of something like Permission Denied or FAIL! (Auth) (check the ''Message'' on ODIN), you need to :
-get out of download mode (if necessary, remove the battery and put it again, and no, there's no problem with that)
-turn on your phone like normally
-go to Settings (General) - > Security, and uncheck Unknown Sources.
-Now repeat the process from the start.
If it PASS, yout phone will reboot, install SuperSU, reboot again, and work normally.
If you have a new app called SuperSU, your root is done Now you can use apps that requires root permition.
Note: this method doesn't requires a custom recovery.
catalao said:
There are some theads about that. I had the same question today (for me) and searched here
But, I'm answering to help you.
Since i've Stock Lollipop and LTE version (N9005) and rooted a few hours ago, here's the simpliest method I've found: http://forum.xda-developers.com/showthread.php?t=2466423
Resuming for you from that topic you only need to download this:
SM-N9005 (International Qualcomm): CF-Auto-Root-hlte-hltexx-smn9005.zip
That rar have the img file you need, and the executable ODIN too.
How to root with odin:
-First extract all rar files (to a folder for example)
-Execute ODIN
-Power your Note 3 into Download Mode (vol down , front key, and power button at the same time for 3 secs)
-Connect it to your PC (if on the phone says to confirm entering to Download Mode (vol up) do it too)
-Check in ODIN if you phone was detected (on ID:COM appear blue, or on the message log appear <ID:.....> Added!!)
-On ODIN click on PDA, choose the CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 that you extracted from the rar file.
-Make sure that ONLY auto-reboot and f .reset time are checked.
-Press START.
Now If it fails because of something like Permission Denied (check the ''Message'' on ODIN), you need to :
-get out of download mode (if necessary, remove the battery and put it again, and no, there's no problem with that)
-turn on your phone like normally
-go to Settings (General) - > Security, and uncheck Unknown Sources.
-Now repeat the process from the start.
If it PASS, yout phone will reboot, install SuperSU, reboot again, and work normally.
If you have a new app called SuperSU, your root is done Now you can use apps that requires root permition.
Note: this method doesn't requires a custom recovery.
Click to expand...
Click to collapse
You are the BOSS !!!
Phew it was soo simple!!! I was done rooting in 5 mins
Thank you soo much..
It doesn't work on mine note 3..
It fails, whatever I do, it fails..
imgurl
Any solutions?
I have same problem any solution? i have
Model SM-N9005
Model name GALAXY Note 3 LTE
Country Poland
Version Android 5.0
Changelist 4540543
Build date Mon, 26 Oct 2015 12:13:24 +0000
Product code XEO
PDA N9005XXUGBOJ6
CSC N9005XEOGBOJ1
thanks
catalao said:
There are some theads about that. I had the same question today (for me) and searched here
But, I'm answering to help you.
Since i've Stock Lollipop and LTE version (N9005) and rooted a few hours ago, here's the simpliest method I've found: http://forum.xda-developers.com/showthread.php?t=2466423
Resuming for you from that topic you only need to download this:
SM-N9005 (International Qualcomm): CF-Auto-Root-hlte-hltexx-smn9005.zip
That rar have the img file you need, and the executable ODIN too.
How to root with odin:
-First extract all rar files (to a folder for example)
-Execute ODIN
-Power your Note 3 into Download Mode (vol down , front key, and power button at the same time for 3 secs)
-Connect it to your PC (if on the phone says to confirm entering to Download Mode (vol up) do it too)
-Check in ODIN if you phone was detected (on ID:COM appear blue, or on the message log appear <ID:.....> Added!!)
-On ODIN click on PDA, choose the CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 that you extracted from the rar file.
-Make sure that ONLY auto-reboot and f .reset time are checked.
-Press START.
Now If it fails because of something like Permission Denied or FAIL! (Auth) (check the ''Message'' on ODIN), you need to :
-get out of download mode (if necessary, remove the battery and put it again, and no, there's no problem with that)
-turn on your phone like normally
-go to Settings (General) - > Security, and uncheck Unknown Sources.
-Now repeat the process from the start.
If it PASS, yout phone will reboot, install SuperSU, reboot again, and work normally.
If you have a new app called SuperSU, your root is done Now you can use apps that requires root permition.
Note: this method doesn't requires a custom recovery.
Click to expand...
Click to collapse
Does it trip the knox ??
klekot31 said:
It fails, whatever I do, it fails..
Any solutions?
Click to expand...
Click to collapse
Turn off reactivation lock??
Hope this helps,
Sam
selre said:
Turn off reactivation lock??
Hope this helps,
Sam
Click to expand...
Click to collapse
Thank you very much! Finally it worked
SM N9005 . is not rooting
Hi .
my SM N9005 . is not rooting. i have tried too many times. but it just stuck in the middle. :crying::crying::crying: I have waited upto 15 minutes but it doesn't move a little .... then i cancelled it..... knox is installed on my phone. Is its probleming...plz help....
What are you using to root.
Sent from my SM-N920C using XDA-Developers mobile app
To root the n9005, you could try cfautoroot if the ROM is supported: http://forum.xda-developers.com/idol-3/development/rom-6045-spb-1-0-stock-stable-fast-oc-t3392375
You could also root by installing TWRP and then flashing supersu from twrp.
Pleas help me I want to root my galaxy note 3 sm-n9005 united Arab Emirates
I have tried Odin mode after reboot I have a massage "can not boot normally....boot download mode" and then go back to download mode
Recovery mode cannot open again
And phone cannot reboot
Help please
---------- Post added at 03:13 AM ---------- Previous post was at 03:06 AM ----------
audit13 said:
To root the n9005, you could try cfautoroot if you ROM is supported: http://forum.xda-developers.com/idol-3/development/rom-6045-spb-1-0-stock-stable-fast-oc-t3392375
You could also root by installing TWRP and then flashing supersu from twrp.
Click to expand...
Click to collapse
How can I flash twrp widoout root phone
LEmethane said:
Pleas help me I want to root my galaxy note 3 sm-n9005 united Arab Emirates
I have tried Odin mode after reboot I have a massage "can not boot normally....boot download mode" and then go back to download mode
Recovery mode cannot open again
And phone cannot reboot
Help please
---------- Post added at 03:13 AM ---------- Previous post was at 03:06 AM ----------
How can I flash twrp widoout root phone
Click to expand...
Click to collapse
TWRP does not need root .
Flash TWRP tar through Odin .
SEE TWRP thread/ faqs guides .
Hey guys
i have a problem connecting my s3 neo (rooted and has cyanogenmod as a custom rom)
i searched and seems like a lot of people have the same issue
however i tried every solution they posted none of them worked
worth noting that the cyanogenmod version is unofficial
anyway i only want the usb connection to install the stock rom (so if anyone knows how i can actually install the stock rom without needing a usb connection will help)
Thanks
Hey
To flash a custom rom
1 download firmware from sammobile.com
2 install samsung usb drivers
3 download latest odin program from sammobile
4 unzip the firmware, open odin program as admin, select AP and select firmware path
5 power off your phone, and then boot it up in download mode by pressing (vol down+power)
6 make sure that only f.reset time and auto reboot and nand erase all are checked (that will erase everything)
7 connect your s3 neo to pc and click on START
It will take from 2 - 5 min to finish.
Press thanks if i helped you .
Before this issue happens i try to root my phone using King Root that i download from kingrootapk.com. After i run that apps my phone died. I try to switch on so many time but didnt work. I download stock ROM from firmwarefile.com for my phone version and run the Odin v 1.85.,.it detect my phone but failed to flash that stock ROM ...Please someone help me.
HELLO... your grand2 is softbricked
i can help you!!!
do this:
A.YOU NEED:
1. a windows os
2.your phone
3. download this stock prerooted https://www.androidfilehost.com/?fid=23329332407574426?fid=23329332407574426
4. download odin 3.09 http://www.devfiles.co/download/CAHmXM6c/Odin_v3.09.zip
5. YOU(lol)
B.1.switch your phone download mode ( power+volume down+home)
2. extract odin and stock prerooted
3. open odin 3.09 select pda or ap and select the extracted stock prerooted (NOT the .zip)
4.connect your phone and you will see in odin on upper right corner @[0:] or something like it means your phone connected
5.now press start and wait
6.let the phone boot alone(if it bootloop open recovery and wipe)
7.CONGRATULATIONS
8. you can open settings and see you baseband version and download the official stock
dont forget to press THANKS
If your stuck in a boot-loop and you have a broken Home button or Volume buttons (Heck may be even both ), you can't enter to recovery and fix the soft-brick. I had the same problem and after hours of searching i found a way to boot into recovery using odin.
Steps:
1. Use MICRO USB JIG to enter download mode (Can buy on ebay and local phone spare part shops)
2. Set odin settings to Auto Reboot, F.Reset Time. (Reccomended cf auto root odin, It is preset for this type of flashes)
3. Load tar.md5 to AP and flash it
Voila, Now you are on twrp :highfive::good:
Flash twrp image from sd card and use reboot to recovery option or you can flash a rom directly from this
(If you are on a stock rom it may get overwritten, so use above step to flash recovery)
For other phone models: Use cache.img in chainfire autoroot and recovery.img(Don't use the one that comes with cf auto-root) of your phone model and search & follow instructions to build a odin tar.md5. Make sure to follow file order(of your device) in odin tar other wise your phone will brick.
This is not my sole work. I only followed the instruction and built the odin tar.md5 file
Credits:
@Chainfire - For developing cf auto-root
@weehooherod2 - For giving the instructions